bsps: Move flash.c to bsps

This patch is a part of the BSP source reorganization.

Update #3285.

3 files changed, 2 insertions, 911 deletions

diff --git a/c/src/lib/libbsp/powerpc/beatnik/Makefile.am b/c/src/lib/libbsp/powerpc/beatnik/Makefile.am
index 4fc73b7082..d9bbf86aad 100644
--- a/c/src/lib/libbsp/powerpc/beatnik/Makefile.am
+++ b/c/src/lib/libbsp/powerpc/beatnik/Makefile.am
@@ -71,7 +71,7 @@ librtemsbsp_a_SOURCES += marvell/gti2c.c
 librtemsbsp_a_SOURCES += marvell/gt_timer.c
 
 #flash
-librtemsbsp_a_SOURCES += ../shared/flash/flash.c
+librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/shared/flash/flash.c
 librtemsbsp_a_SOURCES += ../shared/flash/intelFlash.c
 librtemsbsp_a_SOURCES += flash/flashcfg.c
 
diff --git a/c/src/lib/libbsp/powerpc/mvme3100/Makefile.am b/c/src/lib/libbsp/powerpc/mvme3100/Makefile.am
index 7beab1e25f..cc4f37e946 100644
--- a/c/src/lib/libbsp/powerpc/mvme3100/Makefile.am
+++ b/c/src/lib/libbsp/powerpc/mvme3100/Makefile.am
@@ -69,7 +69,7 @@ librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/shared/pci/generic_clear
 librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/shared/pci/pcifinddevice.c
 
 # flash
-librtemsbsp_a_SOURCES += ../shared/flash/flash.c
+librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/shared/flash/flash.c
 librtemsbsp_a_SOURCES += ../shared/flash/spansionFlash.c
 librtemsbsp_a_SOURCES += flash/flashcfg.c
 
diff --git a/c/src/lib/libbsp/powerpc/shared/flash/flash.c b/c/src/lib/libbsp/powerpc/shared/flash/flash.c
deleted file mode 100644
index b7f167875a..0000000000
--- a/c/src/lib/libbsp/powerpc/shared/flash/flash.c
+++ /dev/null
@@ -1,909 +0,0 @@
-/* Trivial Flash Programmer                                  */
-
-/* Author: Till Straumann <strauman@slac.stanford.edu>, 2006 */
-
-/* To keep things simple, this driver makes a few assumptions about the
- * hardware:
- *
- * - no CFI
- * - devices operate with 16-bit data width
- * - two devices are used in parallel (stride 4) to
- *   provide 32-bit data. I.e., the devices are
- *   organized like this:
- *   unsigned short flash[FLASH_SIZE][2];
- * - no endianness issues (i.e., flash endianness ==  CPU endianness)
- * - fixed block size
- * - fixed buffer size
- * - all devices in a bank are identical
- * - NOT THREAD SAFE; no locking scheme is implemented.
- * - cannot copy within same flash bank.
- * - timeout uses polling/busy-wait.
- *
- * NOTE: some attempts have been made to remove the restrictions
- * on stride and 16-bit width with the goal to support widths 1/2 (bytes)
- * and strides 1/2/4 and all (legal) combinations thereof.
- * However, the intel chip driver only implements stride 4 / width 2
- * and other combinations are untested.
- */
-
-/*
- * Authorship
- * ----------
- * This software was created by
- *     Till Straumann <strauman@slac.stanford.edu>, 2005-2007,
- * 	   Stanford Linear Accelerator Center, Stanford University.
- *
- * Acknowledgement of sponsorship
- * ------------------------------
- * The software was produced by
- *     the Stanford Linear Accelerator Center, Stanford University,
- * 	   under Contract DE-AC03-76SFO0515 with the Department of Energy.
