This is part of a major patch from Ralf Corsepius <corsepiu@faw.uni-ulm.de>

to move RTEMS more to automake/autoconf and GNU compliance.

    Finally, here they are: the "big-patch" patches - merged into one big
    patch (~1.5MB).

    Sorry for the delay, but testing took much more time than I had expected
    - esp. reworking the acpolish script triggered many more tiny issues
    than I had expected (cf. below).

    At least, now you've got something to spend your weekend with :-.


    WARNINGS:
    * I've gone a little (??) further than I had announced before.
    * Several directories have been moved.
    * Several files have been added and removed
    * I have tested it with many BSPs/CPUs and a variety of permutiations of
    configuration flags, but not with all.
    * Most parts of the patch are automatically generated, however there are
    many tiny manual modifications.

    APPLYING THE PATCH:

    ./autogen -c
    mkdir tools
    mv c/src/exec/score/tools tools/cpu
    mv c/build-tools tools/build
    mv c/update-tools tools/update
    patch -p1 -E < rtems-rc-19990709-0.diff
    ./autogen

    If the patch doesn't apply to rtems-cvs, I would suggest that you should
    try to apply it brute-force and then to run tools/update/rtems-polish.sh
    -ac -am afterwards. A recursive diff between rtems-19990709 + patch and
    rtems-cvs + patch then should report only a few dozen significant
    changes to configuration files which need to be merged manually (IIRC, I
    did not change any source files).

    *** Attention: There are files to be removed, moved, copied and added
    in/to CVS!

    NEWS/CHANGES:
    1. Configuration takes place in 3 stages: 1. per host (toplevel
    configure script), 2. per target (c/configure), 3. per bsp
    c/src/configure automatically triggered from ./configure and
    c/Makefile.am.
    2. Building of subdirectory c/ takes place in c/$(target_alias) for
    cross-targets in c/ for native targets
    3. Building of subdirectory c/src takes place in c/${target_alias}/<bsp>
    for cross-targets, c/<bsp> for native targets
    4. c/build-tools moved to tools/build
    5. c/src/exec/score/cpu/tools moved to tools/cpu (=cpu-tools split out)
    6. c/update-tools moved to tools/update
    7. New subdirectory c/src/make, handles files from make/ on a per BSP
    basis
    8. Maintainer mode support: Ie. if configuring with
    --enable-maintainer-mode disabled (the default), then tracking of many
    dependencies will be disabled in Makefiles. Esp. many dependencies for
    auto* generated files will be switched off in Makefiles. Ie. if not
    using "--enable-maintainer-mode" many auto* generated files will not be
    updated automatically, i.e. normal users should not be required to have
    auto* tools anymore (untested).
    9. Independent configuration scripts for / (toplevel), tools/build,
    tools/cpu, tools/update, c/, c/src/, c/src/exec, c/src/lib, c/src/tests,
    c/src/make
    10. Automake support for all directories above and besides c/src
    11. "preinstall" now is implemented as depth-first recursive make target

    12. host compiled tools (exception bsp-tools) are accessed in location
    in the build tree instead of inside the build-tree when building RTEMS.
    13. RTEMS_ROOT and PROJECT_ROOT now point to directories inside the
    build-tree - many tiny changes as consequence from this.
    14. --with-cross-host support removed (offically announced obsolete by
    cygnus)
    15. Changing the order of building libraries below c/src/lib/
    16. Former toplevel configure script broken into aclocal/*.m4 macros
    17. Newlib now detected by configure macros, RTEMS_HAS_NEWLIB removed
    from *cfg.
    18. sptables.h now generated by autoconf
    19. Rules for "mkinstalldirs temporary installation tree" moved from
    c/Makefile to subdirectories.
    20. Cpu-tools do not get installed.
    21. FIX: Use ACLOCAL_AMFLAGS instead of ACLOCAL = -I ... in Makefile.ams
    which are in directories with own configure scripts.
    22. Hardcoding BSP names into libbsp/.../tools to avoid RTEMS_BSP get
    overridden from the environment.
    22. FIX: Handling of MP_PIECES in various Makefiles
    23. FIX: Removing "::" rules from some Makefile.ins
    24. FIX: File permission chaos: (-m 444 and -m 555 vs. -m 644 and -m
    755) - Now all include files use -m 644.
    25. Removed many gnumake-conditionals in Makefile.ins - Partially
    replaced with automake-conditional, partially replaced with
    conditionalized Makefile variables (... _yes_V)
    26. Massively reworked acpolish: acpolish now parses Makefile.ins and
    interprets parts of the Makefile.ins.
    27. FIX: Some $(wildcard $(srcdir)/*.h) macros removed / replaced with
    explicit lists of files in Makefile.ins.
    28. FIX: Replacing MKLIB with RANLIB in Makefile.ins
    29. HACK: Add preinstallation for pc386 specific
    $(PROJECT_RELEASE)/BootImgs directory

