Renaming all BSP specific startXXX directories to use the same name (start).

1 files changed, 0 insertions, 227 deletions

diff --git a/c/src/lib/libbsp/m68k/efi332/start332/start332.c b/c/src/lib/libbsp/m68k/efi332/start332/start332.c
deleted file mode 100644
index 1029e66b2e..0000000000
--- a/c/src/lib/libbsp/m68k/efi332/start332/start332.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- *  $Id
- */
-
-#include <efi332.h>
-#include <sim.h>
-#define __START_C__
-#include "bsp.h"
-
-m68k_isr_entry M68Kvec[256];
-m68k_isr_entry vectors[256];
-char * const __argv[]= {"main", ""};
-
-void  boot_card(int argc, char * const argv[]);
-
-/*
- *  This prototype really should have the noreturn attribute but
- *  that causes a warning. Not sure how to fix that.
- */
-/* void dumby_start ()  __attribute__ ((noreturn)); */
-void dumby_start ();
-
-void  dumby_start() {
-
-  /* We need to by-pass the link instruction since the RAM chip-
-     select pins are not yet configured. */
-  asm volatile ( ".global start ;
-                  start:");
-
-  /* disable interrupts, load stack pointer */
-  asm volatile ( "oriw  #0x0700, %sr;
-                  moveal #M68Kvec, %a0;
-                  movec %a0, %vbr;
-                  movel  #_end, %d0;
-                  addl   " STACK_SIZE ",%d0;
-                  movel  %d0,%sp;
-                  movel  %d0,%a6"
-		  );
-
-  /* include in ram_init.S */
-  /*
-   * Initalize the SIM module.
-   * The stack pointer is not usable until the RAM chip select lines
-   * are configured. The following code must remain inline.
-   */
-
-  /* Module Configuration Register */
-  /*    see section(s) 3.1.3-3.1.6 of the SIM Reference Manual */
-  *SIMCR = (unsigned short int) 
-    (FRZSW | FRZBM | SAM(0,8,SHEN) | (MM*SIM_MM) | SAM(SIM_IARB,0,IARB));
-
-  /* Synthesizer Control Register */
-  /*    see section(s) 4.8 */
-  /* end include in ram_init.S */
-  *SYNCR = (unsigned short int)
-    ( SAM(EFI_W,15,W) | SAM(0x0,14,X) | SAM(EFI_Y,8,Y) | STSIM );
-  while (! (*SYNCR & SLOCK));	/* protect from clock overshoot */
-  /* include in ram_init.S */
-  *SYNCR = (unsigned short int)
-    ( SAM(EFI_W,15,W) | SAM(EFI_X,14,X) | SAM(EFI_Y,8,Y) | STSIM );
-
-  /* System Protection Control Register */
-  /*    !!! can only write to once after reset !!! */
-  /*    see section 3.8.4 of the SIM Reference Manual */
-  *SYPCR = (unsigned char)( SAM(0x3,4,SWT) | HME | BME );
-
-  /* Periodic Interrupr Control Register */
-  /*    see section 3.8.2 of the SIM Reference Manual */
-  *PICR = (unsigned short int)
-    ( SAM(0,8,PIRQL) | SAM(EFI_PIV,0,PIV) );
-  /*     ^^^ zero disables interrupt, don't enable here or ram_init will
-	 be wrong. It's enabled below. */
-
-  /* Periodic Interrupt Timer Register */
-  /*    see section 3.8.3 of the SIM Reference Manual */
-  *PITR = (unsigned short int)( SAM(0x09,0,PITM) );
-  /*    1.098mS interrupt */
-
-  /* Port C Data */
-  /*    load values before enabled */
-  *PORTC = (unsigned char) 0x0;
-
-  /* Chip-Select Base Address Register */
-  /*    see section 7 of the SIM Reference Manual */
-  *CSBARBT = (unsigned short int)
-    (((0x000000 >> 8)&0xfff8) | BS_512K ); /* 512k bytes located at 0x0000 */
-  *CSBAR0 = (unsigned short int)
-    (((0x000000 >> 8)&0xfff8) | BS_1M );   /* 1M bytes located at 0x0000 */
-  *CSBAR1 = (unsigned short int)
-    (((0x080000 >> 8)&0xfff8) | BS_256K ); /* 256k bytes located at 0x80000 */
-  *CSBAR2 = (unsigned short int)
-    (((0x080000 >> 8)&0xfff8) | BS_256K ); /* 256k bytes located at 0x80000 */
-  *CSBAR3 = (unsigned short int)         
-    (((0x0C0000 >> 8)&0xfff8) | BS_256K ); /* 256k bytes located at 0xC0000 */
-  *CSBAR4 = (unsigned short int)
-    (((0x0C0000 >> 8)&0xfff8) | BS_256K ); /* 256 bytes located at 0xC0000 */
-  *CSBAR5 = (unsigned short int)         
-    (0xfff8 | BS_64K);	       	         /* AVEC interrupts */
-#ifdef EFI332_v040b
-  *CSBAR6 = (unsigned short int)
-    (((0x000000 >> 8)&0xfff8) | BS_512K ); /* 512k bytes located at 0x0000 */
-  *CSBAR8 = (unsigned short int) /* PCMCIA IOCS */
-    (((0x0c0000 >> 8)&0xfff8) | BS_64K ); /* 64k bytes located at 0xc0000 */
