diff options
author | Joel Sherrill <joel.sherrill@OARcorp.com> | 2000-01-07 20:39:45 +0000 |
---|---|---|
committer | Joel Sherrill <joel.sherrill@OARcorp.com> | 2000-01-07 20:39:45 +0000 |
commit | 1d54d3b5af6e8c332334712d138b67aa5a057883 (patch) | |
tree | 1b8c4985eebc50842a99cc9b1ea590accabc8f89 /c/src/lib/libbsp/powerpc | |
parent | Patch from John M. Mills <jmills@tga.com> to correct the baseline (diff) | |
download | rtems-1d54d3b5af6e8c332334712d138b67aa5a057883.tar.bz2 |
Renaming mcp750 to motorola_shared since that is the basis for both
the mvme2307 and mcp750 BSPs. In addition, it can support many
Motorola PowerPC based VME and PCI boards.
Diffstat (limited to '')
23 files changed, 0 insertions, 1776 deletions
diff --git a/c/src/lib/libbsp/powerpc/mcp750/BOOTING b/c/src/lib/libbsp/powerpc/mcp750/BOOTING deleted file mode 100644 index 5565fbb2b3..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/BOOTING +++ /dev/null @@ -1,78 +0,0 @@ -# -# $Id$ -# - -This file documents the on board monitor (PPCBUG) configuration used -to be able to boot the archives located in powerpc-rtems/c/mcp750/bin. -This information was provided by Eric Valette <valette@crf.canon.fr> - ------------------------ ENV command-------------- -PPC1-Bug>env -Bug or System environment [B/S] = B? -Field Service Menu Enable [Y/N] = N? -Probe System for Supported I/O Controllers [Y/N] = Y? -Auto-Initialize of NVRAM Header Enable [Y/N] = Y? -Network PReP-Boot Mode Enable [Y/N] = Y? <==================== -SCSI Bus Reset on Debugger Startup [Y/N] = N? -Primary SCSI Bus Negotiations Type [A/S/N] = A? -Primary SCSI Data Bus Width [W/N] = N? -Secondary SCSI Identifier = "07"? -NVRAM Boot List (GEV.fw-boot-path) Boot Enable [Y/N] = Y? -NVRAM Boot List (GEV.fw-boot-path) Boot at power-up only [Y/N] = Y? -NVRAM Boot List (GEV.fw-boot-path) Boot Abort Delay = 5? -Auto Boot Enable [Y/N] = Y? -Auto Boot at power-up only [Y/N] = Y? -Auto Boot Scan Enable [Y/N] = Y? -Auto Boot Scan Device Type List = FDISK/CDROM/TAPE/HDISK/? -Auto Boot Controller LUN = 14? -Auto Boot Device LUN = 40? -Auto Boot Partition Number = 03? -Auto Boot Abort Delay = 7? -Auto Boot Default String [NULL for an empty string] = ? -ROM Boot Enable [Y/N] = N? -ROM Boot at power-up only [Y/N] = Y? -ROM Boot Abort Delay = 5? -ROM Boot Direct Starting Address = FFF00000? -ROM Boot Direct Ending Address = FFFFFFFC? -Network Auto Boot Enable [Y/N] = N? -Network Auto Boot at power-up only [Y/N] = N? -Network Auto Boot Controller LUN = 00? -Network Auto Boot Device LUN = 00? -Network Auto Boot Abort Delay = 5? -Network Auto Boot Configuration Parameters Offset (NVRAM) = 00001000? -Memory Size Enable [Y/N] = Y? -Memory Size Starting Address = 00000000? -Memory Size Ending Address = 02000000? -DRAM Speed in NANO Seconds = 60? -ROM First Access Length (0 - 31) = 10? -ROM Next Access Length (0 - 15) = 0? -DRAM Parity Enable [On-Detection/Always/Never - O/A/N] = O? -L2Cache Parity Enable [On-Detection/Always/Never - O/A/N] = O? -PCI Interrupts Route Control Registers (PIRQ0/1/2/3) = 0A050000? -Serial Startup Code Master Enable [Y/N] = N? -Serial Startup Code LF Enable [Y/N] = N? ----------------------NIOT --------------------------- -PPC1-Bug>niot -Controller LUN =00? -Device LUN =00? -Node Control Memory Address =03F9E000? -Client IP Address =194.2.81.157? -Server IP Address =194.2.81.241? -Subnet IP Address Mask =255.255.255.0? -Broadcast IP Address =255.255.255.255? -Gateway IP Address =194.2.81.254? -Boot File Name ("NULL" for None) =debug-ppc? -Argument File Name ("NULL" for None) =? -Boot File Load Address =001F0000? -Boot File Execution Address =001F0000? -Boot File Execution Delay =00000000? -Boot File Length =00000000? -Boot File Byte Offset =00000000? -BOOTP/RARP Request Retry =05? -TFTP/ARP Request Retry =05? -Trace Character Buffer Address =00000000? -BOOTP/RARP Request Control: Always/When-Needed (A/W)=W? -BOOTP/RARP Reply Update Control: Yes/No (Y/N) =Y? --------------------------------------------------------- - - diff --git a/c/src/lib/libbsp/powerpc/mcp750/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/Makefile.in deleted file mode 100644 index 8546f0c6cb..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/Makefile.in +++ /dev/null @@ -1,32 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../.. -subdir = powerpc/mcp750 - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/directory.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -SRCS = README - -all: $(SRCS) - -# wrapup is the one that actually builds and installs the library -# from the individual .rel files built in other directories -SUBDIRS = clock console include pci residual openpic irq vectors start \ - startup bootloader motorola wrapup - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/README b/c/src/lib/libbsp/powerpc/mcp750/README deleted file mode 100644 index f6ffb8428d..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/README +++ /dev/null @@ -1,48 +0,0 @@ -# -# $Id$ -# - -BSP NAME: MCP750 -BOARD: MCP750 from motorola -BUS: PCI -CPU FAMILY: ppc -CPU: PowerPC 750 -COPROCESSORS: N/A -MODE: 32 bit mode - -DEBUG MONITOR: PPCBUG mode - -PERIPHERALS -=========== -TIMERS: PPC internal Timebase register - RESOLUTION: ??? -SERIAL PORTS: simulated via bug -REAL-TIME CLOCK: PPC internal Decrementer register -DMA: none -VIDEO: none -SCSI: none -NETWORKING: DEC21140 - -DRIVER INFORMATION -================== -CLOCK DRIVER: PPC internal -IOSUPP DRIVER: N/A -SHMSUPP: N/A -TIMER DRIVER: PPC internal -TTY DRIVER: PPC internal - -STDIO -===== -PORT: Console port 0 -ELECTRICAL: na -BAUD: na -BITS PER CHARACTER: na -PARITY: na -STOP BITS: na - -Notes -===== - -Based on papyrus bsp which only really supports -the PowerOpen ABI with an ELF assembler. - diff --git a/c/src/lib/libbsp/powerpc/mcp750/README.MVME2300 b/c/src/lib/libbsp/powerpc/mcp750/README.MVME2300 deleted file mode 100644 index 572a4b175b..