Patch rtems-rc-19991203-7.diff from Ralf Corsepius <corsepiu@faw.uni-ulm.de>

    which adds partial automake support to libcpu/<cpu>/*.

    Until now I have only implemented full automake support for the sh (my
    demonstration example :) and the i386 (inevitiable for structural
    reasons of this subdirectory). For all other cpus only their toplevel
    directories (exception: powerpc), include subdirectories and a few
    selected subdirectories have been converted to automake.
    I did this on purpose, because add automake support to each subdirectory
    requires individual adaptations which to be tested individually.

    Additionally the weirdnesses of the powerpc subdirectories hit again,
    esp. some powerpc cpu-models

    * install files to $(PROJECT_INCLUDE)/<cpu-model>/ while others install
      them to  $(PROJECT_INCLUDE)/
    * the scheme used to configure libcpu/powerpc/ is difficult to implement
      using automake, therefore this subdirectory still is configured by
      autoconf (The one out of an unlimited set selection scheme hits again
      :), though powerpc/*/* subdirectories already apply automake.

    The patch also reveils structural weaknesses in RTEMS:

    E.g. There seem to exist at least 5 different general schemes:

    * Not using libcpu at all (eg. i960)
    * Strictly tree-style a libcpu/<cpu-variant>/* (eg. m68k, sh)
    * Flat libcpu directory layout with cpu-variants merged into sources or
      not destinguishing cpu-variants (i386)
    * Not supporting variants with deep source tree (sparc, hppa, mips64orion)
    * Woven directory structure with shared directories (powerpc)

    I regret having to say this, but from my POV this means, that there
    doesn't exist a general implementation scheme for libcpu at all.

    To apply:

        rm -rf ./c/src/lib/libcpu/i386/wrapup
        rm -rf ./c/src/lib/libcpu/mips64orion/include
        rm -rf ./c/src/lib/libcpu/powerpc/ppc403/include
        patch -p1 < rtems-rc-19991203-7.diff
        ./bootstrap

53 files changed, 6212 insertions, 750 deletions

diff --git a/c/src/lib/libcpu/configure.in b/c/src/lib/libcpu/configure.in
index 1db1d37d0b..616bea9571 100644
--- a/c/src/lib/libcpu/configure.in
+++ b/c/src/lib/libcpu/configure.in
@@ -31,7 +31,12 @@ RTEMS_CANONICALIZE_TOOLS
 RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP)
 
 # find all the CPU dependent library Makefiles
-RTEMS_CHECK_MAKEFILE($RTEMS_CPU)
+if test -f $srcdir/$RTEMS_CPU/configure.in; then
+  cfg_subdirs="$RTEMS_CPU"
+else
+  RTEMS_CHECK_MAKEFILE($RTEMS_CPU)
+fi
+AC_CONFIG_SUBDIRS($cfg_subdirs)
 
 AC_OUTPUT( 
 Makefile
diff --git a/c/src/lib/libcpu/hppa1.1/Makefile.in b/c/src/lib/libcpu/hppa1.1/Makefile.in
index 8b73347802..2be89cde29 100644
--- a/c/src/lib/libcpu/hppa1.1/Makefile.in
+++ b/c/src/lib/libcpu/hppa1.1/Makefile.in
@@ -1,25 +1,397 @@
-#
-#  $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = hppa1.1
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
 
-VPATH = @srcdir@
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/directory.cfg
+top_builddir = .
 
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
 INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
+
+AUTOMAKE_OPTIONS = foreign 1.4
+ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
 
 SUBDIRS = include milli clock timer semaphore
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/subdirs.am $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in 
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive  \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+	  rev="$$subdir $$rev"; \
+	  test "$$subdir" = "." && dot_seen=yes; \
+	done; \
+	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+   if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+   fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+	cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist
+	-rm -rf $(distdir)
+	@banner="$(distdir).tar.gz is ready for distribution"; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+distdir: $(DISTFILES)
+	-rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    chmod 777 $(distdir)/$$subdir; \
+	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile
+all-redirect: all-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am:  clean-tags clean-generic mostlyclean-am
+
+clean: clean-recursive
+
+distclean-am:  distclean-tags distclean-generic clean-am
+
+distclean: distclean-recursive
+	-rm -f config.status
+
+maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
+		distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f config.status
+
+.PHONY: install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+depend-recursive \
+preinstall-recursive \
+debug-recursive \
+profile-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+debug: debug-recursive
+.PHONY: debug-recursive
+
+profile: profile-recursive
+.PHONY: profile-recursive
+
+preinstall: preinstall-recursive
+.PHONY: preinstall-recursive
+
+depend: depend-recursive
+.PHONY: depend-recursive
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/hppa1.1/clock/Makefile.in b/c/src/lib/libcpu/hppa1.1/clock/Makefile.in
index 67e5e01bfc..1db187bcfc 100644
--- a/c/src/lib/libcpu/hppa1.1/clock/Makefile.in
+++ b/c/src/lib/libcpu/hppa1.1/clock/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = hppa1.1/clock
+top_builddir = ..
+subdir = clock
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/hppa1.1/include/Makefile.in b/c/src/lib/libcpu/hppa1.1/include/Makefile.in
index 24734a0bc5..cacc0832f8 100644
--- a/c/src/lib/libcpu/hppa1.1/include/Makefile.in
+++ b/c/src/lib/libcpu/hppa1.1/include/Makefile.in
@@ -1,45 +1,259 @@
-#
-# $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
 
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = hppa1.1/include
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+SHELL = @SHELL@
 
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
 VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-H_FILES = $(srcdir)/runway.h $(srcdir)/semaphore.h
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
 
-SRCS = $(H_FILES)
+DESTDIR =
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
 
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
 
-INSTALLDIRS = $(PROJECT_INCLUDE)
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
 
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
+AUTOMAKE_OPTIONS = foreign 1.4
 
-all: install
+H_FILES = runway.h semaphore.h
+noinst_HEADERS = $(H_FILES)
 
 # NOTE: Unlike other CPUS, we install into a subdirectory to avoid 
 #       file name conflicts
 
-install: 
-	$(mkinstalldirs) $(PROJECT_INCLUDE)/hppa1.1 
-	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/hppa1.1
+TMPINSTALL_FILES =  $(PROJECT_INCLUDE)/hppa1.1 $(H_FILES:%=$(PROJECT_INCLUDE)/hppa1.1/%)
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+HEADERS =  $(noinst_HEADERS)
+
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign include/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = include
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign include/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile $(HEADERS) all-local
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-tags clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-tags distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
+		distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags mostlyclean-tags distclean-tags clean-tags \
+maintainer-clean-tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-local all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+$(PROJECT_INCLUDE)/hppa1.1:
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/hppa1.1/%.h: %.h
+	$(INSTALL_DATA) $@ $<
+
+all-local: $(TMPINSTALL_FILES)
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/hppa1.1/milli/Makefile.in b/c/src/lib/libcpu/hppa1.1/milli/Makefile.in
index f3df9c6b07..5e9e9db7c8 100644
--- a/c/src/lib/libcpu/hppa1.1/milli/Makefile.in
+++ b/c/src/lib/libcpu/hppa1.1/milli/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = hppa1.1/milli
+top_builddir = ..
+subdir = milli
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/hppa1.1/semaphore/Makefile.in b/c/src/lib/libcpu/hppa1.1/semaphore/Makefile.in
index 78df5df270..6b211b12cd 100644
--- a/c/src/lib/libcpu/hppa1.1/semaphore/Makefile.in
+++ b/c/src/lib/libcpu/hppa1.1/semaphore/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = hppa1.1/semaphore
+top_builddir = ..
+subdir = semaphore
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/hppa1.1/timer/Makefile.in b/c/src/lib/libcpu/hppa1.1/timer/Makefile.in
index fadc889d54..bd5e86131b 100644
--- a/c/src/lib/libcpu/hppa1.1/timer/Makefile.in
+++ b/c/src/lib/libcpu/hppa1.1/timer/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = hppa1.1/timer
+top_builddir = ..
+subdir = timer
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/i386/Makefile.in b/c/src/lib/libcpu/i386/Makefile.in
index ae2a840897..ba8988d12f 100644
--- a/c/src/lib/libcpu/i386/Makefile.in
+++ b/c/src/lib/libcpu/i386/Makefile.in
@@ -1,81 +1,340 @@
-#
-#  $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = i386
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-RTEMS_ROOT = @RTEMS_ROOT@
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
 PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-VPATH = @srcdir@
+AUTOMAKE_OPTIONS = foreign 1.4
+ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
+
+LIBNAME = libcpu
+LIB = $(ARCH)/$(LIBNAME).a
 