- *
- * Government disclaimer of liability
- * ----------------------------------
- * Neither the United States nor the United States Department of Energy,
- * nor any of their employees, makes any warranty, express or implied, or
- * assumes any legal liability or responsibility for the accuracy,
- * completeness, or usefulness of any data, apparatus, product, or process
- * disclosed, or represents that its use would not infringe privately owned
- * rights.
- *
- * Stanford disclaimer of liability
- * --------------------------------
- * Stanford University makes no representations or warranties, express or
- * implied, nor assumes any liability for the use of this software.
- *
- * Stanford disclaimer of copyright
- * --------------------------------
- * Stanford University, owner of the copyright, hereby disclaims its
- * copyright and all other rights in this software.  Hence, anyone may
- * freely use it for any purpose without restriction.
- *
- * Maintenance of notices
- * ----------------------
- * In the interest of clarity regarding the origin and status of this
- * SLAC software, this and all the preceding Stanford University notices
- * are to remain affixed to any copy or derivative of this software made
- * or distributed by the recipient and are to be affixed to any copy of
- * software made or distributed by the recipient that contains a copy or
- * derivative of this software.
- *
- * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
- */
-#ifndef TESTING
-#include <rtems.h>
-#include <bsp/flashPgm.h>
-#include <bsp/flashPgmPvt.h>
-#else
-#include "flashPgm.h"
-#include "flashPgmPvt.h"
-#endif
-
-#include <unistd.h>
-#include <stdio.h>
-#include <inttypes.h>
-#include <ctype.h>
-#include <fcntl.h>
-#include <stdlib.h>
-
-#define  DEBUG		0
-#undef   DEBUG
-
-#ifdef   DEBUG
-#define  STATIC
-#else
-#define  STATIC				static
-#endif
-
-/* Forward decls. */
-
-STATIC uint32_t
-BSP_flashProbeSize(struct bankdesc *b);
-
-STATIC struct bankdesc *
-bankValidate(int bank, int quiet);
-
-static struct bankdesc *
-argcheck(int bank, uint32_t offset, const char *src, uint32_t size);
-
-/* Type definitions */
-
-union bconv	{
-	uint32_t u;
-	uint16_t s[2];
-	char     c[4];
-};
-
-/* Little helpers... */
-
-/* Read parallel devices */
-static void
-rd_par(struct bankdesc *b, union bconv *pv, uint32_t a)
-{
-	if ( 4 == FLASH_STRIDE(b) ) {
-		pv->u    = *(_u32_a_t*)a;
-	} else if ( 2 == FLASH_STRIDE(b) ) {
-		pv->s[0] = *(_u16_a_t*)a;
-	} else {
-		pv->c[0] = *(_u8_a_t*)a;
-	}
-}
-
-/* 'flush' input buffer and get an upper-case char from stdin */
-STATIC int
-getUc(void)
-{
-	fseek(stdin, 0, SEEK_END);
-	return toupper(getchar());
-}
-
-/* Advance rotating progress indicator on stdout.
- * The idea is that the caller updates a state variable
- * using 'flip':
- *
- * unsigned f = 0;
- *
- *    // advance indicator
- *    f = flip(f);
- *
- *    ...
- *
- *    // erase indicator
- *    wipe(f);
- */
-static unsigned flip(unsigned x)
-{
-static char bar[]= { '/', '-', '\\', '|' };
-	putchar('\b');
-	putchar(bar[ x & 3]);
-	fflush(stdout);
-	return x+1;
-}
-
-/* If f!=0 then erase one char on stdout.
- * ( If 'flip' was never called then f should still
- * be zero and no action is taken).
- */
-static void wipe(unsigned f)
-{
-	if ( f ) {
-		putchar('\b');
-		putchar(' ');
-		putchar('\b');
-		fflush(stdout);
-	}
-}
-
-/* lookup vendor ID in table of known vendors using ops
- * associated with the vendor.
