summaryrefslogtreecommitdiffstats
path: root/cpukit
diff options
context:
space:
mode:
authorcvs2git <rtems-devel@rtems.org>2011-03-18 10:11:30 +0000
committercvs2git <rtems-devel@rtems.org>2011-03-18 10:11:30 +0000
commitb40c451c061d0e5bfd030d12556b5ac2d702064f (patch)
tree5e7d6f4154396a53d6aa5ba54a426648d38de786 /cpukit
parente215a4e12558a820a54f8de58858a9f8fea77b04 (diff)
downloadrtems-b40c451c061d0e5bfd030d12556b5ac2d702064f.tar.bz2
This commit was manufactured by cvs2svn to create branch 'zlib'.
Cherrypick from master 2011-03-18 10:11:29 UTC Joel Sherrill <joel.sherrill@OARcorp.com> '2010-03-22 Joel Sherrill <joel.sherrill@oarcorp.com>': cpukit/zlib/doc/algorithm.txt cpukit/zlib/gzclose.c cpukit/zlib/gzguts.h cpukit/zlib/gzlib.c cpukit/zlib/gzread.c cpukit/zlib/gzwrite.c
Diffstat (limited to 'cpukit')
-rw-r--r--cpukit/zlib/doc/algorithm.txt209
-rw-r--r--cpukit/zlib/gzclose.c25
-rw-r--r--cpukit/zlib/gzguts.h132
-rw-r--r--cpukit/zlib/gzlib.c535
-rw-r--r--cpukit/zlib/gzread.c652
-rw-r--r--cpukit/zlib/gzwrite.c531
6 files changed, 2084 insertions, 0 deletions
diff --git a/cpukit/zlib/doc/algorithm.txt b/cpukit/zlib/doc/algorithm.txt
new file mode 100644
index 0000000000..34960bddac
--- /dev/null
+++ b/cpukit/zlib/doc/algorithm.txt
@@ -0,0 +1,209 @@
+1. Compression algorithm (deflate)
+
+The deflation algorithm used by gzip (also zip and zlib) is a variation of
+LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
+the input data. The second occurrence of a string is replaced by a
+pointer to the previous string, in the form of a pair (distance,
+length). Distances are limited to 32K bytes, and lengths are limited
+to 258 bytes. When a string does not occur anywhere in the previous
+32K bytes, it is emitted as a sequence of literal bytes. (In this
+description, `string' must be taken as an arbitrary sequence of bytes,
+and is not restricted to printable characters.)
+
+Literals or match lengths are compressed with one Huffman tree, and
+match distances are compressed with another tree. The trees are stored
+in a compact form at the start of each block. The blocks can have any
+size (except that the compressed data for one block must fit in
+available memory). A block is terminated when deflate() determines that
+it would be useful to start another block with fresh trees. (This is
+somewhat similar to the behavior of LZW-based _compress_.)
+
+Duplicated strings are found using a hash table. All input strings of
+length 3 are inserted in the hash table. A hash index is computed for
+the next 3 bytes. If the hash chain for this index is not empty, all
+strings in the chain are compared with the current input string, and
+the longest match is selected.
+
+The hash chains are searched starting with the most recent strings, to
+favor small distances and thus take advantage of the Huffman encoding.
+The hash chains are singly linked. There are no deletions from the
+hash chains, the algorithm simply discards matches that are too old.
+
+To avoid a worst-case situation, very long hash chains are arbitrarily
+truncated at a certain length, determined by a runtime option (level
+parameter of deflateInit). So deflate() does not always find the longest
+possible match but generally finds a match which is long enough.
+
+deflate() also defers the selection of matches with a lazy evaluation
+mechanism. After a match of length N has been found, deflate() searches for
+a longer match at the next input byte. If a longer match is found, the
+previous match is truncated to a length of one (thus producing a single
+literal byte) and the process of lazy evaluation begins again. Otherwise,
+the original match is kept, and the next match search is attempted only N
+steps later.
+
+The lazy match evaluation is also subject to a runtime parameter. If
+the current match is long enough, deflate() reduces the search for a longer
+match, thus speeding up the whole process. If compression ratio is more
+important than speed, deflate() attempts a complete second search even if
+the first match is already long enough.
+
+The lazy match evaluation is not performed for the fastest compression
+modes (level parameter 1 to 3). For these fast modes, new strings
+are inserted in the hash table only when no match was found, or
+when the match is not too long. This degrades the compression ratio
+but saves time since there are both fewer insertions and fewer searches.
+
+
+2. Decompression algorithm (inflate)
+
+2.1 Introduction
+
+The key question is how to represent a Huffman code (or any prefix code) so
+that you can decode fast. The most important characteristic is that shorter
+codes are much more common than longer codes, so pay attention to decoding the
+short codes fast, and let the long codes take longer to decode.
+
+inflate() sets up a first level table that covers some number of bits of
+input less than the length of longest code. It gets that many bits from the
+stream, and looks it up in the table. The table will tell if the next
+code is that many bits or less and how many, and if it is, it will tell
+the value, else it will point to the next level table for which inflate()
+grabs more bits and tries to decode a longer code.
+
+How many bits to make the first lookup is a tradeoff between the time it
+takes to decode and the time it takes to build the table. If building the
+table took no time (and if you had infinite memory), then there would only
+be a first level table to cover all the way to the longest code. However,
+building the table ends up taking a lot longer for more bits since short
+codes are replicated many times in such a table. What inflate() does is
+simply to make the number of bits in the first table a variable, and then
+to set that variable for the maximum speed.
+
+For inflate, which has 286 possible codes for the literal/length tree, the size
+of the first table is nine bits. Also the distance trees have 30 possible
+values, and the size of the first table is six bits. Note that for each of
+those cases, the table ended up one bit longer than the ``average'' code
+length, i.e. the code length of an approximately flat code which would be a
+little more than eight bits for 286 symbols and a little less than five bits
+for 30 symbols.
+
+
+2.2 More details on the inflate table lookup
+
+Ok, you want to know what this cleverly obfuscated inflate tree actually
+looks like. You are correct that it's not a Huffman tree. It is simply a
+lookup table for the first, let's say, nine bits of a Huffman symbol. The
+symbol could be as short as one bit or as long as 15 bits. If a particular
+symbol is shorter than nine bits, then that symbol's translation is duplicated
+in all those entries that start with that symbol's bits. For example, if the
+symbol is four bits, then it's duplicated 32 times in a nine-bit table. If a
+symbol is nine bits long, it appears in the table once.
+
+If the symbol is longer than nine bits, then that entry in the table points
+to another similar table for the remaining bits. Again, there are duplicated
+entries as needed. The idea is that most of the time the symbol will be short
+and there will only be one table look up. (That's whole idea behind data
+compression in the first place.) For the less frequent long symbols, there
+will be two lookups. If you had a compression method with really long
+symbols, you could have as many levels of lookups as is efficient. For
+inflate, two is enough.
+
+So a table entry either points to another table (in which case nine bits in
+the above example are gobbled), or it contains the translation for the symbol
+and the number of bits to gobble. Then you start again with the next
+ungobbled bit.
+
+You may wonder: why not just have one lookup table for how ever many bits the
+longest symbol is? The reason is that if you do that, you end up spending
+more time filling in duplicate symbol entries than you do actually decoding.
+At least for deflate's output that generates new trees every several 10's of
+kbytes. You can imagine that filling in a 2^15 entry table for a 15-bit code
+would take too long if you're only decoding several thousand symbols. At the
+other extreme, you could make a new table for every bit in the code. In fact,
+that's essentially a Huffman tree. But then you spend too much time
+traversing the tree while decoding, even for short symbols.