 # C source names, if any, go here -- minus the .c
-C_PIECES = cpu displayCpu page
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
+C_FILES = cpu.c displayCpu.c page.c
+C_O_FILES = $(C_FILES:%.c=${ARCH}/%.o)
 
-H_FILES = $(srcdir)/cpu.h $(srcdir)/registers.h $(srcdir)/cpuModel.h
+H_FILES = cpu.h registers.h cpuModel.h
+noinst_HEADERS = $(H_FILES)
 
 # Assembly source names, if any, go here -- minus the .s
-S_PIECES = cpu_asm cpuModel
-S_FILES = $(S_PIECES:%=%.S)
+S_FILES = cpu_asm.S cpuModel.S
 S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-SRCS = $(C_FILES) $(H_FILES)
 OBJS = $(C_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/lib.cfg
+TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib $(PROJECT_RELEASE)/lib/$(LIBNAME)$(LIB_VARIANT).a
 
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
 
-INSTALLDIRS = $(PROJECT_INCLUDE)/libcpu
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/libcpu     $(H_FILES:%=$(PROJECT_INCLUDE)/libcpu/%)
+
+
+EXTRA_DIST = $(C_FILES) $(S_FILES)
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+HEADERS =  $(noinst_HEADERS)
+
+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/lib.am $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in 
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
 
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
+tags: TAGS
 
-LIB = ${ARCH}/libcpuspec.a
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
 
-#
-# (OPTIONAL) Add local stuff here using +=
-#
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
 
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
+mostlyclean-tags:
 
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
+clean-tags:
 
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
+distclean-tags:
+	-rm -f TAGS ID
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
+maintainer-clean-tags:
 
-${LIB}: ${SRCS} ${OBJS}
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+	cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist
+	-rm -rf $(distdir)
+	@banner="$(distdir).tar.gz is ready for distribution"; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+distdir: $(DISTFILES)
+	-rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile $(HEADERS) all-local
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-tags clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-tags distclean-generic clean-am
+
+distclean: distclean-am
+	-rm -f config.status
+
+maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
+		distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+	-rm -f config.status
+
+.PHONY: tags mostlyclean-tags distclean-tags clean-tags \
+maintainer-clean-tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-local all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+
+include $(RTEMS_ROOT)/make/leaf.cfg
+
+define make-library
+$(RM) $@
+$(AR) $(ARFLAGS) $@ $^
+$(RANLIB) $@
+endef
+
+$(PROJECT_RELEASE)/lib:
+	@$(mkinstalldirs) $@
+
+.PRECIOUS: $(LIB)
+
+$(LIB): ${OBJS}
 	$(make-library)
 
-preinstall : 
-	@$(mkinstalldirs) $(PROJECT_INCLUDE)/libcpu
-	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/libcpu
+$(PROJECT_INCLUDE)/libcpu:
+	$(mkinstalldirs) $@
 
-all: ${ARCH} $(SRCS) preinstall $(OBJ) $(LIB)
-	cd wrapup; $(MAKE)
+$(PROJECT_INCLUDE)/libcpu/%.h: %.h
+	$(INSTALL_DATA) $< $@
 
-# the .rel file built here will be put into libcpu.a by ../wrapup/Makefile
-install: all
+$(PROJECT_RELEASE)/lib/$(LIBNAME)$(LIB_VARIANT).a: $(LIB)
+	$(INSTALL_DATA) $< $@
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+all-local: ${ARCH} $(PREINSTALL_FILES) $(TMPINSTALL_FILES)
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/m68k/Makefile.in b/c/src/lib/libcpu/m68k/Makefile.in
index ecde9c968a..873e5dcae0 100644
--- a/c/src/lib/libcpu/m68k/Makefile.in
+++ b/c/src/lib/libcpu/m68k/Makefile.in
@@ -1,25 +1,397 @@
-#
-#  $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = m68k
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
 
-VPATH = @srcdir@
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/directory.cfg
+top_builddir = .
 
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
 INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-SUBDIRS = $(wildcard $(RTEMS_CPU_MODEL))
+AUTOMAKE_OPTIONS = foreign 1.4
+ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+SUBDIRS = m68040
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/subdirs.am $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in 
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive  \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+	  rev="$$subdir $$rev"; \
+	  test "$$subdir" = "." && dot_seen=yes; \
+	done; \
+	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+   if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+   fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+	cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist
+	-rm -rf $(distdir)
+	@banner="$(distdir).tar.gz is ready for distribution"; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+distdir: $(DISTFILES)
+	-rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    chmod 777 $(distdir)/$$subdir; \
+	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile
+all-redirect: all-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am:  clean-tags clean-generic mostlyclean-am
+
+clean: clean-recursive
+
+distclean-am:  distclean-tags distclean-generic clean-am
+
+distclean: distclean-recursive
+	-rm -f config.status
+
+maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
+		distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f config.status
+
+.PHONY: install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+depend-recursive \
+preinstall-recursive \
+debug-recursive \
+profile-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+debug: debug-recursive
+.PHONY: debug-recursive
+
+profile: profile-recursive
+.PHONY: profile-recursive
+
+preinstall: preinstall-recursive
+.PHONY: preinstall-recursive
+
+depend: depend-recursive
+.PHONY: depend-recursive
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/m68k/m68040/Makefile.in b/c/src/lib/libcpu/m68k/m68040/Makefile.in
index de08bfc38b..79a2ff98f7 100644
--- a/c/src/lib/libcpu/m68k/m68040/Makefile.in
+++ b/c/src/lib/libcpu/m68k/m68040/Makefile.in
@@ -1,25 +1,353 @@
-#
-#  $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = m68k/m68040
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
 
-VPATH = @srcdir@
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/directory.cfg
+top_builddir = ..
 