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/README.MVME2300 +++ /dev/null @@ -1,39 +0,0 @@ -This BSP was adapted from Eric Valette MCP750 Generic motorola -port to MVME2300 by Jay Kulpinski <jskulpin@eng01.gdds.com>. -In other to work correctly, the Tundra Universe chip must -be turned off using PPCBug as explained below. - - - - -The Tundra Universe chip is a bridge between the PCI and VME buses. -It has four programmable mapping windows in each direction, much like -the Raven. PPCBUG lets you specify the mappings if you don't want -to do it in your application. The mappings on our board, which may -or not be the default Motorola mappings, had one window appearing -at 0x01000000 in PCI space. This is the same place the bootloader -code remapped the Raven registers. The windows' mappings are -very likely to be application specific, so I wouldn't worry too -much about setting them in the BSP, but it would be nice to have -a standard interface to do so. Whoever needs that first can -incorporate the ppcn_60x BSP code for the Universe chip. :-) - -These options in PPCBUG's ENV command did the job: - -VME3PCI Master Master Enable [Y/N] = Y? -PCI Slave Image 0 Control = 00000000? <----- -PCI Slave Image 0 Base Address Register = 00000000? -PCI Slave Image 0 Bound Address Register = 00000000? -PCI Slave Image 0 Translation Offset = 00000000? -PCI Slave Image 1 Control = 00000000? <----- -PCI Slave Image 1 Base Address Register = 01000000? -PCI Slave Image 1 Bound Address Register = 20000000? -PCI Slave Image 1 Translation Offset = 00000000? -PCI Slave Image 2 Control = 00000000? <----- -PCI Slave Image 2 Base Address Register = 20000000? -PCI Slave Image 2 Bound Address Register = 22000000? -PCI Slave Image 2 Translation Offset = D0000000? -PCI Slave Image 3 Control = 00000000? <----- -PCI Slave Image 3 Base Address Register = 2FFF0000? -PCI Slave Image 3 Bound Address Register = 30000000? -PCI Slave Image 3 Translation Offset = D0000000? diff --git a/c/src/lib/libbsp/powerpc/mcp750/README.OTHERBOARDS b/c/src/lib/libbsp/powerpc/mcp750/README.OTHERBOARDS deleted file mode 100644 index 29d50292d6..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/README.OTHERBOARDS +++ /dev/null @@ -1,97 +0,0 @@ -# -# $Id$ -# - -This BSP is designed to support multiple Motorola PowerPC boards. The -following extract from some email from Eric Valette should provide -the basic information required to use this BSP on other models. - - -Joel> + I am sure there are other Motorola boards which this BSP should -Joel> support. If you know of other models that should work, list -Joel> them off to me. I will make them aliases and note them as -Joel> untested in the status. - -Extract of motorola.c : - -static const mot_info_t mot_boards[] = { - {0x300, 0x00, "MVME 2400"}, - {0x010, 0x00, "Genesis"}, - {0x020, 0x00, "Powerstack (Series E)"}, - {0x040, 0x00, "Blackhawk (Powerstack)"}, - {0x050, 0x00, "Omaha (PowerStack II Pro3000)"}, - {0x060, 0x00, "Utah (Powerstack II Pro4000)"}, - {0x0A0, 0x00, "Powerstack (Series EX)"}, - {0x1E0, 0xE0, "Mesquite cPCI (MCP750)"}, - {0x1E0, 0xE1, "Sitka cPCI (MCPN750)"}, - {0x1E0, 0xE2, "Mesquite cPCI (MCP750) w/ HAC"}, - {0x1E0, 0xF6, "MTX Plus"}, - {0x1E0, 0xF7, "MTX wo/ Parallel Port"}, - {0x1E0, 0xF8, "MTX w/ Parallel Port"}, - {0x1E0, 0xF9, "MVME 2300"}, - {0x1E0, 0xFA, "MVME 2300SC/2600"}, - {0x1E0, 0xFB, "MVME 2600 with MVME712M"}, - {0x1E0, 0xFC, "MVME 2600/2700 with MVME761"}, - {0x1E0, 0xFD, "MVME 3600 with MVME712M"}, - {0x1E0, 0xFE, "MVME 3600 with MVME761"}, - {0x1E0, 0xFF, "MVME 1600-001 or 1600-011"}, - {0x000, 0x00, ""} -}; - -In theory, each board starting with 0x1E0 should be really straighforward -to port (604 proc or above and raven host bridge...). - -Joel> Then we just have to add README.BOARD_MODEL and TIMES.BOARD_MODEL - -I should also make a README to explain that some file containing -switch statement should be completed (e.g libbsp/powerpc/shared/irq_init.c -[NOTE: This is that README. :) ] - - ------------------------------ - if ( (currentBoard == MESQUITE) ) { - VIA_isa_bridge_interrupts_setup(); - known_cpi_isa_bridge = 1; - } - if (!known_cpi_isa_bridge) { - printk("Please add code for PCI/ISA bridge init to libbsp/shared/irq/irq_init.c\n"); - printk("If your card works correctly please add a test and set known_cpi_isa_bridge to true\n"); - } - ------------------------------ - -and libbsp/powerpc/mpc6xx/execeptions/raw_exception.c - - ------------------------------- - -int mpc604_vector_is_valid(rtems_vector vector) -{ - /* - * Please fill this for MVME2307 - */ - printk("Please complete libcpu/powerpc/XXX/raw_exception.c\n"); - return 0; -} - -int mpc60x_set_exception (const rtems_raw_except_connect_data* except) -{ - unsigned int level; - - if (current_ppc_cpu == PPC_750) { - if (!mpc750_vector_is_valid(except->exceptIndex)){ - return 0; - } - goto exception_ok; - } - if (current_ppc_cpu == PPC_604) { - if (!mpc604_vector_is_valid(except->exceptIndex)){ - return 0; - } - goto exception_ok; - } - printk("Please complete libcpu/powerpc/XXX/raw_exception.c\n"); - return 0; - ----------------------------------- - -NB : re readding the code I should have done a switch... TSSSS.A future patche - I think. - - diff --git a/c/src/lib/libbsp/powerpc/mcp750/README.dec21140 b/c/src/lib/libbsp/powerpc/mcp750/README.dec21140 deleted file mode 100644 index 5b6c479d9f..