Revert "Add bspopts.h.in."

This reverts commit daffa606cc4a45d93c1f0f4fe365fde0fda6acbb.

Conflicts:

	c/src/lib/libbsp/arm/lpc24xx/include/bspopts.h.in
	c/src/lib/libbsp/powerpc/mpc55xxevb/include/bspopts.h.in
	c/src/lib/libbsp/powerpc/qoriq/include/bspopts.h.in

Manually deleted conflicting files.

1 files changed, 0 insertions, 78 deletions

diff --git a/c/src/lib/libbsp/i386/pc386/include/bspopts.h.in b/c/src/lib/libbsp/i386/pc386/include/bspopts.h.in
deleted file mode 100644
index 207387efc2..0000000000
--- a/c/src/lib/libbsp/i386/pc386/include/bspopts.h.in
+++ /dev/null
@@ -1,78 +0,0 @@
-/* include/bspopts.h.in.  Generated from configure.ac by autoheader.  */
-
-/* If defined, then the BSP Framework will put a non-zero pattern into the
-   RTEMS Workspace and C program heap. This should assist in finding code that
-   assumes memory starts set to zero. */
-#undef BSP_DIRTY_MEMORY
-
-/* Always defined when on a pc386 to enable the pc386 support for determining
-   the CPU core number in an SMP configuration. */
-#undef BSP_HAS_SMP
-
-/* If defined, print a message and wait until pressed before resetting board
-   when application exits. */
-#undef BSP_PRESS_KEY_FOR_RESET
-
-/* If defined, reset the board when the application exits. */
-#undef BSP_RESET_BOARD_AT_EXIT
-
-/* If defined, set the VGA display to 80x50. */
-#undef BSP_VIDEO_80x50
-
-/* If enabled, the clock driver will use the good old 8254 chip to report
-   microsecond-accuracy clock times. Enable it, if: - you have nanosecond
-   timing enabled (you do NOT have USE_TICKS_FOR_CPU_USAGE_STATISTICS enabled)
-   - you do NOT have CLOCK_DRIVER_USE_TSC enabled (use one, the other, or
-   neither) - you do not mind adding roughly 5 microseconds to each context
-   switch. */
-#undef CLOCK_DRIVER_USE_8254
-
-/* If enabled, the clock driver will use the TSC register available with
-   Pentium-class CPUs to report close to nanosecond-accuracy clock times.
-   Enable it, if: - you have nanosecond timing enabled (you do NOT have
-   USE_TICKS_FOR_CPU_USAGE_STATISTICS enabled) - you do NOT have
-   CLOCK_DRIVER_USE_8254 enabled (use one, the other, or neither) - you have a
-   Pentium which supports TSC (all Intels, and probably all or most clones) -
-   you do not have a variable-speed CPU clock. Note that some motherboard BIOS
-   will automatically vary clock speed for thermal control. Note also,
-   however, that really new Pentium-class chips from Intel and AMD will
-   maintain a constant-rate TSC regardless. */
-#undef CLOCK_DRIVER_USE_TSC
-
-/* Determines, whether RTEMS will try to use the primary IDE interface.
-   Disable it, if: - you have no primary IDE interface - or you have no disk
-   attached to this interface - or you do not want to access disks attached to
-   this interface */
-#undef IDE_USE_PRIMARY_INTERFACE
-
-/* Determines, whether RTEMS will try to use the secondary IDE interface.
-   Enable it, if: - you have a secondary IDE interface - and you have at least
-   one disk attached to this interface - and you do want to access disks
-   attached to this interface */
-#undef IDE_USE_SECONDARY_INTERFACE
-
-/* if using 16 bit mode assembler support */
-#undef NEW_GAS
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Determines, whether the console will be associated with the standard VGA
-   display or with the COM1 serial port. Currently only the VGA display and
-   COM1 support printk. */
-#undef USE_COM1_AS_CONSOLE