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
 INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
+
+AUTOMAKE_OPTIONS = foreign 1.4
 
 SUBDIRS = fpsp
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/subdirs.am $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign m68040/Makefile
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive  \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+	  rev="$$subdir $$rev"; \
+	  test "$$subdir" = "." && dot_seen=yes; \
+	done; \
+	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+   if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+   fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = m68040
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign m68040/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    chmod 777 $(distdir)/$$subdir; \
+	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile
+all-redirect: all-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am:  clean-tags clean-generic mostlyclean-am
+
+clean: clean-recursive
+
+distclean-am:  distclean-tags distclean-generic clean-am
+
+distclean: distclean-recursive
+
+maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
+		distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+
+.PHONY: install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+depend-recursive \
+preinstall-recursive \
+debug-recursive \
+profile-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+debug: debug-recursive
+.PHONY: debug-recursive
+
+profile: profile-recursive
+.PHONY: profile-recursive
+
+preinstall: preinstall-recursive
+.PHONY: preinstall-recursive
+
+depend: depend-recursive
+.PHONY: depend-recursive
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/m68k/m68040/fpsp/Makefile.in b/c/src/lib/libcpu/m68k/m68040/fpsp/Makefile.in
index c93e8e9a0d..b3d3a88880 100644
--- a/c/src/lib/libcpu/m68k/m68040/fpsp/Makefile.in
+++ b/c/src/lib/libcpu/m68k/m68040/fpsp/Makefile.in
@@ -1,73 +1,290 @@
-#
-#  $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = m68k/m68040/fpsp
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-RTEMS_ROOT = @RTEMS_ROOT@
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
 PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-VPATH = @srcdir@
+AUTOMAKE_OPTIONS = foreign 1.4
 
 PGM = ${ARCH}/fpsp.rel
 
+TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib
+
 # C source names, if any, go here -- minus the .c
-C_PIECES = rtems_fpsp
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
+C_FILES = rtems_fpsp.c
+C_O_FILES = $(C_FILES:%.c=${ARCH}/%.o)
 
-H_FILES =
+H_FILES = fpsp.defs
+noinst_HEADERS = fpsp.defs
 
 # Assembly source names, if any, go here -- minus the .S
-S_PIECES = bindec binstr bugfix decbin do_func gen_except get_op kernel_ex \
-    res_func round rtems_skel sacos sasin satan satanh scale scosh setox \
-    sgetem sint slog2 slogn smovecr srem_mod ssin ssinh stan stanh sto_res \
-    stwotox tbldo util x_bsun x_fline x_operr x_ovfl x_snan x_store x_unfl \
-    x_unimp x_unsupp
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
+S_FILES = bindec.S binstr.S bugfix.S decbin.S do_func.S gen_except.S     get_op.S kernel_ex.S res_func.S round.S rtems_skel.S sacos.S sasin.S     satan.S satanh.S scale.S scosh.S setox.S sgetem.S sint.S slog2.S slogn.S     smovecr.S srem_mod.S ssin.S ssinh.S stan.S stanh.S sto_res.S stwotox.S     tbldo.S util.S x_bsun.S x_fline.S x_operr.S x_ovfl.S x_snan.S x_store.S     x_unfl.S x_unimp.S x_unsupp.S
 
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
+S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-INSTALL_CHANGE = @INSTALL_CHANGE@
+OBJS = $(C_O_FILES) $(S_O_FILES)
 
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES +=
-CPPFLAGS +=
-CFLAGS += $(CFLAGS_OS_V)
+AM_CFLAGS =  $(CFLAGS_OS_V)
 
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
+EXTRA_DIST = $(S_FILES) $(C_FILES)
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+HEADERS =  $(noinst_HEADERS)
 
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
+DIST_COMMON =  README Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/lib.am $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign m68040/fpsp/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+tags: TAGS
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = m68040/fpsp
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign m68040/fpsp/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile $(HEADERS) all-local
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-tags clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-tags distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
+		distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags mostlyclean-tags distclean-tags clean-tags \
+maintainer-clean-tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-local all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+
+include $(RTEMS_ROOT)/make/leaf.cfg
+
+define make-library
+$(RM) $@
+$(AR) $(ARFLAGS) $@ $^
+$(RANLIB) $@
+endef
+
+$(PROJECT_RELEASE)/lib:
+	@$(mkinstalldirs) $@
+
+.PRECIOUS: $(LIB)
 
 $(PGM): ${OBJS}
 	$(make-rel)
 
-all: ${ARCH} $(SRCS) $(PGM)
+@m68040_TRUE@all-local: ${ARCH} $(PGM)
+@m68040_FALSE@all-local:
 
-install: all
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/mips64orion/Makefile.in b/c/src/lib/libcpu/mips64orion/Makefile.in
index 1d1d660d04..3b655b0d77 100644
--- a/c/src/lib/libcpu/mips64orion/Makefile.in
+++ b/c/src/lib/libcpu/mips64orion/Makefile.in
@@ -1,25 +1,397 @@
-#
-#  $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = mips64orion
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
 
-VPATH = @srcdir@
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/directory.cfg
+top_builddir = .
 
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
 INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-SUBDIRS = include clock timer
+AUTOMAKE_OPTIONS = foreign 1.4
+ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+SUBDIRS = clock timer
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/subdirs.am $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in 
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive  \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+	  rev="$$subdir $$rev"; \
+	  test "$$subdir" = "." && dot_seen=yes; \
+	done; \
+	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+   if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+   fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+	cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist
+	-rm -rf $(distdir)
+	@banner="$(distdir).tar.gz is ready for distribution"; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+distdir: $(DISTFILES)
+	-rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    chmod 777 $(distdir)/$$subdir; \
+	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile
+all-redirect: all-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am:  clean-tags clean-generic mostlyclean-am
+
+clean: clean-recursive
+
+distclean-am:  distclean-tags distclean-generic clean-am
+
+distclean: distclean-recursive
+	-rm -f config.status
+
+maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
+		distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f config.status
+
+.PHONY: install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+depend-recursive \
+preinstall-recursive \
+debug-recursive \
+profile-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+debug: debug-recursive
+.PHONY: debug-recursive
+
+profile: profile-recursive
+.PHONY: profile-recursive
+
+preinstall: preinstall-recursive
+.PHONY: preinstall-recursive
+
+depend: depend-recursive
+.PHONY: depend-recursive
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/mips64orion/clock/Makefile.in b/c/src/lib/libcpu/mips64orion/clock/Makefile.in
index 1b81495d54..c46fc0c755 100644
--- a/c/src/lib/libcpu/mips64orion/clock/Makefile.in
+++ b/c/src/lib/libcpu/mips64orion/clock/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = mips64orion/clock
+top_builddir = ..
+subdir = clock
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/mips64orion/timer/Makefile.in b/c/src/lib/libcpu/mips64orion/timer/Makefile.in
index 83b5d9f771..a001585ec0 100644
--- a/c/src/lib/libcpu/mips64orion/timer/Makefile.in
+++ b/c/src/lib/libcpu/mips64orion/timer/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = mips64orion/timer
+top_builddir = ..
+subdir = timer
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/Makefile.in b/c/src/lib/libcpu/powerpc/Makefile.in
index 1a661a5b64..17360770ec 100644
--- a/c/src/lib/libcpu/powerpc/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/Makefile.in
@@ -5,8 +5,12 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = powerpc
+top_builddir = .
+
+ACLOCAL = aclocal
+AUTOCONF = autoconf
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+ACLOCAL_AMFLAGS = -I @RTEMS_TOPdir@/aclocal
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
@@ -20,13 +24,21 @@ INSTALL_CHANGE = @INSTALL_CHANGE@
 
 ifeq ($(RTEMS_CPU_MODEL),mpc750)
 SHARED_LIB = shared mpc6xx
-endif
+endif 
 ifeq ($(RTEMS_CPU_MODEL),mpc604)
 SHARED_LIB = shared mpc6xx
-endif
+endif 
 