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/README.dec21140 +++ /dev/null @@ -1,5 +0,0 @@ -# -# $Id$ -# - -The dec21140 network driver is found in libchip/networking. diff --git a/c/src/lib/libbsp/powerpc/mcp750/bootloader/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/bootloader/Makefile.in deleted file mode 100644 index 86ca29151d..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/bootloader/Makefile.in +++ /dev/null @@ -1,97 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = powerpc/mcp750/bootloader - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/console:@srcdir@/../../shared/bootloader - -# C source names, if any, go here -- minus the .c -C_PIECES = misc pci zlib mm em86 polled_io lib -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = bootldr.h zlib.h pci.h - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = head exception em86real -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(S_O_FILES) $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -CC_PIECES = -CC_FILES = $(CC_PIECES:%=%.cc) -CC_O_FILES = $(CC_PIECES:%=${ARCH}/%.o) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -D__BOOT__ -DDEBUG -CFLAGS += -msoft-float -mstrict-align -fno-builtin -Wall -mmultiple -mstring \ - -O2 -fomit-frame-pointer -mrelocatable -ffixed-r13 -mno-sdata -D__BOOT__ \ - -DDEBUG - -ASFLAGS += -mrelocatable - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -IMAGES = rtems.gz - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want - -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += bootloader reloc.O -CLOBBER_ADDITIONS += $(IMAGES) - -# -# CAUTION : -# -# As we use very specific compilation options in this directory -# we shall not use any other code. This includes the newlib libc.a -# as well as other code located in .o files in mcp750 directory. -# -# NEVER remove lib.c. You have been warned... -# -bootloader : ${OBJS} $(IMAGES) $(BINARY_LOADED) ppcboot.lds - $(LD) -o bootloader $(OBJS) --just-symbols=$(BINARY_LOADED) \ - -b binary $(IMAGES) -T @srcdir@/../../shared/bootloader/ppcboot.lds \ - -Map bootloader.map - -check_unresolved : ${OBJS} - $(LD) -r -o reloc.O ${OBJS} - $(NM) reloc.O |grep ' U ' - echo "Every symbol listed should be defined in @srcdir@/ppcboot.lds" - -rtems.gz: $(BINARY_LOADED) - $(OBJCOPY) $(BINARY_LOADED) rtems -O binary -R .comment -S - gzip -vf9 rtems - rm -f rtems - -all: ${ARCH} $(SRCS) ${OBJ} - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/bsp_specs b/c/src/lib/libbsp/powerpc/mcp750/bsp_specs deleted file mode 100644 index d89fb0096f..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/bsp_specs +++ /dev/null @@ -1,23 +0,0 @@ -%rename cpp old_cpp -%rename lib old_lib -%rename endfile old_endfile -%rename startfile old_startfile -%rename link old_link - -*cpp: -%(old_cpp) %{qrtems: -D__embedded__} -Asystem(embedded) - -*lib: -%{!qrtems: %(old_lib)} %{qrtems: --start-group \ -%{!qrtems_debug: -lrtemsall} %{qrtems_debug: -lrtemsall_g} \ --lc -lgcc --end-group ecrtn%O%s \ -%{!qnolinkcmds: -T linkcmds%s}} - -*startfile: -%{!qrtems: %(old_startfile)} %{qrtems: ecrti%O%s \ -%{!qrtems_debug: start.o%s} \ -%{qrtems_debug: start_g.o%s}} - -*link: -%{!qrtems: %(old_link)} %{qrtems: -Qy -dp -Bstatic -T linkcmds%s -e __rtems_entry_point -u __vectors} - diff --git a/c/src/lib/libbsp/powerpc/mcp750/clock/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/clock/Makefile.in deleted file mode 100644 index 4490d4b392..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/clock/Makefile.in +++ /dev/null @@ -1,66 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = powerpc/mcp750/clock - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/clock - -# C source names, if any, go here -- minus the .c -C_PIECES = p_clock -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/console/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/console/Makefile.in deleted file mode 100644 index 71ccd2bf98..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/console/Makefile.in +++ /dev/null @@ -1,66 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = powerpc/mcp750/console - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/console:@srcdir@/../../../shared - -# C source names, if any, go here -- minus the .c -C_PIECES = polled_io uart console inch -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/console/consoleIo.h \ - $(srcdir)/../../shared/console/keyboard.h \ - $(srcdir)/../../shared/console/uart.h - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(S_O_FILES) $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -CC_PIECES = -CC_FILES = $(CC_PIECES:%=%.cc) -CC_O_FILES = $(CC_PIECES:%=${ARCH}/%.o) - -# -# (OPTIONAL) Add local stuff here using += -# - -CPPFLAGS += -DSTATIC_LOG_ALLOC -CFLAGS += -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want - -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -all: ${ARCH} $(SRCS) ${OBJS} - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/include/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/include/Makefile.in deleted file mode 100644 index a7d0a6e46e..