bsp/mcf5206elite: Do not install runtest script

Provide the runtest script only as a part of the sources.  This
simplifies the build system.

Test support should be included in the RTEMS Tester.

5 files changed, 0 insertions, 399 deletions

diff --git a/c/src/lib/libbsp/m68k/mcf5206elite/Makefile.am b/c/src/lib/libbsp/m68k/mcf5206elite/Makefile.am
index 4148b28366..8c31be6604 100644
--- a/c/src/lib/libbsp/m68k/mcf5206elite/Makefile.am
+++ b/c/src/lib/libbsp/m68k/mcf5206elite/Makefile.am
@@ -5,11 +5,6 @@ include $(top_srcdir)/../../bsp.am
 
 dist_project_lib_DATA = ../../../../../../bsps/m68k/mcf5206elite/start/bsp_specs
 
-
-_SUBDIRS = . tools
-
-
-
 start.$(OBJEXT): ../../../../../../bsps/m68k/mcf5206elite/start/start.S
 	$(CPPASCOMPILE) -o $@ -c $<
 project_lib_DATA = start.$(OBJEXT)
diff --git a/c/src/lib/libbsp/m68k/mcf5206elite/configure.ac b/c/src/lib/libbsp/m68k/mcf5206elite/configure.ac
index d735b281f7..24453b4008 100644
--- a/c/src/lib/libbsp/m68k/mcf5206elite/configure.ac
+++ b/c/src/lib/libbsp/m68k/mcf5206elite/configure.ac
@@ -15,8 +15,6 @@ RTEMS_BSP_CONFIGURE
 
