bsps: Move clock drivers to bsps

This patch is a part of the BSP source reorganization.

Update #3285.

2 files changed, 1 insertions, 114 deletions

diff --git a/c/src/lib/libbsp/arm/csb337/Makefile.am b/c/src/lib/libbsp/arm/csb337/Makefile.am
index fcf4774221..23a87975bb 100644
--- a/c/src/lib/libbsp/arm/csb337/Makefile.am
+++ b/c/src/lib/libbsp/arm/csb337/Makefile.am
@@ -37,7 +37,7 @@ librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/getentropy/getentropy
 librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/cpucounter/cpucounterread.c
 librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/cpucounter/cpucounterdiff.c
 librtemsbsp_a_SOURCES += startup/pmc.c
-librtemsbsp_a_SOURCES += clock/clock.c
+librtemsbsp_a_SOURCES +=../../../../../../bsps/arm/csb337/clock/clock.c
 librtemsbsp_a_SOURCES += timer/timer.c
 # console
 librtemsbsp_a_SOURCES += ../../../../../../bsps/shared/dev/serial/legacy-console.c
diff --git a/c/src/lib/libbsp/arm/csb337/clock/clock.c b/c/src/lib/libbsp/arm/csb337/clock/clock.c
deleted file mode 100644
index f231a04697..0000000000
--- a/c/src/lib/libbsp/arm/csb337/clock/clock.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- *  AT91RM9200 clock specific using the System Timer
- */
-
-/*
- *  Copyright (c) 2003 by Cogent Computer Systems
- *  Written by Mike Kelly <mike@cogcomp.com>
- *         and Jay Monkman <jtm@lopingdog.com>
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <rtems.h>
-#include <rtems/clockdrv.h>
-#include <rtems/libio.h>
-
-#include <stdlib.h>
-#include <bsp.h>
-#include <bsp/irq.h>
-#include <at91rm9200.h>
-#include <at91rm9200_pmc.h>
-
-/**
- * Enables clock interrupt.
- *
- * If the interrupt is always on, this can be a NOP.
- */
-static void clock_isr_on(const rtems_irq_connect_data *unused)
-{
-  /* enable timer interrupt */
-  ST_REG(ST_IER) = ST_SR_PITS;
-}
-
-/**
- * Disables clock interrupts
- *
- * If the interrupt is always on, this can be a NOP.
- */
-static void clock_isr_off(const rtems_irq_connect_data *unused)
-{
-  /* disable timer interrupt */
-  ST_REG(ST_IDR) = ST_SR_PITS;
-}
-
-/**
- * Tests to see if clock interrupt is enabled, and returns 1 if so.
- * If interrupt is not enabled, returns 0.
- *
- * If the interrupt is always on, this always returns 1.
- */
-static int clock_isr_is_on(const rtems_irq_connect_data *irq)
-{
-  /* check timer interrupt */
-  return ST_REG(ST_IMR) & ST_SR_PITS;
-}
-
-void Clock_isr(rtems_irq_hdl_param arg);
-
-/* Replace the first value with the clock's interrupt name. */
-rtems_irq_connect_data clock_isr_data = {
-  .name   = AT91RM9200_INT_SYSIRQ,
-  .hdl    = Clock_isr,
-  .handle = NULL,
-  .on     = clock_isr_on,
-  .off    = clock_isr_off,
-  .isOn   = clock_isr_is_on,
-};
-
-
-#define Clock_driver_support_install_isr( _new ) \
-  BSP_install_rtems_irq_handler(&clock_isr_data)
-
-static void Clock_driver_support_initialize_hardware(void)
-{
-  uint32_t st_str;
-  int slck;
-  unsigned long value;
-
-  /* the system timer is driven from SLCK */
-  slck = at91rm9200_get_slck();
-  value = (((rtems_configuration_get_microseconds_per_tick() * slck) +
-                      (1000000/2))/ 1000000);
-
-  /* read the status to clear the int */
-  st_str = ST_REG(ST_SR);
-  (void) st_str; /* avoid set but not used warning */ \
-
-  /* set priority */
-  AIC_SMR_REG(AIC_SMR_SYSIRQ) = AIC_SMR_PRIOR(0x7);
-
-  /* set the timer value */
-  ST_REG(ST_PIMR) = value;
-}
-
-#define Clock_driver_support_at_tick() \
-  do { \
-    uint32_t st_str; \
-    \
-    /* read the status to clear the int */ \
-    st_str = ST_REG(ST_SR); \
-    (void) st_str; /* avoid set but not used warning */ \
-  } while (0)
-
-#define Clock_driver_support_shutdown_hardware() \
-  do { \
-    BSP_remove_rtems_irq_handler(&clock_isr_data); \
-  } while (0)
-
-#define CLOCK_DRIVER_USE_DUMMY_TIMECOUNTER
-
-#include "../../../../libbsp/shared/clockdrv_shell.h"