- */
-STATIC struct vendesc *
-knownVendor(struct bankdesc *b, uint32_t addr, uint32_t *pd, unsigned quiet)
-{
-uint32_t        v;
-struct vendesc *rval;
-
-	for ( rval=b->knownVendors; rval->name; rval++ ) {
-
-		if ( rval->ops->get_id(b, addr, &v, pd) ) {
-			if ( quiet < 2 )
-				fprintf(stderr,"Unable to read vendor/device info at 0x%08"PRIx32"\n", addr);
-			return 0;
-		}
-
-		if ( rval->id == v ) {
-			return rval;
-		}
-	}
-	if ( quiet < 2 )
-		fprintf(stderr,"Unknown vendor id (0x%04"PRIx32") at 0x%08"PRIx32"\n",v, addr);
-	return 0;
-}
-
-/* lookup device ID in table of known devices */
-STATIC struct devdesc *
-knownDevice(struct vendesc *v, uint32_t d)
-{
-struct devdesc *rval;
-	for ( rval=v->known_devs; rval->name; rval++ ) {
-		if ( rval->id == d ) {
-			return rval;
-		}
-	}
-	return 0;
-}
-
-/* Write 'n_words' (32-bit) from 'src' to 'addr'ess on flash.
- * (src is a char* to emphasize that no src-alignment is required)
- *
- * RETURNS: 0 on success, (destination) address of failure on error.
- *
- *   NOTES: - device switched back to array mode on exit.
- *          - 'addr' must be 32-bit aligned.
- */
-
-STATIC uint32_t
-BSP_flashWriteDataRaw(struct bankdesc *b, uint32_t addr, const char *src, uint32_t n_words, int quiet)
-{
-uint32_t   sta;
-uint32_t   N;
-uint32_t   nxt, a, i, bufsz;
-uint32_t   then, now;
-unsigned   f;
-const char *s;
-
-#ifdef DEBUG
-	printf("\nflashWriteDataRaw(0x%08"PRIx32", %p, 0x%"PRIx32")\n", addr, src, n_words);
-#endif
-
-	if ( 0 == n_words ) {
-		return 0;
-	}
-
-	if ( !b ) {
-		fprintf(stderr,"Missing bank descriptor argument\n");
-		return -1;
-	}
-	if ( !b->dd ) {
-		fprintf(stderr,"Bank descriptor not initialized\n");
-		return -1;
-	}
-
-	if ( addr & (FLASH_STRIDE(b)-1) ) {
-		fprintf(stderr,"Misaligned address (not on word boundary) 0x%08"PRIx32"\n", addr);
-		return -1;
-	}
-
-	if ( (sta = b->ops->check_ready(b, addr)) ) {
-		/* Error msgs have already been printed */
-		return addr;
-	}
-
-	bufsz = FLASH_NDEVS(b) * b->dd->bufsz;
-
-	then = BSP_flashBspOps.read_us_timer();
-
-	for ( f = 0, a = addr, s=src, i = n_words; i ; s+=N ) {
-		/* start of next buffer */
-		nxt = (a + bufsz) & ~(bufsz-1);
-
-		/* number of bytes */
-		N = (nxt - a);
-
-		if ( N > i * FLASH_STRIDE(b) )
-			N = i * FLASH_STRIDE(b);
-
-		i -= N/FLASH_STRIDE(b);
-
-		if ( (sta = b->ops->write_line(b, a, s, N)) )
-			goto bail;
-
-		if ( ! quiet && (now = BSP_flashBspOps.read_us_timer()) - then > 500000 ) {
-			f = flip(f);
-			then = now;
-		}
-
-		a = nxt;
-	}
-
-	sta = 0;
-
-	/* verify */
-	for ( i=0, a=addr; i < n_words * FLASH_STRIDE(b); i++, a++ ) {
-		if ( *(char*)a != src[i] ) {
-			sta = -2;
-			goto bail;
-		}
-	}
-
-bail:
-	if ( ! quiet ) {
-		wipe(f);
-	}
-	if ( sta ) {
-		switch ( sta ) {
-			default:
-				fprintf(stderr,"Error (flashWriteDataRaw): write error\n");
-				b->ops->print_stat(b, sta,0);
-			break;
-
-			case -1:
-				fprintf(stderr,"Error (flashWriteDataRaw): Timeout\n");
-			break;
-
-			case -2:
-				fprintf(stderr,"Error (flashWriteDataRaw): write verification failed at 0x%08"PRIx32"\n", a);
-			break;
-		}
-		b->ops->array_mode(b, a);
-	} else {
-		/* no errors */
-		a = 0;
-	}
-	return a;
-}
-
-
-/* Query device for basic information verifying that we talk
- * to a 'known'/'supported' device.