    ... many more details, I can't recall


    KNOWN BUGS:
    1. make [debug|profile]_install do not do what they are promissing.
    "make [debug|profile] install" does what "make [debug|profile]_install"
    has been doing. Proposal: remove [debug|profile]_install
    2. Dependencies between temporary installation tree and source tree are
    not yet handled correctly.
    3. Dependencies between temporary installation tree and source tree are
    handled ineffencently (Using INSTALL_CHANGE instead of make
    dependencies)
    4. RTEMS_ROOT, PROJECT_ROOT, top_builddir, RTEMS_TOPdir now are
    redundant.
    5. The new configure scripts still are in their infancy. They contain
    redundant checks and might still contain bugs, too.
    6. RTEMS autoconf Makefile.ins use a mixture of configuration
    information gathered in c/$(target_alias)/<bsp>/make and of information
    collected from their configure scripts.
    7. make dist is not fully functional
    8. Subdirectory host-/build-/target- configure options (--target,
    --host, --build) do not conform to Cygnus/GNU conventions.
    9. Some RTEMS autoconf Makefile.in's makefile targets are not supported
    in automake Makefile.ams/ins (e.g. get, clobber).
    10. Some automake standard targets are not propagated from toplevel and
    c/Makefile.am to autoconf subdirectories (eg. make dist).
    11. rpcgen generated files are not part of the source-tree (Automake
    conventions favor supplying generated files inside the source-tree,
    however there is no support for rpcgen generated files in automake, cf.
    yacc/lex support in automake).
    12. RTEMS_HAS_RDBG handling is flaky. make/*.cfg use RTEMS_HAS_RDBG per
    CPU, while librdb's sources can only be built per BSP. Raises the more
    general question whether librdbg located correctly in the source-tree.
    13. All make/*cfg files are configured per cpu, currently there is no
    location to store per-bsp configuration information --> bsp.cfg, per
    aconfig.h?
    14. "make install" without having run "make all" beforehand does not
    work.
    15. handling of --enable-multiprocessing seems to be broken in
    make/custom/*
    16. Makefile.ins still exploit many gmake features.
    17. File permisson chaos on libraries (no explict -m for
    libraries/rels/etc).
    18. mcp750 Makefiles are broken (Note: I *do* mean buggy - I am not
    talking about "not-conforming to  conventions", here :-).
    19. Dependencies between configure scripts are not handled, eg. aborting
    "make RTEMS_BSP=<bsp>" can leave the build-tree in an unusable state.
    20. "make clean" does not delete <build-tree>/<bsp>. This is intentional
    for now, because rerunning "make" after "make clean" requires an
    explicit "make preinstall" afterwards now. This should be done
    automatically, but doesn't work in this case for now. To work around
    this problem <build-tree>/<bsp> is kept during "make clean" for now
    (HACK).

    TODO:
    1. split out host-compiled bsp-tools
    2. Use Cygnus/GNU standards for cross-compiling target-subdir
    (CC=CC_FOR_TARGET .. configure --host=${target_alias}
    --build=`config.guess'}), to be added to toplevel configure script after
    splitting out bsp-tools.
    3. Exploit per cpu support directory (c/src/<cpu>)- Splitting out
    per-cpu libraries - Are there any?
    4. Further automake support
    5. Converting subdirectories into standalone / self-contained
    subdirectories (Esp. moving their headers to the same common root as
    their sources, eg. mv lib/include/rtems++
    lib/librtems++/include/rtems++) - This is the main obstacle which
    prevents moving further towards automake.
    6. Propagating values from *.cfg into Makefiles instead of propagating
    them at make time via Makefile-fragments (i.e. try to avoid using
    *.cfg).
    7. Testing on cygwin host (I *do* expect cygwin specific problems).
    8. The ARCH in o-$(ARCH)-$(VARIANT) build-subdirectories is not needed
    anymore.