 SUBDIRS = $(SHARED_LIB) $(wildcard $(RTEMS_CPU_MODEL)) wrapup
 
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+	 && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(srcdir) && $(AUTOCONF)
diff --git a/c/src/lib/libcpu/powerpc/mpc505/timer/Makefile.in b/c/src/lib/libcpu/powerpc/mpc505/timer/Makefile.in
index 5046a93550..0350136312 100644
--- a/c/src/lib/libcpu/powerpc/mpc505/timer/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc505/timer/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc505/timer
+top_builddir = ../..
+subdir = mpc505/timer
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/mpc505/vectors/Makefile.in b/c/src/lib/libcpu/powerpc/mpc505/vectors/Makefile.in
index 7e34eee6c4..f92365a165 100644
--- a/c/src/lib/libcpu/powerpc/mpc505/vectors/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc505/vectors/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc505/vectors
+top_builddir = ../..
+subdir = mpc505/vectors
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/mpc6xx/clock/Makefile.in b/c/src/lib/libcpu/powerpc/mpc6xx/clock/Makefile.in
index fc945cd304..03f3d88a99 100644
--- a/c/src/lib/libcpu/powerpc/mpc6xx/clock/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc6xx/clock/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc6xx/clock
+top_builddir = ../..
+subdir = mpc6xx/clock
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
@@ -32,6 +32,12 @@ include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
 include $(RTEMS_ROOT)/make/leaf.cfg
 
 INSTALL_CHANGE = @INSTALL_CHANGE@
+mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
+
+INSTALLDIRS = $(PROJECT_INCLUDE)/libcpu
+
+$(INSTALLDIRS):
+	@$(mkinstalldirs) $(INSTALLDIRS)
 
 #
 # (OPTIONAL) Add local stuff here using +=
diff --git a/c/src/lib/libcpu/powerpc/mpc6xx/exceptions/Makefile.in b/c/src/lib/libcpu/powerpc/mpc6xx/exceptions/Makefile.in
index 866432d3e9..9a1ec6af6a 100644
--- a/c/src/lib/libcpu/powerpc/mpc6xx/exceptions/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc6xx/exceptions/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc6xx/exceptions
+top_builddir = ../..
+subdir = mpc6xx/exceptions
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/mpc6xx/mmu/Makefile.in b/c/src/lib/libcpu/powerpc/mpc6xx/mmu/Makefile.in
index 44278afbbc..577519027a 100644
--- a/c/src/lib/libcpu/powerpc/mpc6xx/mmu/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc6xx/mmu/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc6xx/mmu
+top_builddir = ../..
+subdir = mpc6xx/mmu
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/mpc6xx/wrapup/Makefile.in b/c/src/lib/libcpu/powerpc/mpc6xx/wrapup/Makefile.in
index 577d6b09a6..47617d6230 100644
--- a/c/src/lib/libcpu/powerpc/mpc6xx/wrapup/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc6xx/wrapup/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc6xx/wrapup
+top_builddir = ../..
+subdir = mpc6xx/wrapup
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
@@ -14,13 +14,13 @@ PROJECT_ROOT = @PROJECT_ROOT@
 VPATH = @srcdir@
 
 # PROC_SPECIFIC_O_PIECES = exceptions mmu clock
-PROC_SPECIFIC_O_PIECES = exceptions mmu 
+PROC_SPECIFIC_O_PIECES = exceptions mmu
 GENERIC_PIECES =
 
 # bummer; have to use $foreach since % pattern subst rules only replace 1x
 OBJS = $(foreach piece, $(PROC_SPECIFIC_O_PIECES), \
-    ../../mpc6xx/$(piece)/$(ARCH)/*.o) $(foreach piece, \
-    $(GENERIC_PIECES), ../../mpc6xx/$(piece)/$(ARCH)/*.o)
+    ../../mpc6xx/$(piece)/$(ARCH)/*.o) $(foreach piece, $(GENERIC_PIECES), \
+    ../../mpc6xx/$(piece)/$(ARCH)/*.o)
 LIB = $(ARCH)/libcpuspec.a
 
 include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
diff --git a/c/src/lib/libcpu/powerpc/mpc821/clock/Makefile.in b/c/src/lib/libcpu/powerpc/mpc821/clock/Makefile.in
index f673eac6e4..110dbb838f 100644
--- a/c/src/lib/libcpu/powerpc/mpc821/clock/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc821/clock/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc821/clock
+top_builddir = ../..
+subdir = mpc821/clock
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/mpc821/console-generic/Makefile.in b/c/src/lib/libcpu/powerpc/mpc821/console-generic/Makefile.in
index 1d1ff23889..834614ce21 100644
--- a/c/src/lib/libcpu/powerpc/mpc821/console-generic/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc821/console-generic/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc821/console-generic
+top_builddir = ../..
+subdir = mpc821/console-generic
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/mpc821/timer/Makefile.in b/c/src/lib/libcpu/powerpc/mpc821/timer/Makefile.in
index 6a5762c3c8..dc0ea6658f 100644
--- a/c/src/lib/libcpu/powerpc/mpc821/timer/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc821/timer/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc821/timer
+top_builddir = ../..
+subdir = mpc821/timer
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/mpc821/vectors/Makefile.in b/c/src/lib/libcpu/powerpc/mpc821/vectors/Makefile.in
index 8ca776f4ab..e066c904f6 100644
--- a/c/src/lib/libcpu/powerpc/mpc821/vectors/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc821/vectors/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc821/vectors
+top_builddir = ../..
+subdir = mpc821/vectors
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/mpc860/clock/Makefile.in b/c/src/lib/libcpu/powerpc/mpc860/clock/Makefile.in
index a7c96691ef..22a762ead7 100644
--- a/c/src/lib/libcpu/powerpc/mpc860/clock/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc860/clock/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc860/clock
+top_builddir = ../..
+subdir = mpc860/clock
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/mpc860/console-generic/Makefile.in b/c/src/lib/libcpu/powerpc/mpc860/console-generic/Makefile.in
index 87a24d51af..e1575b1609 100644
--- a/c/src/lib/libcpu/powerpc/mpc860/console-generic/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc860/console-generic/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc860/console-generic
+top_builddir = ../..
+subdir = mpc860/console-generic
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/mpc860/timer/Makefile.in b/c/src/lib/libcpu/powerpc/mpc860/timer/Makefile.in
index 2fb7308cc5..38a3f30833 100644
--- a/c/src/lib/libcpu/powerpc/mpc860/timer/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc860/timer/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc860/timer
+top_builddir = ../..
+subdir = mpc860/timer
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/mpc860/vectors/Makefile.in b/c/src/lib/libcpu/powerpc/mpc860/vectors/Makefile.in
index bb6bc888bc..cae6bd8f35 100644
--- a/c/src/lib/libcpu/powerpc/mpc860/vectors/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc860/vectors/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mpc860/vectors
+top_builddir = ../..
+subdir = mpc860/vectors
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/ppc403/clock/Makefile.in b/c/src/lib/libcpu/powerpc/ppc403/clock/Makefile.in
index 81cd10c2f8..1351359654 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/clock/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/ppc403/clock/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/ppc403/clock
+top_builddir = ../..
+subdir = ppc403/clock
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/ppc403/console/Makefile.in b/c/src/lib/libcpu/powerpc/ppc403/console/Makefile.in
index ee004019c3..194328212b 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/console/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/ppc403/console/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/ppc403/console
+top_builddir = ../..
+subdir = ppc403/console
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/ppc403/ictrl/Makefile.in b/c/src/lib/libcpu/powerpc/ppc403/ictrl/Makefile.in
index af8c0b4e70..9a4a08cf47 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/ictrl/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/ppc403/ictrl/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/ppc403/ictrl
+top_builddir = ../..
+subdir = ppc403/ictrl
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/ppc403/timer/Makefile.in b/c/src/lib/libcpu/powerpc/ppc403/timer/Makefile.in
index c8215c3c83..32cceed6ff 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/timer/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/ppc403/timer/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/ppc403/timer
+top_builddir = ../..
+subdir = ppc403/timer
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/ppc403/vectors/Makefile.in b/c/src/lib/libcpu/powerpc/ppc403/vectors/Makefile.in
index 83770293c2..cf4f5a7bff 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/vectors/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/ppc403/vectors/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/ppc403/vectors
+top_builddir = ../..
+subdir = ppc403/vectors
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/shared/Makefile.in b/c/src/lib/libcpu/powerpc/shared/Makefile.in
index d0078a7476..4cbfdeae74 100644
--- a/c/src/lib/libcpu/powerpc/shared/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/shared/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = powerpc/shared
+top_builddir = ..
+subdir = shared
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/powerpc/wrapup/Makefile.in b/c/src/lib/libcpu/powerpc/wrapup/Makefile.in
index 5535579e1d..c6365afd6f 100644
--- a/c/src/lib/libcpu/powerpc/wrapup/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/wrapup/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = powerpc/wrapup
+top_builddir = ..
+subdir = wrapup
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
@@ -18,7 +18,8 @@ GENERIC_PIECES = shared
 # Use two variables so that I can make two ar command.
 # So far FAMILY_OBJ is empty and ar dislike it...
 CPU_SPECIFIC_OBJS = $(wildcard ../$(RTEMS_CPU_MODEL)/*/$(ARCH)/*.o)
-FAMILY_OBJS = $(wildcard ../shared/$(ARCH)/*.o ../shared/*/$(ARCH)/*.o ../mpc6xx/*/$(ARCH)/*.o)
+FAMILY_OBJS = $(wildcard ../shared/$(ARCH)/*.o ../shared/*/$(ARCH)/*.o \
+    ../mpc6xx/*/$(ARCH)/*.o)
 