+
+So the number of bits for the first lookup table is a trade of the time to
+fill out the table vs. the time spent looking at the second level and above of
+the table.
+
+Here is an example, scaled down:
+
+The code being decoded, with 10 symbols, from 1 to 6 bits long:
+
+A: 0
+B: 10
+C: 1100
+D: 11010
+E: 11011
+F: 11100
+G: 11101
+H: 11110
+I: 111110
+J: 111111
+
+Let's make the first table three bits long (eight entries):
+
+000: A,1
+001: A,1
+010: A,1
+011: A,1
+100: B,2
+101: B,2
+110: -> table X (gobble 3 bits)
+111: -> table Y (gobble 3 bits)
+
+Each entry is what the bits decode as and how many bits that is, i.e. how
+many bits to gobble. Or the entry points to another table, with the number of
+bits to gobble implicit in the size of the table.
+
+Table X is two bits long since the longest code starting with 110 is five bits
+long:
+
+00: C,1
+01: C,1
+10: D,2
+11: E,2
+
+Table Y is three bits long since the longest code starting with 111 is six
+bits long:
+
+000: F,2
+001: F,2
+010: G,2
+011: G,2
+100: H,2
+101: H,2
+110: I,3
+111: J,3
+
+So what we have here are three tables with a total of 20 entries that had to
+be constructed. That's compared to 64 entries for a single table. Or
+compared to 16 entries for a Huffman tree (six two entry tables and one four
+entry table). Assuming that the code ideally represents the probability of
+the symbols, it takes on the average 1.25 lookups per symbol. That's compared
+to one lookup for the single table, or 1.66 lookups per symbol for the
+Huffman tree.
+
+There, I think that gives you a picture of what's going on. For inflate, the
+meaning of a particular symbol is often more than just a letter. It can be a
+byte (a "literal"), or it can be either a length or a distance which
+indicates a base value and a number of bits to fetch after the code that is
+added to the base value. Or it might be the special end-of-block code. The
+data structures created in inftrees.c try to encode all that information
+compactly in the tables.
+
+
+Jean-loup Gailly Mark Adler
+jloup@gzip.org madler@alumni.caltech.edu
+
+
+References:
+
+[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
+Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
+pp. 337-343.
+
+``DEFLATE Compressed Data Format Specification'' available in
+http://www.ietf.org/rfc/rfc1951.txt
diff --git a/cpukit/zlib/gzclose.c b/cpukit/zlib/gzclose.c
new file mode 100644
index 0000000000..caeb99a317
--- /dev/null
+++ b/cpukit/zlib/gzclose.c
@@ -0,0 +1,25 @@
+/* gzclose.c -- zlib gzclose() function
+ * Copyright (C) 2004, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* gzclose() is in a separate file so that it is linked in only if it is used.
+ That way the other gzclose functions can be used instead to avoid linking in
+ unneeded compression or decompression routines. */
+int ZEXPORT gzclose(file)
+ gzFile file;
+{
+#ifndef NO_GZCOMPRESS
+ gz_statep state;
+
+ if (file == NULL)
+ return Z_STREAM_ERROR;
+ state = (gz_statep)file;
+
+ return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file);
+#else
+ return gzclose_r(file);
+#endif
+}
diff --git a/cpukit/zlib/gzguts.h b/cpukit/zlib/gzguts.h
new file mode 100644
index 0000000000..0e7ed4330a
--- /dev/null
+++ b/cpukit/zlib/gzguts.h
@@ -0,0 +1,132 @@
+/* gzguts.h -- zlib internal header definitions for gz* operations
+ * Copyright (C) 2004, 2005, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#ifdef _LARGEFILE64_SOURCE
+# ifndef _LARGEFILE_SOURCE
+# define _LARGEFILE_SOURCE
+# endif
+# ifdef _FILE_OFFSET_BITS
+# undef _FILE_OFFSET_BITS
+# endif
+#endif
+
+#define ZLIB_INTERNAL
+
+#include <stdio.h>
+#include "zlib.h"
+#ifdef STDC
+# include <string.h>
+# include <stdlib.h>
+# include <limits.h>
+#endif
+#include <fcntl.h>
+
+#ifdef NO_DEFLATE /* for compatibility with old definition */
+# define NO_GZCOMPRESS
+#endif
+
+#ifdef _MSC_VER
+# include <io.h>
+# define vsnprintf _vsnprintf
+#endif
+
+#ifndef local
+# define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+/* gz* functions always use library allocation functions */
+#ifndef STDC
+ extern voidp malloc OF((uInt size));
+ extern void free OF((voidpf ptr));
+#endif
+
+/* get errno and strerror definition */
+#if defined UNDER_CE && defined NO_ERRNO_H
+# include <windows.h>
+# define zstrerror() gz_strwinerror((DWORD)GetLastError())
+#else
+# ifdef STDC
+# include <errno.h>
+# define zstrerror() strerror(errno)
+# else
+# define zstrerror() "stdio error (consult errno)"
+# endif
+#endif
+
+/* MVS fdopen() */
+#ifdef __MVS__
+ #pragma map (fdopen , "\174\174FDOPEN")
+ FILE *fdopen(int, const char *);
+#endif
+
+#ifdef _LARGEFILE64_SOURCE
+# define z_off64_t off64_t
+#else
+# define z_off64_t z_off_t
+#endif
+
+/* default i/o buffer size -- double this for output when reading */
+#define GZBUFSIZE 8192
+
+/* gzip modes, also provide a little integrity check on the passed structure */
+#define GZ_NONE 0
+#define GZ_READ 7247
+#define GZ_WRITE 31153
+#define GZ_APPEND 1 /* mode set to GZ_WRITE after the file is opened */
+
+/* values for gz_state how */
+#define LOOK 0 /* look for a gzip header */
+#define COPY 1 /* copy input directly */
+#define GZIP 2 /* decompress a gzip stream */
+
+/* internal gzip file state data structure */
+typedef struct {
+ /* used for both reading and writing */
+ int mode; /* see gzip modes above */
+ int fd; /* file descriptor */
+ char *path; /* path or fd for error messages */
+ z_off64_t pos; /* current position in uncompressed data */
+ unsigned size; /* buffer size, zero if not allocated yet */
+ unsigned want; /* requested buffer size, default is GZBUFSIZE */
+ unsigned char *in; /* input buffer */
+ unsigned char *out; /* output buffer (double-sized when reading) */
+ unsigned char *next; /* next output data to deliver or write */
+ /* just for reading */
+ unsigned have; /* amount of output data unused at next */
+ int eof; /* true if end of input file reached */
+ z_off64_t start; /* where the gzip data started, for rewinding */
+ z_off64_t raw; /* where the raw data started, for seeking */
+ int how; /* 0: get header, 1: copy, 2: decompress */
+ int direct; /* true if last read direct, false if gzip */
+ /* just for writing */
+ int level; /* compression level */
+ int strategy; /* compression strategy */
+ /* seek request */
+ z_off64_t skip; /* amount to skip (already rewound if backwards) */
+ int seek; /* true if seek request pending */
+ /* error information */
+ int err; /* error code */
+ char *msg; /* error message */
+ /* zlib inflate or deflate stream */
+ z_stream strm; /* stream structure in-place (not a pointer) */
+} gz_state;
+typedef gz_state FAR *gz_statep;
+
+/* shared functions */
+ZEXTERN void ZEXPORT gz_error OF((gz_statep, int, const char *));
+#if defined UNDER_CE && defined NO_ERRNO_H
+ZEXTERN char ZEXPORT *gz_strwinerror OF((DWORD error));
+#endif
+
+/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
+ value -- needed when comparing unsigned to z_off64_t, which is signed
+ (possible z_off64_t types off_t, off64_t, and long are all signed) */
+#ifdef INT_MAX
+# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
+#else
+ZEXTERN unsigned ZEXPORT gz_intmax OF((void));
+# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
+#endif
diff --git a/cpukit/zlib/gzlib.c b/cpukit/zlib/gzlib.c
new file mode 100644
index 0000000000..6fdb08a814
--- /dev/null
+++ b/cpukit/zlib/gzlib.c
@@ -0,0 +1,535 @@
+/* gzlib.c -- zlib functions common to reading and writing gzip files
+ * Copyright (C) 2004, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+#ifdef _LARGEFILE64_SOURCE
+# define LSEEK lseek64
+#else
+# define LSEEK lseek
+#endif
+
+/* Local functions */
+local void gz_reset OF((gz_statep));
+local gzFile gz_open OF((const char *, int, const char *));
+
+#if defined UNDER_CE && defined NO_ERRNO_H
+
+/* Map the Windows error number in ERROR to a locale-dependent error message
+ string and return a pointer to it. Typically, the values for ERROR come
+ from GetLastError.