 RTEMS_BSP_CLEANUP_OPTIONS
 
-AC_CONFIG_SUBDIRS(tools)
-
 # Explicitly list all Makefiles here
 AC_CONFIG_FILES([Makefile])
 AC_OUTPUT
diff --git a/c/src/lib/libbsp/m68k/mcf5206elite/tools/Makefile.am b/c/src/lib/libbsp/m68k/mcf5206elite/tools/Makefile.am
deleted file mode 100644
index 189a991ede..0000000000
--- a/c/src/lib/libbsp/m68k/mcf5206elite/tools/Makefile.am
+++ /dev/null
@@ -1,22 +0,0 @@
-ACLOCAL_AMFLAGS = -I ../../../../../aclocal
-
-transform =
-bsptools_bindir = ${exec_prefix}/@RTEMS_BSP@/tests
-bsptools_bin_SCRIPTS = runtest
-
-all-local: $(TMPINSTALL_FILES)
-
-TMPINSTALL_FILES =
-
-$(PROJECT_ROOT)/@RTEMS_BSP@/tests/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_ROOT)/@RTEMS_BSP@/tests
-	@: > $(PROJECT_ROOT)/@RTEMS_BSP@/tests/$(dirstamp)
-TMPINSTALL_FILES += $(PROJECT_ROOT)/@RTEMS_BSP@/tests/$(dirstamp)
-
-$(PROJECT_ROOT)/@RTEMS_BSP@/tests/runtest: runtest $(PROJECT_ROOT)/@RTEMS_BSP@/tests/$(dirstamp)
-	$(INSTALL_SCRIPT) $< $(PROJECT_ROOT)/@RTEMS_BSP@/tests/runtest
-TMPINSTALL_FILES += $(PROJECT_ROOT)/@RTEMS_BSP@/tests/runtest
-
-CLEANFILES = $(TMPINSTALL_FILES)
-
-include $(top_srcdir)/../../../../../automake/host.am
diff --git a/c/src/lib/libbsp/m68k/mcf5206elite/tools/configure.ac b/c/src/lib/libbsp/m68k/mcf5206elite/tools/configure.ac
deleted file mode 100644
index 61c7848ede..0000000000
--- a/c/src/lib/libbsp/m68k/mcf5206elite/tools/configure.ac
+++ /dev/null
@@ -1,19 +0,0 @@
-## Process this file with autoconf to produce a configure script.
-
-AC_PREREQ([2.69])
-AC_INIT([rtems-c-src-lib-libbsp-m68k-mcf5206elite-tools],[_RTEMS_VERSION],[https://devel.rtems.org/newticket])
-RTEMS_TOP(../../../../../../..)
-RTEMS_SOURCE_TOP
-RTEMS_BUILD_TOP
-
-AM_INIT_AUTOMAKE([no-define foreign subdir-objects 1.12.2])
-AM_MAINTAINER_MODE
-
-RTEMS_ENV_RTEMSBSP
-
-RTEMS_PROJECT_ROOT
-RTEMS_TOOLPATHS
-
-# Explicitly list all Makefiles here
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
diff --git a/c/src/lib/libbsp/m68k/mcf5206elite/tools/runtest b/c/src/lib/libbsp/m68k/mcf5206elite/tools/runtest
deleted file mode 100644
index 0e814b2c1b..0000000000
--- a/c/src/lib/libbsp/m68k/mcf5206elite/tools/runtest
+++ /dev/null
@@ -1,351 +0,0 @@
-#! /bin/sh -p
-#
-# Run rtems tests on the Motorola MCF5206eLITE Coldfire Evaluation board
-# using gdb configured with P&E Micro Background Debug Mode debugging
-# interface.
-#
-# This program generates a gdb script to run each test, intercept
-# serial port output and put log into output file.
-#
-# Author: Victor V. Vengerov <vvv@oktet.ru>
-# Copyright (C) 2000 OKTET Ltd., St.-Petersburg, Russia
-#
-# Partially based on runtest script for powerpc psim.
-#
-#  COPYRIGHT (c) 1989-1999.
-#  On-Line Applications Research Corporation (OAR).
-#
-#  The license and distribution terms for this file may be
-#  found in the file LICENSE in this distribution or at
-#  http://www.rtems.org/license/LICENSE.
-#
-
-# progname=`basename $0`
-progname=${0##*/}        # fast basename hack for ksh, bash
-
-USAGE=\
-"usage: $progname [ -opts ] test [ test ... ]
-	-s ttydevice -- specify serial device to be used to capture test
-                        output
-        -r baud      -- set serial port baud rate (19200 by default)
-        -b bdmdevice -- specify BDM device to be used to control the target
-        -g gdbname   -- specify name of gdb program to be used
-        -v           -- verbose output
-        -d           -- don't remove temporary files (for debugging only)
-        -i           -- use interrupt driven console I/O when test is running
-                        (many tests failed when interrupt driven console
-                        input/output is used due undetermenistic tests
