bsp/motorola_powerpc: Move bspstart.c to bsps

This shared powerpc file was only used by this BSP.

This patch is a part of the BSP source reorganization.

Update #3285.

2 files changed, 1 insertions, 377 deletions

diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am b/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am
index 212c6920de..71567fc38a 100644
--- a/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am
+++ b/c/src/lib/libbsp/powerpc/motorola_powerpc/Makefile.am
@@ -34,7 +34,7 @@ project_lib_LIBRARIES = librtemsbsp.a
 librtemsbsp_a_SOURCES =
 
 # startup
-librtemsbsp_a_SOURCES += ../shared/startup/bspstart.c
+librtemsbsp_a_SOURCES += ../../../../../../bsps/powerpc/motorola_powerpc/start/bspstart.c
 librtemsbsp_a_SOURCES += ../shared/startup/bspgetworkarea.c
 librtemsbsp_a_SOURCES += ../shared/showbats.c
 librtemsbsp_a_SOURCES += ../shared/startup/bsppredriverhook.c
diff --git a/c/src/lib/libbsp/powerpc/shared/startup/bspstart.c b/c/src/lib/libbsp/powerpc/shared/startup/bspstart.c
deleted file mode 100644
index dac4b2452d..0000000000
--- a/c/src/lib/libbsp/powerpc/shared/startup/bspstart.c
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- *  This routine does the bulk of the system initialization.
- */
-
-/*
- *  COPYRIGHT (c) 1989-2007.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- *
- *  Modified to support the MCP750.
- *  Modifications Copyright (C) 1999 Eric Valette. valette@crf.canon.fr
- */
-
-#include <string.h>
-
-#include <bsp.h>
-#include <bsp/bootcard.h>
-#include <rtems/bspIo.h>
-#include <rtems/counter.h>
-#include <bsp/consoleIo.h>
-#include <libcpu/spr.h>
-#include <bsp/residual.h>
-#include <bsp/pci.h>
-#include <bsp/openpic.h>
-#include <bsp/irq.h>
-#include <libcpu/bat.h>
-#include <libcpu/pte121.h>
-#include <libcpu/cpuIdent.h>
-#include <bsp/vectors.h>
-#include <bsp/motorola.h>
-#include <rtems/powerpc/powerpc.h>
-
-extern void _return_to_ppcbug(void);
-extern unsigned long __rtems_end[];
-extern void L1_caches_enables(void);
-extern unsigned get_L2CR(void);
-extern void set_L2CR(unsigned);
-extern Triv121PgTbl BSP_pgtbl_setup(unsigned int *);
-extern void			BSP_pgtbl_activate(Triv121PgTbl);
-
-SPR_RW(SPRG1)
-
-#if defined(DEBUG_BATS)
-extern void ShowBATS(void);
-#endif
-
-/*
- *  Driver configuration parameters
- */
-uint32_t   bsp_clicks_per_usec;
-
-/*
- * Copy of residuals passed by firmware
- */
-RESIDUAL residualCopy;
-/*
- * Copy Additional boot param passed by boot loader
- */
-#define MAX_LOADER_ADD_PARM 80
-char loaderParam[MAX_LOADER_ADD_PARM];
-
-char *BSP_commandline_string = loaderParam;
-/*
- * Vital Board data Start using DATA RESIDUAL
- */
-/*
- * Total memory using RESIDUAL DATA
- */
-unsigned int BSP_mem_size;
-
-/*
- * PCI Bus Frequency
- */
-unsigned int BSP_bus_frequency;
-/*
- * processor clock frequency
- */
-unsigned int BSP_processor_frequency;
-/*
- * Time base divisior (how many tick for 1 second).
- */
-unsigned int BSP_time_base_divisor;
-
-/*
- *  Use the shared implementations of the following routines
- */
-
-char *save_boot_params(
-  void *r3,
-  void *r4,
-  void *r5,
-  char *cmdline_start,
-  char *cmdline_end
-)
-{
-
-  residualCopy = *(RESIDUAL *)r3;
-  strncpy(loaderParam, cmdline_start, MAX_LOADER_ADD_PARM);
-  loaderParam[MAX_LOADER_ADD_PARM - 1] ='\0';
-  return loaderParam;
-}
-
-#if defined(mvme2100)
-unsigned int EUMBBAR;
-
-/*
- * Return the current value of the Embedded Utilities Memory Block Base Address
- * Register (EUMBBAR) as read from the processor configuration register using
- * Processor Address Map B (CHRP).
- */
-static unsigned int get_eumbbar(void) {
-  out_le32( (volatile uint32_t *)0xfec00000, 0x80000078 );
-  return in_le32( (volatile uint32_t *)0xfee00000 );
-}
-#endif
-
-/*
- *  bsp_start
- *