+
+ The string pointed to shall not be modified by the application, but may be
+ overwritten by a subsequent call to gz_strwinerror
+
+ The gz_strwinerror function does not change the current setting of
+ GetLastError. */
+char ZEXPORT *gz_strwinerror (error)
+ DWORD error;
+{
+ static char buf[1024];
+
+ wchar_t *msgbuf;
+ DWORD lasterr = GetLastError();
+ DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
+ | FORMAT_MESSAGE_ALLOCATE_BUFFER,
+ NULL,
+ error,
+ 0, /* Default language */
+ (LPVOID)&msgbuf,
+ 0,
+ NULL);
+ if (chars != 0) {
+ /* If there is an \r\n appended, zap it. */
+ if (chars >= 2
+ && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
+ chars -= 2;
+ msgbuf[chars] = 0;
+ }
+
+ if (chars > sizeof (buf) - 1) {
+ chars = sizeof (buf) - 1;
+ msgbuf[chars] = 0;
+ }
+
+ wcstombs(buf, msgbuf, chars + 1);
+ LocalFree(msgbuf);
+ }
+ else {
+ sprintf(buf, "unknown win32 error (%ld)", error);
+ }
+
+ SetLastError(lasterr);
+ return buf;
+}
+
+#endif /* UNDER_CE && NO_ERRNO_H */
+
+/* Reset gzip file state */
+local void gz_reset(state)
+ gz_statep state;
+{
+ if (state->mode == GZ_READ) { /* for reading ... */
+ state->have = 0; /* no output data available */
+ state->eof = 0; /* not at end of file */
+ state->how = LOOK; /* look for gzip header */
+ state->direct = 1; /* default for empty file */
+ }
+ state->seek = 0; /* no seek request pending */
+ gz_error(state, Z_OK, NULL); /* clear error */
+ state->pos = 0; /* no uncompressed data yet */
+ state->strm.avail_in = 0; /* no input data yet */
+}
+
+/* Open a gzip file either by name or file descriptor. */
+local gzFile gz_open(path, fd, mode)
+ const char *path;
+ int fd;
+ const char *mode;
+{
+ gz_statep state;
+
+ /* allocate gzFile structure to return */
+ state = malloc(sizeof(gz_state));
+ if (state == NULL)
+ return NULL;
+ state->size = 0; /* no buffers allocated yet */
+ state->want = GZBUFSIZE; /* requested buffer size */
+ state->msg = NULL; /* no error message yet */
+
+ /* interpret mode */
+ state->mode = GZ_NONE;
+ state->level = Z_DEFAULT_COMPRESSION;
+ state->strategy = Z_DEFAULT_STRATEGY;
+ while (*mode) {
+ if (*mode >= '0' && *mode <= '9')
+ state->level = *mode - '0';
+ else
+ switch (*mode) {
+ case 'r':
+ state->mode = GZ_READ;
+ break;
+#ifndef NO_GZCOMPRESS
+ case 'w':
+ state->mode = GZ_WRITE;
+ break;
+ case 'a':
+ state->mode = GZ_APPEND;
+ break;
+#endif
+ case '+': /* can't read and write at the same time */
+ free(state);
+ return NULL;
+ case 'b': /* ignore -- will request binary anyway */
+ break;
+ case 'f':
+ state->strategy = Z_FILTERED;
+ break;
+ case 'h':
+ state->strategy = Z_HUFFMAN_ONLY;
+ break;
+ case 'R':
+ state->strategy = Z_RLE;
+ break;
+ case 'F':
+ state->strategy = Z_FIXED;
+ default: /* could consider as an error, but just ignore */
+ ;
+ }
+ mode++;
+ }
+
+ /* must provide an "r", "w", or "a" */
+ if (state->mode == GZ_NONE) {
+ free(state);
+ return NULL;
+ }
+
+ /* save the path name for error messages */
+ state->path = malloc(strlen(path) + 1);
+ if (state->path == NULL) {
+ free(state);
+ return NULL;
+ }
+ strcpy(state->path, path);
+
+ /* open the file with the appropriate mode (or just use fd) */
+ state->fd = fd != -1 ? fd :
+ open(path,
+#ifdef O_LARGEFILE
+ O_LARGEFILE |
+#endif
+#ifdef O_BINARY
+ O_BINARY |
+#endif
+ (state->mode == GZ_READ ?
+ O_RDONLY :
+ (O_WRONLY | O_CREAT | (
+ state->mode == GZ_WRITE ?
