bsps: Move start files to bsps

This patch is a part of the BSP source reorganization.

Update #3285.

2 files changed, 1 insertions, 197 deletions

diff --git a/c/src/lib/libbsp/mips/jmr3904/Makefile.am b/c/src/lib/libbsp/mips/jmr3904/Makefile.am
index 5b9516beaf..9c9ffcf56d 100644
--- a/c/src/lib/libbsp/mips/jmr3904/Makefile.am
+++ b/c/src/lib/libbsp/mips/jmr3904/Makefile.am
@@ -8,7 +8,7 @@ dist_project_lib_DATA = startup/bsp_specs
 #isr
 
 
-start.$(OBJEXT): start/start.S
+start.$(OBJEXT): ../../../../../../bsps/mips/jmr3904/start/start.S
 	$(CPPASCOMPILE) -o $@ -c $<
 project_lib_DATA = start.$(OBJEXT)
 
diff --git a/c/src/lib/libbsp/mips/jmr3904/start/start.S b/c/src/lib/libbsp/mips/jmr3904/start/start.S
deleted file mode 100644
index 92c0ddd956..0000000000
--- a/c/src/lib/libbsp/mips/jmr3904/start/start.S
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * start.S -- startup file for JMR3904 BSP based upon crt0.S from
- * newlib-1.8.2/libgloss/mips and adapted for RTEMS.
- *
- * crt0.S -- startup file for MIPS.
- *
- * Copyright (c) 1995, 1996, 1997 Cygnus Support
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-#include <rtems/asm.h>
-#include <bsp/regs.h>
-
-#ifdef __mips16
-/* This file contains 32 bit assembly code.  */
-	.set nomips16
-#endif
-
-/* This is for referencing addresses that are not in the .sdata or
-   .sbss section under embedded-pic, or before we've set up gp.  */
-#ifdef __mips_embedded_pic
-# ifdef __mips64
-#  define LA(t,x) la t,x-PICBASE ; daddu t,s0,t
-# else
-#  define LA(t,x) la t,x-PICBASE ; addu t,s0,t
-# endif
-#else /* __mips_embedded_pic */
-# define LA(t,x) la t,x
-#endif /* __mips_embedded_pic */
-
-	.text
-	.align	2
-
-/* Without the following nop, GDB thinks _start is a data variable.
- * This is probably a bug in GDB in handling a symbol that is at the
- * start of the .text section.
- */
-	nop
-
-	.globl	_start
-	.ent	_start
-_start:
-	.set	noreorder
-	/* Get the address of start into $5 in a position independent fashion.
-	** This lets us know whether we have been relocated or not.
-	*/
-	$LF1 = . + 8
-	bal     $LF1
-	nop
-_branch:
-	move	$5, $31				# $5 == where are we
-	li	$6, 0x8800000c			# $6 == where we want to be
-/*	#la      $6,_branch */
-	beq	$5, $6, _start_in_ram
-	nop
-	/* relocate the code from EEPROM to RAM */
-        la	$7, _edata
-relocate:
-	lw	$8, ($5)			# $8 = *EEPROM
-	addu	$5, $5, 4			# EEPROM++
-        sw      $8, ($6)			# *RAM = $8
-	addu	$6, $6, 4			# RAM++
-	bne	$6, $7, relocate		# copied all the way to edata?
-	nop
-	la	$6, _start_in_ram
-	jr	$6
-	nop
-	.end _start
-
-	.globl	_start_in_ram
-	.ent _start_in_ram
-_start_in_ram:
-	nop
-
-#ifdef __mips_embedded_pic
-	PICBASE = .+8
-        bal	PICBASE
-	nop
-	move	s0,$31
-#endif
-
-	li	v0, SR_CU1|SR_PE|SR_FR|SR_KX|SR_SX|SR_UX
-	mtc0	v0, C0_SR
-	mtc0	zero, C0_CAUSE
-
-/* Check for FPU presence */
-#ifndef __mips_soft_float
-/* This doesn't work if there is no FPU.  We get illegal instruction
-   exceptions.  */
-	li	t2,0xAAAA5555
-	mtc1	t2,fp0		/* write to FPR 0 */
-	mtc1	zero,fp1	/* write to FPR 1 */
-	mfc1	t0,fp0
-	mfc1	t1,fp1
-	nop
-	bne	t0,t2,1f	/* check for match */
-	nop
-	bne	t1,zero,1f	/* double check */
-	nop
-#ifndef __mips64  /* Clear the FR bit */
-	li	v0, SR_CU1|SR_PE|SR_KX|SR_SX|SR_UX
-	mtc0	v0, C0_SR
-#endif
-	j	2f
-	nop
-#endif
-1:
-	li	v0, SR_PE|SR_FR|SR_KX|SR_SX|SR_UX
-	mtc0	v0, C0_SR
-2:
-/* Fix high bits, if any, of the PC so that exception handling
-   doesn't get confused.  */
-	LA (v0, 3f)
-	jr	v0
-	nop
-3:
-	LA (gp, _gp)				# set the global data pointer
-	.end _start_in_ram
-
-/*
- * zero out the bss section.
- */
-	.globl	zerobss
-	.ent	zerobss
-zerobss:
-	LA (v0, _fbss)
-	LA (v1, _end)
-3:
-	sw	zero,0(v0)
-	bltu	v0,v1,3b
-	addiu	v0,v0,4				# executed in delay slot
-
-	la	t0, _stack_init			# initialize stack so we
-	/* We must subtract 24 bytes for the 3 8 byte arguments to main, in
-	   case main wants to write them back to the stack.  The caller is
-	   supposed to allocate stack space for parameters in registers in
-	   the old MIPS ABIs.  We must do this even though we aren't passing
-	   arguments, because main might be declared to have them.
-
-	   Some ports need a larger alignment for the stack, so we subtract
-	   32, which satisifes the stack for the arguments and keeps the
-	   stack pointer better aligned.  */
-	subu	t0,t0,32
-	move	sp,t0				# set stack pointer
-	.end	zerobss
-
-	.globl	exit .text
-	.globl	init
-	.ent	init
-init:
-
-	move	a0,zero				# set command line to 0
-	jal	boot_card			# call the program start function
-	nop
-
-	/* fall through to the "exit" routine */
-	jal	_sys_exit			/* call libc exit to run the G++ */
-						/* destructors */
-	move	a0,v0				/* pass through the exit code */
-	.end	init
-
-/*
- * _sys_exit -- Exit from the application. Normally we cause a user trap
- *          to return to the ROM monitor for another run. NOTE: This is
- *	    the only other routine we provide in the crt0.o object, since
- *          it may be tied to the "_start" routine. It also allows
- *          executables that contain a complete world to be linked with
- *          just the crt0.o object.
- */
-	.globl	bsp_reset
-bsp_reset:
-	.globl	_sys_exit
-	.ent _sys_exit
-_sys_exit:
-7:
-#ifdef GCRT0
-	jal	_mcleanup
-	nop
-#endif
-	/* break instruction can cope with 0xfffff, but GAS limits the range: */
-	break	1023
-	nop
-	b	7b				# but loop back just in-case
-	nop
-	.end _sys_exit
-
-/* EOF crt0.S */