- *  This routine does the bulk of the system initialization.
- */
-
-void bsp_start( void )
-{
-#if !defined(mvme2100)
-  unsigned l2cr;
-#endif
-  uintptr_t intrStackStart;
-  uintptr_t intrStackSize;
-  prep_t boardManufacturer;
-  motorolaBoard myBoard;
-  Triv121PgTbl	pt=0;
-
-  /*
-   * Get CPU identification dynamically. Note that the get_ppc_cpu_type()
-   * function store the result in global variables so that it can be used
-   * later...
-   */
-  get_ppc_cpu_type();
-  get_ppc_cpu_revision();
-
-  /*
-   * Init MMU block address translation to enable hardware access
-   */
-
-#if !defined(mvme2100)
-  /*
-   * PC legacy IO space used for inb/outb and all PC compatible hardware
-   */
-  setdbat(1, _IO_BASE, _IO_BASE, 0x10000000, IO_PAGE);
-#endif
-
-  /*
-   * PCI devices memory area. Needed to access OpenPIC features
-   * provided by the Raven
-   *
-   * T. Straumann: give more PCI address space
-   */
-  setdbat(2, PCI_MEM_BASE+PCI_MEM_WIN0, PCI_MEM_BASE+PCI_MEM_WIN0, 0x10000000, IO_PAGE);
-
-  /*
-   * Must have acces to open pic PCI ACK registers provided by the RAVEN
-   */
-#ifndef qemu
-  setdbat(3, 0xf0000000, 0xf0000000, 0x10000000, IO_PAGE);
-#else
-  setdbat(3, 0xb0000000, 0xb0000000, 0x10000000, IO_PAGE);
-#endif
-
-#if defined(mvme2100)
-  /* Need 0xfec00000 mapped for this */
-  EUMBBAR = get_eumbbar();
-#endif
-
-  /*
-   * enables L1 Cache. Note that the L1_caches_enables() codes checks for
-   * relevant CPU type so that the reason why there is no use of myCpu...
-   */
-  L1_caches_enables();
-
-  select_console(CONSOLE_LOG);
-
-  /*
-   * We check that the keyboard is present and immediately
-   * select the serial console if not.
-   */
-#if defined(BSP_KBD_IOBASE)
-  { int err;
-    err = kbdreset();
-    if (err) select_console(CONSOLE_SERIAL);
-  }
-#else
-  select_console(CONSOLE_SERIAL);
-#endif
-
-
-#if !defined(mvme2100)
-  /*
-   * Enable L2 Cache. Note that the set_L2CR(L2CR) codes checks for
-   * relevant CPU type (mpc750)...
-   */
-  l2cr = get_L2CR();
-#ifdef SHOW_LCR2_REGISTER
-  printk("Initial L2CR value = %x\n", l2cr);
-#endif
-  if ( (! (l2cr & 0x80000000)) && ((int) l2cr == -1))
-    set_L2CR(0xb9A14000);
-#endif
-
-  /*
-   * Initialize the interrupt related settings.
-   */
-  intrStackStart = (uintptr_t) __rtems_end;
-  intrStackSize = rtems_configuration_get_interrupt_stack_size();
-
-  /*
-   * Initialize default raw exception handlers.
-   */
-  ppc_exc_initialize(intrStackStart, intrStackSize);
-
-  boardManufacturer   =  checkPrepBoardType(&residualCopy);
-  if (boardManufacturer != PREP_Motorola) {
-    printk("Unsupported hardware vendor\n");
-    while (1);
-  }
-  myBoard = getMotorolaBoard();
-
-  printk("-----------------------------------------\n");
-  printk("Welcome to %s on %s\n", _RTEMS_version,
-                                    motorolaBoardToString(myBoard));
-  printk("-----------------------------------------\n");
-#ifdef SHOW_MORE_INIT_SETTINGS
-  printk("Residuals are located at %x\n", (unsigned) &residualCopy);
-  printk("Additionnal boot options are %s\n", loaderParam);
-  printk("Software IRQ stack starts at %x with size %u\n", intrStackStart, intrStackSize);
-  printk("-----------------------------------------\n");
-#endif
-
-#ifdef TEST_RETURN_TO_PPCBUG
-  printk("Hit <Enter> to return to PPCBUG monitor\n");
-  printk("When Finished hit GO. It should print <Back from monitor>\n");
-  debug_getc();
-  _return_to_ppcbug();
-  printk("Back from monitor\n");
-  _return_to_ppcbug();
-#endif /* TEST_RETURN_TO_PPCBUG  */
-
-#ifdef SHOW_MORE_INIT_SETTINGS
-  printk("Going to start PCI buses scanning and initialization\n");
-#endif
-
-  pci_initialize();
-  {
-    const struct _int_map *bspmap  = motorolaIntMap(currentBoard);
-    if( bspmap ) {