- *
- * This is not really clean since (until we implement CFI)
- * we already need to know what kind of device it is to
- * be able to read its ID...
- *
- *   NOTES: - device switched back to array mode on exit.
- *          - 'addr' must be 32-bit aligned.
- */
-
-STATIC struct devdesc *
-BSP_flashCheckId(struct bankdesc *b, uint32_t addr, unsigned quiet)
-{
-uint8_t  x;
-uint32_t d;
-struct vendesc  *vd;
-struct devdesc  *dd;
-
-	/* check if it's flash at all: */
-	x = *(A8)addr;
-	*(A8)addr = ~x;
-	if ( x != *(A8)addr ) {
-		/* restore */
-		*(A8)addr = x;
-		if ( quiet < 3 )
-			fprintf(stderr,"Addr 0x%08"PRIx32" seems to be RAM!\n", addr);
-		return 0;
-	}
-
-	if ( !(vd = knownVendor(b, addr, &d, quiet)) ) {
-		return 0;
-	}
-
-	/* Use the vendor ops for this bank */
-	b->ops    = vd->ops;
-
-	if ( !quiet )
-		printf("Flash device, vendor: %s", vd->name);
-
-	if ( !(dd = knownDevice(vd, d)) ) {
-		if ( !quiet )
-			printf("\n");
-		if ( quiet < 2 )
-			fprintf(stderr,"Unknown device id (0x%04"PRIx32") at 0x%08"PRIx32"\n",d, addr);
-		return 0;
-	}
-
-	/* logical sector size is device sector size
-	 * multiplied by # of devices in parallel
-	 */
-	b->fblksz = dd->fblksz * FLASH_NDEVS(b);
-
-	if ( !quiet )
-		printf(", device: %s -- size 0x%08"PRIx32" bytes\n", dd->name, dd->size);
-	return dd;
-}
-
-/* We don't have device info yet so just
- * use 64k alignment
- */
-#define SCAN_BACK_OFFSET	0x10000
-
-/* Scan address range for flash devices and compute total size
- * of bank.
- *
- * RETURNS: size in bytes.
- */
-STATIC uint32_t
-BSP_flashProbeSize(struct bankdesc *b)
-{
-int             max = b->max_size;
-uint32_t		rval;
-struct devdesc	*dd;
-unsigned		q;
-	if ( max > 0 ) {
-		for ( rval = 0, q=1; rval < max && (dd = BSP_flashCheckId(b, b->start + rval, q)); q=3 ) {
-			rval += dd->size * FLASH_NDEVS(b);
-		}
-	} else {
-		/* bank is populated from the top; scan backwards */
-		max = -max;
-		for ( rval = 0, q=1; rval < max && (dd = BSP_flashCheckId(b, b->start + max - SCAN_BACK_OFFSET - rval, q)); q=3 ) {
-			rval += dd->size * FLASH_NDEVS(b);
-		}
-		b->start += max - rval;
-	}
-	return rval;
-}
-
-uint32_t
-BSP_flashStart(int bank)
-{
-struct bankdesc *b;
-	if ( ! ( b = argcheck(bank, 0, 0, 0) ) )
-		return -1;
-	return b->start;
-}
-
-uint32_t
-BSP_flashSize(int bank)
-{
-struct bankdesc *b;
-	if ( ! ( b = argcheck(bank, 0, 0, 0) ) )
-		return -1;
-	return b->size;
-}
-
-uint32_t
-BSP_flashBlockSize(int bank)
-{
-struct bankdesc *b;
-	if ( ! ( b = argcheck(bank, 0, 0, 0) ) )
-		return -1;
-	return b->fblksz;
-}
-
-
-#ifndef TESTING
-
