bsps: Move console drivers to bsps

This patch is a part of the BSP source reorganization.

Update #3285.

1 files changed, 0 insertions, 277 deletions

diff --git a/c/src/lib/libbsp/m68k/mvme162/console/console.c b/c/src/lib/libbsp/m68k/mvme162/console/console.c
deleted file mode 100644
index 985254d483..0000000000
--- a/c/src/lib/libbsp/m68k/mvme162/console/console.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- *  This file contains the MVME162 console IO package.
- */
-
-/*
- *  COPYRIGHT (c) 1989-2013.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- *
- *  Modifications of respective RTEMS file: COPYRIGHT (c) 1994.
- *  EISCAT Scientific Association. M.Savitski
- *
- *  This material is a part of the MVME162 Board Support Package
- *  for the RTEMS executive. Its licensing policies are those of the
- *  RTEMS above.
- */
-
-#define M162_INIT
-
-#include <rtems/bspIo.h>
-#include <rtems/console.h>
-#include <rtems/libio.h>
-#include <rtems/ringbuf.h>
-#include <bsp.h>
-
-Ring_buffer_t  Console_Buffer[2];
-
-/*
- *  Interrupt handler for receiver interrupts
- */
-static rtems_isr C_Receive_ISR(rtems_vector_number vector)
-{
-  register int    ipend, port;
-
-  ZWRITE0(1, 0x38);     /* reset highest IUS */
-
-  ipend = ZREAD(1, 3);  /* read int pending from A side */
-
-  if      (ipend == 0x04) port = 0;   /* channel B intr pending */
-  else if (ipend == 0x20) port = 1;   /* channel A intr pending */
-  else return;
-
-  Ring_buffer_Add_character(&Console_Buffer[port], ZREADD(port));
-
-  if (ZREAD(port, 1) & 0x70) {    /* check error stat */
-    ZWRITE0(port, 0x30);          /* reset error */
-  }
-}
-
-rtems_device_driver console_initialize(
-  rtems_device_major_number  major,
-  rtems_device_minor_number  minor,
-  void                      *arg
-)
-{
-  int     i;
-  rtems_status_code status;
-
-  /*
-   * Initialise receiver interrupts on both ports
-   */
-  for (i = 0; i <= 1; i++) {
-    Ring_buffer_Initialize( &Console_Buffer[i] );
-    ZWRITE(i, 2, SCC_VECTOR);
-    ZWRITE(i, 10, 0);
-    ZWRITE(i, 1, 0x10);     /* int on all Rx chars or special condition */
-    ZWRITE(i, 9, 8);        /* master interrupt enable */
-  }
-
-  set_vector(C_Receive_ISR, SCC_VECTOR, 1); /* install ISR for ports A and B */
-
-  mcchip->vector_base = 0;
-  mcchip->gen_control = 2;        /* MIEN */
-  mcchip->SCC_int_ctl = 0x13;     /* SCC IEN, IPL3 */
-
-  status = rtems_io_register_name(
-    "/dev/console",
-    major,
-    (rtems_device_minor_number) 1
-  );
-
-  if (status != RTEMS_SUCCESSFUL)
-    rtems_fatal_error_occurred(status);
-
-  status = rtems_io_register_name(
-    "/dev/tty00",
-    major,
-    (rtems_device_minor_number) 0
-  );
-
-  if (status != RTEMS_SUCCESSFUL)
-    rtems_fatal_error_occurred(status);
-
-  status = rtems_io_register_name(
-    "/dev/tty01",
-    major,
-    (rtems_device_minor_number) 1
-  );
-
-  if (status != RTEMS_SUCCESSFUL)
-    rtems_fatal_error_occurred(status);
-
-  return RTEMS_SUCCESSFUL;
-}
-
-/*
- *   Non-blocking char input
- */
-bool char_ready(int port, char *ch)
-{
-  if ( Ring_buffer_Is_empty( &Console_Buffer[port] ) )
-    return false;
-
-  Ring_buffer_Remove_character( &Console_Buffer[port], *ch );
-
-  return true;
-}
-
-/*
- *   Block on char input
- */
-static char inbyte(int port)
-{
-  char tmp_char;
-
-  while ( !char_ready(port, &tmp_char) );
-  return tmp_char;
-}
-
-/*
- *   This routine transmits a character out the SCC.  It no longer supports
- *   XON/XOFF flow control.
- */
-static void outbyte(char ch, int port)
-{
-  while (1) {
-    if (ZREAD0(port) & TX_BUFFER_EMPTY) break;
-  }
-  ZWRITED(port, ch);
-}
-
-/*
- *  Open entry point
- */
-rtems_device_driver console_open(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  return RTEMS_SUCCESSFUL;
-}
-
-/*
- *  Close entry point
- */
-rtems_device_driver console_close(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  return RTEMS_SUCCESSFUL;
-}
-
-/*
- * read bytes from the serial port. We only have stdin.
- */
-rtems_device_driver console_read(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  rtems_libio_rw_args_t *rw_args;
-  char *buffer;
-  int maximum;
-  int count = 0;
-
-  rw_args = (rtems_libio_rw_args_t *) arg;
-
-  buffer = rw_args->buffer;
-  maximum = rw_args->count;
-
-  if ( minor > 1 )
-    return RTEMS_INVALID_NUMBER;
-
-  for (count = 0; count < maximum; count++) {
-    buffer[ count ] = inbyte( minor );
-    if (buffer[ count ] == '\n' || buffer[ count ] == '\r') {
-      buffer[ count++ ]  = '\n';
-      break;
-    }
-  }
-
-  rw_args->bytes_moved = count;
-  return (count >= 0) ? RTEMS_SUCCESSFUL : RTEMS_UNSATISFIED;
-}
-
-/*
- * write bytes to the serial port. Stdout and stderr are the same.
- */
-rtems_device_driver console_write(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  int count;
-  int maximum;
-  rtems_libio_rw_args_t *rw_args;
-  char *buffer;
-
-  rw_args = (rtems_libio_rw_args_t *) arg;
-
-  buffer = rw_args->buffer;
-  maximum = rw_args->count;
-
-  if ( minor > 1 )
-    return RTEMS_INVALID_NUMBER;
-
-  for (count = 0; count < maximum; count++) {
-    if ( buffer[ count ] == '\n') {
-      outbyte('\r', minor );
-    }
-    outbyte( buffer[ count ], minor  );
-  }
-
-  rw_args->bytes_moved = maximum;
-  return 0;
-}
-
-/*
- *  IO Control entry point
- */
-rtems_device_driver console_control(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  return RTEMS_SUCCESSFUL;
-}
-
-/*
- *  _162Bug_output_char
- *
- *  Output a single character using the 162Bug functions.  The character
- *  will be written to the default output port.
- */
-static void _162Bug_output_char( char c )
-{
-  asm volatile( "moveb  %0, -(%%sp)\n\t"   /* char to output */
-                "trap   #15\n\t"           /* Trap to 162Bug */
-                ".short 0x20"              /* Code for .OUTCHR */
-    :: "d" (c) );
-}
-
-/*
- *  _BSP_output_char
- *
- *  printk() function prototyped in bspIo.h. Does not use termios.
- *
- *  If we have initialized the console device then use it, otherwise
- *  use the 162Bug routines to send it to the default output port.
- */
-static void _BSP_output_char(char c)
-{
-  _162Bug_output_char(c);
-}
-
-/* Printk function */
-BSP_output_char_function_type           BSP_output_char = _BSP_output_char;
-BSP_polling_getchar_function_type       BSP_poll_char = NULL;