summaryrefslogtreecommitdiffstats
path: root/c
diff options
context:
space:
mode:
authorJoel Sherrill <joel.sherrill@OARcorp.com>2003-09-26 21:38:59 +0000
committerJoel Sherrill <joel.sherrill@OARcorp.com>2003-09-26 21:38:59 +0000
commitee5171b968d87e2807608c64c8a2692d69299ff4 (patch)
tree8c5b25454afb686ce313316bc700d06e27d27c78 /c
parent487c286c32e7f9cc01a6124c57753301bba398cb (diff)
downloadrtems-ee5171b968d87e2807608c64c8a2692d69299ff4.tar.bz2
2003-09-26 Joel Sherrill <joel@OARcorp.com>
* hppa1.1/.cvsignore, hppa1.1/ChangeLog, hppa1.1/Makefile.am, hppa1.1/acinclude.m4, hppa1.1/configure.ac, hppa1.1/simhppa/.cvsignore, hppa1.1/simhppa/ChangeLog, hppa1.1/simhppa/Makefile.am, hppa1.1/simhppa/bsp_specs, hppa1.1/simhppa/configure.ac, hppa1.1/simhppa/times, hppa1.1/simhppa/include/.cvsignore, hppa1.1/simhppa/include/Makefile.am, hppa1.1/simhppa/include/bsp.h, hppa1.1/simhppa/include/ttydrv.h, hppa1.1/simhppa/shmsupp/.cvsignore, hppa1.1/simhppa/shmsupp/Makefile.am, hppa1.1/simhppa/shmsupp/README, hppa1.1/simhppa/shmsupp/addrconv.c, hppa1.1/simhppa/shmsupp/cause_intr.c, hppa1.1/simhppa/shmsupp/getcfg.c, hppa1.1/simhppa/shmsupp/lock.c, hppa1.1/simhppa/shmsupp/mpisr.c, hppa1.1/simhppa/start/.cvsignore, hppa1.1/simhppa/start/Makefile.am, hppa1.1/simhppa/start/start.S, hppa1.1/simhppa/startup/.cvsignore, hppa1.1/simhppa/startup/Makefile.am, hppa1.1/simhppa/startup/bspclean.c, hppa1.1/simhppa/startup/bspstart.c, hppa1.1/simhppa/startup/linkcmds, hppa1.1/simhppa/startup/setvec.c, hppa1.1/simhppa/tools/.cvsignore, hppa1.1/simhppa/tools/ChangeLog, hppa1.1/simhppa/tools/Makefile.am, hppa1.1/simhppa/tools/configure.ac, hppa1.1/simhppa/tools/print_dump.c, hppa1.1/simhppa/tty/.cvsignore, hppa1.1/simhppa/tty/Makefile.am, hppa1.1/simhppa/tty/tty.c, hppa1.1/simhppa/wrapup/.cvsignore, hppa1.1/simhppa/wrapup/Makefile.am: Removed.
Diffstat (limited to 'c')
-rw-r--r--c/src/lib/libbsp/hppa1.1/.cvsignore14
-rw-r--r--c/src/lib/libbsp/hppa1.1/ChangeLog73
-rw-r--r--c/src/lib/libbsp/hppa1.1/Makefile.am11
-rw-r--r--c/src/lib/libbsp/hppa1.1/acinclude.m411
-rw-r--r--c/src/lib/libbsp/hppa1.1/configure.ac22
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/.cvsignore14
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/ChangeLog203
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/Makefile.am16
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/bsp_specs12
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/configure.ac38
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/include/.cvsignore6
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.am33
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/include/bsp.h116
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/include/ttydrv.h54
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/.cvsignore2
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.am31
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/README9
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/addrconv.c29
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/cause_intr.c50
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/getcfg.c88
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/lock.c74
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/mpisr.c26
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/start/.cvsignore2
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/start/Makefile.am30
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/start/start.S173
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/startup/.cvsignore2
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.am41
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/startup/bspclean.c35
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/startup/bspstart.c241
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/startup/linkcmds46
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/startup/setvec.c65
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/times7
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/tools/.cvsignore18
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/tools/ChangeLog71
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.am16
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/tools/configure.ac25
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/tools/print_dump.c338
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/tty/.cvsignore2
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.am31
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/tty/tty.c247
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/wrapup/.cvsignore2
-rw-r--r--c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.am37
42 files changed, 0 insertions, 2361 deletions
diff --git a/c/src/lib/libbsp/hppa1.1/.cvsignore b/c/src/lib/libbsp/hppa1.1/.cvsignore
deleted file mode 100644
index bfdfd995be..0000000000
--- a/c/src/lib/libbsp/hppa1.1/.cvsignore
+++ /dev/null
@@ -1,14 +0,0 @@
-aclocal.m4
-autom4te*.cache
-config.cache
-config.guess
-config.log
-config.status
-config.sub
-configure
-depcomp
-install-sh
-Makefile
-Makefile.in
-missing
-mkinstalldirs
diff --git a/c/src/lib/libbsp/hppa1.1/ChangeLog b/c/src/lib/libbsp/hppa1.1/ChangeLog
deleted file mode 100644
index 5899046e05..0000000000
--- a/c/src/lib/libbsp/hppa1.1/ChangeLog
+++ /dev/null
@@ -1,73 +0,0 @@
-2003-08-18 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: Reflect having moved aclocal/.
-
-2003-08-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: Reflect having moved automake/.
-
-2003-08-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: Use rtems-bugs@rtems.com as bug report email address.
-
-2003-03-06 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: Remove AC_CONFIG_AUX_DIR.
-
-2003-02-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
-
-2003-02-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: AC_PREREQ(2.57).
-
-2002-12-06 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: Remove RTEMS_CHECK_BSP_CACHE.
-
-2002-12-02 Joel Sherrill <joel@OARcorp.com>
-
- * pxfl/.cvsignore, pxfl/Makefile.in, pxfl/README,
- pxfl/floss-bsp.h: Removed.
-
-2002-10-21 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * .cvsignore: Reformat.
- Add autom4te*cache.
- Remove autom4te.cache.
-
-2002-03-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac:
- AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
- AM_INIT_AUTOMAKE([no-define foreign 1.6]).
- * Makefile.am: Remove AUTOMAKE_OPTIONS.
-
-2001-10-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * .cvsignore: Add autom4te.cache for autoconf > 2.52.
- * configure.in: Remove.
- * configure.ac: New file, generated from configure.in by autoupdate.
-
-2001-10-09 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * acinclude.m4: New file.
- * configure.in: Use RTEMS_BSP_SUBDIR.
-
-2000-11-09 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
-
-2000-11-02 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.
-
-2000-10-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
- Switch to GNU canonicalization.
-
-2000-08-10 Joel Sherrill <joel@OARcorp.com>
-
- * ChangeLog: New file.
diff --git a/c/src/lib/libbsp/hppa1.1/Makefile.am b/c/src/lib/libbsp/hppa1.1/Makefile.am
deleted file mode 100644
index e96d0adc39..0000000000
--- a/c/src/lib/libbsp/hppa1.1/Makefile.am
+++ /dev/null
@@ -1,11 +0,0 @@
-##
-## $Id$
-##
-
-ACLOCAL_AMFLAGS = -I ../../../aclocal
-
-# Descend into the $(RTEMS_BSP_FAMILY) directory
-SUBDIRS = $(RTEMS_BSP_FAMILY)
-
-include $(top_srcdir)/../../../automake/subdirs.am
-include $(top_srcdir)/../../../automake/local.am
diff --git a/c/src/lib/libbsp/hppa1.1/acinclude.m4 b/c/src/lib/libbsp/hppa1.1/acinclude.m4
deleted file mode 100644
index a0341e0e19..0000000000
--- a/c/src/lib/libbsp/hppa1.1/acinclude.m4
+++ /dev/null
@@ -1,11 +0,0 @@
-# RTEMS_CHECK_BSPDIR(RTEMS_BSP)
-AC_DEFUN([RTEMS_CHECK_BSPDIR],
-[
- RTEMS_BSP_ALIAS(ifelse([$1],,[${RTEMS_BSP}],[$1]),bspdir)
- case "$bspdir" in
- simhppa )
- AC_CONFIG_SUBDIRS([simhppa]);;
- *)
- AC_MSG_ERROR([Invalid BSP]);;
- esac
-])
diff --git a/c/src/lib/libbsp/hppa1.1/configure.ac b/c/src/lib/libbsp/hppa1.1/configure.ac
deleted file mode 100644
index b4bbb871f3..0000000000
--- a/c/src/lib/libbsp/hppa1.1/configure.ac
+++ /dev/null
@@ -1,22 +0,0 @@
-## Process this file with autoconf to produce a configure script.
-##
-## $Id$
-
-AC_PREREQ(2.57)
-AC_INIT([rtems-c-src-lib-libbsp-hppa1.1],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
-AC_CONFIG_SRCDIR([simhppa])
-RTEMS_TOP(../../../../..)
-
-RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define foreign 1.7.2])
-AM_MAINTAINER_MODE
-
-RTEMS_ENV_RTEMSBSP
-RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP)
-RTEMS_PROJECT_ROOT
-
-RTEMS_CHECK_BSPDIR([$RTEMS_BSP])
-
-# Explicitly list all Makefiles here
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/.cvsignore b/c/src/lib/libbsp/hppa1.1/simhppa/.cvsignore
deleted file mode 100644
index bfdfd995be..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/.cvsignore
+++ /dev/null
@@ -1,14 +0,0 @@
-aclocal.m4
-autom4te*.cache
-config.cache
-config.guess
-config.log
-config.status
-config.sub
-configure
-depcomp
-install-sh
-Makefile
-Makefile.in
-missing
-mkinstalldirs
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/ChangeLog b/c/src/lib/libbsp/hppa1.1/simhppa/ChangeLog
deleted file mode 100644
index b82e95cba4..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/ChangeLog
+++ /dev/null
@@ -1,203 +0,0 @@
-2003-09-19 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * bsp_specs: Remove *lib:.