-/* Obtain bank description making sure it is initialized and not write protected */
-STATIC struct bankdesc *
-bankValidate(int bank, int quiet)
-{
-struct bankdesc *b = BSP_flashBspOps.bankcheck(bank, quiet);
-
-	/* If flash is write-protected then we can't even talk to it... */
-	if ( BSP_flashBspOps.flash_wp(bank, -1) ) {
-		fprintf(stderr,"Flash bank #%i is write-protected; use 'BSP_flashWriteEnable(int bank)' and/or jumper\n", bank);
-		return 0;
-	}
-
-	if ( !b->size && !(b->size = BSP_flashProbeSize(b)) ) {
-		fprintf(stderr,"Configuration Error - unable to determine flash size\n");
-		return 0;
-	}
-
-	if ( !b->dd && !(b->dd = BSP_flashCheckId(b, b->start,1)) ) {
-		fprintf(stderr,"Error: unable to detect flash device in bank #%i\n", bank);
-		return 0;
-	}
-	return b;
-}
-
-/* Validate arguments and write-protection status of 'bank'.
- *
- *    'bank': 0..max bank supported by board.
- *  'offset': 0..bank size - 1
- *     'src': src .. src + size - 1 must not overlap bank; 'src' may be NULL
- *            (check is skipped in this case)
- *
- *      RETURNS: pointer to bank description on success, NULL on error (invalid args;
- *               error message is printed to stderr).
- *
- * SIDE EFFECTS: probes for bank size and stores result in bank description table.
- */
-
-static struct bankdesc *
-argcheck(int bank, uint32_t offset, const char *src, uint32_t size)
-{
-struct bankdesc *b;
-
-	if ( !(b=bankValidate(bank, 0)) ) {
-		return 0;
-	}
-
-	if ( offset + size > b->size ) {
-		fprintf(stderr,"Error: requested size exceeds available flash (0x%08"PRIx32" bytes)\n", b->size);
-		return 0;
-	}
-
-	if ( src && ( src + size > (char*)b->start && src < (char*)(b->start + b->size) ) ) {
-		fprintf(stderr,"Error: cannot copy data within flash bank\n");
-		return 0;
-	}
-
-
-	return b;
-}
-
-/* Calculate region that needs to be erased from 'offset' and 'n_bytes'
- * handling alignment and checking for blank areas that need not be
- * erased.
- * Ask for user confirmation and erase calculated region.
- *
- * RETURNS: 0 on success, -1 or destination address on error.
- *
- *   NOTES: - device switched back to array mode on exit.
- *          - prints progress/messages.
- */
-STATIC int
-regionCheckAndErase(int bank, uint32_t offset, const char *src, uint32_t n_bytes, int quiet)
-{
-struct bankdesc *b;
-uint32_t         i;
-char            *p;
-uint32_t		a,e;
-
-	if ( ! (b = argcheck(bank, offset, src, n_bytes)) )
-		return -1;
-
-	a = offset & ~(b->fblksz - 1);
-	e = (offset + n_bytes +  b->fblksz - 1) & ~ (b->fblksz - 1);
-
-	/* If 'offset' is not block-aligned then rest of the block must
-	 * be free.