    GENERAL ISSUES:
    1. Temporary installation tree -- Ian and I seem to disagree basically.
    Though I think that I understand his argumentation, I do not share it.
    IMO, his way of using the buildtree is mis-using the build-tree, relying
    on an inofficial feature of RTEMS's current implementation, which
    doesn't even work correctly in the current build-tree, though it
    attempts hard to do so. From my very POV, it unnecessarily complicates
    the structures of the source- and build-trees. It is not supported by
    automake (No automatic generation for the necessary rules) and
    complicates the transition to automake significantly (Generating the
    rules with an enhanced version of acpolish could be possible).
    As Ian correctly pointed out, here a management decision is needed -
    though I don't see the need to draw this decision in short terms.

    2. preinstallation generally is a sure means to spoil the structure of
    the source tree, IMHO (No ranting intended, I am completly serious about
    this one). eg. through tree dependencies. The worst problem related to
    this I have found in the meantime is bsp_specs. bsp_specs is part of
    libbsp, ie. there is *no* way to build *any* part of the source tree
    *without* having a BSP *preinstalled*.
    Note: This issue is related to issue 1., but is not identical - The
    difference is the change of the order make rules have to be triggered.
    While preinstallation triggers rules spread all over the source tree
    before a "make all" can be run, a temporary installation tree could also
    be installed by post "make all" hooks (all-local:, to be run after make
    all in a directory is completed) if the directories' dependencies would
    be a tree,

    3. Stuctural dependencies between subdirectories.
    4. Depth of the source tree (Prevents multilibbing and introduces many
    unnecessary configure scripts).
    5. per cpu vs. per bsp configuration (There are no real per-cpu parts
    yets :-).
    6. automake does not support $makefiles in AC_OUTPUT. Unlike before, we
    now should try to avoid RTEMS_CHECK_MAKEFILE and to hard-code as much
    paths to Makefiles as possible.
    7. General redesign of the source tree
    8. Main installation point - Changing it to ${prefix}/${target_alias}. ?

    Besides item 8. (which is a must, IMHO), as far as I see most of them
    can not be solved soon and will remain issues in the mid- to long-term
    :-.

    REMARKS:

    * You (as the maintainer) should always use --enable-maintainer-mode
    when building RTEMS to ensure that maintainer mode generated files (esp.
    those in c/src/make) will be updated when make/* files have changed.
    * Use @RTEMS_BSP@ in Makefile.ins and Makefile.ams below c/src/,
    $(RTEMS_BSP) or ${RTEMS_BSP} will be overridden from environment
    variables when using make RTEMS_BSP="....".
    * c/src/make is a temporary cludge until configuration issues are
    solved. At the moment it is configured per bsp, but contains
    per-target/cpu info only. Its main purpose now is to circumvent
    modifying make/*.cfg files, because I consider make/* to be frozen for
    backward compatibilty.
    * This patch should only affect configuration files. At least I do not
    remember having touched any source files.

    * To build the bare bsp you now need to mention it in --enable-rtemsbsp.

    Example: building gensh1 and sh1/bare simultaneously:
    ../rtems-rc-19990709-1/configure --target=sh-rtems \
    --enable-rtemsbsp="bare gensh1" \
    --prefix=/tmp/rtems \
    --enable-bare-cpu-cflags='-DMHZ=20 -m1
    -DCPU_CONSOLE_DEVNAME=\"/dev/null\"' \
    --enable-bare-cpu-model=sh7032 \
    --enable-maintainer-mode \
    --enable-cxx
    make
    make install

    * The next steps in development would be to split out bsp-tools and then
    to change to Cygnus/GNU canonicalization conventions for building the c/
    subdirectory afterwards (i.e. many standard AC_*.m4 macros could be used
    instead of customized versions)

    FINAL REMARK:
    The issues mentioned in the lists above sound much worser than the
    situation actually is. Most of them are not specific to this patch, but
    are also valid for the snapshot. I just wrote down what I came across
    when working on the patch over the last few weeks.