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/include/Makefile.in +++ /dev/null @@ -1,60 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = powerpc/mcp750/include - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -H_FILES = $(srcdir)/../../shared/include/nvram.h \ - $(srcdir)/../../shared/include/bsp.h \ - $(srcdir)/../../../shared/include/coverhd.h - -BSP_H_FILES = $(srcdir)/../../shared/console/consoleIo.h \ - $(srcdir)/../../shared/console/uart.h $(srcdir)/../../shared/irq/irq.h \ - $(srcdir)/../../shared/motorola/motorola.h - -# -# Equate files are for including from assembly preprocessed by -# gm4 or gasp. No examples are provided except for those for -# other CPUs. The best way to generate them would be to -# provide a program which generates the constants used based -# on the C equivalents. -# - -EQ_FILES = - -SRCS = $(H_FILES) $(EQ_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -preinstall: - $(mkinstalldirs) $(PROJECT_INCLUDE) - $(mkinstalldirs) $(PROJECT_INCLUDE)/bsp - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE) - @$(INSTALL_CHANGE) -m 644 $(BSP_H_FILES) $(PROJECT_INCLUDE)/bsp - -all: $(SRCS) preinstall - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/irq/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/irq/Makefile.in deleted file mode 100644 index 2f9bb6ae04..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/irq/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = powerpc/mcp750/irq - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/irq - -# C source names, if any, go here -- minus the .c -C_PIECES = irq_init i8259 irq -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/irq/irq.h - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = irq_asm -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) ${OBJS} - -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/motorola/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/motorola/Makefile.in deleted file mode 100644 index 614960112f..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/motorola/Makefile.in +++ /dev/null @@ -1,66 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = powerpc/mcp750/motorola - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/motorola - -# C source names, if any, go here -- minus the .c -C_PIECES = motorola -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/motorola/motorola.h - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/openpic/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/openpic/Makefile.in deleted file mode 100644 index 2f3e2c2c23..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/openpic/Makefile.in +++ /dev/null @@ -1,72 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = powerpc/mcp750/openpic - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/openpic - -# C source names, if any, go here -- minus the .c -C_PIECES = $(OPENPIC_C_PIECES) -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/openpic/openpic.h - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -OPENPIC_C_PIECES = openpic - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -preinstall: - @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp - -all: ${ARCH} $(SRCS) preinstall $(OBJS) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/pci/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/pci/Makefile.in deleted file mode 100644 index b2192fb262..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/pci/Makefile.in +++ /dev/null @@ -1,70 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = powerpc/mcp750/pci - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/pci - -# C source names, if any, go here -- minus the .c -C_PIECES = pci -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/pci/pci.h - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -preinstall: - @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp - -all: ${ARCH} $(SRCS) preinstall $(OBJS) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/residual/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/residual/Makefile.in deleted file mode 100644 index e94f6fdb6f..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/residual/Makefile.in +++ /dev/null @@ -1,73 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = powerpc/mcp750/residual - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/residual - -# C source names, if any, go here -- minus the .c -C_PIECES = $(RESIDUAL_C_PIECES) -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/residual/pnp.h \ - $(srcdir)/../../shared/residual/residual.h - -SRCS = $(C_FILES) $(H_FILES) -OBJS = $(C_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -RESIDUAL_C_PIECES = residual - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -preinstall: - @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp - -all: ${ARCH} $(SRCS) preinstall $(OBJS) - -# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile -install: all - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/start/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/start/Makefile.in deleted file mode 100644 index 704bfeb8e8..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/start/Makefile.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = powerpc/mcp750/start - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../../shared/start - -PGM = ${ARCH}/start.o - -# C source names, if any, go here -- minus the .c -C_PIECES = -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .S -S_PIECES = start -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) $(PGM) - $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/startup/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/startup/Makefile.in deleted file mode 100644 index faf523d8c4..