-	 */
-	if ( a != offset ) {
-		a += b->fblksz;
-		i  = ( a > offset + n_bytes ) ? offset + n_bytes : a;
-		for ( p = (char*)(b->start + offset); p < (char*)(b->start + i); p++ ) {
-			if ( (char)0xff != *p ) {
-				if ( ! quiet ) {
-					fprintf(stderr,"Starting offset not block-aligned and destination area not empty.\n");
-					fprintf(stderr,"I'll need to erase data below destination start\n");
-				}
-				a -= b->fblksz;
-				break;
-			}
-		}
-	}
-	if ( e != offset + n_bytes ) {
-		e -= b->fblksz;
-		i  = ( e < offset ) ? offset : e;
-		for ( p = (char*)(b->start + i); p < (char*)(b->start + offset + n_bytes); p++ ) {
-			if ( (char)0xff != *p ) {
-				if ( ! quiet ) {
-					fprintf(stderr,"Ending offset not block-aligned and destination area not empty.\n");
-					fprintf(stderr,"I'll need to erase data beyond destination end\n");
-				}
-				e += b->fblksz;
-				break;
-			}
-		}
-	}
-	if ( ! quiet ) {
-		if ( e > a )
-			printf("ERASING 0x%08"PRIx32" .. 0x%08"PRIx32"\n", (b->start+a), (b->start + e - 1));
-		printf("WRITING 0x%08"PRIx32" .. 0x%08"PRIx32"\n", (b->start+offset), (b->start + offset + n_bytes - 1));
-		printf("OK to proceed y/[n]?"); fflush(stdout);
-		if ( 'Y' != getUc() ) {
-			printf("ABORTED\n");
-			return -1;
-		}
-	}
-	if ( e > a ) {
-		if ( quiet < 2 ) {
-			printf("ERASING  "); fflush(stdout);
-		}
-
-		if ( (i = BSP_flashErase(bank, a, e-a, quiet ? quiet : 1)) )
-			return i;
-
-		if ( quiet < 2 ) {
-			printf("DONE\n");
-		}
-	}
-
-	return 0;
-}
-
-/* Write to a flash region ('offset'..'offset'+'n_bytes'-1 on 'bank').
- *
- * RETURNS: 0 on success, -1 or destination address on error.
- *
- *   NOTES: - device switched back to array mode on exit.
- *          - no erase operation is performed.
- *          - written data is verified against source.
- */
-
-STATIC int
-BSP_flashWriteRegion(int bank, uint32_t offset, const char *src, uint32_t n_bytes, int quiet)
-{
-struct bankdesc *b = BSP_flashBspOps.bankcheck(bank, 0);	/* caller did bankValidate() */
-uint32_t     ab = offset & ~(b->fblksz - 1);
-uint32_t     eb = (offset + n_bytes + b->fblksz - 1) & ~(b->fblksz - 1);
-uint32_t     o,i,a,e;
-int          err;
-const char   *p;
-union bconv  buf;
-
-	/* unlock */
-	for ( i=ab; i<eb; i+=b->fblksz ) {
-		b->ops->unlock_block(b, b->start + i );
-	}
-
-	err = 0;
-	p = src;
-
-	/* handle misaligned offset merging old contents */
-	o = b->start + offset;
-	a = o & ~(FLASH_STRIDE(b)-1);
-	e = (o + n_bytes) & ~(FLASH_STRIDE(b)-1);
-
-	if ( o > a ) {
-		i = o - a;
-
-		rd_par(b, &buf, a);
-
-		while ( i < FLASH_STRIDE(b) && p < src + n_bytes ) {
-			buf.c[i++] = *p++;
-		}
-		if ( (err = BSP_flashWriteDataRaw(b, a, buf.c, 1, quiet)) )
-			goto bail;
-		a += FLASH_STRIDE(b);
-	}
-
-
-	/* caution if misaligned data covering only one or two words */