    I wouldn't be too surprised if you don't like the patch at the current
    point in development. I am willing to discuss details and problems, I
    also have no problem if you would post-pone applying this patch to times
    after 4.1, but rejecting it as a whole for all times would be a false
    management decision, IMHO.

    Therefore I would suggest that you, if your time constaints allow it,
    should at least play a little while with this patch to understand what
    is going on and  before drawing a decision on how to handle this
    proposal. I know this patch is neither perfect nor complete, but I
    consider it to be a major breakthrough.  Don't be anxious because of the
    size of the patch, the core of the patch is rather small, the size is
    mainly the side effect of some systematic cleanups inside the Makefiles
    (result of acpolish).

    Feel free to ask if you encounter problems, if you don't understand
    something or if you meet bugs - I am far from being perfect and am
    prepared to answer them.

    Ralf.

    --
    Ralf Corsepius
    Forschungsinstitut fuer Anwendungsorientierte Wissensverarbeitung (FAW)
    Helmholtzstr. 16, 89081 Ulm, Germany     Tel: +49/731/501-8690
    mailto:corsepiu@faw.uni-ulm.de           FAX: +49/731/501-999
    http://www.faw.uni-ulm.de

8 files changed, 2068 insertions, 0 deletions

diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/Makefile.am b/c/src/lib/libbsp/i386/ts_386ex/tools/Makefile.am
new file mode 100644
index 0000000000..54f0772a3b
--- /dev/null
+++ b/c/src/lib/libbsp/i386/ts_386ex/tools/Makefile.am
@@ -0,0 +1,19 @@
+#
+# $Id$
+#
+
+AUTOMAKE_OPTIONS = foreign 1.4
+ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
+
+noinst_SCRIPTS = \
+coff2bin
+
+SUBDIRS = \
+ts_1325_ada \
+dos_sup
+
+EXTRA_DIST = \
+$(noinst_SCRIPTS)
+
+include $(top_srcdir)/../../../../../../../automake/subdirs.am
+include $(top_srcdir)/../../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/aclocal.m4 b/c/src/lib/libbsp/i386/ts_386ex/tools/aclocal.m4
new file mode 100644
index 0000000000..7d2cb397fc
--- /dev/null
+++ b/c/src/lib/libbsp/i386/ts_386ex/tools/aclocal.m4
@@ -0,0 +1,261 @@
+dnl aclocal.m4 generated automatically by aclocal 1.4
+
+dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+dnl $Id$
+
+dnl
+dnl RTEMS_TOP($1)
+dnl 
+dnl $1 .. relative path from this configure.in to the toplevel configure.in
+dnl
+AC_DEFUN(RTEMS_TOP,
+[dnl
+AC_ARG_WITH(target-subdir,
+[  --with-target-subdir=DIR],
+TARGET_SUBDIR="$withval",
+TARGET_SUBDIR=".")
+
+RTEMS_TOPdir="$1";
+AC_SUBST(RTEMS_TOPdir)
+
+dnl Determine RTEMS Version string from the VERSION file
+dnl Hopefully, Joel never changes its format ;-
+AC_MSG_CHECKING([for RTEMS Version])
+if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then
+changequote(,)dnl
+RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \
+sed -e 's%RTEMS[ 	]*Version[ 	]*\(.*\)[ 	]*%\1%g'`
+changequote([,])dnl
+else
+AC_MSG_ERROR(Unable to find ${RTEMS_TOPdir}/VERSION)
+fi
+if test -z "$RTEMS_VERSION"; then
+AC_MSG_ERROR(Unable to determine version)
+fi
+AC_MSG_RESULT($RTEMS_VERSION)
+])dnl
+
+dnl
+dnl $Id$
+dnl
+
+dnl canonicalize target cpu
+dnl NOTE: Most rtems targets do not fullfil autoconf's
+dnl target naming conventions "processor-vendor-os"
+dnl Therefore autoconf's AC_CANONICAL_TARGET will fail for them
+dnl and we have to fix it for rtems ourselves 
+
+AC_DEFUN(RTEMS_CANONICAL_TARGET_CPU,
+[
+AC_CANONICAL_SYSTEM
+AC_MSG_CHECKING(rtems target cpu)
+changequote(,)dnl
+case "${target}" in
+  # hpux unix port should go here
+  i[3456]86-go32-rtems*)
+	RTEMS_CPU=i386
+	;;
+  i[3456]86-pc-linux*)		# unix "simulator" port
+	RTEMS_CPU=unix
+	;;
+  i[3456]86-*freebsd2*) 	# unix "simulator" port
+	RTEMS_CPU=unix
+	;;
+  no_cpu-*rtems*)
+        RTEMS_CPU=no_cpu
+	;;
+  sparc-sun-solaris*)           # unix "simulator" port
+	RTEMS_CPU=unix
+	;;
+  *) 
