summaryrefslogtreecommitdiffstats
path: root/cpukit/score/cpu/sparc/rtems/asm.h
diff options
context:
space:
mode:
authorChris Johns <chrisj@rtems.org>2017-12-23 18:18:56 +1100
committerSebastian Huber <sebastian.huber@embedded-brains.de>2018-01-25 08:45:26 +0100
commit2afb22b7e1ebcbe40373ff7e0efae7d207c655a9 (patch)
tree44759efe9374f13200a97e96d91bd9a2b7e5ce2a /cpukit/score/cpu/sparc/rtems/asm.h
parentMAINTAINERS: Add myself to Write After Approval. (diff)
downloadrtems-2afb22b7e1ebcbe40373ff7e0efae7d207c655a9.tar.bz2
Remove make preinstall
A speciality of the RTEMS build system was the make preinstall step. It copied header files from arbitrary locations into the build tree. The header files were included via the -Bsome/build/tree/path GCC command line option. This has at least seven problems: * The make preinstall step itself needs time and disk space. * Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error. * There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult. * The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit. * An introduction of a new build system is difficult. * Include paths specified by the -B option are system headers. This may suppress warnings. * The parallel build had sporadic failures on some hosts. This patch removes the make preinstall step. All installed header files are moved to dedicated include directories in the source tree. Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc, etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g. erc32, imx, qoriq, etc. The new cpukit include directories are: * cpukit/include * cpukit/score/cpu/@RTEMS_CPU@/include * cpukit/libnetworking The new BSP include directories are: * bsps/include * bsps/@RTEMS_CPU@/include * bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include There are build tree include directories for generated files. The include directory order favours the most general header file, e.g. it is not possible to override general header files via the include path order. The "bootstrap -p" option was removed. The new "bootstrap -H" option should be used to regenerate the "headers.am" files. Update #3254.
Diffstat (limited to 'cpukit/score/cpu/sparc/rtems/asm.h')
-rw-r--r--cpukit/score/cpu/sparc/rtems/asm.h120
1 files changed, 0 insertions, 120 deletions
diff --git a/cpukit/score/cpu/sparc/rtems/asm.h b/cpukit/score/cpu/sparc/rtems/asm.h
deleted file mode 100644
index a2b11f63fc..0000000000
--- a/cpukit/score/cpu/sparc/rtems/asm.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/**
- * @file
- *
- * @brief Address the Problems Caused by Incompatible Flavor of
- * Assemblers and Toolsets
- *
- * This include file attempts to address the problems
- * caused by incompatible flavors of assemblers and
- * toolsets. It primarily addresses variations in the
- * use of leading underscores on symbols and the requirement
- * that register names be preceded by a %.
- *
- * NOTE: The spacing in the use of these macros
- * is critical to them working as advertised.
- */
-
-/*
- * COPYRIGHT:
- *
- * This file is based on similar code found in newlib available
- * from ftp.cygnus.com. The file which was used had no copyright
- * notice. This file is freely distributable as long as the source
- * of the file is noted.
- */
-
-#ifndef _RTEMS_ASM_H
-#define _RTEMS_ASM_H
-
-/*
- * Indicate we are in an assembly file and get the basic CPU definitions.
- */
-
-#ifndef ASM
-#define ASM
-#endif
-
-#include <rtems/score/cpuopts.h>
-#include <rtems/score/cpu.h>
-
-/*
- * Recent versions of GNU cpp define variables which indicate the
- * need for underscores and percents. If not using GNU cpp or
- * the version does not support this, then you will obviously
- * have to define these as appropriate.
- */
-
-/* XXX __USER_LABEL_PREFIX__ and __REGISTER_PREFIX__ do not work on gcc 2.7.0 */
-/* XXX The following ifdef magic fixes the problem but results in a warning */
-/* XXX when compiling assembly code. */
-
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-#ifndef __REGISTER_PREFIX__
-#define __REGISTER_PREFIX__
-#endif
-
-#include <rtems/concat.h>
-
-/* Use the right prefix for global labels. */
-
-#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)
-
-/* Use the right prefix for registers. */
-
-#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x)
-
-/*
- * define macros for all of the registers on this CPU
- *
- * EXAMPLE: #define d0 REG (d0)
- */
-
-/*
- * Define macros to handle section beginning and ends.
- */
-
-
-#define BEGIN_CODE_DCL .text
-#define END_CODE_DCL
-#define BEGIN_DATA_DCL .data
-#define END_DATA_DCL
-#define BEGIN_CODE .text
-#define END_CODE
-#define BEGIN_DATA
-#define END_DATA
-#define BEGIN_BSS
-#define END_BSS
-#define END
-
-/*
- * Following must be tailor for a particular flavor of the C compiler.
- * They may need to put underscores in front of the symbols.
- */
-
-#define PUBLIC(sym) .globl SYM (sym)
-#define EXTERN(sym) .globl SYM (sym)
-
-/*
- * Entry for traps which jump to a programmer-specified trap handler.
- */
-
-#define TRAP(_vector, _handler) \
- mov %psr, %l0 ; \
- sethi %hi(_handler), %l4 ; \
- jmp %l4+%lo(_handler); \
- mov _vector, %l3
-
-/*
- * Used for the reset trap to avoid a supervisor instruction
- */
-
-#define RTRAP(_vector, _handler) \
- mov %g0, %l0 ; \
- sethi %hi(_handler), %l4 ; \
- jmp %l4+%lo(_handler); \
- mov _vector, %l3
-
-#endif