-
-	if ( e > a ) {
-		i = (e-a);
-		if ( (err = BSP_flashWriteDataRaw(b, a, p, i/FLASH_STRIDE(b), quiet)) )
-			goto bail;
-		p += i;
-	}
-
-	/* handle misaligned end */
-	if ( o + n_bytes > e)  {
-		rd_par(b, &buf, e);
-		for ( i=0; p < src + n_bytes; ) {
-			buf.c[i++] = *p++;
-		}
-		if ( (err = BSP_flashWriteDataRaw(b, e, buf.c, 1, quiet)) )
-			goto bail;
-	}
-
-bail:
-	/* lock area */
-	for ( i=ab; i<eb; i+=b->fblksz ) {
-		b->ops->lock_block(b, b->start + i );
-	}
-
-	/* final verification */
-	if ( !err ) {
-		for ( i=0; i<n_bytes; i++ ) {
-			if ( ((char*)(b->start + offset))[i] != src[i] ) {
-				fprintf(stderr,"Final verification failed at offset 0x%08"PRIx32"\n", (offset + i));
-				return b->start + offset + i;
-			}
-		}
-	}
-
-	return err;
-}
-
-int
-BSP_flashErase(int bank, uint32_t offset, uint32_t size, int quiet)
-{
-struct bankdesc *b;
-uint32_t		 a,i;
-int              f;
-
-	if ( ! (b = argcheck(bank, offset, 0, size)) )
-		return -1;
-
-	if ( offset & (b->fblksz - 1) ) {
-		fprintf(stderr,"Offset misaligned (needs to be multiple of 0x%08"PRIx32")\n", b->fblksz);
-		return -1;
-	}
-	if ( size & (b->fblksz - 1) ) {
-		fprintf(stderr,"Size misaligned (needs to be multiple of 0x%08"PRIx32")\n", b->fblksz);
-		return -1;
-	}
-
-	a = b->start + offset;
-
-	if ( !quiet ) {
-		printf("ERASING Flash (Bank #%i)\n    from 0x%08"PRIx32" .. 0x%08"PRIx32"\nproceed y/[n]?",
-			bank, a, (a+size-1));
-		fflush(stdout);
-		if ( 'Y' != getUc() ) {
-			printf("ABORTED\n");
-			return -1;
-		}
-	}
-	f = 0;
-	while ( size ) {
-		/* work to do ? */
-		for ( i = 0; i<b->fblksz; i++ ) {
-			if ( (char)0xff != ((char*)a)[i] ) {
-				b->ops->unlock_block(b, a);
-				i = b->ops->erase_block(b, a);
-				b->ops->lock_block(b, a);
-				if (i) {
-					wipe(f);
-					return a;
-				}
-				break;
-			}
-		}
-
-		if ( quiet < 2 ) {
-			f = flip(f);
-		}
-
-		a    += b->fblksz;
-		size -= b->fblksz;
-	}
-	b->ops->array_mode(b, a);
-	if ( quiet < 2 ) {
-		wipe(f);
-	}
-	return 0;
-}
-
-int
-BSP_flashWrite(int bank, uint32_t offset, const char *src, uint32_t n_bytes, int quiet)
-{
-int      rval;
-
-	if ( !src ) {
-		fprintf(stderr,"Error: Data source pointer is NULL\n");
-		return -1;
-	}
-
-	if ( (rval = regionCheckAndErase(bank, offset, src, n_bytes, quiet)) )
-		return rval;
-
-	if ( ! quiet ) {
-		printf("WRITING  "); fflush(stdout);
-	}
-
-	rval = BSP_flashWriteRegion(bank, offset, src, n_bytes, quiet);
-
-	if ( !quiet && !rval ) {
-		printf("DONE");
-	}
-	if ( !quiet )
-		printf("\n");
-	return rval;
-}
-
-static int
-bfill(int fd, char *buf, int size)
-{
-int got, avail;
-	for (avail = size; (got = read(fd, buf, avail)) > 0; avail-=got ) {
-		buf  += got;
-	}
-	return size - avail;
-}
-
-int