+	RTEMS_CPU=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'`
+	;;
+esac
+changequote([,])dnl
+AC_SUBST(RTEMS_CPU)
+AC_MSG_RESULT($RTEMS_CPU)
+])
+
+# Do all the work for Automake.  This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 1
+
+dnl Usage:
+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+AC_DEFUN(AM_INIT_AUTOMAKE,
+[AC_REQUIRE([AC_PROG_INSTALL])
+PACKAGE=[$1]
+AC_SUBST(PACKAGE)
+VERSION=[$2]
+AC_SUBST(VERSION)
+dnl test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+ifelse([$3],,
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
+dnl FIXME This is truly gross.
+missing_dir=`cd $ac_aux_dir && pwd`
+AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+AC_REQUIRE([AC_PROG_MAKE_SET])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+AC_DEFUN(AM_SANITY_CHECK,
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   if test "[$]*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftestfile`
+   fi
+   if test "[$]*" != "X $srcdir/configure conftestfile" \
+      && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "[$]2" = conftestfile
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+rm -f conftest*
+AC_MSG_RESULT(yes)])
+
+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+dnl The program must properly implement --version.
+AC_DEFUN(AM_MISSING_PROG,
+[AC_MSG_CHECKING(for working $2)
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if ($2 --version) < /dev/null > /dev/null 2>&1; then
+   $1=$2
+   AC_MSG_RESULT(found)
+else
+   $1="$3/missing $2"
+   AC_MSG_RESULT(missing)
+fi
+AC_SUBST($1)])
+
+# Add --enable-maintainer-mode option to configure.
+# From Jim Meyering
+
+# serial 1
+
+AC_DEFUN(AM_MAINTAINER_MODE,
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+  dnl maintainer-mode is disabled by default
+  AC_ARG_ENABLE(maintainer-mode,
+[  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer],
+      USE_MAINTAINER_MODE=$enableval,
+      USE_MAINTAINER_MODE=no)
+  AC_MSG_RESULT($USE_MAINTAINER_MODE)
+  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
+  MAINT=$MAINTAINER_MODE_TRUE
+  AC_SUBST(MAINT)dnl
+]
+)
+
+# Define a conditional.
+
+AC_DEFUN(AM_CONDITIONAL,
+[AC_SUBST($1_TRUE)
+AC_SUBST($1_FALSE)
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi])
+
+dnl
+dnl $Id$
+dnl 
+
+AC_DEFUN(RTEMS_PROJECT_ROOT,
+[dnl
+AC_REQUIRE([RTEMS_TOP])
+if test "$TARGET_SUBDIR" = "." ; then
+PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)';
+else
+PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)'
+fi
+AC_SUBST(PROJECT_ROOT)
+
+RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP
+AC_SUBST(RTEMS_ROOT)
+
+INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change"
+AC_SUBST(INSTALL_CHANGE)
+
+PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex"
+AC_SUBST(PACKHEX)
+])
+
+
+AC_DEFUN(RTEMS_TOOLPATHS,
+[
+# tooldir='$(exec_prefix)/'$target_alias
+# Temporary work-around until building in source tree is supported
+AC_REQUIRE([RTEMS_PROJECT_ROOT])
+
+tooldir='$(PROJECT_ROOT)'
+AC_SUBST(tooldir)
+
+project_includedir='$(tooldir)'/include
+AC_SUBST(project_includedir)
+
+project_libdir='$(tooldir)/lib$(MULTISUBDIR)'
+AC_SUBST(project_libdir)
+
+project_bindir='$(tooldir)/bin'
+AC_SUBST(project_bindir)
+
+rtems_bspdir='$(prefix)/${RTEMS_BSP}'
+AC_SUBST(rtems_bspdir)
+rtems_makedir='$(prefix)/make'
+AC_SUBST(rtems_makedir)
+])
+
diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/configure b/c/src/lib/libbsp/i386/ts_386ex/tools/configure
new file mode 100644
index 0000000000..ec4e397580
--- /dev/null
+++ b/c/src/lib/libbsp/i386/ts_386ex/tools/configure
@@ -0,0 +1,1284 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.13 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+  --with-target-subdir=DIR"
+ac_help="$ac_help
+  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer"
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.13"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=coff2bin