 LIB = $(ARCH)/libcpu.a
 
diff --git a/c/src/lib/libcpu/sh/Makefile.in b/c/src/lib/libcpu/sh/Makefile.in
index 896972d6c1..8de95c52ea 100644
--- a/c/src/lib/libcpu/sh/Makefile.in
+++ b/c/src/lib/libcpu/sh/Makefile.in
@@ -1,25 +1,397 @@
-#
-#  $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = sh
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
 
-VPATH = @srcdir@
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/directory.cfg
+top_builddir = .
 
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
 INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-SUBDIRS = $(wildcard $(RTEMS_CPU_MODEL))
+AUTOMAKE_OPTIONS = foreign 1.4
+ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+SUBDIRS = @RTEMS_CPU_MODEL@
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/subdirs.am $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in 
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive  \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+	  rev="$$subdir $$rev"; \
+	  test "$$subdir" = "." && dot_seen=yes; \
+	done; \
+	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+   if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+   fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+	cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist
+	-rm -rf $(distdir)
+	@banner="$(distdir).tar.gz is ready for distribution"; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+distdir: $(DISTFILES)
+	-rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    chmod 777 $(distdir)/$$subdir; \
+	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile
+all-redirect: all-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am:  clean-tags clean-generic mostlyclean-am
+
+clean: clean-recursive
+
+distclean-am:  distclean-tags distclean-generic clean-am
+
+distclean: distclean-recursive
+	-rm -f config.status
+
+maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
+		distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f config.status
+
+.PHONY: install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+depend-recursive \
+preinstall-recursive \
+debug-recursive \
+profile-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+debug: debug-recursive
+.PHONY: debug-recursive
+
+profile: profile-recursive
+.PHONY: profile-recursive
+
+preinstall: preinstall-recursive
+.PHONY: preinstall-recursive
+
+depend: depend-recursive
+.PHONY: depend-recursive
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sh/sh7032/Makefile.in b/c/src/lib/libcpu/sh/sh7032/Makefile.in
index d9daeceb66..d3a43d2149 100644
--- a/c/src/lib/libcpu/sh/sh7032/Makefile.in
+++ b/c/src/lib/libcpu/sh/sh7032/Makefile.in
@@ -1,25 +1,353 @@
-#
-# $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = sh/sh7032
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
 
-VPATH = @srcdir@
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/directory.cfg
+top_builddir = ..
 
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
 INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
+
+AUTOMAKE_OPTIONS = foreign 1.4
 
 SUBDIRS = include clock timer null sci delay
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/subdirs.am $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7032/Makefile
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive  \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+	  rev="$$subdir $$rev"; \
+	  test "$$subdir" = "." && dot_seen=yes; \
+	done; \
+	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+   if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+   fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = sh7032
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7032/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    chmod 777 $(distdir)/$$subdir; \
+	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile
+all-redirect: all-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am:  clean-tags clean-generic mostlyclean-am
+
+clean: clean-recursive
+
+distclean-am:  distclean-tags distclean-generic clean-am
+
+distclean: distclean-recursive
+
+maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
+		distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+
+.PHONY: install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+depend-recursive \
+preinstall-recursive \
+debug-recursive \
+profile-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+debug: debug-recursive
+.PHONY: debug-recursive
+
+profile: profile-recursive
+.PHONY: profile-recursive
+
+preinstall: preinstall-recursive
+.PHONY: preinstall-recursive
+
+depend: depend-recursive
+.PHONY: depend-recursive
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sh/sh7032/clock/Makefile.in b/c/src/lib/libcpu/sh/sh7032/clock/Makefile.in
index 523533363f..9a4223d97f 100644
--- a/c/src/lib/libcpu/sh/sh7032/clock/Makefile.in
+++ b/c/src/lib/libcpu/sh/sh7032/clock/Makefile.in
@@ -1,71 +1,240 @@
-#
-# $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = sh/sh7032/clock
-
-RTEMS_ROOT = @RTEMS_ROOT@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
 PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-VPATH = @srcdir@
+AUTOMAKE_OPTIONS = foreign 1.4
 
 PGM = ${ARCH}/clock.rel
 
-# C source names, if any, go here -- minus the .c
-C_PIECES = ckinit
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
+C_FILES = ckinit.c
+C_O_FILES = $(C_FILES:%.c=${ARCH}/%.o)
 
-H_FILES =
+H_FILES = 
 
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
+S_FILES = 
 S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-SRCS = $(C_FILES) $(H_FILES) $(S_FILES)
 OBJS = $(C_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES +=
-CPPFLAGS +=
-CFLAGS += $(CFLAGS_OS_V)
+AM_CFLAGS =  $(CFLAGS_OS_V)
 
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
+EXTRA_DIST = $(C_FILES) $(S_FILES)
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7032/clock/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
 
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = sh7032/clock
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7032/clock/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(RTEMS_ROOT)/make/leaf.cfg
 
 ${PGM}: ${OBJS}
 	${make-rel}
 
-all: ${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(PGM)
 
