RTEMS: Delete ChangeLog files.

This commit deletes all RTEMS ChangeLog files. These files have been abandoned
since converting to git version control. The historical data may be recovered
by checking out any commit before this one. Most of the contents of these
ChangeLog files can also be found in the git log.

Two external ChangeLog files, ChangeLog.slac and ChangeLog.zlib, remain.

1 files changed, 0 insertions, 136 deletions

diff --git a/c/src/lib/libbsp/mips/shared/gdbstub/ChangeLog b/c/src/lib/libbsp/mips/shared/gdbstub/ChangeLog
deleted file mode 100644
index 8a034fb7d4..0000000000
--- a/c/src/lib/libbsp/mips/shared/gdbstub/ChangeLog
+++ /dev/null
@@ -1,136 +0,0 @@
-2003-07-17	Joel Sherrill <joel@OARcorp.com>
-
-	PR 433/tools
-	* mips-stub.c: Patch from C. M. Heard <heard@pobox.com> described as:
-
-	The purpose of the patch is to make the stub ignore all
-	characters except '+' (ack) or '-' (nak) when it has transmitted a
-	packet and expects an acknowledgment. Without the patch,
-	putpacket() will retransmit each time it receives anything other
-	than '+' when expecting an ack, and that, bitter experience has
-	found, frequently results in the stub failing to sync up when
-	initially attaching to gdb.
-
-	I think that rtems users will notice significant improvement in
-	the of the mips stub if this patch is incorporated in the
-	distribution; certainly I did in my stand-aline environment. I
-	should hasten to add that it is only an improvement and not a 100%
-	cure for synchronization problems because '+' characters can (and
-	do) during as message data, and it's still possible for these to
-	be mistaken as acks. I have no idea how to fix that short of
-	redesigning the gdb-remote protocol.
-
-2002-11-01	Joel Sherrill <joel@OARcorp.com>
-
-	* mips-stub.c: Removed warnings.
-
-2002-10-02	Joel Sherrill <joel@OARcorp.com>
-
-	* rtems-stub-glue.c: Removed should only be common copy.
-
-2002-08-14	Greg Menke <gregory.menke@gsfc.nasa.gov>
-
-	* mips-stub.c: Re-debugged a breakpoint problem, zbreak target
-	address was a char * which caused the target instruction to not
-	be fully copied, so the zbreak logic corrupted the original 
-	instruction and didn't insert a valid break instruction.
-	
-2002-03-08	Joel Sherrill <joel@OARcorp.com>
-
-	* mips-stub.c: Removed warnings.
-
-2002-03-05	Greg Menke <gregory.menke@gsfc.nasa.gov>
-
-	* mips-stub.c: Debugged & tweaked the gdb command processing,
-	zbreak stuff, breakpoint and step code.  Implemented 'T' command
-	support and debugged remote gdb support w/ the Mongoose bsp.
-	Added the memory segment support.
-	* memlimits.h: Disabled all contents in favor of memory sement
-	support.  This file could probably go away.
-	* rtems-stub-glue.c (rtems_gdb_index_to_stub_id()): New routine.
-	rtems_gdb_stub_get_register_from_context(): Implemented MIPS version.
-	rtems_gdb_stub_get_offsets(): Implemented MIPS version.
-	* README: Updated.
-
-2002-03-01	Joel Sherrill <joel@OARcorp.com>
-
-	* ChangeLog: Corrected previous entry. 
-
-2002-02-27	Greg Menke <gregory.menke@gsfc.nasa.gov>
-
-	* mips-stub.c: Modified isr install routine to
-	capture all exceptions.
-
-2001-02-27	Joel Sherrill <joel@OARcorp.com>
-
-	* Significant modifications including adding thread support, the 'X'
-	command, and reorganizing so that target CPU independent routines
-	could be reused.
-	* gdb_if.h: Added numerous prototypes.
-	* mips-stub.c: Added thread support as well as 'X' command.
-	Also noticed that the 'P' command was from the mips protocol.
-	* rtems-stub-glue.c: New file.  This file contains all generic
-	support which should be able to be reused on another target CPU.
-
-2002-02-08	Joel Sherrill <joel@OARcorp.com>
-
-	* mips-stub.c (handle_exception): Prototype changed to be an RTEMS 
-	entry point.  Added comments about possible need to flush cache.
-	(mips_gdb_stub_install): New routine.
-
-2002-02-08	Joel Sherrill <joel@OARcorp.com>
-
-	* Makefile, stubinit.S, r46kstub.ld, ioaddr.h: Removed as unused
-	with RTEMS.
-	* r46kstub.c: Renamed to mips-stub.c.
-	* mips-stub.c: New file -- was r46kstub.c.
-	* memlimits.h: New file was limits.h.
-	* limits.h: Removed.
-	* r4600.h: Eliminated need for this file.
-	* README: Updated.
- 	* gdb_if.h: Added CVS Id.
-	* mips-stub.c: Attempt to deal with MIPS1 versus MIPS3.
-
-2002-02-08	Joel Sherrill <joel@OARcorp.com>
-
-	* Merged r46kstub.c into RTEMS distribution without modification.
-	I got the code from Franz Fischer <Franz.Fischer@franz-fischer.de>
-	who had used this with an old version of RTEMS with the mips64orion
-	port of RTEMS.  After adding this to the repository, I will tailor
-	this to work with the RTEMS exception processing model and trim
-	no longer needed parts.
-	* ChangeLog, gdb_if.h, ioaddr.h, limits.h, Makefile, mips_opcode.h,
-	r4600.h, r46kstub.c, r46kstub.ld, README, stubinit.S:
-
-Sun Sep 29 16:34:53 1996  C. M. Heard <heard@vvnet.com>
-
-	* Updated snapshot posted.
-
-	* stubinit.S (_reset_exception, _general_exception): Reorder
-	instructions or insert nops as necessary to ensure that the
-	target register of mfc0, mfc1, and cfc1 instructions is not
-	used as a source register in the load delay slot of those 
-	instructions and to ensure that the instruction following
-	mtc0 is always something other than mfc0.  Insert .eject
-	directives and reformat some of the comments to make the
-	assembler listing more readable.
-
-	* ioaddr.h:  add comments pointing out implementation-
-	specific address definitions.
-
-	* limits.h:  add comments describing what the implementation-
-	specific macros in this file are supposed to do. 
-
-Tue Aug 06 14:43:04 1995  C. M. Heard <heard@vvnet.com>
-
-	* Updated snapshot posted.
-
-	* stubinit.S (_general_exception): Use virtual adresses from
-	kseg0 (cached, unmapped space) instead of kseg1 (uncached,
-	unmapped space) in cache instructions.
-	(_reset_exception): Likewise, and use the right
-	mask to clean the K0 field in the config register.
-
-Fri Jul 26 14:41:49 1995  C. M. Heard <heard@vvnet.com>
-
-	* Initial snapshot posted.