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+ac_aux_dir=
+for ac_dir in ../../../../../../.. $srcdir/../../../../../../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in ../../../../../../.. $srcdir/../../../../../../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Check whether --with-target-subdir or --without-target-subdir was given.
+if test "${with_target_subdir+set}" = set; then
+  withval="$with_target_subdir"
+  TARGET_SUBDIR="$withval"
+else
+  TARGET_SUBDIR="."
+fi
+
+
+RTEMS_TOPdir="../../../../../../..";
+
+
+echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6
+echo "configure:563: checking for RTEMS Version" >&5
+if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then
+RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \
+sed -e 's%RTEMS[ 	]*Version[ 	]*\(.*\)[ 	]*%\1%g'`
+else
+{ echo "configure: error: Unable to find ${RTEMS_TOPdir}/VERSION" 1>&2; exit 1; }
+fi
+if test -z "$RTEMS_VERSION"; then
+{ echo "configure: error: Unable to determine version" 1>&2; exit 1; }
+fi
+echo "$ac_t""$RTEMS_VERSION" 1>&6
+
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:604: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:625: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:643: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6
+echo "configure:666: checking rtems target cpu" >&5
+case "${target}" in
+  # hpux unix port should go here
+  i[3456]86-go32-rtems*)
+	RTEMS_CPU=i386
+	;;
+  i[3456]86-pc-linux*)		# unix "simulator" port
+	RTEMS_CPU=unix
+	;;
+  i[3456]86-*freebsd2*) 	# unix "simulator" port
+	RTEMS_CPU=unix
+	;;
+  no_cpu-*rtems*)
+        RTEMS_CPU=no_cpu
+	;;
+  sparc-sun-solaris*)           # unix "simulator" port
+	RTEMS_CPU=unix
+	;;
+  *) 
+	RTEMS_CPU=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'`
+	;;
+esac
+
+echo "$ac_t""$RTEMS_CPU" 1>&6
+
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:704: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+echo "configure:757: checking whether build environment is sane" >&5
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftestfile`
+   fi
+   if test "$*" != "X $srcdir/configure conftestfile" \
+      && test "$*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" 1>&2; exit 1; }
+   fi
+
+   test "$2" = conftestfile
+   )
+then
+   # Ok.
+   :
+else
+   { echo "configure: error: newly created file is older than distributed files!
+Check your system clock" 1>&2; exit 1; }
+fi
+rm -f conftest*
+echo "$ac_t""yes" 1>&6
+if test "$program_transform_name" = s,x,x,; then
+  program_transform_name=
+else
+  # Double any \ or $.  echo might interpret backslashes.
+  cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+  rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:814: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftestmake <<\EOF
+all:
+	@echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  SET_MAKE=
+else
+  echo "$ac_t""no" 1>&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+PACKAGE=rtems-lib-libbsp-i386-ts_386ex-tools
+
+VERSION=$RTEMS_VERSION
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+
+
+
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:853: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+   ACLOCAL=aclocal
+   echo "$ac_t""found" 1>&6
+else
+   ACLOCAL="$missing_dir/missing aclocal"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:866: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+   AUTOCONF=autoconf
+   echo "$ac_t""found" 1>&6
+else
+   AUTOCONF="$missing_dir/missing autoconf"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:879: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+   AUTOMAKE=automake
+   echo "$ac_t""found" 1>&6
+else
+   AUTOMAKE="$missing_dir/missing automake"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:892: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+   AUTOHEADER=autoheader
+   echo "$ac_t""found" 1>&6
+else