+ O_TRUNC :
+ O_APPEND))),
+ 0666);
+ if (state->fd == -1) {
+ free(state);
+ return NULL;
+ }
+ if (state->mode == GZ_APPEND)
+ state->mode = GZ_WRITE; /* simplify later checks */
+
+ /* save the current position for rewinding (only if reading) */
+ if (state->mode == GZ_READ) {
+ state->start = LSEEK(state->fd, 0, SEEK_CUR);
+ if (state->start == -1) state->start = 0;
+ }
+
+ /* initialize stream */
+ gz_reset(state);
+
+ /* return stream */
+ return (gzFile)state;
+}
+
+/* -- see zlib.h -- */
+gzFile ZEXPORT gzopen(path, mode)
+ const char *path;
+ const char *mode;
+{
+ return gz_open(path, -1, mode);
+}
+
+/* -- see zlib.h -- */
+gzFile ZEXPORT gzopen64(path, mode)
+ const char *path;
+ const char *mode;
+{
+ return gz_open(path, -1, mode);
+}
+
+/* -- see zlib.h -- */
+gzFile ZEXPORT gzdopen(fd, mode)
+ int fd;
+ const char *mode;
+{
+ char *path; /* identifier for error messages */
+ gzFile gz;
+
+ if (fd == -1 || (path = malloc(7 + 3 * sizeof(int))) == NULL)
+ return NULL;
+ sprintf(path, "<fd:%d>", fd);
+ gz = gz_open(path, fd, mode);
+ free(path);
+ return gz;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzbuffer(file, size)
+ gzFile file;
+ unsigned size;
+{
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return -1;
+
+ /* make sure we haven't already allocated memory */
+ if (state->size != 0)
+ return -1;
+
+ /* check and set requested size */
+ if (size == 0)
+ return -1;
+ state->want = size;
+ return 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzrewind(file)
+ gzFile file;
+{
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+
+ /* check that we're reading and that there's no error */
+ if (state->mode != GZ_READ || state->err != Z_OK)
+ return -1;
+
+ /* back up and start over */
+ if (LSEEK(state->fd, state->start, SEEK_SET) == -1)
+ return -1;
+ gz_reset(state);
+ return 0;
+}
+
+/* -- see zlib.h -- */
+z_off64_t ZEXPORT gzseek64(file, offset, whence)
+ gzFile file;
+ z_off64_t offset;
+ int whence;
+{
+ unsigned n;
+ z_off64_t ret;
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return -1;
+
+ /* check that there's no error */
+ if (state->err != Z_OK)
+ return -1;
+
+ /* can only seek from start or relative to current position */
+ if (whence != SEEK_SET && whence != SEEK_CUR)
+ return -1;
+
+ /* normalize offset to a SEEK_CUR specification */
+ if (whence == SEEK_SET)
+ offset -= state->pos;
+ else if (state->seek)
+ offset += state->skip;
+ state->seek = 0;
+
+ /* if within raw area while reading, just go there */
+ if (state->mode == GZ_READ && state->how == COPY &&
+ state->pos + offset >= state->raw) {
+ ret = LSEEK(state->fd, offset, SEEK_CUR);
+ if (ret == -1)
+ return -1;
+ state->have = 0;
+ state->eof = 0;
+ state->seek = 0;
+ gz_error(state, Z_OK, NULL);
+ state->strm.avail_in = 0;
+ state->pos += offset;
+ return state->pos;
+ }
+
+ /* calculate skip amount, rewinding if needed for back seek when reading */
+ if (offset < 0) {
+ if (state->mode != GZ_READ) /* writing -- can't go backwards */
+ return -1;
+ offset += state->pos;
+ if (offset < 0) /* before start of file! */
+ return -1;
+ if (gzrewind(file) == -1) /* rewind, then skip to offset */
+ return -1;
+ }
+
+ /* if reading, skip what's in output buffer (one less gzgetc() check) */
+ if (state->mode == GZ_READ) {
+ n = GT_OFF(state->have) || (z_off64_t)state->have > offset ?
+ (unsigned)offset : state->have;
+ state->have -= n;
+ state->next += n;
+ state->pos += n;
+ offset -= n;
+ }
+
+ /* request skip (if not zero) */
+ if (offset) {
+ state->seek = 1;
+ state->skip = offset;
+ }
+ return state->pos + offset;
+}
+
+/* -- see zlib.h -- */
+z_off_t ZEXPORT gzseek(file, offset, whence)
+ gzFile file;
+ z_off_t offset;
+ int whence;
+{
+ z_off64_t ret;
+
+ ret = gzseek64(file, (z_off64_t)offset, whence);
+ return ret == (z_off_t)ret ? (z_off_t)ret : -1;
+}
+
+/* -- see zlib.h -- */
+z_off64_t ZEXPORT gztell64(file)
+ gzFile file;
+{
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return -1;
+
+ /* return position */
+ return state->pos + (state->seek ? state->skip : 0);
+}
+
+/* -- see zlib.h -- */
+z_off_t ZEXPORT gztell(file)
+ gzFile file;
+{
+ z_off64_t ret;
+
+ ret = gztell64(file);
+ return ret == (z_off_t)ret ? (z_off_t)ret : -1;
+}
+
+/* -- see zlib.h -- */
+z_off64_t ZEXPORT gzoffset64(file)
+ gzFile file;
+{
+ z_off64_t offset;
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return -1;
+
+ /* compute and return effective offset in file */
+ offset = LSEEK(state->fd, 0, SEEK_CUR);
+ if (offset == -1)
+ return -1;
+ if (state->mode == GZ_READ) /* reading */
+ offset -= state->strm.avail_in; /* don't count buffered input */
+ return offset;
+}
+
+/* -- see zlib.h -- */
+z_off_t ZEXPORT gzoffset(file)
+ gzFile file;
+{
+ z_off64_t ret;
+
+ ret = gzoffset64(file);
+ return ret == (z_off_t)ret ? (z_off_t)ret : -1;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzeof(file)
+ gzFile file;
+{
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return 0;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return 0;
+
+ /* return end-of-file state */
+ return state->mode == GZ_READ ? (state->eof && state->have == 0) : 0;
+}
+
+/* -- see zlib.h -- */
+const char * ZEXPORT gzerror(file, errnum)
+ gzFile file;
+ int *errnum;
+{
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return NULL;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return NULL;
+
+ /* return error information */
+ if (errnum != NULL)
+ *errnum = state->err;
+ return state->msg == NULL ? "" : state->msg;
+}
+
+/* -- see zlib.h -- */
+void ZEXPORT gzclearerr(file)
+ gzFile file;
+{
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return;
+
+ /* clear error and end-of-file */
+ if (state->mode == GZ_READ)
+ state->eof = 0;
+ gz_error(state, Z_OK, NULL);
+}
+
+/* Create an error message in allocated memory and set state->err and
+ state->msg accordingly. Free any previous error message already there. Do
+ not try to free or allocate space if the error is Z_MEM_ERROR (out of
+ memory). Simply save the error message as a static string. If there is an
+ allocation failure constructing the error message, then convert the error to
+ out of memory. */
+void ZEXPORT gz_error(state, err, msg)
+ gz_statep state;
+ int err;
+ const char *msg;
+{
+ /* free previously allocated message and clear */
+ if (state->msg != NULL) {
+ if (state->err != Z_MEM_ERROR)
+ free(state->msg);
+ state->msg = NULL;
+ }
+
+ /* set error code, and if no message, then done */
+ state->err = err;
+ if (msg == NULL)
+ return;
+
+ /* for an out of memory error, save as static string */
+ if (err == Z_MEM_ERROR) {
+ state->msg = (char *)msg;
+ return;
+ }
+
+ /* construct error message with path */
+ if ((state->msg = malloc(strlen(state->path) + strlen(msg) + 3)) == NULL) {
+ state->err = Z_MEM_ERROR;
+ state->msg = (char *)"out of memory";
+ return;
+ }
+ strcpy(state->msg, state->path);
+ strcat(state->msg, ": ");
+ strcat(state->msg, msg);
+ return;
+}
+
+#ifndef INT_MAX
+/* portably return maximum value for an int (when limits.h presumed not
+ available) -- we need to do this to cover cases where 2's complement not
+ used, since C standard permits 1's complement and sign-bit representations,
+ otherwise we could just use ((unsigned)-1) >> 1 */
+unsigned ZEXPORT gz_intmax()
+{
+ unsigned p, q;
+
+ p = 1;
+ do {
+ q = p;
+ p <<= 1;
+ p++;
+ } while (p > q);
+ return q >> 1;
+}
+#endif
diff --git a/cpukit/zlib/gzread.c b/cpukit/zlib/gzread.c
new file mode 100644
index 0000000000..434ef023e0
--- /dev/null
+++ b/cpukit/zlib/gzread.c
@@ -0,0 +1,652 @@
+/* gzread.c -- zlib functions for reading gzip files
+ * Copyright (C) 2004, 2005, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* Local functions */
+local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
+local int gz_avail OF((gz_statep));
+local int gz_next4 OF((gz_statep, unsigned long *));
+local int gz_head OF((gz_statep));
+local int gz_decomp OF((gz_statep));
+local int gz_make OF((gz_statep));
+local int gz_skip OF((gz_statep, z_off64_t));
+
+/* Use read() to load a buffer -- return -1 on error, otherwise 0. Read from
+ state->fd, and update state->eof, state->err, and state->msg as appropriate.