-# the .rel file built here will be put into libbsp.a by
-#    libbsp/sh/BSP/wrapup/Makefile
-install: all
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sh/sh7032/delay/Makefile.in b/c/src/lib/libcpu/sh/sh7032/delay/Makefile.in
index a011997583..de557ff6c6 100644
--- a/c/src/lib/libcpu/sh/sh7032/delay/Makefile.in
+++ b/c/src/lib/libcpu/sh/sh7032/delay/Makefile.in
@@ -1,70 +1,238 @@
-#
-#  $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = sh/sh7032/delay
-
-RTEMS_ROOT = @RTEMS_ROOT@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
 PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-VPATH = @srcdir@
+AUTOMAKE_OPTIONS = foreign 1.4
 
 PGM = ${ARCH}/delay.rel
 
-# C source names, if any, go here -- minus the .c
-C_PIECES = delay
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
+C_FILES = delay.c
+C_O_FILES = $(C_FILES:%.c=${ARCH}/%.o)
 
-H_FILES =
+H_FILES = 
 
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
+S_FILES = 
 S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-SRCS = $(DOCS) $(C_FILES) $(H_FILES)
 OBJS = $(C_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
+EXTRA_DIST = $(C_FILES) $(S_FILES)
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
 
-INSTALL_CHANGE = @INSTALL_CHANGE@
 
-#
-# (OPTIONAL) Add local stuff here using +=
-#
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7032/delay/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
 
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
+subdir = sh7032/delay
 
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7032/delay/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(RTEMS_ROOT)/make/leaf.cfg
 
 #
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
+# (OPTIONAL) Add local stuff here using +=
 #
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
 ${PGM}: ${OBJS}
 	$(make-rel)
 
-all: ${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(PGM)
 
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sh/sh7032/include/Makefile.in b/c/src/lib/libcpu/sh/sh7032/include/Makefile.in
index 4e6e7d1a82..9cd7afd5af 100644
--- a/c/src/lib/libcpu/sh/sh7032/include/Makefile.in
+++ b/c/src/lib/libcpu/sh/sh7032/include/Makefile.in
@@ -1,46 +1,259 @@
-#
-# $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
 
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = sh/sh7032/include
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+SHELL = @SHELL@
 
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
 VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-H_FILES = $(srcdir)/null.h $(srcdir)/sci.h $(srcdir)/sh7_pfc.h \
-    $(srcdir)/sh7_sci.h
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
 
-SRCS = $(H_FILES)
+DESTDIR =
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
 
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
 
-INSTALLDIRS = $(PROJECT_INCLUDE)/sh
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
 
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
+AUTOMAKE_OPTIONS = foreign 1.4
 
-all: install
+H_FILES = null.h sci.h sh7_pfc.h sh7_sci.h
+noinst_HEADERS = $(H_FILES)
 
 # NOTE: Unlike other CPUS, we install into a subdirectory to avoid 
 #       file name conflicts
 
-install: 
-	$(mkinstalldirs) $(PROJECT_INCLUDE)/sh 
-	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/sh
+TMPINSTALL_FILES = $(PROJECT_INCLUDE)/sh     $(H_FILES:%=$(PROJECT_INCLUDE)/sh/%)
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+HEADERS =  $(noinst_HEADERS)
+
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7032/include/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = sh7032/include
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7032/include/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile $(HEADERS) all-local
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-tags clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-tags distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
+		distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags mostlyclean-tags distclean-tags clean-tags \
+maintainer-clean-tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-local all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+$(PROJECT_INCLUDE)/sh:
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/sh/%.h: %.h
+	$(INSTALL_DATA) $< $@
+
+all-local: $(TMPINSTALL_FILES)
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sh/sh7032/null/Makefile.in b/c/src/lib/libcpu/sh/sh7032/null/Makefile.in
index df868721a1..16018072a6 100644
--- a/c/src/lib/libcpu/sh/sh7032/null/Makefile.in
+++ b/c/src/lib/libcpu/sh/sh7032/null/Makefile.in
@@ -1,70 +1,238 @@
-#
-#  $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = sh/sh7032/null
-
-RTEMS_ROOT = @RTEMS_ROOT@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
 PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-VPATH = @srcdir@
+AUTOMAKE_OPTIONS = foreign 1.4
 
 PGM = ${ARCH}/null.rel
 
-# C source names, if any, go here -- minus the .c
-C_PIECES = open close read write init cntrl
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
+C_FILES = open.c close.c read.c write.c init.c cntrl.c
+C_O_FILES = $(C_FILES:%.c=${ARCH}/%.o)
 
-H_FILES =
+H_FILES = 
 
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
+S_FILES = 
 S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-SRCS = $(DOCS) $(C_FILES) $(H_FILES)
 OBJS = $(C_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
+EXTRA_DIST = $(C_FILES) $(S_FILES)
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
 
-INSTALL_CHANGE = @INSTALL_CHANGE@
 
-#
-# (OPTIONAL) Add local stuff here using +=
-#
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7032/null/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
 
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
+subdir = sh7032/null
 
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7032/null/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(RTEMS_ROOT)/make/leaf.cfg
 
 #
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
+# (OPTIONAL) Add local stuff here using +=
 #
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
 ${PGM}: ${OBJS}
 	$(make-rel)
 
-all: ${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(PGM)
 
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sh/sh7032/sci/Makefile.in b/c/src/lib/libcpu/sh/sh7032/sci/Makefile.in
index 25dff54db7..995bd34234 100644
--- a/c/src/lib/libcpu/sh/sh7032/sci/Makefile.in
+++ b/c/src/lib/libcpu/sh/sh7032/sci/Makefile.in
@@ -1,71 +1,238 @@
-##
-##  $Id$
-##
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = sh/sh7032/sci
-
-RTEMS_ROOT = @RTEMS_ROOT@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
 PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-VPATH = @srcdir@
+AUTOMAKE_OPTIONS = foreign 1.4
 
 PGM = ${ARCH}/sci.rel
 
-# C source names, if any, go here -- minus the .c
-C_PIECES = sci
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
+C_FILES = sci.c
+C_O_FILES = $(C_FILES:%.c=${ARCH}/%.o)
 
-H_FILES =
+H_FILES = 
 
-# Assembly source names, if any, go here -- minus the .s
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
+S_FILES = 
 S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-SRCS = $(C_FILES) $(H_FILES) $(S_FILES)
 OBJS = $(C_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
+EXTRA_DIST = $(C_FILES) $(S_FILES)
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
 
-INSTALL_CHANGE = @INSTALL_CHANGE@
 
-#
-# (OPTIONAL) Add local stuff here using +=
-#
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7032/sci/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = sh7032/sci
 
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7032/sci/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
 
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(RTEMS_ROOT)/make/leaf.cfg
 
 #
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
+# (OPTIONAL) Add local stuff here using +=
 #
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
 ${PGM}: ${OBJS}
 	$(make-rel)
 
-all: ${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(PGM)
 
-# the .rel file built here will be put into libbsp.a by 
-# 	libbsp/sh/BSP/wrapup/Makefile
-install: all
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sh/sh7032/timer/Makefile.in b/c/src/lib/libcpu/sh/sh7032/timer/Makefile.in
index 87ab7ebfee..1e63199162 100644
--- a/c/src/lib/libcpu/sh/sh7032/timer/Makefile.in
+++ b/c/src/lib/libcpu/sh/sh7032/timer/Makefile.in
@@ -1,71 +1,237 @@
-#
-#  $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
 
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = sh/sh7032/timer
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
 
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
 
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
 VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
+AUTOMAKE_OPTIONS = foreign 1.4
 PGM = ${ARCH}/timer.rel
 
-# C source names, if any, go here -- minus the .c
-C_PIECES = timer
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
+C_FILES = timer.c
+C_O_FILES = $(C_FILES:%.c=${ARCH}/%.o)
 
-H_FILES =
+H_FILES = 
 
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
+S_FILES = 
 S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-SRCS = $(C_FILES) $(H_FILES) $(S_FILES)
 OBJS = $(C_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
+EXTRA_DIST = $(C_FILES) $(S_FILES)
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
 
-INSTALL_CHANGE = @INSTALL_CHANGE@
 
-#
-# (OPTIONAL) Add local stuff here using +=
-#
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7032/timer/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
 
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
+subdir = sh7032/timer
 
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7032/timer/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(RTEMS_ROOT)/make/leaf.cfg
 
 #
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
+# (OPTIONAL) Add local stuff here using +=
 #
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
 ${PGM}: ${OBJS}
 	$(make-rel)
 
-all: ${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(PGM)
 
-# the .rel file built here will be put into libbsp.a by 
-# libbsp/sh/BSP/Makefile
-install: all
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sh/sh7045/Makefile.in b/c/src/lib/libcpu/sh/sh7045/Makefile.in
index b99c954d00..3d5dbf7757 100644
--- a/c/src/lib/libcpu/sh/sh7045/Makefile.in
+++ b/c/src/lib/libcpu/sh/sh7045/Makefile.in
@@ -1,25 +1,353 @@
-##
-## $Id$
-##
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = sh/sh7045
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
 
-VPATH = @srcdir@
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/directory.cfg
+top_builddir = ..
 
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
 INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
+
+AUTOMAKE_OPTIONS = foreign 1.4
 
 SUBDIRS = include clock sci timer null
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/subdirs.am $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7045/Makefile
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive  \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+	  rev="$$subdir $$rev"; \
+	  test "$$subdir" = "." && dot_seen=yes; \
+	done; \
+	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+   if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+   fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = sh7045
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7045/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    chmod 777 $(distdir)/$$subdir; \
+	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile
+all-redirect: all-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am:  clean-tags clean-generic mostlyclean-am
+
+clean: clean-recursive
+
+distclean-am:  distclean-tags distclean-generic clean-am
+
+distclean: distclean-recursive
+
+maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
+		distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+
+.PHONY: install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+depend-recursive \
+preinstall-recursive \
+debug-recursive \
+profile-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+debug: debug-recursive
+.PHONY: debug-recursive
+
+profile: profile-recursive
+.PHONY: profile-recursive
+
+preinstall: preinstall-recursive
+.PHONY: preinstall-recursive
+
+depend: depend-recursive
+.PHONY: depend-recursive
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sh/sh7045/clock/Makefile.in b/c/src/lib/libcpu/sh/sh7045/clock/Makefile.in
index c7804aad7a..88c19fe691 100644
--- a/c/src/lib/libcpu/sh/sh7045/clock/Makefile.in
+++ b/c/src/lib/libcpu/sh/sh7045/clock/Makefile.in
@@ -1,71 +1,240 @@
-##
-## $Id$
-##
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = sh/sh7045/clock
-
-RTEMS_ROOT = @RTEMS_ROOT@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
 PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-VPATH = @srcdir@
+AUTOMAKE_OPTIONS = foreign 1.4
 
 PGM = ${ARCH}/clock.rel
 
-# C source names, if any, go here -- minus the .c
-C_PIECES = ckinit
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
+C_FILES = ckinit.c
+C_O_FILES = $(C_FILES:%.c=${ARCH}/%.o)
 
-H_FILES =
+H_FILES = 
 
-# Assembly source names, if any, go here -- minus the .s
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.s)
+S_FILES = 
 S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o)
 
-SRCS = $(C_FILES) $(H_FILES) $(S_FILES)
 OBJS = $(C_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
 #
 # (OPTIONAL) Add local stuff here using +=
 #
 
-DEFINES +=
-CPPFLAGS +=
-CFLAGS += $(CFLAGS_OS_V)
+AM_CFLAGS =  $(CFLAGS_OS_V)
 
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
+EXTRA_DIST = $(C_FILES) $(S_FILES)
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
 
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7045/clock/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = sh7045/clock
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7045/clock/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(RTEMS_ROOT)/make/leaf.cfg
 
 ${PGM}: ${OBJS}
 	${make-rel}
 
-all: ${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(PGM)
 
-# the .rel file built here will be put into libbsp.a by
-#    libbsp/sh/BSP/wrapup/Makefile
-install: all
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sh/sh7045/include/Makefile.in b/c/src/lib/libcpu/sh/sh7045/include/Makefile.in
index bf69d92121..b93f585d4f 100644
--- a/c/src/lib/libcpu/sh/sh7045/include/Makefile.in
+++ b/c/src/lib/libcpu/sh/sh7045/include/Makefile.in
@@ -1,46 +1,228 @@
-#
-# $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
 
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = sh/sh7045/include
 
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
 
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
 VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-H_FILES = $(srcdir)/io_types.h $(srcdir)/null.h $(srcdir)/sci.h \
-    $(srcdir)/sh7_pfc.h $(srcdir)/sh7_sci.h
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
 
-SRCS = $(H_FILES)
+DESTDIR =
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
 
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
 
-INSTALLDIRS = $(PROJECT_INCLUDE)/sh
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
 
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
+AUTOMAKE_OPTIONS = foreign 1.4
 
-all: install
+H_FILES = io_types.h null.h sci.h sh7_pfc.h sh7_sci.h
 
 # NOTE: Unlike other CPUS, we install into a subdirectory to avoid 
 #       file name conflicts
 
-install: 
-	$(mkinstalldirs) $(PROJECT_INCLUDE)/sh
-	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/sh
+TMPINSTALL_FILES =  $(PROJECT_INCLUDE)/sh $(H_FILES:%=$(PROJECT_INCLUDE)/sh/%)
+
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7045/include/Makefile
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = sh7045/include
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7045/include/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile all-local
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-local all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+$(PROJECT_INCLUDE)/sh:
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/sh/%.h: %.h
+	$(INSTALL_DATA) $< $@
+
+all-local: $(TMPINSTALL_FILES)
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sh/sh7045/null/Makefile.in b/c/src/lib/libcpu/sh/sh7045/null/Makefile.in
index 3f67f1653e..aeff7218bb 100644
--- a/c/src/lib/libcpu/sh/sh7045/null/Makefile.in
+++ b/c/src/lib/libcpu/sh/sh7045/null/Makefile.in
@@ -1,70 +1,238 @@
-#
-#  $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = sh/sh7045/null
-
-RTEMS_ROOT = @RTEMS_ROOT@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
 PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-VPATH = @srcdir@
+AUTOMAKE_OPTIONS = foreign 1.4
 
 PGM = ${ARCH}/null.rel
 
-# C source names, if any, go here -- minus the .c
-C_PIECES = open close read write init cntrl
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
+C_FILES = open.c close.c read.c write.c init.c cntrl.c
+C_O_FILES = $(C_FILES:%.c=${ARCH}/%.o)
 
