arm/xilinx-zynq: Split console driver files

This avoids to pull in via printk() the Termios support which pulls in
the file system support.  This fixes a spconfig02 test failure.

2 files changed, 182 insertions, 151 deletions

diff --git a/bsps/arm/shared/serial/zynq-uart-polled.c b/bsps/arm/shared/serial/zynq-uart-polled.c
new file mode 100644
index 0000000000..4e0ca46aca
--- /dev/null
+++ b/bsps/arm/shared/serial/zynq-uart-polled.c
@@ -0,0 +1,182 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (C) 2013, 2017 embedded brains GmbH
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <bsp/zynq-uart.h>
+#include <bsp/zynq-uart-regs.h>
+
+#include <bspopts.h>
+
+/*
+ * Make weak and let the user override.
+ */
+uint32_t zynq_uart_input_clock(void) __attribute__ ((weak));
+
+uint32_t zynq_uart_input_clock(void)
+{
+  return ZYNQ_CLOCK_UART;
+}
+
+static int zynq_cal_baud_rate(uint32_t  baudrate,
+                              uint32_t* brgr,
+                              uint32_t* bauddiv,
+                              uint32_t  modereg)
+{
+  uint32_t brgr_value;    /* Calculated value for baud rate generator */
+  uint32_t calcbaudrate;  /* Calculated baud rate */
+  uint32_t bauderror;     /* Diff between calculated and requested baud rate */
+  uint32_t best_error = 0xFFFFFFFF;
+  uint32_t percenterror;
+  uint32_t bdiv;
+  uint32_t inputclk = zynq_uart_input_clock();
+
+  /*
+   * Make sure the baud rate is not impossilby large.
+   * Fastest possible baud rate is Input Clock / 2.
+   */
+  if ((baudrate * 2) > inputclk) {
+    return -1;
+  }
+  /*
+   * Check whether the input clock is divided by 8
+   */
+  if(modereg & ZYNQ_UART_MODE_CLKS) {
+    inputclk = inputclk / 8;
+  }
+
+  /*
+   * Determine the Baud divider. It can be 4to 254.
+   * Loop through all possible combinations
+   */
+  for (bdiv = 4; bdiv < 255; bdiv++) {
+
+    /*
+     * Calculate the value for BRGR register
+     */
+    brgr_value = inputclk / (baudrate * (bdiv + 1));
+
+    /*
+     * Calculate the baud rate from the BRGR value
+     */
+    calcbaudrate = inputclk/ (brgr_value * (bdiv + 1));
+
+    /*
+     * Avoid unsigned integer underflow
+     */
+    if (baudrate > calcbaudrate) {
+      bauderror = baudrate - calcbaudrate;
+    }
+    else {
+      bauderror = calcbaudrate - baudrate;
+    }
+
+    /*
+     * Find the calculated baud rate closest to requested baud rate.
+     */
+    if (best_error > bauderror) {
+      *brgr = brgr_value;
+      *bauddiv = bdiv;
+      best_error = bauderror;
+    }
+  }
+
+  /*
+   * Make sure the best error is not too large.
+   */
+  percenterror = (best_error * 100) / baudrate;
+#define XUARTPS_MAX_BAUD_ERROR_RATE		 3	/* max % error allowed */
+  if (XUARTPS_MAX_BAUD_ERROR_RATE < percenterror) {
+    return -1;
+  }
+
+  return 0;
+}
+
+void zynq_uart_initialize(rtems_termios_device_context *base)
+{
+  zynq_uart_context *ctx = (zynq_uart_context *) base;
+  volatile zynq_uart *regs = ctx->regs;
+  uint32_t brgr = 0x3e;
+  uint32_t bauddiv = 0x6;
+
+  zynq_cal_baud_rate(ZYNQ_UART_DEFAULT_BAUD, &brgr, &bauddiv, regs->mode);
+
+  regs->control &= ~(ZYNQ_UART_CONTROL_RXEN | ZYNQ_UART_CONTROL_TXEN);
+  regs->control = ZYNQ_UART_CONTROL_RXDIS
+    | ZYNQ_UART_CONTROL_TXDIS
+    | ZYNQ_UART_CONTROL_RXRES
+    | ZYNQ_UART_CONTROL_TXRES;
+  regs->mode = ZYNQ_UART_MODE_CHMODE(ZYNQ_UART_MODE_CHMODE_NORMAL)
+    | ZYNQ_UART_MODE_PAR(ZYNQ_UART_MODE_PAR_NONE)
+    | ZYNQ_UART_MODE_CHRL(ZYNQ_UART_MODE_CHRL_8);
+  regs->baud_rate_gen = ZYNQ_UART_BAUD_RATE_GEN_CD(brgr);
+  regs->baud_rate_div = ZYNQ_UART_BAUD_RATE_DIV_BDIV(bauddiv);
+  regs->rx_fifo_trg_lvl = ZYNQ_UART_RX_FIFO_TRG_LVL_RTRIG(0);
+  regs->rx_timeout = ZYNQ_UART_RX_TIMEOUT_RTO(0);
+  regs->control = ZYNQ_UART_CONTROL_RXEN
+    | ZYNQ_UART_CONTROL_TXEN
+    | ZYNQ_UART_CONTROL_RSTTO;
+}
+
+int zynq_uart_read_polled(rtems_termios_device_context *base)
+{
+  zynq_uart_context *ctx = (zynq_uart_context *) base;
+  volatile zynq_uart *regs = ctx->regs;
+
+  if ((regs->channel_sts & ZYNQ_UART_CHANNEL_STS_REMPTY) != 0) {
+    return -1;
+  } else {
+    return ZYNQ_UART_TX_RX_FIFO_FIFO_GET(regs->tx_rx_fifo);
+  }
+}
+
+void zynq_uart_write_polled(
+  rtems_termios_device_context *base,
+  char c
+)
+{
+  zynq_uart_context *ctx = (zynq_uart_context *) base;
+  volatile zynq_uart *regs = ctx->regs;
+
+  while ((regs->channel_sts & ZYNQ_UART_CHANNEL_STS_TFUL) != 0) {
+    /* Wait */
+  }
+
+  regs->tx_rx_fifo = ZYNQ_UART_TX_RX_FIFO_FIFO(c);
+}
+
+void zynq_uart_reset_tx_flush(zynq_uart_context *ctx)
+{
+  volatile zynq_uart *regs = ctx->regs;
+  int                 c = 4;
+
+  while (c-- > 0)
+    zynq_uart_write_polled(&ctx->base, '\r');
+
+  while ((regs->channel_sts & ZYNQ_UART_CHANNEL_STS_TEMPTY) == 0) {
+    /* Wait */
+  }
+}
diff --git a/bsps/arm/shared/serial/zynq-uart.c b/bsps/arm/shared/serial/zynq-uart.c
index 92a8c86009..fc670441b8 100644
--- a/bsps/arm/shared/serial/zynq-uart.c
+++ b/bsps/arm/shared/serial/zynq-uart.c
@@ -31,117 +31,6 @@
 