+ This function needs to loop on read(), since read() is not guaranteed to
+ read the number of bytes requested, depending on the type of descriptor. */
+local int gz_load(state, buf, len, have)
+ gz_statep state;
+ unsigned char *buf;
+ unsigned len;
+ unsigned *have;
+{
+ int ret;
+
+ *have = 0;
+ do {
+ ret = read(state->fd, buf + *have, len - *have);
+ if (ret <= 0)
+ break;
+ *have += ret;
+ } while (*have < len);
+ if (ret < 0) {
+ gz_error(state, Z_ERRNO, zstrerror());
+ return -1;
+ }
+ if (ret == 0)
+ state->eof = 1;
+ return 0;
+}
+
+/* Load up input buffer and set eof flag if last data loaded -- return -1 on
+ error, 0 otherwise. Note that the eof flag is set when the end of the input
+ file is reached, even though there may be unused data in the buffer. Once
+ that data has been used, no more attempts will be made to read the file.
+ gz_avail() assumes that strm->avail_in == 0. */
+local int gz_avail(state)
+ gz_statep state;
+{
+ z_streamp strm = &(state->strm);
+
+ if (state->err != Z_OK)
+ return -1;
+ if (state->eof == 0) {
+ if (gz_load(state, state->in, state->size, &(strm->avail_in)) == -1)
+ return -1;
+ strm->next_in = state->in;
+ }
+ return 0;
+}
+
+/* Get next byte from input, or -1 if end or error. */
+#define NEXT() ((strm->avail_in == 0 && gz_avail(state) == -1) ? -1 : \
+ (strm->avail_in == 0 ? -1 : \
+ (strm->avail_in--, *(strm->next_in)++)))
+
+/* Get a four-byte little-endian integer and return 0 on success and the value
+ in *ret. Otherwise -1 is returned and *ret is not modified. */
+local int gz_next4(state, ret)
+ gz_statep state;
+ unsigned long *ret;
+{
+ int ch;
+ unsigned long val;
+ z_streamp strm = &(state->strm);
+
+ val = NEXT();
+ val += (unsigned)NEXT() << 8;
+ val += (unsigned long)NEXT() << 16;
+ ch = NEXT();
+ if (ch == -1)
+ return -1;
+ val += (unsigned long)ch << 24;
+ *ret = val;
+ return 0;
+}
+
+/* Look for gzip header, set up for inflate or copy. state->have must be zero.
+ If this is the first time in, allocate required memory. state->how will be
+ left unchanged if there is no more input data available, will be set to COPY
+ if there is no gzip header and direct copying will be performed, or it will
+ be set to GZIP for decompression, and the gzip header will be skipped so
+ that the next available input data is the raw deflate stream. If direct
+ copying, then leftover input data from the input buffer will be copied to
+ the output buffer. In that case, all further file reads will be directly to
+ either the output buffer or a user buffer. If decompressing, the inflate
+ state and the check value will be initialized. gz_head() will return 0 on
+ success or -1 on failure. Failures may include read errors or gzip header
+ errors. */
+local int gz_head(state)
+ gz_statep state;
+{
+ z_streamp strm = &(state->strm);
+ int flags;
+ unsigned len;
+
+ /* allocate read buffers and inflate memory */
+ if (state->size == 0) {
+ /* allocate buffers */
+ state->in = malloc(state->want);
+ state->out = malloc(state->want << 1);
+ if (state->in == NULL || state->out == NULL) {
+ if (state->out != NULL)
+ free(state->out);
+ if (state->in != NULL)
+ free(state->in);
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+ state->size = state->want;
+
+ /* allocate inflate memory */
+ state->strm.zalloc = Z_NULL;
+ state->strm.zfree = Z_NULL;
+ state->strm.opaque = Z_NULL;
+ state->strm.avail_in = 0;
+ state->strm.next_in = Z_NULL;
+ if (inflateInit2(&(state->strm), -15) != Z_OK) { /* raw inflate */
+ free(state->out);
+ free(state->in);
+ state->size = 0;
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+ }
+
+ /* get some data in the input buffer */
+ if (strm->avail_in == 0) {
+ if (gz_avail(state) == -1)
+ return -1;
+ if (strm->avail_in == 0)
+ return 0;
+ }
+
+ /* look for the gzip magic header bytes 31 and 139 */
+ if (strm->next_in[0] == 31) {
+ strm->avail_in--;
+ strm->next_in++;
+ if (strm->avail_in == 0 && gz_avail(state) == -1)
+ return -1;
+ if (strm->avail_in && strm->next_in[0] == 139) {
+ /* we have a gzip header, woo hoo! */
+ strm->avail_in--;
+ strm->next_in++;
+
+ /* skip rest of header */
+ if (NEXT() != 8) { /* compression method */
+ gz_error(state, Z_DATA_ERROR, "unknown compression method");
+ return -1;
+ }
+ flags = NEXT();
+ if (flags & 0xe0) { /* reserved flag bits */
+ gz_error(state, Z_DATA_ERROR, "unknown header flags set");
+ return -1;
+ }
+ NEXT(); /* modification time */
+ NEXT();
+ NEXT();
+ NEXT();
+ NEXT(); /* extra flags */
+ NEXT(); /* operating system */
+ if (flags & 4) { /* extra field */
+ len = (unsigned)NEXT();
+ len += (unsigned)NEXT() << 8;
+ while (len--)
+ if (NEXT() < 0)
+ break;
+ }
+ if (flags & 8) /* file name */
+ while (NEXT() > 0)
+ ;
+ if (flags & 16) /* comment */
+ while (NEXT() > 0)
+ ;
+ if (flags & 2) { /* header crc */
+ NEXT();
+ NEXT();
+ }
+ /* an unexpected end of file is not checked for here -- it will be
+ noticed on the first request for uncompressed data */
+
+ /* set up for decompression */
+ inflateReset(strm);
+ strm->adler = crc32(0L, Z_NULL, 0);
+ state->how = GZIP;
+ state->direct = 0;
+ return 0;
+ }
+ else {
+ /* not a gzip file -- save first byte (31) and fall to raw i/o */
+ state->out[0] = 31;
+ state->have = 1;
+ }
+ }
+
+ /* doing raw i/o, save start of raw data for seeking, copy any leftover
+ input to output -- this assumes that the output buffer is larger than
+ the input buffer, which also assures space for gzungetc() */
+ state->raw = state->pos;
+ state->next = state->out;
+ if (strm->avail_in) {
+ memcpy(state->next + state->have, strm->next_in, strm->avail_in);
+ state->have += strm->avail_in;
+ strm->avail_in = 0;
+ }
+ state->how = COPY;
+ state->direct = 1;
+ return 0;
+}
+
+/* Decompress from input to the provided next_out and avail_out in the state.