-
-2003-09-04 Joel Sherrill <joel@OARcorp.com>
-
- * include/bsp.h, shmsupp/addrconv.c, shmsupp/cause_intr.c,
- shmsupp/getcfg.c, shmsupp/lock.c, shmsupp/mpisr.c,
- startup/bspclean.c, startup/bspstart.c, startup/setvec.c,
- tools/print_dump.c, tty/tty.c: URL for license changed.
-
-2003-08-18 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: Reflect having moved aclocal/.
-
-2003-08-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: Reflect having moved automake/.
- * include/Makefile.am: Reflect having moved automake/.
- * shmsupp/Makefile.am: Reflect having moved automake/.
- * start/Makefile.am: Reflect having moved automake/.
- * startup/Makefile.am: Reflect having moved automake/.
- * tty/Makefile.am: Reflect having moved automake/.
- * wrapup/Makefile.am: Reflect having moved automake/.
-
-2003-08-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: Use rtems-bugs@rtems.com as bug report email address.
-
-2003-08-06 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- PR 445/bsps
- * bsp_specs: Remove -D__embedded__ -Asystem(embedded) from cpp.
- Remove cpp, old_cpp (now unused).
-
-2003-03-06 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: Remove AC_CONFIG_AUX_DIR.
-
-2003-02-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
-
-2003-02-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: AC_PREREQ(2.57).
-
-2003-01-20 Joel Sherrill <joel@OARcorp.com>
-
- * startup/linkcmds: Add FreeBSD SYSCTL() sections for networking.
-
-2003-01-15 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * shmsupp/Makefile.am: Don't include @RTEMS_BSP@.cfg.
- * start/Makefile.am: Don't include @RTEMS_BSP@.cfg.
- * startup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
- * tty/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-
-2002-12-19 Joel Sherrill <joel@OARcorp.com>
-
- * start/start.S: Per PR329 now compiles with GNU tools.
- * startup/linkcmds: New file. Now almost links.
-
-2002-12-19 Joel Sherrill <joel@OARcorp.com>
-
- * start/start.S: Per PR329 now compiles with GNU tools.
-
-2002-12-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * include/Makefile.am: Fix broken preinstall-deps.
-
-2002-12-12 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * start/Makefile.am: Use install-data-local to install startfile.
-
-2002-12-10 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * wrapup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-
-2002-10-21 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * .cvsignore: Reformat.
- Add autom4te*cache.
- Remove autom4te.cache.
-
-2002-08-21 Joel Sherrill <joel@OARcorp.com>
-
- * bsp_specs: Added support for -nostdlibs.
-
-2002-08-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * shmsupp/Makefile.am: Use .$(OBJEXT) instead of .o.
- * start/Makefile.am: Use .$(OBJEXT) instead of .o.
- * startup/Makefile.am: Use .$(OBJEXT) instead of .o.
- * tty/Makefile.am: Use .$(OBJEXT) instead of .o.
- * wrapup/Makefile.am: Use .$(OBJEXT) instead of .o.
-
-2002-07-21 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * start/Makefile.am: Eliminate PGMS.
- Add bsplib_DATA = $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o.
-
-2002-07-04 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * wrapup/Makefile.am: Eliminate TMPINSTALL_FILES.
- Remove $(OBJS) from all-local.
-
-2002-06-29 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * wrapup/Makefile.am: Remove preinstallation of libbsp.a,
-
-2002-06-27 Joel Sherrill <joel@OARcorp.com>
-
- * Makefile.am, bsp_specs: Now this target almost compiles again.
-
-2002-03-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac:
- AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
- AM_INIT_AUTOMAKE([no-define foreign 1.6]).
- * include/Makefile.am: Remove AUTOMAKE_OPTIONS.
- * Makefile.am: Remove AUTOMAKE_OPTIONS.
- * shmsupp/Makefile.am: Remove AUTOMAKE_OPTIONS.
- * start/Makefile.am: Remove AUTOMAKE_OPTIONS.
- * startup/Makefile.am: Remove AUTOMAKE_OPTIONS.
- * tty/Makefile.am: Remove AUTOMAKE_OPTIONS.
- * wrapup/Makefile.am: Remove AUTOMAKE_OPTIONS.
-
-2001-12-22 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * bsp_specs: Replace -lrtemsall with -lrtemsbsp -lrtemscpu,
- replace -lrtemsall_g with -lrtemsbsp_g -lrtemscpu_g.
-
-2001-11-30 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: Introduce RTEMS_BSP_CONFIGURE.
-
-2001-11-15 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: Add RTEMS_BSPOPTS_*(SIMHPPA_FAST_IDLE),
- remove RTEMS_OUTPUT_BUILD_SUBDIRS.
-
-2001-10-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * .cvsignore: Add autom4te.cache for autoconf > 2.52.
- * configure.in: Remove.
- * configure.ac: New file, generated from configure.in by autoupdate.
-
-2001-09-27 Joel Sherrill <joel@OARcorp.com>
-
- * include/bsp.h: Renamed delay() to rtems_bsp_delay().
-
-2001-09-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * include/Makefile.am: Use 'CLEANFILES ='.
- * include/Makefile.am: Use 'TMPINSTALL_FILES ='.
-
-2001-05-26 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.in: Add bspopts.h.
- * include/.cvsignore: Add bspopts.h*, stamp-h*.
- * include/Makefile.am: Use *_HEADERS instead of *H_FILES.
- * include/bsp.h: Include bspopts.h.
-
-2001-05-10 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.in: Use RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]).
-
-2000-11-09 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
-
-2000-11-02 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.
-
-2000-11-01 Joel Sherrill <joel@OARcorp.com>
-
- * startup/bspstart.c: assoc.h, error.h, libio_.h, libio.h,
- and libcsupport.h moved from libc to lib/include/rtems and
- now must be referenced as <rtems/XXX.h>. Header file order
- was cleaned up while doing this.
-
-2000-10-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.in, Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
- Switch to GNU canonicalization.
-
-2000-09-25 Joel Sherrill <joel@OARcorp.com>
-
- * include/bsp.h: tty_* renamed to console_*.
- * tty/tty.c: Ditto.
- * shmsupp/addrconv.c: Typo fixed.
- * wrapup/Makefile.am: Merge startup not start directory.
-
-2000-09-04 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * shmsupp/Makefile.am, start/Makefile.am, startup/Makefile.am,
- tty/Makefile.am, wrapup/Makefile.am: Include compile.am
-
-2000-08-10 Joel Sherrill <joel@OARcorp.com>
-
- * ChangeLog: New file.
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.am b/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.am
deleted file mode 100644
index 614605bf2a..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/Makefile.am
+++ /dev/null
@@ -1,16 +0,0 @@
-##
-## $Id$
-##
-
-ACLOCAL_AMFLAGS = -I ../../../../aclocal
-
-# wrapup is the one that actually builds and installs the library
-# from the individual .rel files built in other directories
-SUBDIRS = . include start startup tty shmsupp wrapup tools
-
-include $(top_srcdir)/../../bsp.am
-
-EXTRA_DIST = bsp_specs times
-
-include $(top_srcdir)/../../../../automake/subdirs.am
-include $(top_srcdir)/../../../../automake/local.am
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/bsp_specs b/c/src/lib/libbsp/hppa1.1/simhppa/bsp_specs
deleted file mode 100644
index de8ff74885..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/bsp_specs
+++ /dev/null
@@ -1,12 +0,0 @@
-%rename endfile old_endfile
-%rename startfile old_startfile
-%rename link old_link
-
-*startfile:
-%{!qrtems: %(old_startfile)} %{!nostdlib: %{qrtems: \
-%{!qrtems_debug: start.o%s} \
-%{qrtems_debug: start_g.o%s}}}
-
-*link:
-%{!qrtems: %(old_link)} %{qrtems: -dc -dp -N -e start}
-
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/configure.ac b/c/src/lib/libbsp/hppa1.1/simhppa/configure.ac
deleted file mode 100644
index 89dd51008b..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/configure.ac
+++ /dev/null
@@ -1,38 +0,0 @@
-## Process this file with autoconf to produce a configure script.
-##
-## $Id$
-
-AC_PREREQ(2.57)
-AC_INIT([rtems-c-src-lib-libbsp-hppa1.1-simhppa],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
-AC_CONFIG_SRCDIR([bsp_specs])
-RTEMS_TOP(../../../../../..)
-
-RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define foreign 1.7.2])
-RTEMS_BSP_CONFIGURE
-
-RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
-RTEMS_CANONICALIZE_TOOLS
-
-RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP)
-
-AM_CONDITIONAL(HAS_MP,test "$HAS_MP" = "yes")
-
-RTEMS_CONFIG_BUILD_SUBDIRS(tools)
-
-RTEMS_BSPOPTS_SET([SIMHPPA_FAST_IDLE],[*],[1])
-RTEMS_BSPOPTS_HELP([SIMHPPA_FAST_IDLE],
-[If defined, speed up the clock ticks while the idle task is running so
- time spent in the idle task is minimized. This significantly reduces
- the wall time required to execute the RTEMS test suites.])