-                        behaviour)
-        -p           -- use termios poll console I/O
-        -l logdir    -- specify log directory (default is 'logdir')
-
-  Specify test as 'test' or 'test.exe'.
-  All multiprocessing tests *must* be specified simply as 'mp01', etc.
-"
-
-# export everything
-set -a
-
-#   log an error to stderr
-prerr()
-{
-    echo "$*" >&2
-}
-
-fatal() {
-    [ "$1" ] && prerr $*
-    prerr "$USAGE"
-    exit 1
-}
-
-warn() {
-    [ "$1" ] && prerr $*
-}
-
-# run at normal and signalled exit
-test_exit()
-{
-    exit_code=$1
-
-    rm -f ${logfile}.tmp*
-    [ "$gdb_pid" ] && kill -9 $gdb_pid
-    [ "$serial_pid" ] && kill -9 $serial_pid
-
-    exit $exit_code
-}
-
-#
-# process the options
-#
-# defaults for getopt vars
-#
-# max_run_time is defaulted to 5 minutes
-#
-
-verbose=""
-serial_device=/dev/ttyS0
-bdm_device=/dev/bdmcf0
-gdbprog=true
-for i in rtems bdm-rtems bdm bdm-elf bdm-coff ; do
-    if m68k-$i-gdb --version > /dev/null 2>&1 ; then
-        gdbprog=m68k-$i-gdb ;
-        break ;
-    fi
-done
-logdir=log
-max_run_time=$((5 * 60))
-sizeof_ram=$((1 * 1024 * 1024))
-debugging="no"
-baudrate="19200"
-console_mode=0
-
-while getopts vdips:r:b:l: OPT
-do
-    case "$OPT" in
-	v)
-	    verbose="yes";;
-        d)
-            debugging="yes";;
-        s)
-            serial_device="$OPTARG";;
-        r)
-            baudrate="$OPTARG";;
-        b)
-            bdm_device="$OPTARG";;
-        l)
-            logdir="$OPTARG";;
-        s)
-            gdbprog="$OPTARG";;
-        p)
-            console_mode=1;;
-        i)
-            console_mode=2;;
-        *)
-            fatal;;
-    esac
-done
-
-let $((shiftcount = $OPTIND - 1))
-shift $shiftcount
-
-args=$*
-
-#
-# Run the tests
-#
-
-tests="$args"
-if [ ! "$tests" ]
-then
-     set -- `echo *.exe`
-     tests="$*"
-fi
-
-[ -d $logdir ] ||
-  mkdir $logdir || fatal "could not create log directory ($logdir)"
-
-# where the tmp files go
-trap "test_exit" 1 2 3 13 14 15
-
-for tfile in $tests
-do
-
-   tname=`basename $tfile .exe`
-   cpus="1"
-   TEST_TYPE="single"
-
-   case "$tname" in
-       # size is no longer interactive.
-       capture* | monitor* | termios* | fileio* | pppd*)
-            warn "Skipping $tname; it is interactive"
-            continue
-            ;;
-       *-node2*)
-           warn "Skipping $tname; 'runtest' runs both nodes when for *-node1"
-           continue
-           ;;
-       *-node1*)
-           warn "Running both nodes associated with $tname"
-           tname=`echo $tname | sed 's/-node.*//'`
-           TEST_TYPE="mp"
-           ;;
-       minimum*|stackchk*|*fatal*|malloctest*)
-           continue
-           ;;
-   esac
-
-   if [ "$TEST_TYPE" = "mp" ] ; then
-       fatal "MP tests not supported for this board"
-   fi
-
-   if [ $TEST_TYPE = "single" ] ; then
-     logfile=$logdir/${tname}
-     infofile=${logfile}.info
-     scriptfile=${logfile}.ss
-     gdblogfile=${logfile}.gdb
-
-     rm -f ${logfile}.tmp*
-
-     date=`date`
-     echo "Starting $tname at $date"
-
-     # Set serial port parameters
-     if ! stty -F ${serial_device} raw cs8 -cstopb cread crtscts \
-                    ispeed ${baudrate} ospeed ${baudrate} \
-                    > /dev/null 2> /dev/null ; then
-         fatal "Serial port couldn't be configured"
-     fi
-
-     # Flush serial port
-     cat ${serial_device} > /dev/null &
-     serial_pid=$!
-     sleep 1s
-     kill ${serial_pid}
-
-     # Capture serial port
-     cat ${serial_device} > $logfile &
-     serial_pid=$!
-
-     cat > "${scriptfile}" <<EOF
-target bdm $bdm_device
-set \$mbar  = 0x10000001
-set \$csar0 = \$mbar - 1 + 0x064
-set \$csmr0 = \$mbar - 1 + 0x068
-set \$cscr0 = \$mbar - 1 + 0x06E
-set \$csar1 = \$mbar - 1 + 0x070
-set \$csmr1 = \$mbar - 1 + 0x074
-set \$cscr1 = \$mbar - 1 + 0x07A
-set \$csar2 = \$mbar - 1 + 0x07C
-set \$csmr2 = \$mbar - 1 + 0x080
-set \$cscr2 = \$mbar - 1 + 0x086
-set \$csar3 = \$mbar - 1 + 0x088
-set \$csmr3 = \$mbar - 1 + 0x08C
-set \$cscr3 = \$mbar - 1 + 0x092
-set \$csar4 = \$mbar - 1 + 0x094
-set \$csmr4 = \$mbar - 1 + 0x098
-set \$cscr4 = \$mbar - 1 + 0x09E
-set \$csar5 = \$mbar - 1 + 0x0A0
-set \$csmr5 = \$mbar - 1 + 0x0A4
-set \$cscr5 = \$mbar - 1 + 0x0AA
-set \$csar6 = \$mbar - 1 + 0x0AC
-set \$csmr6 = \$mbar - 1 + 0x0B0
-set \$cscr6 = \$mbar - 1 + 0x0B6
-set \$csar7 = \$mbar - 1 + 0x0B8
-set \$csmr7 = \$mbar - 1 + 0x0BC
-set \$cscr7 = \$mbar - 1 + 0x0C2
-#  
-set *((short*) \$csar0) = 0xffe0
-set *((int*)   \$csmr0) = 0x000f0000
-set *((short*) \$cscr0) = 0x1da3
-set *((short*) \$csar1) = 0x5000
-set *((int*)   \$csmr1) = 0x00000000
-set *((short*) \$cscr1) = 0x3d43
-set *((short*) \$csar2) = 0x3000
-set *((int*)   \$csmr2) = 0x000f0000
-set *((short*) \$cscr2) = 0x1903
-set *((short*) \$csar3) = 0x4000
-set *((int*)   \$csmr3) = 0x000f0000
-set *((short*) \$cscr3) = 0x0083
-#
-load
-# Many tests not working properly when interrupt driven console I/O is used.
-set console_mode=$console_mode
-set \$pc=start
-set \$sp=0x20001ffc
-#
-break bsp_cleanup
-commands
-shell kill $serial_pid
-quit
-end
-#
-break _stop
-commands
-shell kill $serial_pid
-quit 1
-end
-#
-continue
-quit 2
-EOF
-     ${gdbprog} -x "${scriptfile}" "${tfile}" > "${gdblogfile}"  2>&1 &
-     gdb_pid=$!
-     {
-         time_run=0
-         while [ $time_run -lt $max_run_time ] ; do
-             sleep 10s
-             if kill -0 $gdb_pid 2> /dev/null ; then
-                 time_run=$((time_run+10)) ;
-             else
-                 exit 0
-             fi
-         done
-         kill -2 $serial_pid 2> /dev/null
-         kill -2 $gdb_pid 2> /dev/null
-         {
-             sleep 5s ; 
-             if kill -0 $gdb_pid 2> /dev/null ; then
-                 kill -9 $gdb_pid 2> /dev/null ;
-             fi
-             if kill -0 $serial_pid 2> /dev/null ; then
-                 kill -9 $serial_pid 2> /dev/null ;
-             fi
-         } &
-     } &
-     wait $gdb_pid
-     gdb_status=$?
-     {
-         if kill -0 $serial_pid 2> /dev/null ; then
-             kill $serial_pid 2> /dev/null ;
-         fi
-         sleep 5s ;
-         if kill -0 $serial_pid 2> /dev/null ; then
-             kill -9 $serial_pid 2> /dev/null ;
-         fi
-     } &
-     if [ $gdb_status -ge 128 ] ; then
-         ran_too_long="yes" ;
-     else
-         ran_too_long="no"
-     fi
-     if [ $gdb_status -ne 0 ] ; then
-         test_failed="yes" ;
-     else
-         test_failed="no"
-     fi
-     gdb_pid=""
-     serial_pid=""
-   fi
-
-   # Create the info files
-   {
-       echo "$date"
-       echo "Test run on: `uname -n`"
-       echo "Host Information:"
-       echo `uname -a`
-       echo
-       echo "Serial port: ${serial_device}"
-       echo "Baud rate:   ${baudrate}"
-       echo "BDM port:    ${bdm_device}"
-       echo "gdb:         `type -path ${gdbprog}`"
-
-       cat ${logfile}
-
-       if [ "$test_failed" = "yes" ] ; then
-           echo -e "\\n\\nTest did not finish normally"
-           if [ "$ran_too_long" = "yes" ] ; then
-               echo "Test killed after $max_run_time seconds"
-           fi
-       fi
-
-       echo
-       date;
-   } > ${infofile}
-   if [ "${debugging}" = "no" ] ; then
-       rm -f ${scriptfile}
-       rm -f ${gdblogfile}
-   fi
-done
-
-echo "Tests completed at " `date`
-test_exit 0