+ If the end of the compressed data is reached, then verify the gzip trailer
+ check value and length (modulo 2^32). state->have and state->next are set
+ to point to the just decompressed data, and the crc is updated. If the
+ trailer is verified, state->how is reset to LOOK to look for the next gzip
+ stream or raw data, once state->have is depleted. Returns 0 on success, -1
+ on failure. Failures may include invalid compressed data or a failed gzip
+ trailer verification. */
+local int gz_decomp(state)
+ gz_statep state;
+{
+ int ret;
+ unsigned had;
+ unsigned long crc, len;
+ z_streamp strm = &(state->strm);
+
+ /* fill output buffer up to end of deflate stream */
+ had = strm->avail_out;
+ do {
+ /* get more input for inflate() */
+ if (strm->avail_in == 0 && gz_avail(state) == -1)
+ return -1;
+ if (strm->avail_in == 0) {
+ gz_error(state, Z_DATA_ERROR, "unexpected end of file");
+ return -1;
+ }
+
+ /* decompress and handle errors */
+ ret = inflate(strm, Z_NO_FLUSH);
+ if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) {
+ gz_error(state, Z_STREAM_ERROR,
+ "internal error: inflate stream corrupt");
+ return -1;
+ }
+ if (ret == Z_MEM_ERROR) {
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+ if (ret == Z_DATA_ERROR) { /* deflate stream invalid */
+ gz_error(state, Z_DATA_ERROR,
+ strm->msg == NULL ? "compressed data error" : strm->msg);
+ return -1;
+ }
+ } while (strm->avail_out && ret != Z_STREAM_END);
+
+ /* update available output and crc check value */
+ state->have = had - strm->avail_out;
+ state->next = strm->next_out - state->have;
+ strm->adler = crc32(strm->adler, state->next, state->have);
+
+ /* check gzip trailer if at end of deflate stream */
+ if (ret == Z_STREAM_END) {
+ if (gz_next4(state, &crc) == -1 || gz_next4(state, &len) == -1) {
+ gz_error(state, Z_DATA_ERROR, "unexpected end of file");
+ return -1;
+ }
+ if (crc != strm->adler) {
+ gz_error(state, Z_DATA_ERROR, "incorrect data check");
+ return -1;
+ }
+ if (len != (strm->total_out & 0xffffffffL)) {
+ gz_error(state, Z_DATA_ERROR, "incorrect length check");
+ return -1;
+ }
+ state->how = LOOK; /* ready for next stream, once have is 0 (leave
+ state->direct unchanged to remember how) */
+ }
+
+ /* good decompression */
+ return 0;
+}
+
+/* Make data and put in the output buffer. Assumes that state->have == 0.
+ Data is either copied from the input file or decompressed from the input
+ file depending on state->how. If state->how is LOOK, then a gzip header is
+ looked for (and skipped if found) to determine wither to copy or decompress.
+ Returns -1 on error, otherwise 0. gz_make() will leave state->have as COPY
+ or GZIP unless the end of the input file has been reached and all data has
+ been processed. */
+local int gz_make(state)
+ gz_statep state;
+{
+ z_streamp strm = &(state->strm);
+
+ if (state->how == LOOK) { /* look for gzip header */
+ if (gz_head(state) == -1)
+ return -1;
+ if (state->have) /* got some data from gz_head() */
+ return 0;
+ }
+ if (state->how == COPY) { /* straight copy */
+ if (gz_load(state, state->out, state->size << 1, &(state->have)) == -1)
+ return -1;
+ state->next = state->out;
+ }
+ else if (state->how == GZIP) { /* decompress */
+ strm->avail_out = state->size << 1;
+ strm->next_out = state->out;
+ if (gz_decomp(state) == -1)
+ return -1;
+ }
+ return 0;
+}
+
+/* Skip len uncompressed bytes of output. Return -1 on error, 0 on success. */
+local int gz_skip(state, len)
+ gz_statep state;
+ z_off64_t len;
+{
+ unsigned n;
+
+ /* skip over len bytes or reach end-of-file, whichever comes first */
+ while (len)
+ /* skip over whatever is in output buffer */
+ if (state->have) {
+ n = GT_OFF(state->have) || (z_off64_t)state->have > len ?
+ (unsigned)len : state->have;
+ state->have -= n;
+ state->next += n;
+ state->pos += n;
+ len -= n;
+ }
+
+ /* output buffer empty -- return if we're at the end of the input */
+ else if (state->eof && state->strm.avail_in == 0)
+ break;
+
+ /* need more data to skip -- load up output buffer */
+ else {
+ /* get more output, looking for header if required */
+ if (gz_make(state) == -1)
+ return -1;
+ }
+ return 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzread(file, buf, len)
+ gzFile file;
+ voidp buf;
+ unsigned len;
+{
+ unsigned got, n;
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're reading and that there's no error */
+ if (state->mode != GZ_READ || state->err != Z_OK)
+ return -1;
+
+ /* since an int is returned, make sure len fits in one, otherwise return
+ with an error (this avoids the flaw in the interface) */
+ if ((int)len < 0) {
+ gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
+ return -1;
+ }
+
+ /* if len is zero, avoid unnecessary operations */
+ if (len == 0)
+ return 0;
+
+ /* process a skip request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_skip(state, state->skip) == -1)
+ return -1;
+ }
+
+ /* get len bytes to buf, or less than len if at the end */
+ got = 0;
+ do {
+ /* first just try copying data from the output buffer */
+ if (state->have) {
+ n = state->have > len ? len : state->have;
+ memcpy(buf, state->next, n);
+ state->next += n;
+ state->have -= n;
+ }
+
+ /* output buffer empty -- return if we're at the end of the input */
+ else if (state->eof && strm->avail_in == 0)
+ break;
+
+ /* need output data -- for small len or new stream load up our output
+ buffer */
+ else if (state->how == LOOK || len < (state->size << 1)) {
+ /* get more output, looking for header if required */
+ if (gz_make(state) == -1)
+ return -1;
+ continue; /* no progress yet -- go back to memcpy() above */
+ /* the copy above assures that we will leave with space in the
+ output buffer, allowing at least one gzungetc() to succeed */
+ }
+
+ /* large len -- read directly into user buffer */
+ else if (state->how == COPY) { /* read directly */
+ if (gz_load(state, buf, len, &n) == -1)
+ return -1;
+ }
+
+ /* large len -- decompress directly into user buffer */
+ else { /* state->how == GZIP */
+ strm->avail_out = len;
+ strm->next_out = buf;
+ if (gz_decomp(state) == -1)
+ return -1;
+ n = state->have;
+ state->have = 0;
+ }
+
+ /* update progress */
+ len -= n;
+ buf = (char *)buf + n;
+ got += n;
+ state->pos += n;
+ } while (len);
+
+ /* return number of bytes read into user buffer (will fit in int) */
+ return (int)got;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzgetc(file)
+ gzFile file;
+{
+ int ret;
+ unsigned char buf[1];
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+
+ /* check that we're reading and that there's no error */
+ if (state->mode != GZ_READ || state->err != Z_OK)
+ return -1;
+
+ /* try output buffer (no need to check for skip request) */
+ if (state->have) {
+ state->have--;
+ state->pos++;
+ return *(state->next)++;
+ }
+
+ /* nothing there -- try gzread() */
+ ret = gzread(file, buf, 1);
+ return ret < 1 ? -1 : buf[0];
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzungetc(c, file)
+ int c;
+ gzFile file;
+{
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+
+ /* check that we're reading and that there's no error */
+ if (state->mode != GZ_READ || state->err != Z_OK)
+ return -1;
+
+ /* process a skip request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_skip(state, state->skip) == -1)