-       printk("pci : Configuring interrupt routing for '%s'\n",
-          motorolaBoardToString(currentBoard));
-       FixupPCI(bspmap, motorolaIntSwizzle(currentBoard));
-    }
-    else
-       printk("pci : Interrupt routing not available for this bsp\n");
- }
-
-#ifdef SHOW_MORE_INIT_SETTINGS
-  printk("Number of PCI buses found is : %d\n", pci_bus_count());
-#endif
-#ifdef TEST_RAW_EXCEPTION_CODE
-  printk("Testing exception handling Part 1\n");
-  /*
-   * Cause a software exception
-   */
-  __asm__ __volatile ("sc");
-  /*
-   * Check we can still catch exceptions and return coorectly.
-   */
-  printk("Testing exception handling Part 2\n");
-  __asm__ __volatile ("sc");
-
-  /*
-   * Somehow doing the above seems to clobber SPRG0 on the mvme2100.  The
-   * interrupt disable mask is stored in SPRG0. Is this a problem?
-   */
-  ppc_interrupt_set_disable_mask( PPC_INTERRUPT_DISABLE_MASK_DEFAULT);
-
-#endif
-
-/* See above */
-
-  BSP_mem_size            = residualCopy.TotalMemory;
-  BSP_bus_frequency       = residualCopy.VitalProductData.ProcessorBusHz;
-  BSP_processor_frequency = residualCopy.VitalProductData.ProcessorHz;
-  BSP_time_base_divisor   = (residualCopy.VitalProductData.TimeBaseDivisor?
-                    residualCopy.VitalProductData.TimeBaseDivisor : 4000);
-
-  /* clear hostbridge errors but leave MCP disabled -
-   * PCI config space scanning code will trip otherwise :-(
-   */
-  _BSP_clear_hostbridge_errors(0 /* enableMCP */, 0/*quiet*/);
-
-  if (BSP_mem_size > 0x10000000)
-  {
-    /* Support cases of system memory size larger than 256Mb.
-     *
-     * We use BAT3 in order to obtain access to the top section of the RAM.
-     * We also need to do this just before setting up the page table because
-     * this is where the page table will be located.
-     */
-    const unsigned int mem256Count = (BSP_mem_size / 0x10000000);
-    const unsigned int BAT3Addr    = ((BSP_mem_size % 0x10000000)  ?
-                                       (mem256Count     * 0x10000000) :
-                                      ((mem256Count-1) * 0x10000000));
-    setdbat(3, BAT3Addr, BAT3Addr, 0x10000000, IO_PAGE);
-#ifdef SHOW_MORE_INIT_SETTINGS
-    printk("Setting up BAT3 for large memory support. (BAT3 --> 0x%x)\n", BAT3Addr);
-#endif
-  }
-
-  /* Allocate and set up the page table mappings
-   * This is only available on >604 CPUs.
-   *
-   * NOTE: This setup routine may modify the available memory
-   *       size. It is essential to call it before
-   *       calculating the workspace etc.
-   */
-  pt = BSP_pgtbl_setup(&BSP_mem_size);
-
-  if (!pt || TRIV121_MAP_SUCCESS != triv121PgTblMap(
-            pt, TRIV121_121_VSID,
-#ifndef qemu
-            0xfeff0000,
-#else
-            0xbffff000,
-#endif
-            1,
-            TRIV121_ATTR_IO_PAGE, TRIV121_PP_RW_PAGE)) {
-	printk("WARNING: unable to setup page tables VME "
-               "bridge must share PCI space\n");
-  }
-
-  /*
-   *  initialize the device driver parameters
-   */
-  bsp_clicks_per_usec 	 = BSP_bus_frequency/(BSP_time_base_divisor * 1000);
-  rtems_counter_initialize_converter(
-    BSP_bus_frequency / (BSP_time_base_divisor / 1000)
-  );
-
-  /*
-   * Initalize RTEMS IRQ system
-   */
-  BSP_rtems_irq_mng_init(0);
-
-  /* Activate the page table mappings only after
-   * initializing interrupts because the irq_mng_init()
-   * routine needs to modify the text
-   */
-  if (pt) {
-#ifdef  SHOW_MORE_INIT_SETTINGS
-    printk("Page table setup finished; will activate it NOW...\n");
-#endif
-    BSP_pgtbl_activate(pt);
-    /* finally, switch off DBAT3 */
-    setdbat(3, 0, 0, 0, 0);
-  }
-
-#if defined(DEBUG_BATS)
-  ShowBATS();
-#endif
-
-#ifdef SHOW_MORE_INIT_SETTINGS
-  printk("Exit from bspstart\n");
-#endif
-}