Remove stray white spaces.

1 files changed, 12 insertions, 12 deletions

diff --git a/c/src/lib/libbsp/sh/gensh1/startup/bspstart.c b/c/src/lib/libbsp/sh/gensh1/startup/bspstart.c
index 52486e2383..feb935c998 100644
--- a/c/src/lib/libbsp/sh/gensh1/startup/bspstart.c
+++ b/c/src/lib/libbsp/sh/gensh1/startup/bspstart.c
@@ -29,7 +29,7 @@
 #include <bsp.h>
 #include <rtems/libio.h>
 #include <rtems/libcsupport.h>
- 
+
 /*
  *  The original table from the application and our copy of it with
  *  some changes.
@@ -46,7 +46,7 @@ char *rtems_progname;
 /*
  *  Use the shared implementations of the following routines
  */
- 
+
 void bsp_postdriver_hook(void);
 void bsp_libc_init( void *, uint32_t, int );
 
@@ -62,11 +62,11 @@ void bsp_libc_init( void *, uint32_t, int );
  *      not yet initialized.
  *
  */
- 
+
 void bsp_pretasking_hook(void)
 {
     bsp_libc_init(&HeapStart, (char *)&HeapEnd - (char *)&HeapStart, 0);
- 
+
 #ifdef RTEMS_DEBUG
     rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
 #endif
@@ -81,13 +81,13 @@ void bsp_pretasking_hook(void)
 void bsp_start(void)
 {
   /*
-     For real boards you need to setup the hardware 
+     For real boards you need to setup the hardware
      and need to copy the vector table from rom to ram.
 
-     Depending on the board this can either be done from inside the rom 
+     Depending on the board this can either be done from inside the rom
      startup code, rtems startup code or here.
    */
-   
+
   /*
    *  Allocate the memory for the RTEMS Work Space.  This can come from
    *  a variety of places: hard coded address, malloc'ed from outside
@@ -103,10 +103,10 @@ void bsp_start(void)
    */
 
   BSP_Configuration.work_space_start = (void *) &WorkSpaceStart ;
-  BSP_Configuration.work_space_size  = 
-    (uint32_t) &WorkSpaceEnd - 
+  BSP_Configuration.work_space_size  =
+    (uint32_t) &WorkSpaceEnd -
     (uint32_t) &WorkSpaceStart ;
-  
+
   /*
    *  initialize the CPU table for this BSP
    */
@@ -115,7 +115,7 @@ void bsp_start(void)
   _CPU_Interrupt_stack_low = &CPU_Interrupt_stack_low ;
   _CPU_Interrupt_stack_high = &CPU_Interrupt_stack_high ;
 
-  Cpu_table.interrupt_stack_size = 
+  Cpu_table.interrupt_stack_size =
     (uint32_t) (&CPU_Interrupt_stack_high) -
     (uint32_t) (&CPU_Interrupt_stack_low) ;
 #endif
@@ -123,7 +123,7 @@ void bsp_start(void)
 
   Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
   Cpu_table.postdriver_hook = bsp_postdriver_hook;
-  
+
 #if ( CPU_ALLOCATE_INTERRUPT_STACK == TRUE )
   Cpu_table.interrupt_stack_size = CONFIGURE_INTERRUPT_STACK_MEMORY;
 #endif