+   AUTOHEADER="$missing_dir/missing autoheader"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:905: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+   MAKEINFO=makeinfo
+   echo "$ac_t""found" 1>&6
+else
+   MAKEINFO="$missing_dir/missing makeinfo"
+   echo "$ac_t""missing" 1>&6
+fi
+
+
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:919: checking whether to enable maintainer-specific portions of Makefiles" >&5
+    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval="$enable_maintainer_mode"
+  USE_MAINTAINER_MODE=$enableval
+else
+  USE_MAINTAINER_MODE=no
+fi
+
+  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+  
+
+if test $USE_MAINTAINER_MODE = yes; then
+  MAINTAINER_MODE_TRUE=
+  MAINTAINER_MODE_FALSE='#'
+else
+  MAINTAINER_MODE_TRUE='#'
+  MAINTAINER_MODE_FALSE=
+fi
+  MAINT=$MAINTAINER_MODE_TRUE
+  
+
+
+
+if test "$TARGET_SUBDIR" = "." ; then
+PROJECT_ROOT=$RTEMS_TOPdir/'$(top_builddir)';
+else
+PROJECT_ROOT=../$RTEMS_TOPdir/'$(top_builddir)'
+fi
+
+
+RTEMS_ROOT=$RTEMS_TOPdir/'$(top_builddir)'/c/$RTEMS_BSP
+
+
+INSTALL_CHANGE="\$(KSH) \$(PROJECT_ROOT)/tools/build/install-if-change"
+
+
+PACKHEX="\$(PROJECT_ROOT)/tools/build/packhex"
+
+
+
+# tooldir='$(exec_prefix)/'$target_alias
+# Temporary work-around until building in source tree is supported
+
+
+tooldir='$(PROJECT_ROOT)'
+
+
+project_includedir='$(tooldir)'/include
+
+
+project_libdir='$(tooldir)/lib$(MULTISUBDIR)'
+
+
+project_bindir='$(tooldir)/bin'
+
+
+rtems_bspdir='$(prefix)/${RTEMS_BSP}'
+
+rtems_makedir='$(prefix)/make'
+
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.13"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "Makefile
+dos_sup/Makefile
+ts_1325_ada/Makefile
+" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@RTEMS_TOPdir@%$RTEMS_TOPdir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@RTEMS_CPU@%$RTEMS_CPU%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@PACKAGE@%$PACKAGE%g
+s%@VERSION@%$VERSION%g
+s%@ACLOCAL@%$ACLOCAL%g
+s%@AUTOCONF@%$AUTOCONF%g
+s%@AUTOMAKE@%$AUTOMAKE%g
+s%@AUTOHEADER@%$AUTOHEADER%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
+s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
+s%@MAINT@%$MAINT%g
+s%@PROJECT_ROOT@%$PROJECT_ROOT%g
+s%@RTEMS_ROOT@%$RTEMS_ROOT%g
+s%@INSTALL_CHANGE@%$INSTALL_CHANGE%g
+s%@PACKHEX@%$PACKHEX%g
+s%@tooldir@%$tooldir%g
+s%@project_includedir@%$project_includedir%g
+s%@project_libdir@%$project_libdir%g
+s%@project_bindir@%$project_bindir%g
+s%@rtems_bspdir@%$rtems_bspdir%g
+s%@rtems_makedir@%$rtems_makedir%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile
+dos_sup/Makefile
+ts_1325_ada/Makefile
+"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  case "$ac_given_INSTALL" in
+  [/$]*) INSTALL="$ac_given_INSTALL" ;;
+  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+  esac
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/configure.in b/c/src/lib/libbsp/i386/ts_386ex/tools/configure.in
new file mode 100644
index 0000000000..2fca229ae0
--- /dev/null
+++ b/c/src/lib/libbsp/i386/ts_386ex/tools/configure.in
@@ -0,0 +1,21 @@
+dnl Process this file with autoconf to produce a configure script.
+dnl
+dnl  $Id$
+
+AC_INIT(coff2bin)
+AC_CONFIG_AUX_DIR(../../../../../../..)
+
+RTEMS_TOP(../../../../../../..)
+RTEMS_CANONICAL_TARGET_CPU
+
+AM_INIT_AUTOMAKE(rtems-lib-libbsp-i386-ts_386ex-tools,$RTEMS_VERSION,no)
+AM_MAINTAINER_MODE
+
+RTEMS_PROJECT_ROOT
+RTEMS_TOOLPATHS
+
+AC_OUTPUT( 
+Makefile
+dos_sup/Makefile
+ts_1325_ada/Makefile
+)
diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/dos_sup/Makefile.am b/c/src/lib/libbsp/i386/ts_386ex/tools/dos_sup/Makefile.am
new file mode 100644
index 0000000000..5980f6aaf6
--- /dev/null
+++ b/c/src/lib/libbsp/i386/ts_386ex/tools/dos_sup/Makefile.am
@@ -0,0 +1,12 @@
+#
+# $Id$
+#
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+EXTRA_DIST = \
+loader.com \
+loader_hybrid_com.asm \
+ts1325.inc
+