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/startup/Makefile.in +++ /dev/null @@ -1,74 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = powerpc/mcp750/startup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../console:@srcdir@/../../../shared:@srcdir@/../../shared/startup - -# C source names, if any, go here -- minus the .c -C_PIECES = bootcard main bspstart bsppost bsplibc sbrk bspclean \ - gnatinstallhandler -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_RELEASE)/lib - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) $(OBJS) - $(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib - $(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib - -$(PROJECT_RELEASE)/lib/libbsp.a: - cd ../wrapup; $(MAKE) $(AM_MAKEFLAGS) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/startup/linkcmds b/c/src/lib/libbsp/powerpc/mcp750/startup/linkcmds deleted file mode 100644 index 0eb6628de9..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/startup/linkcmds +++ /dev/null @@ -1,147 +0,0 @@ -OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc", - "elf32-powerpc") -OUTPUT_ARCH(powerpc) -ENTRY(_start) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -PROVIDE (__stack = 0); -MEMORY { - VECTORS : ORIGIN = 0x0 , LENGTH = 0x3000 - CODE : ORIGIN = 0x3000 , LENGTH = 0x100000 -} -SECTIONS -{ - .entry_point_section : - { - *(.entry_point_section) - } > VECTORS - - /* - * This section is used only if NO_DYNAMIC_EXCEPTION_VECTOR_INSTALL - * is defined in vectors/vectors.S - */ - .vectors : - { - *(.vectors) - } > VECTORS - - /* Read-only sections, merged into text segment: */ - .interp : { *(.interp) } > CODE - .hash : { *(.hash) } > CODE - .dynsym : { *(.dynsym) } > CODE - .dynstr : { *(.dynstr) } > CODE - .gnu.version : { *(.gnu.version) } > CODE - .gnu.version_d : { *(.gnu.version_d) } > CODE - .gnu.version_r : { *(.gnu.version_r) } > CODE - .rela.text : - { *(.rela.text) *(.rela.gnu.linkonce.t*) } > CODE - .rela.data : - { *(.rela.data) *(.rela.gnu.linkonce.d*) } > CODE - .rela.rodata : - { *(.rela.rodata) *(.rela.gnu.linkonce.r*) } > CODE - .rela.got : { *(.rela.got) } > CODE - .rela.got1 : { *(.rela.got1) } > CODE - .rela.got2 : { *(.rela.got2) } > CODE - .rela.ctors : { *(.rela.ctors) } > CODE - .rela.dtors : { *(.rela.dtors) } > CODE - .rela.init : { *(.rela.init) } > CODE - .rela.fini : { *(.rela.fini) } > CODE - .rela.bss : { *(.rela.bss) } > CODE - .rela.plt : { *(.rela.plt) } > CODE - .rela.sdata : { *(.rela.sdata) } > CODE - .rela.sbss : { *(.rela.sbss) } > CODE - .rela.sdata2 : { *(.rela.sdata2) } > CODE - .rela.sbss2 : { *(.rela.sbss2) } > CODE - .text : - { - *(.text) - /* .gnu.warning sections are handled specially by elf32.em. */ - *(.gnu.warning) - *(.gnu.linkonce.t*) - } > CODE - .init : { *(.init) } > CODE - .fini : { *(.fini) } > CODE - .rodata : { *(.rodata) *(.gnu.linkonce.r*) } > CODE - .rodata1 : { *(.rodata1) } > CODE - _etext = .; - PROVIDE (etext = .); - .sdata2 : { *(.sdata2) } > CODE - .sbss2 : { *(.sbss2) } > CODE - /* Adjust the address for the data segment. We want to adjust up to - the same address within the page on the next page up. It would - be more correct to do this: - . = ALIGN(0x40000) + (ALIGN(8) & (0x40000 - 1)); - The current expression does not correctly handle the case of a - text segment ending precisely at the end of a page; it causes the - data segment to skip a page. The above expression does not have - this problem, but it will currently (2/95) cause BFD to allocate - a single segment, combining both text and data, for this case. - This will prevent the text segment from being shared among - multiple executions of the program; I think that is more - important than losing a page of the virtual address space (note - that no actual memory is lost; the page which is skipped can not - be referenced). */ - . = ALIGN(0x1000); - .data : - { - *(.data) - *(.gnu.linkonce.d*) - CONSTRUCTORS - } > CODE - .data1 : { *(.data1) } > CODE - PROVIDE (__EXCEPT_START__ = .); - .gcc_except_table : { *(.gcc_except_table) } > CODE - PROVIDE (__EXCEPT_END__ = .); - .got1 : { *(.got1) } > CODE - .dynamic : { *(.dynamic) } > CODE - /* Put .ctors and .dtors next to the .got2 section, so that the pointers - get relocated with -mrelocatable. Also put in the .fixup pointers. - The current compiler no longer needs this, but keep it around for 2.7.2 */ - PROVIDE (_GOT2_START_ = .); - .got2 : { *(.got2) } > CODE - PROVIDE (__CTOR_LIST__ = .); - .ctors : { *(.ctors) } > CODE - PROVIDE (__CTOR_END__ = .); - PROVIDE (__DTOR_LIST__ = .); - .dtors : { *(.dtors) } > CODE - PROVIDE (__DTOR_END__ = .); - PROVIDE (_FIXUP_START_ = .); - .fixup : { *(.fixup) } > CODE - PROVIDE (_FIXUP_END_ = .); - PROVIDE (_GOT2_END_ = .); - PROVIDE (_GOT_START_ = .); - .got : { *(.got) } > CODE - .got.plt : { *(.got.plt) } > CODE - PROVIDE (_GOT_END_ = .); - /* We want the small data sections together, so single-instruction offsets - can access them all, and initialized data all before uninitialized, so - we can shorten the on-disk segment size. */ - .sdata : { *(.sdata) } > CODE - _edata = .; - PROVIDE (edata = .); - .sbss : - { - PROVIDE (__sbss_start = .); - *(.sbss) - *(.scommon) - *(.dynsbss) - PROVIDE (__sbss_end = .); - } > CODE - .plt : { *(.plt) } > CODE - .bss : - { - PROVIDE (__bss_start = .); - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(16); - } > CODE - . = ALIGN(16); - _end = . ; - __rtems_end = . ; - PROVIDE (end = .); - /DISCARD/ : - { - *(.comment) - } -} diff --git a/c/src/lib/libbsp/powerpc/mcp750/times.mcp750 b/c/src/lib/libbsp/powerpc/mcp750/times.mcp750 deleted file mode 100644 index 2b637d66c5..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/times.mcp750 +++ /dev/null @@ -1,189 +0,0 @@ -#
-# Timing Test Suite Results for this BSP on the MCP750
-#
-# $Id$
-#
-
-Thanks to Eric Valette <valette@crf.canon.fr> for running the timing
-tests and reporting this information.
-
-Target: 300 Mhz MCP750
-CPU: MPC750
-Clock Speed: 300 Mhz
-
-Times are reported in nanoseconds.
-
-Context Switch
-
-context switch: self_______________________________________________0.708
-context switch: to another task____________________________________0.649
-context switch: no floating point contexts_________________________2.360
-fp context switch: restore 1st FP task_____________________________6.490
-fp context switch: save initialized, restore initialized___________0.767
-fp context switch: save idle, restore initialized__________________0.885
-fp context switch: save idle, restore idle_________________________6.195
-
-Task Manager
-
-rtems_task_create__________________________________________________4.003
-rtems_task_ident___________________________________________________4.995
-rtems_task_start___________________________________________________1.587
-rtems_task_restart: calling task___________________________________1.788
-rtems_task_restart: suspended task -- returns to caller____________1.849
-rtems_task_restart: blocked task -- returns to caller______________2.082
-rtems_task_restart: ready task -- returns to caller________________1.863
-rtems_task_restart: suspended task -- preempts caller______________3.102
-rtems_task_restart: blocked task -- preempts caller_______________12.744
-rtems_task_restart: ready task -- preempts caller__________________3.009
-rtems_task_delete: calling task____________________________________6.592
-rtems_task_delete: suspended task__________________________________3.460
-rtems_task_delete: blocked task____________________________________3.555
-rtems_task_delete: ready task______________________________________3.797
-rtems_task_suspend: calling task___________________________________3.066
-rtems_task_suspend: returns to caller______________________________0.774
-rtems_task_resume: task readied -- returns to caller_______________0.733
-rtems_task_resume: task readied -- preempts caller_________________1.634
-rtems_task_set_priority: obtain current priority___________________0.524
-rtems_task_set_priority: returns to caller_________________________0.970
-rtems_task_set_priority: preempts caller___________________________3.686
-rtems_task_mode: obtain current mode_______________________________0.233
-rtems_task_mode: no reschedule_____________________________________0.231
-rtems_task_mode: reschedule -- returns to caller___________________1.711
-rtems_task_mode: reschedule -- preempts caller_____________________3.304
-rtems_task_get_note________________________________________________0.549
-rtems_task_set_note________________________________________________0.548
-rtems_task_wake_after: yield -- returns to caller__________________3.063
-rtems_task_wake_after: yields -- preempts caller___________________3.063
-rtems_task_wake_when_______________________________________________3.906
-
-Interrupt Manager
-
-interrupt entry overhead: returns to nested interrupt______________1.947
-interrupt entry overhead: returns to interrupted task______________2.891
-interrupt entry overhead: returns to preempting task_______________0.767
-interrupt exit overhead: returns to nested interrupt_______________0.177
-interrupt exit overhead: returns to interrupted task_______________0.885
-interrupt exit overhead: returns to preempting task________________2.950
-
-Clock Manager
-
-rtems_clock_set____________________________________________________1.380
-rtems_clock_get____________________________________________________0.164
-rtems_clock_tick___________________________________________________5.487
-
-Timer Manager
-
-rtems_timer_create_________________________________________________0.959
-rtems_timer_ident__________________________________________________4.822
-rtems_timer_delete: inactive_______________________________________0.749
-rtems_timer_delete: active_________________________________________0.815
-rtems_timer_fire_after: inactive___________________________________1.047
-rtems_timer_fire_after: active_____________________________________0.951
-rtems_timer_fire_when: inactive____________________________________1.145
-rtems_timer_fire_when: active______________________________________1.133
-rtems_timer_reset: inactive________________________________________0.848
-rtems_timer_reset: active__________________________________________0.892
-rtems_timer_cancel: inactive_______________________________________0.500
-rtems_timer_cancel: active_________________________________________0.552
-
-Semaphore Manager
-
-rtems_semaphore_create 4.248
-rtems_semaphore_ident______________________________________________5.614
-rtems_semaphore_delete_____________________________________________3.953
-rtems_semaphore_obtain: available__________________________________0.639
-rtems_semaphore_obtain: not available -- NO_WAIT___________________0.638
-rtems_semaphore_obtain: not available -- caller blocks_____________3.914
-rtems_semaphore_release: no waiting tasks__________________________0.825
-rtems_semaphore_release: task readied -- returns to caller_________1.175
-rtems_semaphore_release: task readied -- preempts caller___________2.789
-
-Message Queue Manager
-
-rtems_message_queue_create________________________________________48.380
-rtems_message_queue_ident__________________________________________4.936
-rtems_message_queue_delete_________________________________________2.891
-rtems_message_queue_send: no waiting tasks_________________________1.149
-rtems_message_queue_send: task readied -- returns to caller________1.489
-rtems_message_queue_send: task readied -- preempts caller__________3.000
-rtems_message_queue_urgent: no waiting tasks_______________________1.145
-rtems_message_queue_urgent: task readied -- returns to caller______1.508
-rtems_message_queue_urgent: task readied -- preempts caller________2.961
-rtems_message_queue_broadcast: no waiting tasks____________________0.866
-rtems_message_queue_broadcast: task readied -- returns to caller___9.735
-rtems_message_queue_broadcast: task readied -- preempts caller_____2.891
-rtems_message_queue_receive: available_____________________________0.874
-rtems_message_queue_receive: not available -- NO_WAIT______________0.757
-rtems_message_queue_receive: not available -- caller blocks________4.091
-rtems_message_queue_flush: no messages flushed_____________________0.554
-rtems_message_queue_flush: messages flushed________________________0.605
-
-Event Manager
-
-rtems_event_send: no task readied__________________________________0.542
-rtems_event_send: task readied -- returns to caller________________1.196
-rtems_event_send: task readied -- preempts caller__________________2.558
