diff options
author | Ralf Corsepius <ralf.corsepius@rtems.org> | 2004-04-21 10:43:04 +0000 |
---|---|---|
committer | Ralf Corsepius <ralf.corsepius@rtems.org> | 2004-04-21 10:43:04 +0000 |
commit | 6128a4aa5e791ed4e0a655bfd346a52d92da7883 (patch) | |
tree | af53ca3f67ce405b6fbc6c98399c8e0c87e01a9e /c/src/lib/libbsp/m68k/gen68340/console/console.c | |
parent | 2004-04-20 Ralf Corsepius <ralf_corsepius@rtems.org> (diff) | |
download | rtems-6128a4aa5e791ed4e0a655bfd346a52d92da7883.tar.bz2 |
Remove stray white spaces.
Diffstat (limited to '')
-rw-r--r-- | c/src/lib/libbsp/m68k/gen68340/console/console.c | 46 |
1 files changed, 23 insertions, 23 deletions
diff --git a/c/src/lib/libbsp/m68k/gen68340/console/console.c b/c/src/lib/libbsp/m68k/gen68340/console/console.c index 6035fcb8a5..bfde76f00b 100644 --- a/c/src/lib/libbsp/m68k/gen68340/console/console.c +++ b/c/src/lib/libbsp/m68k/gen68340/console/console.c @@ -7,7 +7,7 @@ * 4, rue du Clos Courtel * 35512 CESSON-SEVIGNE * FRANCE - * + * * e-mail: g_montel@yahoo.com * * COPYRIGHT (c) 1989-1999. @@ -102,7 +102,7 @@ InterruptHandler (rtems_vector_number v) else { /* this is necessary, otherwise it blocks when FIFO is full */ ch = DURBA; - rtems_termios_enqueue_raw_characters(ttypA,&ch,1); + rtems_termios_enqueue_raw_characters(ttypA,&ch,1); } } while (DUSRA & m340_Rx_RDY); Restart_Fifo_Full_A_Timer(); /* only if necessary (pointer to a fake function if @@ -142,9 +142,9 @@ InterruptHandler (rtems_vector_number v) /* push them in a trash */ ch = DURBB; } - else { + else { ch = DURBB; - rtems_termios_enqueue_raw_characters(ttypB,&ch,1); + rtems_termios_enqueue_raw_characters(ttypB,&ch,1); } } while (DUSRB & m340_Rx_RDY); @@ -189,16 +189,16 @@ InterruptWrite (int minor, const char *buf, int len) Input parameters: channel, character to emit Output parameters: - Description: wait for the UART to be ready to emit - a character and send it + a character and send it *****************************************************/ void dbug_out_char( int minor, int ch ) { if (minor==UART_CHANNEL_A) { - while (!(DUSRA & m340_Tx_RDY)) continue; + while (!(DUSRA & m340_Tx_RDY)) continue; DUTBA=ch; } else if (minor==UART_CHANNEL_B) { - while (!(DUSRB & m340_Tx_RDY)) continue; + while (!(DUSRB & m340_Tx_RDY)) continue; DUTBB=ch; } } @@ -262,7 +262,7 @@ dbugInitialise () DUCRB = m340_Reset_Transmitter; /* - * Enable serial module for normal operation, ignore FREEZE, select the crystal clock, + * Enable serial module for normal operation, ignore FREEZE, select the crystal clock, * supervisor/user serial registers unrestricted * interrupt arbitration at priority CONSOLE_INTERRUPT_ARBITRATION * WARNING : 8 bits access only on this UART! @@ -322,17 +322,17 @@ dbugInitialise () */ unset_DUIER(m340_RxRDYA&m340_TxRDYA); } - + /* * Change set of baud speeds * disable input control */ /* no good uart configuration ? */ if (uart_config.nb<1) rtems_fatal_error_occurred (-1); - - if (uart_config.baud_speed_table[UART_CHANNEL_A].set==1) + + if (uart_config.baud_speed_table[UART_CHANNEL_A].set==1) DUACR = m340_BRG_Set1; - else + else DUACR = m340_BRG_Set2; /* @@ -347,13 +347,13 @@ dbugInitialise () /* * Serial Channel Baud Speed */ - DUCSRA = (uart_config.baud_speed_table[UART_CHANNEL_A].rcs << 4) + DUCSRA = (uart_config.baud_speed_table[UART_CHANNEL_A].rcs << 4) | (uart_config.baud_speed_table[UART_CHANNEL_A].tcs); /* * Serial Channel Configuration */ - DUMR1A = m340_uart_config[UART_CHANNEL_A].parity_mode + DUMR1A = m340_uart_config[UART_CHANNEL_A].parity_mode | m340_uart_config[UART_CHANNEL_A].bits_per_char | m340_RxRTS; @@ -376,7 +376,7 @@ dbugInitialise () if (CHANNEL_ENABLED_B) { /* we mustn't set the console vector twice! */ - if ((USE_INTERRUPTS_B && !(CHANNEL_ENABLED_A)) + if ((USE_INTERRUPTS_B && !(CHANNEL_ENABLED_A)) || (USE_INTERRUPTS_B && CHANNEL_ENABLED_A && !USE_INTERRUPTS_A)) { rtems_isr_entry old_handler; rtems_status_code sc; @@ -408,7 +408,7 @@ dbugInitialise () */ unset_DUIER(m340_RxRDYB&m340_TxRDYB); } - + /* * Change set of baud speeds * disable input control @@ -416,7 +416,7 @@ dbugInitialise () /* no good uart configuration ? */ if (uart_config.nb<2) rtems_fatal_error_occurred (-1); - + /* don't set DUACR twice! */ if (!CHANNEL_ENABLED_A) { if (uart_config.baud_speed_table[UART_CHANNEL_B].set==1) @@ -437,13 +437,13 @@ dbugInitialise () /* * Serial Channel Baud Speed */ - DUCSRB = (uart_config.baud_speed_table[UART_CHANNEL_B].rcs << 4) + DUCSRB = (uart_config.baud_speed_table[UART_CHANNEL_B].rcs << 4) | (uart_config.baud_speed_table[UART_CHANNEL_B].tcs); /* * Serial Channel Configuration */ - DUMR1B = m340_uart_config[UART_CHANNEL_B].parity_mode + DUMR1B = m340_uart_config[UART_CHANNEL_B].parity_mode | m340_uart_config[UART_CHANNEL_B].bits_per_char | m340_RxRTS; @@ -479,7 +479,7 @@ SetAttributes (int minor, const struct termios *t) /* output speed */ if (t->c_cflag & CBAUDEX) osp = (t->c_cflag & CBAUD) + CBAUD + 1; - else + else osp = t->c_cflag & CBAUD; /* input speed */ @@ -633,7 +633,7 @@ rtems_device_driver console_open( return sc; } - + /****************************************************** Name: console_close Input parameters: channel #, termios args @@ -692,9 +692,9 @@ rtems_device_driver console_control( ) { rtems_libio_ioctl_args_t *args = arg; - + if (args->command == RTEMS_IO_SET_ATTRIBUTES) SetAttributes (minor, (struct termios *)args->buffer); - + return rtems_termios_ioctl (arg); } |