-BSP_flashWriteFile(int bank, uint32_t offset, const char *fname, int quiet)
-{
-int             fd   = -1;
-struct stat     sb;
-uint32_t	    sz;
-int			    rval = -1;
-char		   *buf  = 0;
-uint32_t	    got;
-struct bankdesc *b;
-unsigned        f    = 0;
-
-	if ( ! (b = bankValidate(bank, 0)) )
-		return -1;
-
-	for ( sz = 0; -1 == fd ;  ) {
-		if ( (fd = open(fname,O_RDONLY)) < 0 ) {
-			perror("Opening file");
-			return -1;
-		}
-
-		if ( sz )
-			break;
-
-		if ( fstat(fd, &sb) ) {
-			fprintf(stderr,"Warning: fstat doesn't work; need to slurp file to determine size; please be patient.\n");
-			FILE *f;
-			close(fd); fd = -1;
-			f = fopen(fname,"r");
-			if ( !f ) {
-				perror("fdopen");
-				return -1;
-			}
-			while ( EOF != fgetc(f) )
-				sz++;
-			fclose(f);
-			/* reopen */
-		} else {
-			sz = sb.st_size;
-		}
-		if ( 0 == sz ) {
-			fprintf(stderr,"Error: zero file size (?)\n");
-			goto bail;
-		}
-	}
-
-	if ( !(buf = malloc(b->fblksz)) ) {
-		perror("buffer allocation");
-		goto bail;
-	}
-
-	/* See if we can erase the entire region */
-	if ( (rval = regionCheckAndErase(bank, offset, buf, sz, quiet)) )
-		goto bail;
-
-	/* Proceed copying chunks */
-	if ( quiet < 2 ) {
-		printf("WRITING  "); fflush(stdout);
-	}
-
-	while ( (got = bfill(fd, buf, b->fblksz)) > 0 && sz ) {
-		if ( (rval = BSP_flashWriteRegion(bank, offset, buf, got, 1)) ) {
-			wipe(f);
-			goto bail;
-		}
-		offset += got;
-		sz     -= got;
-		if ( quiet < 2 ) {
-			f = flip(f);
-		}
-	}
-	if ( got < 0 ) {
-		perror("reading file");
-		rval = offset;
-		goto bail;
-	}
-
-	if ( quiet < 2 ) {
-		wipe(f);
-		printf("DONE");
-	}
-bail:
-	if ( quiet < 2 ) {
-		printf("\n");
-	}
-	if ( fd > -1 )
-		close(fd);
-	free(buf);
-	return rval;
-}
-
-int
-BSP_flashWriteEnable(int bank)
-{
-	return BSP_flashBspOps.flash_wp(bank,0);
-}
-
-int
-BSP_flashWriteDisable(int bank)
-{
-	return BSP_flashBspOps.flash_wp(bank,1);
-}
-
-int
-BSP_flashDumpInfo(FILE *f)
-{
-struct bankdesc *b;
-int		        bank;
-
-	if ( !f )
-		f = stdout;
-
-	/* use 'bankValidate()' with 'quiet' flag to suppress error message when
-	 * we reach the end of the table.
-	 */
-	for ( bank = 0; BSP_flashBspOps.bankcheck(bank,1); bank++ ) {
-		if ( (b=argcheck(bank,0,0,0)) ) {
-			fprintf(f,"Flash Bank #%i; 0x%08"PRIx32" .. 0x%08"PRIx32" (%"PRId32" bytes)\n",
-				bank, b->start, (b->start + b->size - 1), b->size);
-			fprintf(f,"%i * %i-bit devices in parallel; block size 0x%"PRIx32"\n", FLASH_NDEVS(b), FLASH_WIDTH(b)*8, b->fblksz);
-			BSP_flashCheckId(b, b->start, 0);
-		}
-	}
-
-	return 0;
-}
-
-#else
-
-int
-main(int argc, char **argv)
-{
-uint32_t fla[1000];
-uint32_t qqq[1000];
-int i;
-	for ( i=0; i<sizeof(qqq)/sizeof(qqq[0]); i++ )
-		qqq[i] = 0xdada<<16 | i;
-	BSP_flashWriteDataRaw(0, (uint32_t)fla, (char*)qqq, 32, 0);
-}
-#endif