Remove (abandoned).

1 files changed, 0 insertions, 117 deletions

diff --git a/c/src/lib/libbsp/mips/p4000/startup/bspstart.c b/c/src/lib/libbsp/mips/p4000/startup/bspstart.c
deleted file mode 100644
index a9fb9bce0a..0000000000
--- a/c/src/lib/libbsp/mips/p4000/startup/bspstart.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- *  This routine starts the application.  It includes application,
- *  board, and monitor specific initialization and configuration.
- *  The generic CPU dependent initialization has been performed
- *  before this routine is invoked.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-/*
- *  Rather than deleting this, it is commented out to (hopefully) help
- *  the submitter send updates.
- *
- *  static char _sccsid[] = "@(#)bspstart.c 06/11/96     1.2\n";
- */
-
-#include <string.h>
-
-#include <bsp.h>
-#include <rtems/libio.h>
-#include <rtems/libcsupport.h>
-
-/*
- *  The original table from the application and our copy of it with
- *  some changes.
- */
-
-extern rtems_configuration_table Configuration;
-
-rtems_configuration_table  BSP_Configuration;
-
-rtems_cpu_table Cpu_table;
-
-char *rtems_progname;
-
-/*
- *  Use the shared implementations of the following routines
- */
-
-void bsp_postdriver_hook(void);
-void bsp_libc_init( void *, uint32_t, int );
-
-/*
- *  Function:   bsp_pretasking_hook
- *  Created:    95/03/10
- *
- *  Description:
- *      BSP pretasking hook.  Called just before drivers are initialized.
- *      Used to setup libc and install any BSP extensions.
- *
- *  NOTES:
- *      Must not use libc (to do io) from here, since drivers are
- *      not yet initialized.
- *
- */
-
-#define LIBC_HEAP_SIZE (64 * 1024)
-
-void bsp_pretasking_hook(void)
-{
-    extern int end;
-    uint32_t                heap_start;
-
-    heap_start = (uint32_t) &end;
-    if (heap_start & (CPU_ALIGNMENT-1))
-        heap_start = (heap_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
-
-    bsp_libc_init((void *) heap_start, LIBC_HEAP_SIZE, 0);
-
-#ifdef RTEMS_DEBUG
-    rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
-#endif
-}
-
-extern int end; /* defined by linker */
-
-/*
- *  bsp_start
- *
- *  This routine does the bulk of the system initialization.
- */
-
-void bsp_start( void )
-{
-  /*
-   *  Allocate the memory for the RTEMS Work Space.  This can come from
-   *  a variety of places: hard coded address, malloc'ed from outside
-   *  RTEMS world (e.g. simulator or primitive memory manager), or (as
-   *  typically done by stock BSPs) by subtracting the required amount
-   *  of work space from the last physical address on the CPU board.
-   */
-
-  /*
-   *  Need to "allocate" the memory for the RTEMS Workspace and
-   *  tell the RTEMS configuration where it is.  This memory is
-   *  not malloc'ed.  It is just "pulled from the air".
-   */
-
-  BSP_Configuration.work_space_start =
-       (void *)((uint64_t)((&end) + LIBC_HEAP_SIZE + 0x2000) & ~0x7);
-
-  /*
-   *  initialize the CPU table for this BSP
-   */
-
-  Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
-  Cpu_table.postdriver_hook = bsp_postdriver_hook;
-  Cpu_table.interrupt_stack_size = CONFIGURE_INTERRUPT_STACK_MEMORY;
-  Cpu_table.clicks_per_microsecond = CPU_CLOCK_RATE_MHZ;
-}