-
-
-# Explicitly list all Makefiles here
-AC_CONFIG_FILES([Makefile
-include/Makefile
-shmsupp/Makefile
-start/Makefile
-startup/Makefile
-tty/Makefile
-wrapup/Makefile])
-AC_OUTPUT
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/include/.cvsignore b/c/src/lib/libbsp/hppa1.1/simhppa/include/.cvsignore
deleted file mode 100644
index b0be3c54e6..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/include/.cvsignore
+++ /dev/null
@@ -1,6 +0,0 @@
-Makefile
-Makefile.in
-bspopts.h
-bspopts.h.in
-stamp-h
-stamp-h.in
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.am b/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.am
deleted file mode 100644
index a1ac16486b..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/include/Makefile.am
+++ /dev/null
@@ -1,33 +0,0 @@
-##
-## $Id$
-##
-
-
-include_rtemsdir = $(includedir)/rtems
-include_HEADERS = bsp.h coverhd.h bspopts.h
-include_rtems_HEADERS = ttydrv.h
-
-$(PROJECT_INCLUDE):
- $(mkinstalldirs) $@
-
-$(PROJECT_INCLUDE)/rtems:
- $(mkinstalldirs) $@
-
-$(PROJECT_INCLUDE)/%.h: %.h
- $(INSTALL_DATA) $< $@
-
-coverhd.h: $(top_srcdir)/../../shared/include/coverhd.h
- $(INSTALL_DATA) $< $@
-CLEANFILES = coverhd.h
-
-$(PROJECT_INCLUDE)/rtems/%.h: %.h
- $(INSTALL_DATA) $< $@
-
-TMPINSTALL_FILES = $(PROJECT_INCLUDE) \
- $(include_HEADERS:%=$(PROJECT_INCLUDE)/%) \
- $(PROJECT_INCLUDE)/rtems \
- $(include_rtems_HEADERS:%=$(PROJECT_INCLUDE)/rtems/%)
-
-all-local: $(TMPINSTALL_FILES)
-
-include $(top_srcdir)/../../../../automake/local.am
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/include/bsp.h b/c/src/lib/libbsp/hppa1.1/simhppa/include/bsp.h
deleted file mode 100644
index 65e737d147..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/include/bsp.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* bsp.h
- *
- * This include file contains all HP PA-RISC simulator definitions.
- *
- * COPYRIGHT (c) 1989-1999.
- * On-Line Applications Research Corporation (OAR).
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.com/license/LICENSE.
- *
- * $Id$
- */
-
-#ifndef __PXFL_BSP_h
-#define __PXFL_BSP_h
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <bspopts.h>
-
-#include <rtems.h>
-#include <clockdrv.h>
-#include <rtems/ttydrv.h>
-
-/*
- * confdefs.h overrides for this BSP:
- * - number of termios serial ports (defaults to 1)
- * - Interrupt stack space is not minimum if defined.
- */
-
-/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
-#define CONFIGURE_INTERRUPT_STACK_MEMORY (4 * 1024)
-
-/*
- * Define the time limits for RTEMS Test Suite test durations.
- * Long test and short test duration limits are provided. These
- * values are in seconds and need to be converted to ticks for the
- * application.
- *
- */
-
-#define MAX_LONG_TEST_DURATION 3 /* 3 seconds */
-#define MAX_SHORT_TEST_DURATION 3 /* 3 seconds */
-
-/*
- * Define the interrupt mechanism for Time Test 27
- */
-
-#define MUST_WAIT_FOR_INTERRUPT 1
-
-#define Install_tm27_vector( handler ) \
- ( void ) set_vector( handler, HPPA_INTERRUPT_EXTERNAL_INTERVAL_TIMER, 1 );
-
-#define Cause_tm27_intr() \
- set_itimer( get_itimer() + 20 )
-
-#define Clear_tm27_intr() \
- set_eirr( 0x80000000 )
-
-#define Lower_tm27_intr() \
- { \
- register unsigned32 ignored; \
- HPPA_ASM_SSM( HPPA_PSW_I, ignored ); \
- }
-
-/*
- * Simple spin delay in microsecond units for device drivers.
- * This is very dependent on the clock speed of the target.
- */
-
-extern void Clock_delay(rtems_unsigned32 microseconds);
-#define rtems_bsp_delay( microseconds ) \
- Clock_delay(microseconds);
-
-/*
- * Todo: this should be put somewhere else
- */
-
-#undef CLOCK_DRIVER_TABLE_ENTRY
-#define CLOCK_DRIVER_TABLE_ENTRY { Clock_initialize, NULL, NULL, NULL, NULL, Clock_control }
-rtems_device_driver Clock_control(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void *pargp
-);
-
-/*
- * We printf() to a buffer if multiprocessing, *or* if this is set.
- * ref: src/lib/libbsp/hppa/pxfl/iosupp/consupp.c
- */
-
-extern int use_print_buffer;
-
-#define HPPA_INTERRUPT_EXTERNAL_MPCI HPPA_INTERRUPT_EXTERNAL_10
-
-rtems_isr_entry set_vector(rtems_isr_entry, rtems_vector_number, int);
-
-void bsp_start( void );
-void bsp_cleanup( void );
-
-/* miscellaneous stuff assumed to exist */
-
-extern rtems_configuration_table BSP_Configuration; /* owned by BSP */
-extern rtems_cpu_table Cpu_table; /* owned by BSP */
-
-extern int cpu_number; /* from 0; cpu number in a multi cpu system */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-/* end of include file */
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/include/ttydrv.h b/c/src/lib/libbsp/hppa1.1/simhppa/include/ttydrv.h
deleted file mode 100644
index b20878d99c..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/include/ttydrv.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * $Id$
- */
-
-/*
- * definitions for the tty driver
- */
-
-#ifndef _RTEMS_TTYDRV_H
-#define _RTEMS_TTYDRV_H
-
-rtems_device_driver
-tty_initialize(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void * arg
- );
-
-rtems_device_driver
-tty_open(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void * arg
- );
-
-rtems_device_driver
-tty_close(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void * arg
- );
-
-rtems_device_driver
-tty_control(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void * arg
- );
-
-rtems_device_driver
-tty_read(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void * arg
- );
-
-rtems_device_driver
-tty_write(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void * arg
- );
-
-#endif /* _RTEMS_TTYDRV_H */
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/.cvsignore b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/.cvsignore
deleted file mode 100644
index 282522db03..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-Makefile
-Makefile.in
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.am b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.am
deleted file mode 100644
index 8fb6f45348..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/Makefile.am
+++ /dev/null
@@ -1,31 +0,0 @@
-##
-## $Id$
-##
-
-
-PGM = $(ARCH)/shmsupp.rel
-
-C_FILES = addrconv.c cause_intr.c getcfg.c lock.c mpisr.c
-C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
-
-OBJS = $(C_O_FILES)
-
-include $(top_srcdir)/../../../../automake/compile.am
-include $(top_srcdir)/../../../../automake/lib.am
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-$(PGM): $(OBJS)
- $(make-rel)
-
-if HAS_MP
-all-local: $(ARCH) $(OBJS) $(PGM)
-endif
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-
-EXTRA_DIST = addrconv.c cause_intr.c getcfg.c lock.c mpisr.c README
-
-include $(top_srcdir)/../../../../automake/local.am
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/README b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/README
deleted file mode 100644
index cf60698ca4..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/README
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# $Id$
-#
-
-This directory contains the SHM driver support files for the
-HP PA-RISC simulator for the 72000 processor.
-
-WARNING: The interrupt support in this directory currently will
- only work in a homogeneous system.
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/addrconv.c b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/addrconv.c
deleted file mode 100644
index 56dd1957ee..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/addrconv.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/* Shm_Convert_address
- *
- * No address range conversion is required.
- *
- * Input parameters:
- * address - address to convert
- *
- * Output parameters:
- * returns - converted address
- *
- * COPYRIGHT (c) 1989-1999.
- * On-Line Applications Research Corporation (OAR).
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.com/license/LICENSE.
- *
- * $Id$
- */
-
-#include <bsp.h>
-#include <shm_driver.h>
-
-void *Shm_Convert_address(
- void *address
-)
-{
- return ( address );
-}
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/cause_intr.c b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/cause_intr.c
deleted file mode 100644
index acfb735ce9..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/cause_intr.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/* void Shm_Cause_interrupt_pxfl( node )
- *
- * This routine is the shared memory driver routine which
- * generates interrupts to other CPUs.
- *
- * Input parameters:
- * node - destination of this packet (0 = broadcast)
- *
- * Output parameters: NONE
- *
- * COPYRIGHT (c) 1989-1999.
- * On-Line Applications Research Corporation (OAR).
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.com/license/LICENSE.
- *
- * $Id$
- */
-
-#include <stdio.h>
-
-#include <rtems.h>
-#include <rtems/error.h>
-
-#include <shm_driver.h>
-
-void Shm_Cause_interrupt_pxfl(
- rtems_unsigned32 node
-)
-{
- Shm_Interrupt_information *intr;
- rtems_unsigned32 *u32;
- rtems_unsigned32 value;
-
- intr = &Shm_Interrupt_table[node];
- value = intr->value;
-
- switch ( intr->length ) {
- case NO_INTERRUPT:
- break;
-
- case LONG:
- u32 = (rtems_unsigned32 *)intr->address;
- HPPA_ASM_STWAS( value, 0, u32 );
- break;
- default:
- fprintf( stderr, "Shm_Cause_interrupt_pxfl: Unsupported length!!!\n" );
- }
-}
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/getcfg.c b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/getcfg.c
deleted file mode 100644
index ec1ca0b6f8..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/getcfg.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* void Shm_Get_configuration( localnode, &shmcfg )
- *
- * This routine initializes, if necessary, and returns a pointer
- * to the Shared Memory Configuration Table for the HP PA-RISC
- * simulator.