+include $(top_srcdir)/../../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/dos_sup/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/tools/dos_sup/Makefile.in
new file mode 100644
index 0000000000..728f999841
--- /dev/null
+++ b/c/src/lib/libbsp/i386/ts_386ex/tools/dos_sup/Makefile.in
@@ -0,0 +1,225 @@
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+#
+# $Id$
+#
+
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
+project_bindir = @project_bindir@
+project_includedir = @project_includedir@
+project_libdir = @project_libdir@
+rtems_bspdir = @rtems_bspdir@
+rtems_makedir = @rtems_makedir@
+tooldir = @tooldir@
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+EXTRA_DIST =  loader.com loader_hybrid_com.asm ts1325.inc
+
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign dos_sup/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = dos_sup
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign dos_sup/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+debug_install-am:
+debug_install: debug_install-am
+.PHONY: debug_install debug_install-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+profile_install-am:
+profile_install: profile_install-am
+.PHONY: profile_install profile_install-am
+
+preinstall-am:
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+clobber-am:
+clobber: clobber-am
+.PHONY: clobber clobber-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/Makefile.am b/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/Makefile.am
new file mode 100644
index 0000000000..e805d2c83f
--- /dev/null
+++ b/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/Makefile.am
@@ -0,0 +1,21 @@
+# 
+# $Id$
+#
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+EXTRA_DIST = \
+Makefile.ts_386ex \
+ts1325-button.adb  \
+ts1325-parallel.adb \
+i386_ports.adb \
+ts1325-button.ads \
+ts1325-parallel.ads \
+i386_ports.ads \
+ts1325-led.adb \
+ts1325.ads \
+init.c \
+ts1325-led.ads \
+ts1325_test.adb
+
+include $(top_srcdir)/../../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/Makefile.in b/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/Makefile.in
new file mode 100644
index 0000000000..b218096166
--- /dev/null
+++ b/c/src/lib/libbsp/i386/ts_386ex/tools/ts_1325_ada/Makefile.in
@@ -0,0 +1,225 @@
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# 
+# $Id$
+#
+
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+INSTALL_CHANGE = @INSTALL_CHANGE@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PACKHEX = @PACKHEX@
+PROJECT_ROOT = @PROJECT_ROOT@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+VERSION = @VERSION@
+project_bindir = @project_bindir@
+project_includedir = @project_includedir@
+project_libdir = @project_libdir@
+rtems_bspdir = @rtems_bspdir@
+rtems_makedir = @rtems_makedir@
+tooldir = @tooldir@
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+EXTRA_DIST =  Makefile.ts_386ex ts1325-button.adb  ts1325-parallel.adb i386_ports.adb ts1325-button.ads ts1325-parallel.ads i386_ports.ads ts1325-led.adb ts1325.ads init.c ts1325-led.ads ts1325_test.adb
+
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am
+	cd $(top_srcdir) && $(AUTOMAKE) --foreign ts_1325_ada/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = ts_1325_ada
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign ts_1325_ada/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-generic clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+debug-am:
+debug: debug-am
+.PHONY: debug debug-am
+
+debug_install-am:
+debug_install: debug_install-am
+.PHONY: debug_install debug_install-am
+
+profile-am:
+profile: profile-am
+.PHONY: profile profile-am
+
+profile_install-am:
+profile_install: profile_install-am
+.PHONY: profile_install profile_install-am
+
+preinstall-am:
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+clobber-am:
+clobber: clobber-am
+.PHONY: clobber clobber-am
+
+depend-am:
+depend: depend-am
+.PHONY: depend depend-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: