Patches from Eric Norum

1 files changed, 120 insertions, 147 deletions

diff --git a/configure b/configure
index a97caec424..24ed28da49 100644
--- a/configure
+++ b/configure
@@ -21,9 +21,6 @@ ac_help="$ac_help
   --enable-posix 	     	    enable posix interface"
 ac_help="$ac_help
 \
-  --enable-ka9q                enable KA9Q TCP/IP stack"
-ac_help="$ac_help
-\
   --enable-networking                enable TCP/IP stack"
 ac_help="$ac_help
 \
@@ -561,7 +558,7 @@ fi
 
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:565: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:562: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -634,7 +631,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:638: checking host system type" >&5
+echo "configure:635: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -655,7 +652,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:659: checking target system type" >&5
+echo "configure:656: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -673,7 +670,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:677: checking build system type" >&5
+echo "configure:674: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -731,20 +728,6 @@ else
 fi
 
 
-# Check whether --enable-ka9q or --disable-ka9q was given.
-if test "${enable_ka9q+set}" = set; then
-  enableval="$enable_ka9q"
-  \
-case "${enableval}" in
-  yes) RTEMS_HAS_KA9Q=yes ;;
-  no) RTEMS_HAS_KA9Q=no ;;
-  *)  { echo "configure: error: bad value ${enableval} for enable-ka9q option" 1>&2; exit 1; } ;;
-esac
-else
-  RTEMS_HAS_KA9Q=no
-fi
-
-
 # Check whether --enable-networking or --disable-networking was given.
 if test "${enable_networking+set}" = set; then
   enableval="$enable_networking"
@@ -840,7 +823,7 @@ RTEMS_PREFIX=${target_cpu}-${target_vendor}
 # Extract the first word of "cat", so it can be a program name with args.
 set dummy cat; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:844: checking for $ac_word" >&5
+echo "configure:827: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CAT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -871,7 +854,7 @@ fi
 # Extract the first word of "rm", so it can be a program name with args.
 set dummy rm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:875: checking for $ac_word" >&5
+echo "configure:858: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_RM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -902,7 +885,7 @@ fi
 # Extract the first word of "cp", so it can be a program name with args.
 set dummy cp; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:906: checking for $ac_word" >&5
+echo "configure:889: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -933,7 +916,7 @@ fi
 # Extract the first word of "mv", so it can be a program name with args.
 set dummy mv; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:937: checking for $ac_word" >&5
+echo "configure:920: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MV'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -964,7 +947,7 @@ fi
 # Extract the first word of "ln", so it can be a program name with args.
 set dummy ln; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:968: checking for $ac_word" >&5
+echo "configure:951: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LN'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -993,7 +976,7 @@ else
 fi
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:997: checking whether ln -s works" >&5
+echo "configure:980: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1016,7 +999,7 @@ fi
 # Extract the first word of "chmod", so it can be a program name with args.
 set dummy chmod; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1020: checking for $ac_word" >&5
+echo "configure:1003: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CHMOD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1047,7 +1030,7 @@ fi
 # Extract the first word of "sort", so it can be a program name with args.
 set dummy sort; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1051: checking for $ac_word" >&5
+echo "configure:1034: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_SORT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1086,7 +1069,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1090: checking for a BSD compatible install" >&5
+echo "configure:1073: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1139,7 +1122,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 # Extract the first word of "mkdir", so it can be a program name with args.
 set dummy mkdir; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1143: checking for $ac_word" >&5
+echo "configure:1126: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MKDIR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1171,7 +1154,7 @@ fi
 
 
 echo $ac_n "checking for working $MKDIR -m 0755""... $ac_c" 1>&6
-echo "configure:1175: checking for working $MKDIR -m 0755" >&5
+echo "configure:1158: checking for working $MKDIR -m 0755" >&5
 if eval "test \"`echo '$''{'rtems_cv_prog_MKDIR_P'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1188,7 +1171,7 @@ echo "$ac_t""$rtems_cv_prog_MKDIR_M" 1>&6
 
 
 echo $ac_n "checking for working $MKDIR -p""... $ac_c" 1>&6
-echo "configure:1192: checking for working $MKDIR -p" >&5
+echo "configure:1175: checking for working $MKDIR -p" >&5
 if eval "test \"`echo '$''{'rtems_cv_prog_mkdir_p'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1208,7 +1191,7 @@ test "$rtems_cv_prog_MKDIR_P" = "yes" && MKDIR="$MKDIR -p"
 # Extract the first word of "touch", so it can be a program name with args.
 set dummy touch; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1212: checking for $ac_word" >&5
+echo "configure:1195: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_TOUCH'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1239,7 +1222,7 @@ fi
 # Extract the first word of "cmp", so it can be a program name with args.
 set dummy cmp; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1243: checking for $ac_word" >&5
+echo "configure:1226: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1271,7 +1254,7 @@ fi
 # Extract the first word of "sed", so it can be a program name with args.
 set dummy sed; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1275: checking for $ac_word" >&5
+echo "configure:1258: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_SED'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1304,7 +1287,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1308: checking for $ac_word" >&5
+echo "configure:1291: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_M4'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1341,7 +1324,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1345: checking for $ac_word" >&5
+echo "configure:1328: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_KSH'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1419,7 +1402,7 @@ case "${target}" in
 	;;
   *) 
 	echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6
-echo "configure:1423: checking rtems target cpu" >&5
+echo "configure:1406: checking rtems target cpu" >&5
 target_cpu=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'`
 echo "$ac_t""$target_cpu" 1>&6
 
@@ -1438,7 +1421,7 @@ fi
 
 # Is this a supported CPU?
 echo $ac_n "checking if cpu $target_cpu is supported""... $ac_c" 1>&6
-echo "configure:1442: checking if cpu $target_cpu is supported" >&5
+echo "configure:1425: checking if cpu $target_cpu is supported" >&5
 if test -d "$srcdir/c/src/exec/score/cpu/$target_cpu"; then
   echo "$ac_t""yes" 1>&6
   makefiles="$makefiles c/src/exec/score/cpu/$target_cpu/Makefile"
@@ -1463,7 +1446,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1467: checking for $ac_word" >&5
+echo "configure:1450: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1503,7 +1486,7 @@ rtems_save_CFLAGS=$CFLAGS
 CC=$CC_FOR_TARGET
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1507: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1490: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1513,11 +1496,11 @@ ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS
 cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext <<EOF
-#line 1517 "configure"
+#line 1500 "configure"
 #include "confdefs.h"
 main(){return(0);}
 EOF
-if { (eval echo configure:1521: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1537,12 +1520,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1541: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1524: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1546: checking whether we are using GNU C" >&5
+echo "configure:1529: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1551,7 +1534,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1555: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1538: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1566,7 +1549,7 @@ if test $ac_cv_prog_gcc = yes; then
   ac_save_CFLAGS="$CFLAGS"
   CFLAGS=
   echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1570: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1553: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1608,7 +1591,7 @@ unset ac_cv_prog_cc_cross
 
 
 echo $ac_n "checking whether $CC_FOR_TARGET accepts -specs""... $ac_c" 1>&6
-echo "configure:1612: checking whether $CC_FOR_TARGET accepts -specs" >&5
+echo "configure:1595: checking whether $CC_FOR_TARGET accepts -specs" >&5
 if eval "test \"`echo '$''{'rtems_cv_gcc_specs'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1629,7 +1612,7 @@ echo "$ac_t""$rtems_cv_gcc_specs" 1>&6
  
 
 echo $ac_n "checking whether $CC_FOR_TARGET accepts --pipe""... $ac_c" 1>&6
-echo "configure:1633: checking whether $CC_FOR_TARGET accepts --pipe" >&5
+echo "configure:1616: checking whether $CC_FOR_TARGET accepts --pipe" >&5
 if eval "test \"`echo '$''{'rtems_cv_gcc_pipe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1670,7 +1653,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1674: checking for $ac_word" >&5
+echo "configure:1657: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1710,7 +1693,7 @@ rtems_save_CXXFLAGS=$CXXFLAGS
 CXX=$CXX_FOR_TARGET
 
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1714: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:1697: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
 
 ac_ext=C
 # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1720,11 +1703,11 @@ ac_link='${CXX-g++} -o conftest $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $L
 cross_compiling=$ac_cv_prog_cxx_cross
 
 cat > conftest.$ac_ext <<EOF
-#line 1724 "configure"
+#line 1707 "configure"
 #include "confdefs.h"
 main(){return(0);}
 EOF
-if { (eval echo configure:1728: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1711: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   ac_cv_prog_cxx_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1750,12 +1733,12 @@ if test $ac_cv_prog_cxx_works = no; then
   { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1754: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1737: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
 cross_compiling=$ac_cv_prog_cxx_cross
 
 echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1759: checking whether we are using GNU C++" >&5
+echo "configure:1742: checking whether we are using GNU C++" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1764,7 +1747,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1768: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1751: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gxx=yes
 else
   ac_cv_prog_gxx=no
@@ -1779,7 +1762,7 @@ if test $ac_cv_prog_gxx = yes; then
   ac_save_CXXFLAGS="$CXXFLAGS"
   CXXFLAGS=
   echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1783: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1766: checking whether ${CXX-g++} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1833,7 +1816,7 @@ fi
 
   
 echo $ac_n "checking target's ar""... $ac_c" 1>&6
-echo "configure:1837: checking target's ar" >&5
+echo "configure:1820: checking target's ar" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1866,7 +1849,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable AR_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:1870: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5
+echo "configure:1853: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5
     case "$AR_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -1883,7 +1866,7 @@ echo "configure:1870: checking whether environment variable AR_FOR_TARGET is an
   # Extract the first word of ""$program_prefix"ar", so it can be a program name with args.
 set dummy "$program_prefix"ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1887: checking for $ac_word" >&5
+echo "configure:1870: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1916,7 +1899,7 @@ fi
 
   
 echo $ac_n "checking target's as""... $ac_c" 1>&6
-echo "configure:1920: checking target's as" >&5
+echo "configure:1903: checking target's as" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1949,7 +1932,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable AS_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:1953: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5
+echo "configure:1936: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5
     case "$AS_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -1966,7 +1949,7 @@ echo "configure:1953: checking whether environment variable AS_FOR_TARGET is an
   # Extract the first word of ""$program_prefix"as", so it can be a program name with args.
 set dummy "$program_prefix"as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1970: checking for $ac_word" >&5
+echo "configure:1953: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1999,7 +1982,7 @@ fi
 
   
 echo $ac_n "checking target's ld""... $ac_c" 1>&6
-echo "configure:2003: checking target's ld" >&5
+echo "configure:1986: checking target's ld" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2032,7 +2015,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable LD_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:2036: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5
+echo "configure:2019: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5
     case "$LD_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -2049,7 +2032,7 @@ echo "configure:2036: checking whether environment variable LD_FOR_TARGET is an
   # Extract the first word of ""$program_prefix"ld", so it can be a program name with args.
 set dummy "$program_prefix"ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2053: checking for $ac_word" >&5
+echo "configure:2036: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2082,7 +2065,7 @@ fi
 
   
 echo $ac_n "checking target's nm""... $ac_c" 1>&6
-echo "configure:2086: checking target's nm" >&5
+echo "configure:2069: checking target's nm" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2115,7 +2098,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable NM_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:2119: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5
+echo "configure:2102: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5
     case "$NM_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -2132,7 +2115,7 @@ echo "configure:2119: checking whether environment variable NM_FOR_TARGET is an
   # Extract the first word of ""$program_prefix"nm", so it can be a program name with args.
 set dummy "$program_prefix"nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2136: checking for $ac_word" >&5
+echo "configure:2119: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2166,7 +2149,7 @@ fi
 
   
 echo $ac_n "checking target's ranlib""... $ac_c" 1>&6
-echo "configure:2170: checking target's ranlib" >&5
+echo "configure:2153: checking target's ranlib" >&5
 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2199,7 +2182,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable RANLIB_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:2203: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5
+echo "configure:2186: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5
     case "$RANLIB_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -2216,7 +2199,7 @@ echo "configure:2203: checking whether environment variable RANLIB_FOR_TARGET is
   # Extract the first word of ""$program_prefix"ranlib", so it can be a program name with args.
 set dummy "$program_prefix"ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2220: checking for $ac_word" >&5
+echo "configure:2203: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2251,7 +2234,7 @@ fi
     # ranlib wasn't found; check if ar -s is available
     
 echo $ac_n "checking whether $AR_FOR_TARGET -s works""... $ac_c" 1>&6
-echo "configure:2255: checking whether $AR_FOR_TARGET -s works" >&5
+echo "configure:2238: checking whether $AR_FOR_TARGET -s works" >&5
 if eval "test \"`echo '$''{'rtems_cv_AR_FOR_TARGET_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2260,8 +2243,8 @@ cat > conftest.$ac_ext <<EOF
 int foo( int b ) 
 { return b; }
 EOF
-if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:2264: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
-  && { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:2265: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
+if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:2247: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
+  && { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:2248: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
   && test -s conftest.a ; \
 then
   rtems_cv_AR_FOR_TARGET_S="yes"
@@ -2286,7 +2269,7 @@ echo "$ac_t""$rtems_cv_AR_FOR_TARGET_S" 1>&6
 
   
 echo $ac_n "checking target's objcopy""... $ac_c" 1>&6
-echo "configure:2290: checking target's objcopy" >&5
+echo "configure:2273: checking target's objcopy" >&5
 if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2319,7 +2302,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:2323: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5
+echo "configure:2306: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5
     case "$OBJCOPY_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -2336,7 +2319,7 @@ echo "configure:2323: checking whether environment variable OBJCOPY_FOR_TARGET i
   # Extract the first word of ""$program_prefix"objcopy", so it can be a program name with args.
 set dummy "$program_prefix"objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2340: checking for $ac_word" >&5
+echo "configure:2323: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2369,7 +2352,7 @@ fi
 
   
 echo $ac_n "checking target's size""... $ac_c" 1>&6
-echo "configure:2373: checking target's size" >&5
+echo "configure:2356: checking target's size" >&5
 if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2402,7 +2385,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable SIZE_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:2406: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5
+echo "configure:2389: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5
     case "$SIZE_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -2419,7 +2402,7 @@ echo "configure:2406: checking whether environment variable SIZE_FOR_TARGET is a
   # Extract the first word of ""$program_prefix"size", so it can be a program name with args.
 set dummy "$program_prefix"size; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2423: checking for $ac_word" >&5
+echo "configure:2406: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2455,7 +2438,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2459: checking for $ac_word" >&5
+echo "configure:2442: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2484,7 +2467,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2488: checking for $ac_word" >&5
+echo "configure:2471: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2532,7 +2515,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2536: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2519: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2542,11 +2525,11 @@ ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS
 cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext <<EOF
-#line 2546 "configure"
+#line 2529 "configure"
 #include "confdefs.h"
 main(){return(0);}
 EOF
-if { (eval echo configure:2550: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2533: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2566,12 +2549,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2570: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2553: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2575: checking whether we are using GNU C" >&5
+echo "configure:2558: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2580,7 +2563,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2584: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2567: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2595,7 +2578,7 @@ if test $ac_cv_prog_gcc = yes; then
   ac_save_CFLAGS="$CFLAGS"
   CFLAGS=
   echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2599: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2582: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2624,19 +2607,19 @@ fi
 
 
 echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6
-echo "configure:2628: checking for Cygwin32 environment" >&5
+echo "configure:2611: checking for Cygwin32 environment" >&5
 if eval "test \"`echo '$''{'rtems_cv_cygwin32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2633 "configure"
+#line 2616 "configure"
 #include "confdefs.h"
 
 int main() {
 return __CYGWIN32__;
 ; return 0; }
 EOF
-if { (eval echo configure:2640: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2623: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   rtems_cv_cygwin32=yes
 else
@@ -2654,7 +2637,7 @@ CYGWIN32=
 test "$rtems_cv_cygwin32" = yes && CYGWIN32=yes
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2658: checking for executable suffix" >&5
+echo "configure:2641: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'rtems_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2687,12 +2670,12 @@ esac
 for ac_func in strerror
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2691: checking for $ac_func" >&5
+echo "configure:2674: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2696 "configure"
+#line 2679 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2715,7 +2698,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2719: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2702: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2744,7 +2727,7 @@ if test "$target_cpu" = "unix" ; then
    
 
 echo $ac_n "checking whether $RTEMS_HOST supports System V semaphores""... $ac_c" 1>&6
-echo "configure:2748: checking whether $RTEMS_HOST supports System V semaphores" >&5
+echo "configure:2731: checking whether $RTEMS_HOST supports System V semaphores" >&5
 if eval "test \"`echo '$''{'rtems_cv_sysv_sem'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2753,7 +2736,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 2757 "configure"
+#line 2740 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -2779,7 +2762,7 @@ int main () {
 }
 
 EOF
-if { (eval echo configure:2783: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2766: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   rtems_cv_sysv_sem="yes"
 else
@@ -2802,7 +2785,7 @@ echo "$ac_t""$rtems_cv_sysv_sem" 1>&6
    
 
 echo $ac_n "checking whether $RTEMS_HOST supports System V shared memory""... $ac_c" 1>&6
-echo "configure:2806: checking whether $RTEMS_HOST supports System V shared memory" >&5
+echo "configure:2789: checking whether $RTEMS_HOST supports System V shared memory" >&5
 if eval "test \"`echo '$''{'rtems_cv_sysv_shm'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2811,7 +2794,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 2815 "configure"
+#line 2798 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -2827,7 +2810,7 @@ int main () {
 }
 
 EOF
-if { (eval echo configure:2831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2814: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   rtems_cv_sysv_shm="yes"
 else
@@ -2850,7 +2833,7 @@ echo "$ac_t""$rtems_cv_sysv_shm" 1>&6
    
 
 echo $ac_n "checking whether $RTEMS_HOST supports System V messages""... $ac_c" 1>&6
-echo "configure:2854: checking whether $RTEMS_HOST supports System V messages" >&5
+echo "configure:2837: checking whether $RTEMS_HOST supports System V messages" >&5
 if eval "test \"`echo '$''{'rtems_cv_sysv_msg'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2859,7 +2842,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 2863 "configure"
+#line 2846 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -2875,7 +2858,7 @@ int main () {
 }
 
 EOF
-if { (eval echo configure:2879: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2862: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   rtems_cv_sysv_msg="yes"
 else
@@ -2900,7 +2883,7 @@ fi
 # find all the Executive Makefiles
 
 echo $ac_n "checking for Makefile.in in c/src/exec/score/tools/$target_cpu""... $ac_c" 1>&6
-echo "configure:2904: checking for Makefile.in in c/src/exec/score/tools/$target_cpu" >&5
+echo "configure:2887: checking for Makefile.in in c/src/exec/score/tools/$target_cpu" >&5
 if test -d $srcdir/c/src/exec/score/tools/$target_cpu; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -2915,7 +2898,7 @@ fi
 
 
 echo $ac_n "checking for Makefile.in in c/src/exec/rtems""... $ac_c" 1>&6
-echo "configure:2919: checking for Makefile.in in c/src/exec/rtems" >&5
+echo "configure:2902: checking for Makefile.in in c/src/exec/rtems" >&5
 if test -d $srcdir/c/src/exec/rtems; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -2930,7 +2913,7 @@ fi
 
 
 echo $ac_n "checking for Makefile.in in c/src/exec/sapi""... $ac_c" 1>&6
-echo "configure:2934: checking for Makefile.in in c/src/exec/sapi" >&5
+echo "configure:2917: checking for Makefile.in in c/src/exec/sapi" >&5
 if test -d $srcdir/c/src/exec/sapi; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -2947,7 +2930,7 @@ fi
 if test "$RTEMS_HAS_POSIX_API" = "yes"; then
   