- *
- * INPUT PARAMETERS:
- * localnode - local node number
- * shmcfg - address of pointer to SHM Config Table
- *
- * OUTPUT PARAMETERS:
- * *shmcfg - pointer to SHM Config Table
- *
- * NOTES: The MP interrupt used is the Runway bus' ability to directly
- * address the control registers of up to four CPUs and cause
- * interrupts on them.
- *
- * The following table illustrates the configuration limitations:
- *
- * BUS MAX
- * MODE ENDIAN NODES
- * ========= ====== =======
- * POLLED BIG 2+
- * INTERRUPT BIG 2..4 (on Runway)
- *
- * COPYRIGHT (c) 1989-1999.
- * On-Line Applications Research Corporation (OAR).
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.com/license/LICENSE.
- *
- * $Id$
- */
-
-#include <bsp.h>
-
-#include <shm_driver.h>
-
-#define INTERRUPT 0 /* can be interrupt or polling */
-#define POLLING 1
-
-#define HPPA_RUNWAY_PROC_HPA_BASE ((void *) 0xFFFA0000)
-
-/* given a processor number, where is its HPA? */
-#define HPPA_RUNWAY_HPA(cpu) \
- ((rtems_unsigned32) (HPPA_RUNWAY_PROC_HPA_BASE + ((cpu) * 0x2000)))
-
-#define HPPA_RUNWAY_REG_IO_EIR_OFFSET 0x000
-
-shm_config_table BSP_shm_cfgtbl;
-
-extern void Shm_Cause_interrupt_pxfl( rtems_unsigned32 node );
-
-void Shm_Get_configuration(
- rtems_unsigned32 localnode,
- shm_config_table **shmcfg
-)
-{
- BSP_shm_cfgtbl.base = (vol_u32 *) 0x44000000;
- BSP_shm_cfgtbl.length = 16 * KILOBYTE;
- BSP_shm_cfgtbl.format = SHM_BIG;
-
- BSP_shm_cfgtbl.cause_intr = Shm_Cause_interrupt_pxfl;
-
-#ifdef NEUTRAL_BIG
- BSP_shm_cfgtbl.convert = NULL_CONVERT;
-#else
- BSP_shm_cfgtbl.convert = CPU_swap_u32;
-#endif
-
-#if ( POLLING == 1 )
- BSP_shm_cfgtbl.poll_intr = POLLED_MODE;
- BSP_shm_cfgtbl.Intr.address = NO_INTERRUPT;
- BSP_shm_cfgtbl.Intr.value = NO_INTERRUPT;
- BSP_shm_cfgtbl.Intr.length = NO_INTERRUPT;
-#else
- BSP_shm_cfgtbl.poll_intr = INTR_MODE;
- BSP_shm_cfgtbl.Intr.address =
- (vol_u32 *) (HPPA_RUNWAY_HPA( localnode - 1) +
- HPPA_RUNWAY_REG_IO_EIR_OFFSET);
- BSP_shm_cfgtbl.Intr.value = HPPA_INTERRUPT_EXTERNAL_MPCI;
- BSP_shm_cfgtbl.Intr.length = LONG;
-#endif
-
- *shmcfg = &BSP_shm_cfgtbl;
-}
-
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/lock.c b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/lock.c
deleted file mode 100644
index ee2f67f108..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/lock.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/* Shared Memory Lock Routines
- *
- * This shared memory locked queue support routine need to be
- * able to lock the specified locked queue. Interrupts are
- * disabled while the queue is locked to prevent preemption
- * and deadlock when two tasks poll for the same lock.
- * previous level.
- *
- * COPYRIGHT (c) 1989-1999.
- * On-Line Applications Research Corporation (OAR).
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.com/license/LICENSE.
- *
- * $Id$
- */
-
-#include <bsp.h>
-#include <shm_driver.h>
-
-/*
- * Shm_Initialize_lock
- *
- * Initialize the lock for the specified locked queue.
- */
-
-void Shm_Initialize_lock(
- Shm_Locked_queue_Control *lq_cb
-)
-{
- lq_cb->lock = LQ_UNLOCKED;
-}
-
-/* Shm_Lock( &lq_cb )
- *
- * This shared memory locked queue support routine locks the
- * specified locked queue. It disables interrupts to prevent
- * a deadlock condition.
- */
-
-void Shm_Lock(
- Shm_Locked_queue_Control *lq_cb
-)
-{
- rtems_unsigned32 isr_level;
- vol_u32 *lockptr = &lq_cb->lock;
- rtems_unsigned32 lock_value;
-
- rtems_interrupt_disable( isr_level );
-
- Shm_isrstat = isr_level;
-
- do {
- HPPA_ASM_LDCWS( 0, 0, lockptr, lock_value );
- } while (lock_value == SHM_LOCK_VALUE);
-}
-
-/*
- * Shm_Unlock
- *
- * Unlock the lock for the specified locked queue.
- */
-
-void Shm_Unlock(
- Shm_Locked_queue_Control *lq_cb
-)
-{
- rtems_unsigned32 isr_level;
-
- lq_cb->lock = SHM_UNLOCK_VALUE;
- isr_level = Shm_isrstat;
- rtems_interrupt_enable( isr_level );
-}
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/mpisr.c b/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/mpisr.c
deleted file mode 100644
index fe4296b2e0..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/shmsupp/mpisr.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Shm_setvec
- *
- * This driver routine sets the SHM interrupt vector to point to the
- * driver's SHM interrupt service routine.
- *
- * Input parameters: NONE
- *
- * Output parameters: NONE
- *
- * COPYRIGHT (c) 1989-1999.
- * On-Line Applications Research Corporation (OAR).
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.com/license/LICENSE.
- *
- * $Id$
- */
-
-#include <bsp.h>
-#include <shm_driver.h>
-
-void Shm_setvec( void )
-{
- set_vector( Shm_isr, HPPA_INTERRUPT_EXTERNAL_MPCI, 1 );
-}
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/start/.cvsignore b/c/src/lib/libbsp/hppa1.1/simhppa/start/.cvsignore
deleted file mode 100644
index 282522db03..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/start/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-Makefile
-Makefile.in
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/start/Makefile.am b/c/src/lib/libbsp/hppa1.1/simhppa/start/Makefile.am
deleted file mode 100644
index 517f8080f8..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/start/Makefile.am
+++ /dev/null
@@ -1,30 +0,0 @@
-##
-## $Id$
-##
-
-S_FILES = start.S
-S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.$(OBJEXT))
-
-OBJS = $(S_O_FILES)
-
-include $(top_srcdir)/../../../../automake/compile.am
-include $(top_srcdir)/../../../../automake/lib.am
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-install-data-local: $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).$(OBJEXT)
- @$(mkinstalldirs) $(DESTDIR)$(bsplibdir)
- $(INSTALL_DATA) $< $(DESTDIR)$(bsplibdir)
-
-$(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).$(OBJEXT): $(ARCH)/start.$(OBJEXT)
- $(INSTALL_DATA) $< $@
-
-TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).$(OBJEXT)
-
-all-local: $(ARCH) $(OBJS) $(TMPINSTALL_FILES)
-
-EXTRA_DIST = start.S
-
-include $(top_srcdir)/../../../../automake/local.am
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/start/start.S b/c/src/lib/libbsp/hppa1.1/simhppa/start/start.S
deleted file mode 100644
index 59e4af5258..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/start/start.S
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * crt0.S -- startup file for hppa on RTEMS
- *
- * $Id$
- */
-
- .COPYRIGHT "crt0.S for hppa"
-
- .DATA
-
-_progname .STRINGZ "simhppa"
-_crt0_argv .WORD _progname, 0
-
-/*
- * Set up the standard spaces (sections) These definitions come
- * from /lib/pcc_prefix.s.
- */
- .TEXT
-
-/*
- * stuff we need that is defined elsewhere.
- */
- .IMPORT boot_card, CODE
- .IMPORT _bss_start, DATA
- .IMPORT _bss_end, DATA
- .IMPORT environ, DATA
-
-/*
- * start -- set things up so the application will run.
- *
- */
- .PROC
- .CALLINFO SAVE_SP, FRAME=48
- .EXPORT $START$,ENTRY
- .EXPORT start,ENTRY
-$START$
-start:
-
-/*
- * Get a stack
- */
-
- ldil L%crt_stack+48,%r30
- ldo R%crt_stack+48(%r30),%r30
-
-/*
- * we need to set %r27 (global data pointer) here
- */
-
- ldil L%$global$,%r27
- ldo R%$global$(%r27),%r27
-
-/*
- * zerobss -- zero out the bss section
- * XXX We don't do this since simulator and boot rom will do this for us.
- */
-#if 0
- ; load the start of bss
- ldil L%_bss_start,%r4
- ldo R%_bss_start(%r4),%r4
-
- ; load the end of bss
- ldil L%_bss_end,%r5
- ldo R%_bss_end(%r5),%r5
-
-
-bssloop
- addi -1,%r5,%r5 ; decrement _bss_end
- stb %r0,0(0,%r5) ; we do this by bytes for now even
- ; though it is slower, it is safer
- combf,= %r4,%r5, bssloop
- nop
-#endif
-
- ldi 1,%ret0
-
-/*
- * Call the "boot_card" routine from the application to get it going.
- * We call it as boot_card(1, argv, 0)
- */
-
- copy %r0, %r24
-
- ldil L%_crt0_argv,%r25
- ldo R%_crt0_argv(%r25),%r25
-
- bl boot_card,%r2
- ldo 1(%r0), %r26
-
- .PROCEND
-/*
- * _exit -- Exit from the application. Normally we cause a user trap
- * to return to the ROM monitor for another run, but with
- * this monitor we can not. Still, "C" wants this symbol, it
- * should be here. Jumping to 0xF0000004 jumps back into the
- * firmware, while writing a 5 to 0xFFFE0030 causes a reset.
- */
-_exit_fallthru
- .PROC
- .CALLINFO
- .ENTRY
-
- ;; This just causes a breakpoint exception
- break 0x0,0x0
- bv,n (%rp)
- nop
- .EXIT
- .PROCEND
-
-/*
- * _sr4export -- support for called functions. (mostly for GDB)
- */
- .EXPORT _sr4export, ENTRY
-_sr4export:
- .PROC
- .CALLINFO
- .ENTRY
-
- ble 0(%sr4,%r22)
- copy %r31,%rp
- ldw -18(%sr0,%sp),%rp
- ldsid (%sr0,%rp),%r1
- mtsp %r1,%sr0
- be,n 0(%sr0,%rp)
- nop
- .EXIT
- .PROCEND
-
-
-#if 0
- .subspa $UNWIND_START$,QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=56
- .export $UNWIND_START
-$UNWIND_START
- .subspa $UNWIND$,QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=64
- .subspa $UNWIND_END$,QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=72
- .export $UNWIND_END
-$UNWIND_END
- .subspa $RECOVER_START$,QUAD=0,ALIGN=4,ACCESS=0x2c,SORT=73
- .export $RECOVER_START
-$RECOVER_START
- .subspa $RECOVER$,QUAD=0,ALIGN=4,ACCESS=0x2c,SORT=80
- .subspa $RECOVER_END$,QUAD=0,ALIGN=4,ACCESS=0x2c,SORT=88
- .export $RECOVER_END
-$RECOVER_END
-#endif
-
-/*
- * Here we set up the standard date sub spaces.
- *
- * Set up some room for a stack. We just grab a chunk of memory.
- * We also setup some space for the global variable space, which
- * must be done using the reserved name "$global$" so "C" code
- * can find it. The stack grows towards the higher addresses.
- */
-
-#if 0
- .subspa $DATA$,QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=16
- .subspa $SHORTDATA$,QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=24
- .subspa $GLOBAL$,QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=40
- .export $global$
-$global$
- .subspa $SHORTBSS$,QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=80,ZERO
- .subspa $BSS$,QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=82,ZERO
-
- .subspa $STACK$,QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=88,ZERO
-#endif
-
- .export crt_stack
-crt_stack
- .comm 0x1000
-
- .end
-
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/startup/.cvsignore b/c/src/lib/libbsp/hppa1.1/simhppa/startup/.cvsignore
deleted file mode 100644
index 282522db03..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/startup/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-Makefile
-Makefile.in
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.am b/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.am
deleted file mode 100644
index 74cb376e6d..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/startup/Makefile.am
+++ /dev/null
@@ -1,41 +0,0 @@
-##
-## $Id$
-##
-
-
-VPATH = @srcdir@:@srcdir@/../../../shared
-
-PGM = $(ARCH)/startup.rel
-
-C_FILES = bspclean.c bsplibc.c bsppost.c bspstart.c bootcard.c main.c sbrk.c \
- setvec.c gnatinstallhandler.c
-C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
-
-OBJS = $(C_O_FILES)
-
-include $(top_srcdir)/../../../../automake/compile.am
-include $(top_srcdir)/../../../../automake/lib.am
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-$(PGM): $(OBJS)
- $(make-rel)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-
-bsplib_DATA = linkcmds
-
-$(PROJECT_RELEASE)/lib/linkcmds: linkcmds
- $(INSTALL_DATA) $< $@
-
-TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/linkcmds
-
-all-local: $(ARCH) $(OBJS) $(PGM) $(TMPINSTALL_FILES)
-
-.PRECIOUS: $(PGM)
-
-EXTRA_DIST = bspclean.c bspstart.c setvec.c
-
-include $(top_srcdir)/../../../../automake/local.am
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/startup/bspclean.c b/c/src/lib/libbsp/hppa1.1/simhppa/startup/bspclean.c
deleted file mode 100644
index 040cbe0137..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/startup/bspclean.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* bsp_cleanup()
- *
- * This routine normally is part of start.s and returns
- * control to a monitor but on the HP PA-RISC simulator
- * we do that directly from main.c.
- *
- * INPUT: NONE
- *
- * OUTPUT: NONE
- *
- * COPYRIGHT (c) 1989-1999.
- * On-Line Applications Research Corporation (OAR).
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.com/license/LICENSE.
- *
- * $Id$
- */
-
-#include <bsp.h>
-
-/*
- * The app has "exited" (called rtems_shutdown_executive)
- */
-
-void bsp_cleanup( void )
-{
- /*
- * Invoke any fatal error extension and "halt"
- * By definition, rtems_fatal_error_occurred does not return.
- */
-
- rtems_fatal_error_occurred(0);
-}
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/startup/bspstart.c b/c/src/lib/libbsp/hppa1.1/simhppa/startup/bspstart.c
deleted file mode 100644
index 4b4c8b98d1..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/startup/bspstart.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * This routine starts the application. It includes application,
- * board, and monitor specific initialization and configuration.
- * The generic CPU dependent initialization has been performed
- * before this routine is invoked.
- *
- * COPYRIGHT (c) 1989-1999.
- * On-Line Applications Research Corporation (OAR).
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.com/license/LICENSE.
- *
- * $Id$
- */
-
-#include <string.h>
-
-#include <bsp.h>
-#include <rtems/libio.h>
-#include <rtems/libcsupport.h>
-
-extern rtems_configuration_table Configuration;
-
-rtems_configuration_table BSP_Configuration;
-rtems_cpu_table Cpu_table;
-
-int cpu_number;
-
-#define WORKSPACE_SIZE (1024 * 1024)
-rtems_unsigned8 MY_WORK_SPACE[ WORKSPACE_SIZE ];
-
-/*
- * Amount to increment itimer by each pass
- * It is a variable instead of a #define to allow the 'looptest'
- * script to bump it without recompiling rtems
- */
-
-rtems_unsigned32 CPU_HPPA_CLICKS_PER_TICK;
-
-#if SIMHPPA_FAST_IDLE
-
-/*
- * Many of the tests are very slow on the simulator because they have
- * have 5 second delays hardwired in.
- * Try to speed those tests up by speeding up the clock when in idle
- */
-
-rtems_extension fast_idle_switch_hook(
- rtems_tcb *current_task,
- rtems_tcb *heir_task
-)
-{
- static rtems_unsigned32 normal_clock = ~0;
- static rtems_unsigned32 fast_clock;
-
- /* init our params on first call */
- if (normal_clock == (rtems_unsigned32) ~0)
- {
- normal_clock = CPU_HPPA_CLICKS_PER_TICK;
- fast_clock = CPU_HPPA_CLICKS_PER_TICK / 0x100;
- if (fast_clock == 0) /* who? me? pathological? never! */
- fast_clock++;
- }
-
- /*
- * Checking for 'name' field of 'IDLE' is not the best/safest,
- * but its the best we could think of at the moment.
- */
-
- if (heir_task == _Thread_Idle)
- CPU_HPPA_CLICKS_PER_TICK = fast_clock;
- else if (current_task == _Thread_Idle)
- CPU_HPPA_CLICKS_PER_TICK = normal_clock;
-}
-
-#endif
-
-/*
- * Use the shared implementations of the following routines
- */
-
-void bsp_postdriver_hook(void);
-void bsp_libc_init( void *, unsigned32, int );
-
-/*
- * Function: bsp_pretasking_hook
- * Created: 95/03/10
- *
- * Description:
- * BSP pretasking hook. Called just before drivers are initialized.
- * Used to setup libc and install any BSP extensions.
- *
- * Notes:
- * Must not use libc (to do io) from here, since drivers are
- * not yet initialized.
- */
-
-void bsp_pretasking_hook(void)
-{
- extern int end;
- rtems_unsigned32 heap_start;
-
- heap_start = (rtems_unsigned32) &end;
- if (heap_start & (CPU_ALIGNMENT-1))
- heap_start = (heap_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
-
- bsp_libc_init((void *) heap_start, 64 * 1024, 0);
-
- /*
- * on MP systems, always use the print buffer
- * instead of the (broken) system calls
- */
-
- if (BSP_Configuration.User_multiprocessing_table)
- use_print_buffer = 1;
-
-#ifdef SIMHPPA_ROM
- use_print_buffer = 1;
-#endif
-
-#if SIMHPPA_FAST_IDLE
- /*
- * Install the fast idle task switch extension
- *
- * on MP systems, might now want to do this; it confuses at least
- * one test (mp06)
- */
-
-#if 0
- if (BSP_Configuration.User_multiprocessing_table == 0)
-#endif
- {
- rtems_extensions_table fast_idle_extension;
- rtems_id extension_id;
- rtems_status_code rc;
-
- memset(&fast_idle_extension, 0, sizeof(fast_idle_extension));
-
- fast_idle_extension.thread_switch = fast_idle_switch_hook;
-
- rc = rtems_extension_create(rtems_build_name('F', 'D', 'L', 'E'),
- &fast_idle_extension, &extension_id);
- if (rc != RTEMS_SUCCESSFUL)
- rtems_fatal_error_occurred(rc);
- }
-#endif
-}
-
-void bsp_start(void)
-{
- /*
- * Set cpu_number to accurately reflect our cpu number
- */
-
-#ifdef hppa7200
- /*
- * Use HPPA_DR0 if supported
- */
- {
- int dr0;
- HPPA_ASM_MFCPU(HPPA_DR0, dr0);
- cpu_number = (dr0 >> 4) & 0x7;
- }
-#else
- if (Configuration.User_multiprocessing_table)
- cpu_number = Configuration.User_multiprocessing_table->node - 1;
- else
- cpu_number = 0;
-#endif
-
- BSP_Configuration.work_space_start = (void *)MY_WORK_SPACE;
- if (BSP_Configuration.work_space_size)
- BSP_Configuration.work_space_size = WORKSPACE_SIZE;
-
- /*
- * Set up our hooks
- * Make sure libc_init is done before drivers init'd so that
- * they can use atexit()
- */
-
- Cpu_table.pretasking_hook = bsp_pretasking_hook; /* init libc, etc. */
- Cpu_table.postdriver_hook = bsp_postdriver_hook; /* register drivers */
-
- /*
- * Don't zero out the workspace. The simulator did it for us.
- */
-
- Cpu_table.do_zero_of_workspace = FALSE;
- Cpu_table.interrupt_stack_size = CONFIGURE_INTERRUPT_STACK_MEMORY;
-
- /*
- * Set this artificially low for the simulator
- */
-
- Cpu_table.itimer_clicks_per_microsecond = 1;
-
-#if 0
- /*
- * Commented by DIVISION INC. External interrupt
- * processing is now divorced from RTEMS for HPPA.
- */
-
- /*
- * Determine the external interrupt processing order
- * the external interrupt handler walks thru this table, in
- * order checking for posted interrupts.
- */
-
- Cpu_table.external_interrupts = 0;
-
- Cpu_table.external_interrupt[ Cpu_table.external_interrupts ] =
- HPPA_INTERRUPT_EXTERNAL_INTERVAL_TIMER;
- Cpu_table.external_interrupts++;
-
- if ( Configuration.User_multiprocessing_table ) {
- Cpu_table.external_interrupt[ Cpu_table.external_interrupts ] =
- HPPA_INTERRUPT_EXTERNAL_10;
- Cpu_table.external_interrupts++;
- }
-#endif
-
-#if SIMHPPA_FAST_IDLE
- /*
- * Add 1 extension for fast idle
- */
-
- BSP_Configuration.maximum_extensions++;
-#endif
-
- /*
- * Set the "clicks per tick" for the simulator
- * used by libcpu/hppa/clock/clock.c to schedule interrupts
- *
- * Set it only if 0 to allow for simulator setting it via script
- * on test startup.
- */
-
- if (CPU_HPPA_CLICKS_PER_TICK == 0)
- CPU_HPPA_CLICKS_PER_TICK = 0x4000;
-}
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/startup/linkcmds b/c/src/lib/libbsp/hppa1.1/simhppa/startup/linkcmds
deleted file mode 100644
index dc2245d1c8..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/startup/linkcmds
+++ /dev/null
@@ -1,46 +0,0 @@
-/* Script for -n: mix text and data on same page */
-OUTPUT_FORMAT("elf32-hppa")
-OUTPUT_ARCH(hppa)
-ENTRY("$START$")
-SEARCH_DIR("/opt/rtems/hppa1.1-rtems/lib");
-SECTIONS
-{
- .text 0x1000 +0x1000:
- {
- __text_start = .;
- CREATE_OBJECT_SYMBOLS
- *(.PARISC.stubs)
- *(.text)
-
- /*
- * Special FreeBSD sysctl sections.
- */
- . = ALIGN (16);
- __start_set_sysctl_set = .;
- *(set_sysctl_*);
- __stop_set_sysctl_set = ABSOLUTE(.);
- *(set_domain_*);
- *(set_pseudo_*);
-
- etext = .;
- _etext = .;
- }
- . = 0x40000000;
- .data :
- {
- . = . + 0x1000 ;
- __data_start = .;
- *(.data)
- CONSTRUCTORS
- edata = .;
- _edata = .;
- }
- . = 0x40000000 + SIZEOF(.data);
- .bss :
- {
- *(.bss)
- *(COMMON)
- end = . ;
- _end = . ;
- }
-}
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/startup/setvec.c b/c/src/lib/libbsp/hppa1.1/simhppa/startup/setvec.c
deleted file mode 100644
index 2ad83dafda..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/startup/setvec.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/* set_vector
- *
- * This routine installs an interrupt vector on the HP PA-RISC simulator.
- *
- * INPUT:
- * handler - interrupt handler entry point
- * vector - vector number
- * type - 0 indicates raw hardware connect
- * 1 indicates RTEMS interrupt connect
- *
- * NOTE 'type' is ignored on hppa; all interrupts are owned by RTEMS
- *
- * RETURNS:
- * address of previous interrupt handler
- *
- * COPYRIGHT (c) 1989-1999.
- * On-Line Applications Research Corporation (OAR).
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.com/license/LICENSE.
- *
- * $Id$
- */
-
-#include <bsp.h>
-
-/*
- * Install an interrupt handler in the right place
- * given its vector number from cpu/hppa.h
- * There are 2 places an interrupt can be installed
- * _ISR_Vector_table
- * bsp interrupt XXX: nyi
- *
- * We decide which based on the vector number
- */
-
-rtems_isr_entry
-set_vector( /* returns old vector */
- rtems_isr_entry handler, /* isr routine */
- rtems_vector_number vector, /* vector number */
- int type /* RTEMS or RAW intr */
-)
-{
- rtems_isr_entry previous_isr;
-
- /* is it an on chip interrupt? */
- /* XXX this should say CPU_INTERRUPT_NUMBER_OF_VECTORS */
- if (vector < HPPA_INTERRUPT_MAX)
- {
- rtems_interrupt_catch(handler, vector, &previous_isr);
- }
-#if 0 /* XXX */
- else if ((vector >= HPPA_INTERRUPT_BSP_BASE) &&
- (vector < (HPPA_INTERRUPT_BSP_BASE + HPPA_BSP_INTERRUPTS)))
- {
- pxfl_interrupt_install(handler,
- vector - HPPA_INTERRUPT_BSP_BASE,
- (rtems_isr_entry *) &previous_isr);
- }
-#endif
-
- return previous_isr;
-}
-
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/times b/c/src/lib/libbsp/hppa1.1/simhppa/times
deleted file mode 100644
index 272488a8c0..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/times
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Timing Test Suite Results for the PA-RISC Simulator.
-#
-# $Id$
-#
-
-Times are not available for the PA-RISC Simulator.
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/.cvsignore b/c/src/lib/libbsp/hppa1.1/simhppa/tools/.cvsignore
deleted file mode 100644
index d79c64fcb4..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/.cvsignore
+++ /dev/null
@@ -1,18 +0,0 @@
-aclocal.m4
-autom4te*.cache
-config.cache
-config.guess
-config.h
-config.h.in
-config.log
-config.status
-config.sub
-configure
-depcomp
-install-sh
-Makefile
-Makefile.in
-missing
-mkinstalldirs
-stamp-h
-stamp-h.in
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/ChangeLog b/c/src/lib/libbsp/hppa1.1/simhppa/tools/ChangeLog
deleted file mode 100644
index 7a85475959..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/ChangeLog
+++ /dev/null
@@ -1,71 +0,0 @@
-2003-08-18 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: Reflect having moved aclocal/.
-
-2003-08-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: Reflect having moved automake/.
-
-2003-08-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: Use rtems-bugs@rtems.com as bug report email address.
-
-2003-03-06 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: Remove AC_CONFIG_AUX_DIR.
-
-2003-02-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
-
-2003-02-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: AC_PREREQ(2.57).
-
-2002-10-21 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * .cvsignore: Reformat.
- Add autom4te*cache.
- Remove autom4te.cache.
-
-2002-04-01 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac: Remove AC_EXEEXT (obsolete).
-
-2002-03-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * configure.ac:
- AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
- AM_INIT_AUTOMAKE([no-define foreign 1.6]).
- * Makefile.am: Remove AUTOMAKE_OPTIONS.
-
-2001-10-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * .cvsignore: Add autom4te.cache for autoconf > 2.52.
- * configure.in: Remove.
- * configure.ac: New file, generated from configure.in by autoupdate.
-
-2001-02-02 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * .cvsignore: Add stamp-h
-
-2001-01-24 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * config.h.in: Automatically generated. Remove from CVS.
-
-2000-11-09 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
-
-2000-11-02 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.
-
-2000-10-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
- * Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
- Switch to GNU canonicalization.
-
-2000-08-10 Joel Sherrill <joel@OARcorp.com>
-
- * ChangeLog: New file.
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.am b/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.am
deleted file mode 100644
index a5caaa371f..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.am
+++ /dev/null
@@ -1,16 +0,0 @@
-##
-## $Id$
-##
-
-ACLOCAL_AMFLAGS = -I ../../../../../aclocal
-
-noinst_PROGRAMS = print_dump
-
-print_dump_SOURCES = print_dump.c
-
-## HACK: install to build-tree
-install-exec-local: $(PROGRAMS)
- $(mkinstalldirs) $(PROJECT_ROOT)/simhppa/bin
- $(INSTALL_PROGRAM) print_dump $(PROJECT_ROOT)/simhppa/bin
-
-include $(top_srcdir)/../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure.ac b/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure.ac
deleted file mode 100644
index b60a2a31f0..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/configure.ac
+++ /dev/null
@@ -1,25 +0,0 @@
-## Process this file with autoconf to produce a configure script.
-##
-## $Id$
-
-AC_PREREQ(2.57)
-AC_INIT([rtems-c-src-lib-libbsp-hppa1.1-simhppa-tools],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
-AC_CONFIG_SRCDIR([print_dump.c])
-RTEMS_TOP(../../../../../../..)
-
-RTEMS_CANONICAL_TARGET_CPU
-
-AM_INIT_AUTOMAKE([no-define foreign 1.7.2])
-AM_MAINTAINER_MODE
-
-AC_PROG_CC
-
-AC_CHECK_FUNCS(strerror)
-AM_CONFIG_HEADER(config.h)
-
-RTEMS_PROJECT_ROOT
-RTEMS_TOOLPATHS
-
-# Explicitly list all Makefiles here
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tools/print_dump.c b/c/src/lib/libbsp/hppa1.1/simhppa/tools/print_dump.c
deleted file mode 100644
index a9101bed9b..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/tools/print_dump.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * print_dump
- *
- * COPYRIGHT (c) 1994 by Division Incorporated
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.com/license/LICENSE.
- *
- * $Id$
- */
-
-#define GETOPTARGS "v"
-
-char *USAGE = "\
-usage: print_dump [ -v ] \n\
- -v -- verbose\n\
- Reads HP simulator 'memdump' output of 'print_buffer' structure
- on stdin. Dumps it out in vanilla ASCII.
-";
-
-#include <stdio.h>
-#include <fcntl.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <memory.h>
-#include <stdarg.h>
-
-#include "config.h"
-
-#ifndef VMS
-#ifndef HAVE_STRERROR
-#if defined(__linux__) && (__GLIBC__ < 2)
-extern char *sys_errlist[];
-#endif
-
-#define strerror( _err ) \
- ((_err) < sys_nerr) ? sys_errlist [(_err)] : "unknown error"
-
-#else /* HAVE_STRERROR */
-char *strerror ();
-#endif
-#else /* VMS */
-char *strerror (int,...);
-#endif
-
-#define Failed(x) (((int) (x)) == -1)
-#define TRUE 1
-#define FALSE 0
-#define STREQ(a,b) (strcmp(a,b) == 0)
-#define NUMELEMS(arr) (sizeof(arr) / sizeof(arr[0]))
-
-/*
- * Definitions for unsigned "ints"; especially for use in data structures
- * that will be shared among (potentially) different cpu's (we punt on
- * byte ordering problems tho)
- */
-
-typedef unsigned char u8;
-typedef unsigned short u16;
-typedef unsigned int u32;
-
-typedef union uval {
- u8 uv_chars[4];
- u16 uv_words[2];
- u32 uv_long;
- void *uv_ptr[sizeof(long) / sizeof(void *)];
-} uval_t;
-
-
-/*
- * vars controlled by command line options
- */
-
-int verbose = FALSE; /* be verbose */
-
-extern char *optarg; /* getopt(3) control vars */
-extern int optind, opterr;
-extern int errno;
-
-char *progname; /* for error() */
-
-void error(int errn, ...);
-
-#define ERR_ERRNO (1<<((sizeof(int) * 8) - 2)) /* hi bit; use 'errno' */
-#define ERR_FATAL (ERR_ERRNO / 2) /* error is fatal; no return */
-#define ERR_ABORT (ERR_ERRNO / 4) /* error is fatal; abort */
-#define ERR_MASK (ERR_ERRNO | ERR_FATAL | ERR_ABORT) /* all */
-
-int process(void);
-void prchar(unsigned int ch);
-
-
-int
-main(int argc, char **argv, char **env)
-{
- register int c;
- int showusage = FALSE; /* usage error? */
-
- /*
- * figure out invocation leaf-name
- */
-
- if ((progname = strrchr(argv[0], '/')) == (char *) NULL)
- progname = argv[0];
- else
- progname++;
-
- argv[0] = progname; /* for getopt err reporting */
-
- /*
- * Check options and arguments.
- */
-
- opterr = 0; /* we'll report all errors */
- while ((c = getopt(argc, argv, GETOPTARGS)) != EOF)
- switch (c)
- {
- case 'v': /* toggle verbose */
- verbose = ! verbose;
- break;
-
- case '?':
- showusage = TRUE;
- }
-
- if (showusage)
- {
- (void) fprintf(stderr, "%s", USAGE);
- exit(1);
- }
-
- return process();
-}
-
-
-/*
- * process(arg)
- *
- * Input looks like this
- *
- * Starting address: 00000001.480035a0
- * -----------------------------------
-
-+0000 / 0d0a0d0a 2a2a2a20 53454d20 54455354 202d2d20 4e4f4445 2032202a 2a2a0d0a
-+0020 / 73703a20 30783433 30303030 31300d0a 30783438 30613161 38383a20 676f7420
- ....
-+0b40 / xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
-
- *
- * The 'xxxxxxxxx' shows up if the page has not been allocated.
- */
-
-int
-process(void)
-{
- uval_t b[8];
- u32 ignore;
- char *p;
- int i;
- int failed_once;
-
- char line[1024];
-
-#define PRINT_BUFFER_SIZE (16 * 1024)
- struct {
- int index;
- int size;
- u8 buffer[PRINT_BUFFER_SIZE];
- } print_buffer;
-
- /* we stuff the data into print_buffer using memcpy() */
- p = (char *) &print_buffer;
-
- failed_once = 0;
-
- while (gets(line))
- {
- char *cp;
-
- /* hack; deal with the 'xxxxxxxx' problem noted above */
- for (cp=line; *cp; cp++)
- if (*cp == 'x')
- *cp = '0';
-
- if (*line != '+')
- continue;
- if (sscanf(line, "+%x / %x %x %x %x %x %x %x %x\n",
- &ignore,
- &b[0].uv_long,
- &b[1].uv_long,
- &b[2].uv_long,
- &b[3].uv_long,
- &b[4].uv_long,
- &b[5].uv_long,
- &b[6].uv_long,
- &b[7].uv_long) != 9)
- {
- if (failed_once)
- error(ERR_FATAL, "2nd format problem; giving up");
- error(0, "format problem in line: `%s`", line);
- failed_once = 1;
- }
-
- memcpy((void *) p, (void *) b, sizeof(b));
- p += sizeof(b);
- }
-
- if (verbose)
- printf("buffer size: %d\n", print_buffer.size);
-
- if (print_buffer.size < 0)
- error(ERR_FATAL, "size is too small");
-
- if (print_buffer.size != sizeof(print_buffer.buffer))
- {
- error(ERR_FATAL, "buffer size mismatch, expected %d",
- sizeof(print_buffer.buffer));
- /* XXX we really should just dynamically allocate the buffer */
- }
-
- i = print_buffer.index + 1;
- while (i != print_buffer.index)
- {
- unsigned int c;
- c = print_buffer.buffer[i++];
- if (c && (c != '\r'))
- prchar(c);
- i %= print_buffer.size;
- }
- printf("\n");
- return 0;
-}
-
-/* de-controlify */
-char *de_control[] = {
- "^@", "^A", "^B", "^C", "^D", "^E", "^F", "^G", "^H", "^I", "^J", "^K",
- "^L", "^M", "^N", "^O", "^P", "^Q", "^R", "^S", "^T", "^U", "^V", "^W",
- "^X", "^Y", "^Z", "^[", "^\\", "^]", "^~", "^_",
- " ", "!", "\"", "#", "$", "%", "&", "'", "(", ")", "*", "+", ",", "-",
- ".", "/", "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", ":", ";",
- "<", "=", ">", "?", "@", "A", "B", "C", "D", "E", "F", "G", "H", "I",
- "J", "K", "L", "M", "N", "O", "P", "Q", "R", "S", "T", "U", "V", "W",
- "X", "Y", "Z", "[", "\\", "]", "^", "_", "`", "a", "b", "c", "d", "e",
- "f", "g", "h", "i", "j", "k", "l", "m", "n", "o", "p", "q", "r", "s",
- "t", "u", "v", "w", "x", "y", "z", "{", "|", "}", "~", "^?",
- "M-^@", "M-^A", "M-^B", "M-^C", "M-^D", "M-^E", "M-^F", "M-^G",
- "M-^H", "M-^I", "M-^J", "M-^K", "M-^L", "M-^M", "M-^N", "M-^O",
- "M-^P", "M-^Q", "M-^R", "M-^S", "M-^T", "M-^U", "M-^V", "M-^W",
- "M-^X", "M-^Y", "M-^Z", "M-^[", "M-^\\", "M-^]", "M-^~", "M-^_",
- "M- ", "M-!", "M-\"", "M-#", "M-$", "M-%", "M-&", "M-'",
- "M-(", "M-)", "M-*", "M-+", "M-,", "M--", "M-.", "M-/",
- "M-0", "M-1", "M-2", "M-3", "M-4", "M-5", "M-6", "M-7",
- "M-8", "M-9", "M-:", "M-;", "M-<", "M-=", "M->", "M-?",
- "M-@", "M-A", "M-B", "M-C", "M-D", "M-E", "M-F", "M-G",
- "M-H", "M-I", "M-J", "M-K", "M-L", "M-M", "M-N", "M-O",
- "M-P", "M-Q", "M-R", "M-S", "M-T", "M-U", "M-V", "M-W",
- "M-X", "M-Y", "M-Z", "M-[", "M-\\", "M-]", "M-^", "M-_",
- "M-`", "M-a", "M-b", "M-c", "M-d", "M-e", "M-f", "M-g",
- "M-h", "M-i", "M-j", "M-k", "M-l", "M-m", "M-n", "M-o",
- "M-p", "M-q", "M-r", "M-s", "M-t", "M-u", "M-v", "M-w",
- "M-x", "M-y", "M-z", "M-{", "M-|", "M-}", "M-~", "M-^?"
-};
-
-/*
- * prchar(ch); print ch in a readable format, ie ^X or X or ~^X or DEL, etc.
- */
-
-void
-prchar(unsigned int ch)
-{
- if (isprint(ch) || isspace(ch))
- putchar(ch);
- else
- printf("%s", de_control[ch]);
-}
-
-
-/*
- * error(errn, arglist)
- * report an error to stderr using printf(3) conventions.
- * Any output is preceded by '<progname>: '
- *
- * Uses ERR_EXIT bit to request exit(errn)
- * ERR_ABORT to request abort()
- * ERR_ERRNO to indicate use of errno instead of argument.
- *
- * If resulting 'errn' is non-zero, it is assumed to be an 'errno' and its
- * associated error message is appended to the output.
- */
-
-/*VARARGS*/
-
-void
-error(int error_flag, ...)
-{
- va_list arglist;
- register char *format;
- int local_errno;
-
- extern int errno;
-
- (void) fflush(stdout); /* in case stdout/stderr same */
-
- local_errno = error_flag & ~ERR_MASK;
- if (error_flag & ERR_ERRNO) /* use errno? */
- local_errno = errno;
-
- va_start(arglist, error_flag);
- format = va_arg(arglist, char *);
- (void) fprintf(stderr, "%s: ", progname);
- (void) vfprintf(stderr, format, arglist);
- va_end(arglist);
-
- if (local_errno)
- (void) fprintf(stderr, " (%s)\n", strerror(local_errno));
- else
- (void) fprintf(stderr, "\n");
-
- (void) fflush(stderr);
-
- if (error_flag & (ERR_FATAL | ERR_ABORT))
- {
- if (error_flag & ERR_FATAL)
- {
- error(0, local_errno ? "fatal error, exiting" : "exiting");
- exit(local_errno);
- }
- else
- {
- error(0, "fatal error, aborting");
- abort();
- }
- }
-}
-
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tty/.cvsignore b/c/src/lib/libbsp/hppa1.1/simhppa/tty/.cvsignore
deleted file mode 100644
index 282522db03..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/tty/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-Makefile
-Makefile.in
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.am b/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.am
deleted file mode 100644
index ee93e6e351..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/tty/Makefile.am
+++ /dev/null
@@ -1,31 +0,0 @@
-##
-## $Id$
-##
-
-
-PGM = $(ARCH)/tty.rel
-
-C_FILES = tty.c
-C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
-
-OBJS = $(C_O_FILES)
-
-include $(top_srcdir)/../../../../automake/compile.am
-include $(top_srcdir)/../../../../automake/lib.am
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-$(PGM): $(OBJS)
- $(make-rel)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-
-all-local: $(ARCH) $(OBJS) $(PGM)
-
-.PRECIOUS: $(PGM)
-
-EXTRA_DIST = tty.c
-
-include $(top_srcdir)/../../../../automake/local.am
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/tty/tty.c b/c/src/lib/libbsp/hppa1.1/simhppa/tty/tty.c
deleted file mode 100644
index c00c2d516e..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/tty/tty.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Tty IO Driver
- * This is a "libio" driver based on libc/support/generic/libio interface
- * which is on top of the RTEMS IO manager.
- *
- * These provide UNIX-like read and write calls for the C library.
- *
- * COPYRIGHT (c) 1994 by Division Incorporated
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.com/license/LICENSE.
- *
- * $Id$
- */
-
-#include <bsp.h>
-#include <rtems/libio.h>
-
-#include <errno.h>
-
-#define PRINT_BUFFER_SIZE (16 * 1024)
-
-/*
- * NOTE: this structure is dumplicated in print_dump.c utility
- */
-
-struct {
- int index;
- int size;
- char buffer[PRINT_BUFFER_SIZE];
-} print_buffer;
-
-/* always use printf buffer if non-zero */
-int use_print_buffer;
-
-static int host_read_syscall(int fd, char *buffer, int count);
-static int host_write_syscall(int fd, char *buffer, int count);
-
-rtems_device_driver
-console_initialize(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void * arg
- )
-{
- rtems_status_code status;
-
- status = rtems_io_register_name("/dev/tty00",
- major,
- (rtems_device_minor_number) 0);
- if (status != RTEMS_SUCCESSFUL)
- rtems_fatal_error_occurred(status);
-
- return RTEMS_SUCCESSFUL;
-}
-
-rtems_device_driver
-console_open(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void * arg
- )
-{
- return RTEMS_SUCCESSFUL;
-}
-
-rtems_device_driver
-console_close(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void * arg
- )
-{
- return RTEMS_SUCCESSFUL;
-}
-
-rtems_device_driver
-console_control(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void * arg
- )
-{
- return RTEMS_SUCCESSFUL;
-}
-
-
-rtems_device_driver
-console_read(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void * arg
- )
-{
- rtems_libio_rw_args_t *rw_args;
- int count = 0;
-
- rw_args = (rtems_libio_rw_args_t *) arg;
-
- /*
- * If we are printing to a buffer, then just return newline on all
- * read's. If we return 0 bytes read, then the pause() calls in
- * the RTEMS tests get hosed (pause() does a gets())
- */
-
- if ( use_print_buffer )
- {
- *rw_args->buffer = '\n';
- count = 1;
- }
- else
- {
- count = host_read_syscall(0, rw_args->buffer, rw_args->count);
- }
-
- if (count >= 0)
- {
- rw_args->bytes_moved = count;
- return RTEMS_SUCCESSFUL;
- }
- return RTEMS_UNSATISFIED;
-}
-
-rtems_device_driver
-console_write(
- rtems_device_major_number major,
- rtems_device_minor_number minor,
- void * arg
- )
-{
- unsigned32 level;
- rtems_libio_rw_args_t *rw_args;
- int count = 0;
- int fd = 1; /* XXX fixme; needs to be saved in iop */
-
- rw_args = (rtems_libio_rw_args_t *) arg;
-
- /*
- * HACK alert
- *
- * Some of the simulators have real problems when multi cpu and
- * using the system calls. Until this is fixed, if we are multi
- * cpu then we write to a printf buffer
- */
-
- if ( use_print_buffer )
- {
- /* save size in memory for dumper */
- if (print_buffer.size == 0)
- print_buffer.size = PRINT_BUFFER_SIZE;
-
- while (rw_args->count-- > 0)
- {
- rtems_interrupt_disable(level);
- print_buffer.buffer[print_buffer.index] = *rw_args->buffer++;
- print_buffer.index++;
- print_buffer.index &= (PRINT_BUFFER_SIZE - 1);
- print_buffer.buffer[print_buffer.index] = 0;
- rtems_interrupt_enable(level);
- count++;
- }
- }
- else
- {
-#if 1
- /*
- * if on a multi cpu system and writing to stdout, redirect to stderr
- * so we can keep them separate
- */
-
- if ((cpu_number == 1) && (fd == 1))
- fd = 2;
-#endif
- count = host_write_syscall(fd, rw_args->buffer, rw_args->count);
- }
-
- if (count >= 0)
- {
- rw_args->bytes_moved = count;
- return RTEMS_SUCCESSFUL;
- }
- return RTEMS_UNSATISFIED;
-}
-
-
-/*
- * Host system call hack.
- * This little trick gets all the args in the right registers
- * for the system call and permits simpler inline asm.
- * Since this whole thing (syscalls under simulator) is a hack,
- * this little bit more is not going to hurt anything.
- */
-
-
-static int
-host_read_syscall(
- int fd,
- char *buffer,
- int count
- )
-{
- unsigned32 level;
- int rc;
-
- rtems_interrupt_disable(level);
-
- /* This is an HPUX system call, with return value copied out */
- asm volatile (" stw %%r19,-28(0,%%r30)\n\
- ldil L%%0xc0000000,%%r1\n\
- ble 4(7,%%r1)\n\
- ldi 3,%%r22\n\
- ldw -28(0,%%r30),%%r19\n\
- copy %%r28, %0"
- : "=r" (rc)
- : );
-
- rtems_interrupt_enable(level);
- return rc;
-}
-
-static int
-host_write_syscall(
- int fd,
- char *buffer,
- int count
- )
-{
- unsigned32 level;
- int rc;
-
- rtems_interrupt_disable(level);
-
- /* This is an HPUX system call, with return value copied out */
- asm volatile (" stw %%r19,-28(0,%%r30)\n\
- ldil L%%0xc0000000,%%r1\n\
- ble 4(7,%%r1)\n\
- ldi 4,%%r22\n\
- ldw -28(0,%%r30),%%r19\n\
- copy %%r28, %0"
- : "=r" (rc)
- : );
-
- rtems_interrupt_enable(level);
- return rc;
-}
-
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/.cvsignore b/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/.cvsignore
deleted file mode 100644
index 282522db03..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-Makefile
-Makefile.in
diff --git a/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.am b/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.am
deleted file mode 100644
index 9f2e253905..0000000000
--- a/c/src/lib/libbsp/hppa1.1/simhppa/wrapup/Makefile.am
+++ /dev/null
@@ -1,37 +0,0 @@
-##
-## $Id$
-##
-
-# pieces to pick up out of libcpu/hppa
-CPU_FILES = clock milli timer
-
-if HAS_MP
-GENERIC_MP_REL_FILES = shmdr
-endif
-GENERIC_FILES = $(GENERIC_MP_REL_FILES)
-
-if HAS_MP
-BSP_MP_O_FILES = shmsupp
-endif
-BSP_FILES = startup tty $(BSP_MP_O_FILES)
-
-include $(top_srcdir)/../../../../automake/compile.am
-include $(top_srcdir)/../../../../automake/lib.am
-
-# bummer; have to use $foreach since % pattern subst rules only replace 1x
-OBJS = $(foreach piece, $(BSP_FILES), $(wildcard ../$(piece)/$(ARCH)/*.$(OBJEXT))) \
- $(foreach piece, $(CPU_FILES), ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) \
- $(foreach piece, $(GENERIC_FILES), ../../../$(piece)/$(ARCH)/$(piece).rel)
-
-LIB = $(ARCH)/libbsp.a
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-$(LIB): $(OBJS)
- $(make-library)
-
-all-local: $(ARCH) $(LIB)
-
-include $(top_srcdir)/../../../../automake/local.am