diff options
author | Joel Sherrill <joel.sherrill@OARcorp.com> | 1995-05-11 17:39:37 +0000 |
---|---|---|
committer | Joel Sherrill <joel.sherrill@OARcorp.com> | 1995-05-11 17:39:37 +0000 |
commit | ac7d5ef06a6d6e8d84abbd1f0b82162725f98326 (patch) | |
tree | 9304cf759a73f2a1c6fd3191948f00e870af3787 /c/src/lib/libbsp/i960/cvme961/timer/timer.c | |
download | rtems-ac7d5ef06a6d6e8d84abbd1f0b82162725f98326.tar.bz2 |
Initial revision
Diffstat (limited to 'c/src/lib/libbsp/i960/cvme961/timer/timer.c')
-rw-r--r-- | c/src/lib/libbsp/i960/cvme961/timer/timer.c | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/i960/cvme961/timer/timer.c b/c/src/lib/libbsp/i960/cvme961/timer/timer.c new file mode 100644 index 0000000000..0a91d12a93 --- /dev/null +++ b/c/src/lib/libbsp/i960/cvme961/timer/timer.c @@ -0,0 +1,107 @@ +/* Timer_init() + * + * This routine initializes the Z8536 timer on the SQSIO4 SQUALL + * board for the CVME961 board. The timer is setup to provide a + * tick every 1 millisecond. + * + * Input parameters: NONE + * + * Output parameters: NONE + * + * NOTE: This routine will not work if the optimizer is enabled + * for most compilers. The multiple writes to the Z8536 + * will be optimized away. + * + * It is important that the timer start/stop overhead be + * determined when porting or modifying this code. + * + * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. + * On-Line Applications Research Corporation (OAR). + * All rights assigned to U.S. Government, 1994. + * + * This material may be reproduced by or for the U.S. Government pursuant + * to the copyright license under the clause at DFARS 252.227-7013. This + * notice must appear in all copies of this file and its derivatives. + * + * $Id$ + */ + + +#include <rtems.h> +#include <bsp.h> +#include "z8536.h" + +#define TIMER 0xc00000a0 + +int Ttimer_val; +rtems_boolean Timer_driver_Find_average_overhead; + +void flush_reg(); +rtems_isr timerisr(); + +void Timer_initialize() +{ + set_vector( timerisr, 4, 0 ); /* install ISR */ + + i960_mask_intr( 5 ); /* disable VIC068 tick */ + flush_reg(); /* timed code starts clean */ + Ttimer_val = 0; /* clear timer ISR count */ + Z8x36_WRITE( TIMER, MASTER_INTR, 0x01 ); /* reset */ + Z8x36_WRITE( TIMER, MASTER_INTR, 0x00 ); /* clear reset */ + Z8x36_WRITE( TIMER, MASTER_CFG, 0x00 ); /* disable everything */ + Z8x36_WRITE( TIMER, CNT_TMR_VECTOR, 0x72 ); /* clear intr vector */ + Z8x36_WRITE( TIMER, MASTER_CFG, 0x20 ); /* clear intr info */ + Z8x36_WRITE( TIMER, MASTER_CFG, 0xe0 ); /* disable interrupts */ + Z8x36_WRITE( TIMER, MASTER_CFG, 0x20 ); /* clear intr info */ + Z8x36_WRITE( TIMER, MASTER_CFG, 0xe0 ); /* disable interrupts */ + Z8x36_WRITE( TIMER, MASTER_INTR, 0xe2 ); /* disable lower chain, */ + /* no vector, set right */ + /* justified addr and */ + /* master int enable */ + Z8x36_WRITE( TIMER, CT1_MODE_SPEC, 0x80 ); /* T1 continuous, and */ + /* cycle/pulse output */ + Z8x36_WRITE( TIMER, CT1_TIME_CONST_MSB, 0x00 ); + Z8x36_WRITE( TIMER, CT1_TIME_CONST_LSB, 0x00 ); + Z8x36_WRITE( TIMER, CT1_CMD_STATUS, 0xc0 ); /* set INTR enable (IE) */ + Z8x36_WRITE( TIMER, MASTER_CFG, 0x40 ); /* enable timer1 */ + Z8x36_WRITE( TIMER, CT1_CMD_STATUS, 0x06 ); /* set trigger command */ + /* (TCB) and gate */ + /* command (GCB) bits */ +} + +#define AVG_OVERHEAD 11 /* It typically takes 5.5 microseconds */ + /* (11 countdowns) to start/stop the timer. */ +#define LEAST_VALID 15 /* Don't trust a value lower than this */ + +int Read_timer() +{ + rtems_unsigned8 msb, lsb; + rtems_unsigned32 remaining, total; + + Z8x36_WRITE( TIMER, CT1_CMD_STATUS, 0xce ); /* read the counter value */ + Z8x36_READ( TIMER, CT1_CUR_CNT_MSB, msb ); + Z8x36_READ( TIMER, CT1_CUR_CNT_LSB, lsb ); + + remaining = 0xffff - ((msb << 8) + lsb); + total = (Ttimer_val * 0x10000) + remaining; + + if ( Timer_driver_Find_average_overhead == 1 ) + return total; /* in one-half microsecond units */ + else { + if ( total < LEAST_VALID ) + return 0; /* below timer resolution */ + return (total-AVG_OVERHEAD) >> 1; + } +} + +rtems_status_code Empty_function( void ) +{ + return RTEMS_SUCCESSFUL; +} + +void Set_find_average_overhead( + rtems_boolean find_flag +) +{ + Timer_driver_Find_average_overhead = find_flag; +} |