bsps: Move PCI drivers to bsps

This patch is a part of the BSP source reorganization.

Update #3285.

1 files changed, 0 insertions, 66 deletions

diff --git a/c/src/lib/libbsp/powerpc/beatnik/pci/pci_io_remap.h b/c/src/lib/libbsp/powerpc/beatnik/pci/pci_io_remap.h
deleted file mode 100644
index 533519a2ae..0000000000
--- a/c/src/lib/libbsp/powerpc/beatnik/pci/pci_io_remap.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef RTEMS_PCI_IO_REMAP_H
-#define RTEMS_PCI_IO_REMAP_H
-/* Reconfigure all I/O base address registers for a range of PCI busses
- * (from and including 'bus_from' up to and not including 'bus_to').
- * adding an offset. This involves adjusting the base and limit registers
- * of PCI-PCI bridges, too.
- *
- * RESTRICTIONS: 'offset' must be 4k aligned (PCI req.); no argument check
- * 			on the bus numbers is done.
- *
- * RETURNS: 0 on success and a number > 0 indicating the number of
- *          non-32bit bridges found where the offset couldn't be added.
- *          Devices behind such a bridge are not accessible through I/O
- *          and should probably be switched off (not done by this code).
- */
-
-int
-rtems_pci_io_remap(int bus_from, int bus_to, uint32_t offset);
-
-/* 
- * Authorship
- * ----------
- * This software ('beatnik' RTEMS BSP for MVME6100 and MVME5500) was
- *     created by Till Straumann <strauman@slac.stanford.edu>, 2005-2007,
- * 	   Stanford Linear Accelerator Center, Stanford University.
- * 
- * Acknowledgement of sponsorship
- * ------------------------------
- * The 'beatnik' BSP was produced by
- *     the Stanford Linear Accelerator Center, Stanford University,
- * 	   under Contract DE-AC03-76SFO0515 with the Department of Energy.
- * 
- * Government disclaimer of liability
- * ----------------------------------
- * Neither the United States nor the United States Department of Energy,
- * nor any of their employees, makes any warranty, express or implied, or
- * assumes any legal liability or responsibility for the accuracy,
- * completeness, or usefulness of any data, apparatus, product, or process
- * disclosed, or represents that its use would not infringe privately owned
- * rights.
- * 
- * Stanford disclaimer of liability
- * --------------------------------
- * Stanford University makes no representations or warranties, express or
- * implied, nor assumes any liability for the use of this software.
- * 
- * Stanford disclaimer of copyright
- * --------------------------------
- * Stanford University, owner of the copyright, hereby disclaims its
- * copyright and all other rights in this software.  Hence, anyone may
- * freely use it for any purpose without restriction.  
- * 
- * Maintenance of notices
- * ----------------------
- * In the interest of clarity regarding the origin and status of this
- * SLAC software, this and all the preceding Stanford University notices
- * are to remain affixed to any copy or derivative of this software made
- * or distributed by the recipient and are to be affixed to any copy of
- * software made or distributed by the recipient that contains a copy or
- * derivative of this software.
- * 
- * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
- */ 
-
-#endif
-