-  *CSBAR9 = (unsigned short int) /* PCMCIA MEMCS */
-    (((0x0D0000 >> 8)&0xfff8) | BS_64K ); /* 64k bytes located at 0xd0000 */
-#else /* EFI332_v040b */
-  *CSBAR10 = (unsigned short int)
-    (((0x000000 >> 8)&0xfff8) | BS_512K ); /* 512k bytes located at 0x0000 */
-#endif /* EFI332_v040b */
-
-  /* Chip-Select Options Registers */
-  /*    see section 7 of the SIM Reference Manual */
-#ifdef FLASHWRITE
-  *CSORBT = (unsigned short int)
-    ( BothBytes | ReadWrite | SyncAS | WaitStates_2 | UserSupSpace );
-#else /* FLASHWRITE */
-  *CSORBT = (unsigned short int)
-    ( BothBytes | ReadOnly | SyncAS | WaitStates_2 | UserSupSpace );
-#endif /* FLASHWRITE */
-  *CSOR0 = (unsigned short int)
-    ( BothBytes | ReadOnly | SyncAS | External | UserSupSpace );
-  *CSOR1 = (unsigned short int)
-    ( LowerByte | ReadWrite | SyncAS | FastTerm | UserSupSpace );
-  *CSOR2 = (unsigned short int)
-    ( UpperByte | ReadWrite | SyncAS | FastTerm | UserSupSpace );
-  *CSOR3 = (unsigned short int)
-    ( LowerByte | ReadWrite | SyncAS | FastTerm | UserSupSpace );
-  *CSOR4 = (unsigned short int)
-    ( UpperByte | ReadWrite | SyncAS | FastTerm | UserSupSpace );
-  *CSOR5 = (unsigned short int)
-    ( BothBytes | ReadWrite | SyncAS | CPUSpace | IPLevel_any | AVEC );
-#ifdef EFI332_v040b
-  *CSOR6 = (unsigned short int)
-    ( BothBytes | ReadOnly | SyncAS | External | UserSupSpace );
-  *CSOR8 = (unsigned short int)
-    ( BothBytes | ReadWrite | SyncAS | External | UserSupSpace );
-  *CSOR9 = (unsigned short int)
-    ( BothBytes | ReadWrite | SyncAS | External | UserSupSpace );
-#else /* EFI332_v040b */
-  *CSOR10 = (unsigned short int)
-    ( BothBytes | ReadOnly | SyncAS | External | UserSupSpace );
-#endif /* EFI332_v040b */
-
-  /* Chip Select Pin Assignment Register 0 */
-  /*    see section 7 of the SIM Reference Manual */
-  *CSPAR0 = (unsigned short int)( 
-     SAM(DisOut,CS_5,0x3000) |	/* AVEC (internally) */
-     SAM(CS16bit,CS_4,0x0c00) |	/* RAM UDS, bank2 */
-     SAM(CS16bit,CS_3,0x0300) |	/* RAM LDS, bank2 */
-     SAM(CS16bit,CS_2,0x00c0)|	/* RAM UDS, bank1 */
-     SAM(CS16bit,CS_1,0x0030)|	/* RAM LDS, bank1 */
-     SAM(CS16bit,CS_0,0x000c)|	/* W/!R */
-     SAM(CS16bit,CSBOOT,0x0003)	/* ROM CS */
-     );
-
-  /* Chip Select Pin Assignment Register 1 */
-  /*    see section 7 of the SIM Reference Manual */
-#ifdef EFI332_v040b
-  *CSPAR1 = (unsigned short int)( 
-     SAM(DisOut,CS_10,0x300)|	/* ECLK */
-     SAM(CS16bit,CS_9,0x0c0) |	/* PCMCIA MEMCS */
-     SAM(CS16bit,CS_8,0x030) |	/* PCMCIA IOCS */
-     SAM(DisOut,CS_7,0x00c) |	/* PC4 */
-     SAM(CS16bit,CS_6,0x003)	/* ROM !OE */
-     );
-#else /* EFI332_v040b */
-  *CSPAR1 = (unsigned short int)( 
-     SAM(CS16bit,CS_10,0x300)|	/* ROM !OE */
-     SAM(DisOut,CS_9,0x0c0) |	/* PC6 */
-     SAM(DisOut,CS_8,0x030) |	/* PC5 */
-     SAM(DisOut,CS_7,0x00c) |	/* PC4 */
-     SAM(DisOut,CS_6,0x003)	/* PC3 */
-     );
-#endif /* EFI332_v040b */
-
-  /* Port E and F Data Register */
-  /*    see section 9 of the SIM Reference Manual */
-  *PORTE0 = (unsigned char) 0;
-  *PORTF0 = (unsigned char) 0;
-
-  /* Port E and F Data Direction Register */
-  /*    see section 9 of the SIM Reference Manual */
-  *DDRE = (unsigned char) 0xff;
-  *DDRF = (unsigned char) 0xfd;
-  
-  /* Port E and F Pin Assignment Register */
-  /*    see section 9 of the SIM Reference Manual */
-  *PEPAR = (unsigned char) 0;
-  *PFPAR = (unsigned char) 0;
-
-  /* end of SIM initalization code */
-  /* end include in ram_init.S */
-
-
-
-  /*
-   * Initialize RAM by copying the .data section out of ROM (if
-   * needed) and "zero-ing" the .bss section.
-   */
-  {
-    register char *src = _endtext;
-    register char *dst = _sdata;
-
-    if (_copy_data_from_rom)
-      /* ROM has data at end of text; copy it. */
-      while (dst < _edata)
-	*dst++ = *src++;
-    
-    /* Zero bss */
-    for (dst = __bss_start; dst< _end; dst++)
-      *dst = 0;
-  }
-
-  /*
-   * Initalize the board.
-   */
-  Spurious_Initialize();
-  console_init();
-
-  /*
-   * Execute main with arguments argc and agrv.
-   */
-  boot_card(1,__argv);
-  reboot();
-
-}
-