-rtems_event_receive: obtain current events_________________________0.082
-rtems_event_receive: available_____________________________________0.590
-rtems_event_receive: not available -- NO_WAIT______________________0.551
-rtems_event_receive: not available -- caller blocks________________3.545
-
-Signal Manager
-
-rtems_signal_catch_________________________________________________0.944
-rtems_signal_send: returns to caller_______________________________3.186
-rtems_signal_send: signal to self__________________________________5.959
-exit ASR overhead: returns to calling task_________________________2.950
-exit ASR overhead: returns to preempting task______________________1.180
-
-Partition Manager
-
-rtems_partition_create____________________________________________17.464
-rtems_partition_ident______________________________________________4.810
-rtems_partition_delete_____________________________________________1.475
-rtems_partition_get_buffer: available______________________________3.304
-rtems_partition_get_buffer: not available__________________________0.472
-rtems_partition_return_buffer______________________________________1.947
-
-Region Manager
-
-rtems_region_create________________________________________________4.425
-rtems_region_ident_________________________________________________4.917
-rtems_region_delete________________________________________________1.829
-rtems_region_get_segment: available________________________________1.121
-rtems_region_get_segment: not available -- NO_WAIT_________________1.770
-rtems_region_get_segment: not available -- caller blocks___________6.667
-rtems_region_return_segment: no waiting tasks______________________0.944
-rtems_region_return_segment: task readied -- returns to caller_____1.298
-rtems_region_return_segment: task readied -- preempts caller_______9.322
-
-Dual-Ported Memory Manager
-
-rtems_port_create__________________________________________________6.372
-rtems_port_ident___________________________________________________4.803
-rtems_port_delete__________________________________________________3.245
-rtems_port_internal_to_external____________________________________0.490
-rtems_port_external_to_internal____________________________________0.502
-
-IO Manager
-
-rtems_io_initialize________________________________________________0.090
-rtems_io_open______________________________________________________0.075
-rtems_io_close_____________________________________________________0.086
-rtems_io_read______________________________________________________0.069
-rtems_io_write_____________________________________________________0.082
-rtems_io_control___________________________________________________0.081
-
-Rate Monotonic Manager
-
-rtems_rate_monotonic_create________________________________________7.080
-rtems_rate_monotonic_ident_________________________________________4.814
-rtems_rate_monotonic_cancel________________________________________5.369
-rtems_rate_monotonic_delete: active________________________________1.121
-rtems_rate_monotonic_delete: inactive______________________________4.248
-rtems_rate_monotonic_period: obtain status_________________________2.419
-rtems_rate_monotonic_period: initiate period -- returns to caller__9.204
-rtems_rate_monotonic_period: conclude periods -- caller blocks_____2.131
-
-
-
diff --git a/c/src/lib/libbsp/powerpc/mcp750/times.mvme2307 b/c/src/lib/libbsp/powerpc/mcp750/times.mvme2307 deleted file mode 100644 index 1bf3fbe064..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/times.mvme2307 +++ /dev/null @@ -1,205 +0,0 @@ -# -# Timing Test Suite Results for this BSP on the MVME2307 -# -# $Id$ -# - -Thanks to Jay Kulpinski (jskulpin@eng01.gdds.com) for providing these -times. - -Board: Motorola MVME2307 -CPU: MPC604 -Clock Speed: 300MHz -Memory Configuration: 64MB, ECC Enabled (ECC-Memory Detected) -L2Cache: NONE -Wait States: - -Times Reported in: microseconds -Timer Source: on-CPU cycle counter - -Column X: -Column Y: - -# DESCRIPTION A -== ================================================================= ========= - 1 rtems_semaphore_create 16.493 - rtems_semaphore_delete 16.673 - rtems_semaphore_obtain: available 10.381 - rtems_semaphore_obtain: not available -- NO_WAIT 10.383 - rtems_semaphore_release: no waiting tasks 12.071 - - 2 rtems_semaphore_obtain: not available -- caller blocks 31.929 - - 3 rtems_semaphore_release: task readied -- preempts caller 26.442 - - 4 rtems_task_restart: blocked task -- preempts caller 46.073 - rtems_task_restart: ready task -- preempts caller 41.153 - rtems_semaphore_release: task readied -- returns to caller 16.709 - rtems_task_create 50.860 - rtems_task_start 20.581 - rtems_task_restart: suspended task -- returns to caller 23.807 - rtems_task_delete: suspended task 39.714 - rtems_task_restart: ready task -- returns to caller 24.737 - rtems_task_restart: blocked task -- returns to caller 28.471 - rtems_task_delete: blocked task 41.008 - - 5 rtems_task_suspend: calling task 25.204 - rtems_task_resume: task readied -- preempts caller 22.296 - - 6 rtems_task_restart: calling task 30.990 - rtems_task_suspend: returns to caller 11.582 - rtems_task_resume: task readied -- returns to caller 12.620 - rtems_task_delete: ready task 40.913 - - 7 rtems_task_restart: suspended task -- preempts caller 38.087 - - 8 rtems_task_set_priority: obtain current priority 9.727 - rtems_task_set_priority: returns to caller 17.030 - rtems_task_mode: obtain current mode 3.768 - rtems_task_mode: no reschedule 3.766 - rtems_task_mode: reschedule -- returns to caller 5.933 - rtems_task_mode: reschedule -- preempts caller 22.613 - rtems_task_set_note 10.115 - rtems_task_get_note 10.236 - rtems_clock_set 21.466 - rtems_clock_get 2.286 - - 9 rtems_message_queue_create 40.373 - rtems_message_queue_send: no waiting tasks 20.370 - rtems_message_queue_urgent: no waiting tasks 20.397 - rtems_message_queue_receive: available 17.799 - rtems_message_queue_flush: no messages flushed 9.405 - rtems_message_queue_flush: messages flushed 10.945 - rtems_message_queue_delete 19.673 - -10 rtems_message_queue_receive: not available -- NO_WAIT 11.778 - rtems_message_queue_receive: not available -- caller blocks 32.770 - -11 rtems_message_queue_send: task readied -- preempts caller 33.719 - -12 rtems_message_queue_send: task readied -- returns to caller 23.653 - -13 rtems_message_queue_urgent: task readied -- preempts caller 33.713 - -14 rtems_message_queue_urgent: task readied -- returns to caller 23.651 - -15 rtems_event_receive: obtain current events 1.275 - rtems_event_receive: not available -- NO_WAIT 9.193 - rtems_event_receive: not available -- caller blocks 27.196 - rtems_event_send: no task readied 9.437 - rtems_event_receive: available 9.653 - rtems_event_send: task readied -- returns to caller 15.845 - -16 rtems_event_send: task readied -- preempts caller 26.008 - -17 rtems_task_set_priority: preempts caller 30.872 - -18 rtems_task_delete: calling task 53.748 - -19 rtems_signal_catch 7.253 - rtems_signal_send: returns to caller 11.993 - rtems_signal_send: signal to self 17.633 - exit ASR overhead: returns to calling task 14.933 - exit ASR overhead: returns to preempting task 18.413 - -20 rtems_partition_create 18.473 - rtems_region_create 14.573 - rtems_partition_get_buffer: available 11.153 - rtems_partition_get_buffer: not available 9.593 - rtems_partition_return_buffer 12.233 - rtems_partition_delete 11.633 - rtems_region_get_segment: available 12.533 - rtems_region_get_segment: not available -- NO_WAIT 11.633 - rtems_region_return_segment: no waiting tasks 13.613 - rtems_region_get_segment: not available -- caller blocks 37.673 - rtems_region_return_segment: task readied -- preempts caller 36.233 - rtems_region_return_segment: task readied -- returns to caller 23.153 - rtems_region_delete 12.353 - rtems_io_initialize 1.255 - rtems_io_open 1.096 - rtems_io_close 1.095 - rtems_io_read 1.097 - rtems_io_write 1.096 - rtems_io_control 1.097 - -21 rtems_task_ident 47.737 - rtems_message_queue_ident 46.548 - rtems_semaphore_ident 53.196 - rtems_partition_ident 46.545 - rtems_region_ident 47.380 - rtems_port_ident 46.540 - rtems_timer_ident 46.548 - rtems_rate_monotonic_ident 46.545 - -22 rtems_message_queue_broadcast: task readied -- returns to caller 31.193 - rtems_message_queue_broadcast: no waiting tasks 13.872 - rtems_message_queue_broadcast: task readied -- preempts caller 37.853 - -23 rtems_timer_create 9.353 - rtems_timer_fire_after: inactive 14.732 - rtems_timer_fire_after: active 15.913 - rtems_timer_cancel: active 9.855 - rtems_timer_cancel: inactive 8.692 - rtems_timer_reset: inactive 13.533 - rtems_timer_reset: active 14.703 - rtems_timer_fire_when: inactive 19.015 - rtems_timer_fire_when: active 18.997 - rtems_timer_delete: active 12.040 - rtems_timer_delete: inactive 10.825 - rtems_task_wake_when 32.645 - -24 rtems_task_wake_after: yield -- returns to caller 6.760 - rtems_task_wake_after: yields -- preempts caller 22.005 - -25 rtems_clock_tick 6.533 - -26 _ISR_Disable 0.353 - _ISR_Flash 0.053 - _ISR_Enable 0.000 - _Thread_Disable_dispatch 0.353 - _Thread_Enable_dispatch 5.513 - _Thread_Set_state 5.513 - _Thread_Disptach (NO FP) 19.073 - context switch: no floating point contexts 16.253 - context switch: self 6.953 - context switch: to another task 7.013 - context switch: restore 1st FP task 22.673 - fp context switch: save idle, restore idle 25.733 - fp context switch: save idle, restore initialized 16.253 - fp context switch: save initialized, restore initialized 16.673 - _Thread_Resume 6.833 - _Thread_Unblock 4.733 - _Thread_Ready 4.793 - _Thread_Get 2.273 - _Semaphore_Get 2.073 - _Thread_Get: invalid id 0.274 - -27 interrupt entry overhead: returns to interrupted task 7.013 - interrupt exit overhead: returns to interrupted task 8.393 - interrupt entry overhead: returns to nested interrupt 4.733 - interrupt exit overhead: returns to nested interrupt 7.073 - interrupt entry overhead: returns to preempting task 5.093 - interrupt exit overhead: returns to preempting task 23.513 - -28 rtems_port_create 12.473 - rtems_port_external_to_internal 9.130 - rtems_port_internal_to_external 9.130 - rtems_port_delete 11.873 - -29 rtems_rate_monotonic_create 11.813 - rtems_rate_monotonic_period: initiate period -- returns to caller 17.753 - rtems_rate_monotonic_period: obtain status 9.533 - rtems_rate_monotonic_cancel 13.313 - rtems_rate_monotonic_delete: inactive 12.473 - rtems_rate_monotonic_delete: active 13.193 - rtems_rate_monotonic_period: conclude periods -- caller blocks 23.236 -@ - - -1.1 -log -@Motorola MVME2307 BSP submitted by Jay Kulpinski <jskulpin@@eng01.gdds.com>. -No modifications made. -@ -text - diff --git a/c/src/lib/libbsp/powerpc/mcp750/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/vectors/Makefile.in deleted file mode 100644 index 33e1b3cefa..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/vectors/Makefile.in +++ /dev/null @@ -1,75 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = powerpc/mcp750/vectors - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@:@srcdir@/../console:@srcdir@/../../shared/vectors - -# C source names, if any, go here -- minus the .c -C_PIECES = vectors_init -C_FILES = $(C_PIECES:%=%.c) -C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) - -H_FILES = $(srcdir)/../../shared/vectors/vectors.h - -# Assembly source names, if any, go here -- minus the .s -S_PIECES = vectors -S_FILES = $(S_PIECES:%=%.S) -S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o) - -SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES) - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ -mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs - -INSTALLDIRS = $(PROJECT_INCLUDE)/bsp - -$(INSTALLDIRS): - @$(mkinstalldirs) $(INSTALLDIRS) - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(PGM): ${OBJS} - $(make-rel) - -preinstall: - @$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp - @$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(PGM) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status diff --git a/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in deleted file mode 100644 index 294ba38a89..0000000000 --- a/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in +++ /dev/null @@ -1,59 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = ../../.. -subdir = powerpc/mcp750/wrapup - -RTEMS_ROOT = @RTEMS_ROOT@ -PROJECT_ROOT = @PROJECT_ROOT@ - -VPATH = @srcdir@ - -BSP_PIECES = clock console irq openpic pci residual startup vectors motorola -GENERIC_PIECES = - -# bummer; have to use $foreach since % pattern subst rules only replace 1x -OBJS = $(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/*.o) \ - $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/*.o) -LIB = $(ARCH)/libbsp.a - -include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg -include $(RTEMS_ROOT)/make/lib.cfg - -INSTALL_CHANGE = @INSTALL_CHANGE@ - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(LIB): ${OBJS} - $(make-library) - -all: ${ARCH} $(SRCS) $(LIB) - $(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status |