 echo $ac_n "checking for Makefile.in in c/src/exec/posix""... $ac_c" 1>&6
-echo "configure:2951: checking for Makefile.in in c/src/exec/posix" >&5
+echo "configure:2934: checking for Makefile.in in c/src/exec/posix" >&5
 if test -d $srcdir/c/src/exec/posix; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -2969,7 +2952,7 @@ if test -d "$srcdir/c/src/lib/libbsp/$target_cpu"; then
 
   if test -z "$rtems_bsp"; then
     echo $ac_n "checking for bsps""... $ac_c" 1>&6
-echo "configure:2973: checking for bsps" >&5
+echo "configure:2956: checking for bsps" >&5
     files=`ls $srcdir/c/src/lib/libbsp/$target_cpu`
     for file in $files; do
       case $file in
@@ -3034,7 +3017,7 @@ echo "configure:2973: checking for bsps" >&5
         bspdirs="$bspdirs $bspdir"
         
 echo $ac_n "checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir""... $ac_c" 1>&6
-echo "configure:3038: checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir" >&5
+echo "configure:3021: checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir" >&5
 if test -d $srcdir/c/src/lib/libbsp/$bspcpudir$bspdir; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3049,7 +3032,7 @@ fi
 
         
 echo $ac_n "checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared""... $ac_c" 1>&6
-echo "configure:3053: checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared" >&5
+echo "configure:3036: checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared" >&5
 if test -d $srcdir/c/src/lib/libbsp/${bspcpudir}shared; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3072,7 +3055,7 @@ fi
 # find all the CPU dependent library Makefiles
 
 echo $ac_n "checking for Makefile.in in c/src/lib/libcpu/$target_cpu""... $ac_c" 1>&6
-echo "configure:3076: checking for Makefile.in in c/src/lib/libcpu/$target_cpu" >&5
+echo "configure:3059: checking for Makefile.in in c/src/lib/libcpu/$target_cpu" >&5
 if test -d $srcdir/c/src/lib/libcpu/$target_cpu; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3089,7 +3072,7 @@ fi
 if test "$skip_startfiles" != "yes"; then
   
 echo $ac_n "checking for Makefile.in in c/src/lib/start/$target_cpu""... $ac_c" 1>&6
-echo "configure:3093: checking for Makefile.in in c/src/lib/start/$target_cpu" >&5
+echo "configure:3076: checking for Makefile.in in c/src/lib/start/$target_cpu" >&5
 if test -d $srcdir/c/src/lib/start/$target_cpu; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3119,22 +3102,14 @@ else
   inline_dir=inline
 fi
 
-# If the KA9Q TCP/IP stack is enabled, then find all KA9Q Makefiles
-echo $ac_n "checking if KA9Q networking is enabled? ""... $ac_c" 1>&6
-echo "configure:3125: checking if KA9Q networking is enabled? " >&5
-echo "$ac_t""$RTEMS_HAS_KA9Q" 1>&6
-if test "$RTEMS_HAS_KA9Q" = "yes"; then
-  makefiles="$makefiles c/src/lib/libka9q/Makefile"
-fi
-
 # If the TCP/IP stack is enabled, then find all TCP/IP Makefiles
 echo $ac_n "checking if networking is enabled? ""... $ac_c" 1>&6
-echo "configure:3133: checking if networking is enabled? " >&5
+echo "configure:3108: checking if networking is enabled? " >&5
 echo "$ac_t""$RTEMS_HAS_NETWORKING" 1>&6
 if test "$RTEMS_HAS_NETWORKING" = "yes"; then
   
 echo $ac_n "checking for Makefile.in in c/src/lib/libnetworking""... $ac_c" 1>&6
-echo "configure:3138: checking for Makefile.in in c/src/lib/libnetworking" >&5
+echo "configure:3113: checking for Makefile.in in c/src/lib/libnetworking" >&5
 if test -d $srcdir/c/src/lib/libnetworking; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3156,7 +3131,7 @@ fi
 
 # If the tests are enabled, then find all the test suite Makefiles
 echo $ac_n "checking if the test suites are enabled? ""... $ac_c" 1>&6
-echo "configure:3160: checking if the test suites are enabled? " >&5
+echo "configure:3135: checking if the test suites are enabled? " >&5
 tests_enabled=yes
 # Check whether --enable-tests or --disable-tests was given.
 if test "${enable_tests+set}" = set; then
@@ -3175,7 +3150,7 @@ fi
 
 
 echo $ac_n "checking for Makefile.in in c/src/tests/tools/$target_cpu""... $ac_c" 1>&6
-echo "configure:3179: checking for Makefile.in in c/src/tests/tools/$target_cpu" >&5
+echo "configure:3154: checking for Makefile.in in c/src/tests/tools/$target_cpu" >&5
 if test -d $srcdir/c/src/tests/tools/$target_cpu; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3192,7 +3167,7 @@ fi
 if test "$tests_enabled" = "yes"; then
    
 echo $ac_n "checking for Makefile.in in c/src/tests/libtests""... $ac_c" 1>&6
-echo "configure:3196: checking for Makefile.in in c/src/tests/libtests" >&5
+echo "configure:3171: checking for Makefile.in in c/src/tests/libtests" >&5
 if test -d $srcdir/c/src/tests/libtests; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3207,7 +3182,7 @@ fi
 
    
 echo $ac_n "checking for Makefile.in in c/src/tests/sptests""... $ac_c" 1>&6
-echo "configure:3211: checking for Makefile.in in c/src/tests/sptests" >&5
+echo "configure:3186: checking for Makefile.in in c/src/tests/sptests" >&5
 if test -d $srcdir/c/src/tests/sptests; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3222,7 +3197,7 @@ fi
 
    
 echo $ac_n "checking for Makefile.in in c/src/tests/tmtests""... $ac_c" 1>&6
-echo "configure:3226: checking for Makefile.in in c/src/tests/tmtests" >&5
+echo "configure:3201: checking for Makefile.in in c/src/tests/tmtests" >&5
 if test -d $srcdir/c/src/tests/tmtests; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3237,7 +3212,7 @@ fi
 
    
 echo $ac_n "checking for Makefile.in in c/src/tests/mptests""... $ac_c" 1>&6
-echo "configure:3241: checking for Makefile.in in c/src/tests/mptests" >&5
+echo "configure:3216: checking for Makefile.in in c/src/tests/mptests" >&5
 if test -d $srcdir/c/src/tests/mptests; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3253,7 +3228,7 @@ fi
    if test "$RTEMS_HAS_POSIX_API" = "yes"; then
      
 echo $ac_n "checking for Makefile.in in c/src/tests/psxtests""... $ac_c" 1>&6
-echo "configure:3257: checking for Makefile.in in c/src/tests/psxtests" >&5
+echo "configure:3232: checking for Makefile.in in c/src/tests/psxtests" >&5
 if test -d $srcdir/c/src/tests/psxtests; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3271,7 +3246,7 @@ fi
 
 # If the HWAPI is enabled, the find the HWAPI Makefiles
 echo $ac_n "checking if the HWAPI is enabled? ""... $ac_c" 1>&6
-echo "configure:3275: checking if the HWAPI is enabled? " >&5
+echo "configure:3250: checking if the HWAPI is enabled? " >&5
 # Check whether --enable-hwapi or --disable-hwapi was given.
 if test "${enable_hwapi+set}" = set; then
   enableval="$enable_hwapi"
@@ -3282,7 +3257,7 @@ if test "${enable_hwapi+set}" = set; then
             makefiles="$makefiles c/src/lib/libhwapi/Makefile"
             
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/analog""... $ac_c" 1>&6
-echo "configure:3286: checking for Makefile.in in c/src/lib/libhwapi/analog" >&5
+echo "configure:3261: checking for Makefile.in in c/src/lib/libhwapi/analog" >&5
 if test -d $srcdir/c/src/lib/libhwapi/analog; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3297,7 +3272,7 @@ fi
 
             
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/discrete""... $ac_c" 1>&6
-echo "configure:3301: checking for Makefile.in in c/src/lib/libhwapi/discrete" >&5
+echo "configure:3276: checking for Makefile.in in c/src/lib/libhwapi/discrete" >&5
 if test -d $srcdir/c/src/lib/libhwapi/discrete; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3312,7 +3287,7 @@ fi
 
             
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/drivers""... $ac_c" 1>&6
-echo "configure:3316: checking for Makefile.in in c/src/lib/libhwapi/drivers" >&5
+echo "configure:3291: checking for Makefile.in in c/src/lib/libhwapi/drivers" >&5
 if test -d $srcdir/c/src/lib/libhwapi/drivers; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3327,7 +3302,7 @@ fi
 
             
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory""... $ac_c" 1>&6
-echo "configure:3331: checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory" >&5
+echo "configure:3306: checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory" >&5
 if test -d $srcdir/c/src/lib/libhwapi/non_volatile_memory; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3342,7 +3317,7 @@ fi
 
             
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/serial""... $ac_c" 1>&6
-echo "configure:3346: checking for Makefile.in in c/src/lib/libhwapi/serial" >&5
+echo "configure:3321: checking for Makefile.in in c/src/lib/libhwapi/serial" >&5
 if test -d $srcdir/c/src/lib/libhwapi/serial; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3357,7 +3332,7 @@ fi
 
             
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/support""... $ac_c" 1>&6
-echo "configure:3361: checking for Makefile.in in c/src/lib/libhwapi/support" >&5
+echo "configure:3336: checking for Makefile.in in c/src/lib/libhwapi/support" >&5
 if test -d $srcdir/c/src/lib/libhwapi/support; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3372,7 +3347,7 @@ fi
 
             
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/wrapup""... $ac_c" 1>&6
-echo "configure:3376: checking for Makefile.in in c/src/lib/libhwapi/wrapup" >&5
+echo "configure:3351: checking for Makefile.in in c/src/lib/libhwapi/wrapup" >&5
 if test -d $srcdir/c/src/lib/libhwapi/wrapup; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3414,11 +3389,10 @@ fi
 
 
 
-
 # pick up all the Makefiles in required parts of the tree
 
 echo $ac_n "checking for Makefile.in in c/build-tools""... $ac_c" 1>&6
-echo "configure:3422: checking for Makefile.in in c/build-tools" >&5
+echo "configure:3396: checking for Makefile.in in c/build-tools" >&5
 if test -d $srcdir/c/build-tools; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3433,7 +3407,7 @@ fi
 
 
 echo $ac_n "checking for Makefile.in in make""... $ac_c" 1>&6
-echo "configure:3437: checking for Makefile.in in make" >&5
+echo "configure:3411: checking for Makefile.in in make" >&5
 if test -d $srcdir/make; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3448,7 +3422,7 @@ fi
 
 
 echo $ac_n "checking for Makefile.in in c/src/lib/libmisc""... $ac_c" 1>&6
-echo "configure:3452: checking for Makefile.in in c/src/lib/libmisc" >&5
+echo "configure:3426: checking for Makefile.in in c/src/lib/libmisc" >&5
 if test -d $srcdir/c/src/lib/libmisc; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3463,7 +3437,7 @@ fi
 
 
 echo $ac_n "checking for Makefile.in in c/src/tests/samples""... $ac_c" 1>&6
-echo "configure:3467: checking for Makefile.in in c/src/tests/samples" >&5
+echo "configure:3441: checking for Makefile.in in c/src/tests/samples" >&5
 if test -d $srcdir/c/src/tests/samples; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3694,7 +3668,6 @@ s%@RTEMS_HOST@%$RTEMS_HOST%g
 s%@RTEMS_LIBC_DIR@%$RTEMS_LIBC_DIR%g
 s%@RTEMS_USE_OWN_PDIR@%$RTEMS_USE_OWN_PDIR%g
 s%@RTEMS_HAS_POSIX_API@%$RTEMS_HAS_POSIX_API%g
-s%@RTEMS_HAS_KA9Q@%$RTEMS_HAS_KA9Q%g
 s%@RTEMS_HAS_NETWORKING@%$RTEMS_HAS_NETWORKING%g
 s%@RTEMS_USE_MACROS@%$RTEMS_USE_MACROS%g
 s%@RTEMS_HAS_CPLUSPLUS@%$RTEMS_HAS_CPLUSPLUS%g