-H_FILES =
+H_FILES = 
 
-# Assembly source names, if any, go here -- minus the .s
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.s)
-S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o)
+S_FILES = 
+S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-SRCS = $(DOCS) $(C_FILES) $(H_FILES)
 OBJS = $(C_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
+EXTRA_DIST = $(C_FILES) $(S_FILES)
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
 
-INSTALL_CHANGE = @INSTALL_CHANGE@
 
-#
-# (OPTIONAL) Add local stuff here using +=
-#
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7045/null/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
 
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
+subdir = sh7045/null
 
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7045/null/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(RTEMS_ROOT)/make/leaf.cfg
 
 #
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
+# (OPTIONAL) Add local stuff here using +=
 #
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
 ${PGM}: ${OBJS}
 	$(make-rel)
 
-all: ${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(PGM)
 
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sh/sh7045/sci/Makefile.in b/c/src/lib/libcpu/sh/sh7045/sci/Makefile.in
index 82a034ff17..a05a099614 100644
--- a/c/src/lib/libcpu/sh/sh7045/sci/Makefile.in
+++ b/c/src/lib/libcpu/sh/sh7045/sci/Makefile.in
@@ -1,71 +1,238 @@
-##
-##  $Id$
-##
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = sh/sh7045/sci
-
-RTEMS_ROOT = @RTEMS_ROOT@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
 PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-VPATH = @srcdir@
+AUTOMAKE_OPTIONS = foreign 1.4
 
 PGM = ${ARCH}/sci.rel
 
-# C source names, if any, go here -- minus the .c
-C_PIECES = sci
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
+C_FILES = sci.c
+C_O_FILES = $(C_FILES:%.c=${ARCH}/%.o)
 
-H_FILES =
+H_FILES = 
 
-# Assembly source names, if any, go here -- minus the .s
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.s)
-S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o)
+S_FILES = 
+S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-SRCS = $(C_FILES) $(H_FILES) $(S_FILES)
 OBJS = $(C_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
+EXTRA_DIST = $(C_FILES) $(S_FILES)
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
 
-INSTALL_CHANGE = @INSTALL_CHANGE@
 
-#
-# (OPTIONAL) Add local stuff here using +=
-#
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7045/sci/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = sh7045/sci
 
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7045/sci/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
 
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(RTEMS_ROOT)/make/leaf.cfg
 
 #
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
+# (OPTIONAL) Add local stuff here using +=
 #
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
 ${PGM}: ${OBJS}
 	$(make-rel)
 
-all: ${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(PGM)
 
-# the .rel file built here will be put into libbsp.a by 
-# 	libbsp/sh/BSP/wrapup/Makefile
-install: all
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sh/sh7045/timer/Makefile.in b/c/src/lib/libcpu/sh/sh7045/timer/Makefile.in
index 53e80340cd..96400575df 100644
--- a/c/src/lib/libcpu/sh/sh7045/timer/Makefile.in
+++ b/c/src/lib/libcpu/sh/sh7045/timer/Makefile.in
@@ -1,71 +1,238 @@
-##
-##  $Id$
-##
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = sh/sh7045/timer
-
-RTEMS_ROOT = @RTEMS_ROOT@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
 PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
 
-VPATH = @srcdir@
+AUTOMAKE_OPTIONS = foreign 1.4
 
 PGM = ${ARCH}/timer.rel
 
-# C source names, if any, go here -- minus the .c
-C_PIECES = timer
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
+C_FILES = timer.c
+C_O_FILES = $(C_FILES:%.c=${ARCH}/%.o)
 
-H_FILES =
+H_FILES = 
 
-# Assembly source names, if any, go here -- minus the .s
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.s)
-S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o)
+S_FILES = 
+S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
 
-SRCS = $(C_FILES) $(H_FILES) $(S_FILES)
 OBJS = $(C_O_FILES) $(S_O_FILES)
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
+EXTRA_DIST = $(C_FILES) $(S_FILES)
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
 
-INSTALL_CHANGE = @INSTALL_CHANGE@
 
-#
-# (OPTIONAL) Add local stuff here using +=
-#
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign sh7045/timer/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = sh7045/timer
 
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign sh7045/timer/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
 
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(RTEMS_ROOT)/make/leaf.cfg
 
 #
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
+# (OPTIONAL) Add local stuff here using +=
 #
 
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
 ${PGM}: ${OBJS}
 	$(make-rel)
 
-all: ${ARCH} $(SRCS) $(PGM)
+all: ${ARCH} $(PGM)
 
-# the .rel file built here will be put into libbsp.a by 
-# libbsp/sh/BSP/Makefile
-install: all
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sparc/Makefile.in b/c/src/lib/libcpu/sparc/Makefile.in
index 87b946d064..d67e159b0c 100644
--- a/c/src/lib/libcpu/sparc/Makefile.in
+++ b/c/src/lib/libcpu/sparc/Makefile.in
@@ -1,25 +1,397 @@
-#
-#  $Id$
-#
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+SHELL = @SHELL@
 
-@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = sparc
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
 
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
 
-VPATH = @srcdir@
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
 
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/directory.cfg
+top_builddir = .
 
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+CC = @CC@
+CC_FOR_TARGET = @CC_FOR_TARGET@
+CPP = @CPP@
+GCCSED = @GCCSED@
 INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
+
+AUTOMAKE_OPTIONS = foreign 1.4
+ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
 
 SUBDIRS = reg_win syscall
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../automake/subdirs.am $(top_srcdir)/../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
 
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in 
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive  \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+	  rev="$$subdir $$rev"; \
+	  test "$$subdir" = "." && dot_seen=yes; \
+	done; \
+	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+   if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+   fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+	cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist
+	-rm -rf $(distdir)
+	@banner="$(distdir).tar.gz is ready for distribution"; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+distdir: $(DISTFILES)
+	-rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    chmod 777 $(distdir)/$$subdir; \
+	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile
+all-redirect: all-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am:  clean-tags clean-generic mostlyclean-am
+
+clean: clean-recursive
+
+distclean-am:  distclean-tags distclean-generic clean-am
+
+distclean: distclean-recursive
+	-rm -f config.status
+
+maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
+		distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f config.status
+
+.PHONY: install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+depend-recursive \
+preinstall-recursive \
+debug-recursive \
+profile-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+debug: debug-recursive
+.PHONY: debug-recursive
+
+profile: profile-recursive
+.PHONY: profile-recursive
+
+preinstall: preinstall-recursive
+.PHONY: preinstall-recursive
+
+depend: depend-recursive
+.PHONY: depend-recursive
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libcpu/sparc/reg_win/Makefile.in b/c/src/lib/libcpu/sparc/reg_win/Makefile.in
index 0d2cbb5507..0df8cda84b 100644
--- a/c/src/lib/libcpu/sparc/reg_win/Makefile.in
+++ b/c/src/lib/libcpu/sparc/reg_win/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = sparc/reg_win
+top_builddir = ..
+subdir = reg_win
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@
diff --git a/c/src/lib/libcpu/sparc/syscall/Makefile.in b/c/src/lib/libcpu/sparc/syscall/Makefile.in
index 044017f846..4ae121928a 100644
--- a/c/src/lib/libcpu/sparc/syscall/Makefile.in
+++ b/c/src/lib/libcpu/sparc/syscall/Makefile.in
@@ -5,8 +5,8 @@
 @SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = sparc/syscall
+top_builddir = ..
+subdir = syscall
 
 RTEMS_ROOT = @RTEMS_ROOT@
 PROJECT_ROOT = @PROJECT_ROOT@