+ return -1;
+ }
+
+ /* can't push EOF */
+ if (c < 0)
+ return -1;
+
+ /* if output buffer empty, put byte at end (allows more pushing) */
+ if (state->have == 0) {
+ state->have = 1;
+ state->next = state->out + (state->size << 1) - 1;
+ state->next[0] = c;
+ state->pos--;
+ return c;
+ }
+
+ /* if no room, give up (must have already done a gzungetc()) */
+ if (state->have == (state->size << 1)) {
+ gz_error(state, Z_BUF_ERROR, "out of room to push characters");
+ return -1;
+ }
+
+ /* slide output data if needed and insert byte before existing data */
+ if (state->next == state->out) {
+ unsigned char *src = state->out + state->have;
+ unsigned char *dest = state->out + (state->size << 1);
+ while (src > state->out)
+ *--dest = *--src;
+ state->next = dest;
+ }
+ state->have++;
+ state->next--;
+ state->next[0] = c;
+ state->pos--;
+ return c;
+}
+
+/* -- see zlib.h -- */
+char * ZEXPORT gzgets(file, buf, len)
+ gzFile file;
+ char *buf;
+ int len;
+{
+ unsigned left, n;
+ char *str;
+ unsigned char *eol;
+ gz_statep state;
+
+ /* check parameters and get internal structure */
+ if (file == NULL || buf == NULL || len < 1)
+ return NULL;
+ state = (gz_statep)file;
+
+ /* check that we're reading and that there's no error */
+ if (state->mode != GZ_READ || state->err != Z_OK)
+ return NULL;
+
+ /* process a skip request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_skip(state, state->skip) == -1)
+ return NULL;
+ }
+
+ /* copy output bytes up to new line or len - 1, whichever comes first --
+ append a terminating zero to the string (we don't check for a zero in
+ the contents, let the user worry about that) */
+ str = buf;
+ left = (unsigned)len - 1;
+ if (left) do {
+ /* assure that something is in the output buffer */
+ if (state->have == 0) {
+ if (gz_make(state) == -1)
+ return NULL; /* error */
+ if (state->have == 0) { /* end of file */
+ if (buf == str) /* got bupkus */
+ return NULL;
+ break; /* got something -- return it */
+ }
+ }
+
+ /* look for end-of-line in current output buffer */
+ n = state->have > left ? left : state->have;
+ eol = memchr(state->next, '\n', n);
+ if (eol != NULL)
+ n = (unsigned)(eol - state->next) + 1;
+
+ /* copy through end-of-line, or remainder if not found */
+ memcpy(buf, state->next, n);
+ state->have -= n;
+ state->next += n;
+ state->pos += n;
+ left -= n;
+ buf += n;
+ } while (left && eol == NULL);
+
+ /* found end-of-line or out of space -- terminate string and return it */
+ buf[0] = 0;
+ return str;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzdirect(file)
+ gzFile file;
+{
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return 0;
+ state = (gz_statep)file;
+
+ /* check that we're reading */
+ if (state->mode != GZ_READ)
+ return 0;
+
+ /* if the state is not known, but we can find out, then do so (this is
+ mainly for right after a gzopen() or gzdopen()) */
+ if (state->how == LOOK && state->have == 0)
+ (void)gz_head(state);
+
+ /* return 1 if reading direct, 0 if decompressing a gzip stream */
+ return state->direct;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzclose_r(file)
+ gzFile file;
+{
+ int ret;
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return Z_STREAM_ERROR;
+ state = (gz_statep)file;
+
+ /* check that we're reading */
+ if (state->mode != GZ_READ)
+ return Z_STREAM_ERROR;
+
+ /* free memory and close file */
+ if (state->size) {
+ inflateEnd(&(state->strm));
+ free(state->out);
+ free(state->in);
+ }
+ gz_error(state, Z_OK, NULL);
+ free(state->path);
+ ret = close(state->fd);
+ free(state);
+ return ret ? Z_ERRNO : Z_OK;
+}
diff --git a/cpukit/zlib/gzwrite.c b/cpukit/zlib/gzwrite.c
new file mode 100644
index 0000000000..e8defc6887
--- /dev/null
+++ b/cpukit/zlib/gzwrite.c
@@ -0,0 +1,531 @@
+/* gzwrite.c -- zlib functions for writing gzip files
+ * Copyright (C) 2004, 2005, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* Local functions */
+local int gz_init OF((gz_statep));
+local int gz_comp OF((gz_statep, int));
+local int gz_zero OF((gz_statep, z_off64_t));
+
+/* Initialize state for writing a gzip file. Mark initialization by setting
+ state->size to non-zero. Return -1 on failure or 0 on success. */
+local int gz_init(state)
+ gz_statep state;
+{
+ int ret;
+ z_streamp strm = &(state->strm);
+
+ /* allocate input and output buffers */
+ state->in = malloc(state->want);
+ state->out = malloc(state->want);
+ if (state->in == NULL || state->out == NULL) {
+ if (state->out != NULL)
+ free(state->out);
+ if (state->in != NULL)
+ free(state->in);
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+
+ /* allocate deflate memory, set up for gzip compression */
+ strm->zalloc = Z_NULL;
+ strm->zfree = Z_NULL;
+ strm->opaque = Z_NULL;
+ ret = deflateInit2(strm, state->level, Z_DEFLATED,
+ 15 + 16, 8, state->strategy);
+ if (ret != Z_OK) {
+ free(state->in);
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+
+ /* mark state as initialized */
+ state->size = state->want;
+
+ /* initialize write buffer */
+ strm->avail_out = state->size;
+ strm->next_out = state->out;
+ state->next = strm->next_out;
+ return 0;
+}
+
+/* Compress whatever is at avail_in and next_in and write to the output file.
+ Return -1 if there is an error writing to the output file, otherwise 0.
+ flush is assumed to be a valid deflate() flush value. If flush is Z_FINISH,
+ then the deflate() state is reset to start a new gzip stream. */
+local int gz_comp(state, flush)
+ gz_statep state;
+ int flush;
+{
+ int ret, got;
+ unsigned have;
+ z_streamp strm = &(state->strm);
+
+ /* allocate memory if this is the first time through */
+ if (state->size == 0 && gz_init(state) == -1)
+ return -1;
+
+ /* run deflate() on provided input until it produces no more output */
+ ret = Z_OK;
+ do {
+ /* write out current buffer contents if full, or if flushing, but if
+ doing Z_FINISH then don't write until we get to Z_STREAM_END */
+ if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
+ (flush != Z_FINISH || ret == Z_STREAM_END))) {
+ have = (unsigned)(strm->next_out - state->next);
+ if (have && ((got = write(state->fd, state->next, have)) < 0 ||
+ (unsigned)got != have)) {
+ gz_error(state, Z_ERRNO, zstrerror());
+ return -1;
+ }
+ if (strm->avail_out == 0) {
+ strm->avail_out = state->size;
+ strm->next_out = state->out;
+ }
+ state->next = strm->next_out;
+ }
+
+ /* compress */
+ have = strm->avail_out;
+ ret = deflate(strm, flush);
+ if (ret == Z_STREAM_ERROR) {
+ gz_error(state, Z_STREAM_ERROR,
+ "internal error: deflate stream corrupt");
+ return -1;
+ }
+ have -= strm->avail_out;
+ } while (have);
+
+ /* if that completed a deflate stream, allow another to start */
+ if (flush == Z_FINISH)
+ deflateReset(strm);
+
+ /* all done, no errors */
+ return 0;
+}
+
+/* Compress len zeros to output. Return -1 on error, 0 on success. */
+local int gz_zero(state, len)
+ gz_statep state;
+ z_off64_t len;
+{
+ int first;
+ unsigned n;
+ z_streamp strm = &(state->strm);
+
+ /* consume whatever's left in the input buffer */
+ if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+ return -1;
+
+ /* compress len zeros (len guaranteed > 0) */
+ first = 1;
+ while (len) {
+ n = GT_OFF(state->size) || (z_off64_t)state->size > len ?
+ (unsigned)len : state->size;
+ if (first) {
+ memset(state->in, 0, n);
+ first = 0;
+ }
+ strm->avail_in = n;
+ strm->next_in = state->in;
+ state->pos += n;
+ if (gz_comp(state, Z_NO_FLUSH) == -1)
+ return -1;
+ len -= n;
+ }
+ return 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzwrite(file, buf, len)
+ gzFile file;
+ voidpc buf;
+ unsigned len;
+{
+ unsigned put = len;
+ unsigned n;
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return 0;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return 0;
+
+ /* since an int is returned, make sure len fits in one, otherwise return
+ with an error (this avoids the flaw in the interface) */
+ if ((int)len < 0) {
+ gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
+ return 0;
+ }
+
+ /* if len is zero, avoid unnecessary operations */
+ if (len == 0)
+ return 0;
+
+ /* allocate memory if this is the first time through */
+ if (state->size == 0 && gz_init(state) == -1)
+ return 0;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_zero(state, state->skip) == -1)
+ return 0;
+ }
+
+ /* for small len, copy to input buffer, otherwise compress directly */
+ if (len < state->size) {
+ /* copy to input buffer, compress when full */
+ do {
+ if (strm->avail_in == 0)
+ strm->next_in = state->in;
+ n = state->size - strm->avail_in;
+ if (n > len)
+ n = len;
+ memcpy(strm->next_in + strm->avail_in, buf, n);
+ strm->avail_in += n;
+ state->pos += n;
+ buf = (char *)buf + n;
+ len -= n;
+ if (len && gz_comp(state, Z_NO_FLUSH) == -1)
+ return 0;
+ } while (len);
+ }
+ else {
+ /* consume whatever's left in the input buffer */
+ if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+ return 0;
+
+ /* directly compress user buffer to file */
+ strm->avail_in = len;
+ strm->next_in = (voidp)buf;
+ state->pos += len;
+ if (gz_comp(state, Z_NO_FLUSH) == -1)
+ return 0;
+ }
+
+ /* input was all buffered or compressed (put will fit in int) */
+ return (int)put;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzputc(file, c)
+ gzFile file;
+ int c;
+{
+ unsigned char buf[1];
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return -1;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_zero(state, state->skip) == -1)
+ return -1;
+ }
+
+ /* try writing to input buffer for speed (state->size == 0 if buffer not
+ initialized) */
+ if (strm->avail_in < state->size) {
+ if (strm->avail_in == 0)
+ strm->next_in = state->in;
+ strm->next_in[strm->avail_in++] = c;
+ state->pos++;
+ return c;
+ }
+
+ /* no room in buffer or not initialized, use gz_write() */
+ buf[0] = c;
+ if (gzwrite(file, buf, 1) != 1)
+ return -1;
+ return c;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzputs(file, str)
+ gzFile file;
+ const char *str;
+{
+ int ret;
+ unsigned len;
+
+ /* write string */
+ len = (unsigned)strlen(str);
+ ret = gzwrite(file, str, len);
+ return ret == 0 && len != 0 ? -1 : ret;
+}
+
+#ifdef STDC
+#include <stdarg.h>
+
+/* -- see zlib.h -- */
+int ZEXPORTVA gzprintf (gzFile file, const char *format, ...)
+{
+ int size, len;
+ gz_statep state;
+ z_streamp strm;
+ va_list va;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return 0;
+
+ /* make sure we have some buffer space */
+ if (state->size == 0 && gz_init(state) == -1)
+ return 0;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_zero(state, state->skip) == -1)
+ return 0;
+ }
+
+ /* consume whatever's left in the input buffer */
+ if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+ return 0;
+
+ /* do the printf() into the input buffer, put length in len */
+ size = (int)(state->size);
+ state->in[size - 1] = 0;
+ va_start(va, format);
+#ifdef NO_vsnprintf
+# ifdef HAS_vsprintf_void
+ (void)vsprintf(state->in, format, va);
+ va_end(va);
+ for (len = 0; len < size; len++)
+ if (state->in[len] == 0) break;
+# else
+ len = vsprintf(state->in, format, va);
+ va_end(va);
+# endif
+#else
+# ifdef HAS_vsnprintf_void
+ (void)vsnprintf(state->in, size, format, va);
+ va_end(va);
+ len = strlen(state->in);
+# else
+ len = vsnprintf((char *)(state->in), size, format, va);
+ va_end(va);
+# endif
+#endif
+
+ /* check that printf() results fit in buffer */
+ if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
+ return 0;
+
+ /* update buffer and position, defer compression until needed */
+ strm->avail_in = (unsigned)len;
+ strm->next_in = state->in;
+ state->pos += len;
+ return len;
+}
+
+#else /* !STDC */
+
+/* -- see zlib.h -- */
+int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+ a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
+ gzFile file;
+ const char *format;
+ int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+ a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
+{
+ int size, len;
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return 0;
+
+ /* make sure we have some buffer space */
+ if (state->size == 0 && gz_init(state) == -1)
+ return 0;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_zero(state, state->skip) == -1)
+ return 0;
+ }
+
+ /* consume whatever's left in the input buffer */
+ if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+ return 0;
+
+ /* do the printf() into the input buffer, put length in len */
+ size = (int)(state->size);
+ state->in[size - 1] = 0;
+#ifdef NO_snprintf
+# ifdef HAS_sprintf_void
+ sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+ for (len = 0; len < size; len++)
+ if (state->in[len] == 0) break;
+# else
+ len = sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+# endif
+#else
+# ifdef HAS_snprintf_void
+ snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+ len = strlen(state->in);
+# else
+ len = snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+# endif
+#endif
+
+ /* check that printf() results fit in buffer */
+ if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
+ return 0;
+
+ /* update buffer and position, defer compression until needed */
+ strm->avail_in = (unsigned)len;
+ strm->next_in = state->in;
+ state->pos += len;
+ return len;
+}
+
+#endif
+
+/* -- see zlib.h -- */
+int ZEXPORT gzflush(file, flush)
+ gzFile file;
+ int flush;
+{
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return Z_STREAM_ERROR;
+
+ /* check flush parameter */
+ if (flush < 0 || flush > Z_FINISH)
+ return Z_STREAM_ERROR;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_zero(state, state->skip) == -1)
+ return -1;
+ }
+
+ /* compress remaining data with requested flush */
+ gz_comp(state, flush);
+ return state->err;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzsetparams(file, level, strategy)
+ gzFile file;
+ int level;
+ int strategy;
+{
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return Z_STREAM_ERROR;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return Z_STREAM_ERROR;
+
+ /* if no change is requested, then do nothing */
+ if (level == state->level && strategy == state->strategy)
+ return Z_OK;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_zero(state, state->skip) == -1)
+ return -1;
+ }
+
+ /* change compression parameters for subsequent input */
+ if (state->size) {
+ /* flush previous input with previous parameters before changing */
+ if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
+ return state->err;
+ deflateParams(strm, level, strategy);
+ }
+ state->level = level;
+ state->strategy = strategy;
+ return Z_OK;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzclose_w(file)
+ gzFile file;
+{
+ int ret = 0;
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return Z_STREAM_ERROR;
+ state = (gz_statep)file;
+
+ /* check that we're writing */
+ if (state->mode != GZ_WRITE)
+ return Z_STREAM_ERROR;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ ret += gz_zero(state, state->skip);
+ }
+
+ /* flush, free memory, and close file */
+ ret += gz_comp(state, Z_FINISH);
+ (void)deflateEnd(&(state->strm));
+ free(state->out);
+ free(state->in);
+ gz_error(state, Z_OK, NULL);
+ free(state->path);
+ ret += close(state->fd);
+ free(state);
+ return ret ? Z_ERRNO : Z_OK;
+}