 #include <bspopts.h>
 
-/*
- * Make weak and let the user override.
- */
-uint32_t zynq_uart_input_clock(void) __attribute__ ((weak));
-
-uint32_t zynq_uart_input_clock(void)
-{
-  return ZYNQ_CLOCK_UART;
-}
-
-static int zynq_cal_baud_rate(uint32_t  baudrate,
-                              uint32_t* brgr,
-                              uint32_t* bauddiv,
-                              uint32_t  modereg)
-{
-  uint32_t brgr_value;    /* Calculated value for baud rate generator */
-  uint32_t calcbaudrate;  /* Calculated baud rate */
-  uint32_t bauderror;     /* Diff between calculated and requested baud rate */
-  uint32_t best_error = 0xFFFFFFFF;
-  uint32_t percenterror;
-  uint32_t bdiv;
-  uint32_t inputclk = zynq_uart_input_clock();
-
-  /*
-   * Make sure the baud rate is not impossilby large.
-   * Fastest possible baud rate is Input Clock / 2.
-   */
-  if ((baudrate * 2) > inputclk) {
-    return -1;
-  }
-  /*
-   * Check whether the input clock is divided by 8
-   */
-  if(modereg & ZYNQ_UART_MODE_CLKS) {
-    inputclk = inputclk / 8;
-  }
-
-  /*
-   * Determine the Baud divider. It can be 4to 254.
-   * Loop through all possible combinations
-   */
-  for (bdiv = 4; bdiv < 255; bdiv++) {
-
-    /*
-     * Calculate the value for BRGR register
-     */
-    brgr_value = inputclk / (baudrate * (bdiv + 1));
-
-    /*
-     * Calculate the baud rate from the BRGR value
-     */
-    calcbaudrate = inputclk/ (brgr_value * (bdiv + 1));
-
-    /*
-     * Avoid unsigned integer underflow
-     */
-    if (baudrate > calcbaudrate) {
-      bauderror = baudrate - calcbaudrate;
-    }
-    else {
-      bauderror = calcbaudrate - baudrate;
-    }
-
-    /*
-     * Find the calculated baud rate closest to requested baud rate.
-     */
-    if (best_error > bauderror) {
-      *brgr = brgr_value;
-      *bauddiv = bdiv;
-      best_error = bauderror;
-    }
-  }
-
-  /*
-   * Make sure the best error is not too large.
-   */
-  percenterror = (best_error * 100) / baudrate;
-#define XUARTPS_MAX_BAUD_ERROR_RATE		 3	/* max % error allowed */
-  if (XUARTPS_MAX_BAUD_ERROR_RATE < percenterror) {
-    return -1;
-  }
-
-  return 0;
-}
-
-void zynq_uart_initialize(rtems_termios_device_context *base)
-{
-  zynq_uart_context *ctx = (zynq_uart_context *) base;
-  volatile zynq_uart *regs = ctx->regs;
-  uint32_t brgr = 0x3e;
-  uint32_t bauddiv = 0x6;
-
-  zynq_cal_baud_rate(ZYNQ_UART_DEFAULT_BAUD, &brgr, &bauddiv, regs->mode);
-
-  regs->control &= ~(ZYNQ_UART_CONTROL_RXEN | ZYNQ_UART_CONTROL_TXEN);
-  regs->control = ZYNQ_UART_CONTROL_RXDIS
-    | ZYNQ_UART_CONTROL_TXDIS
-    | ZYNQ_UART_CONTROL_RXRES
-    | ZYNQ_UART_CONTROL_TXRES;
-  regs->mode = ZYNQ_UART_MODE_CHMODE(ZYNQ_UART_MODE_CHMODE_NORMAL)
-    | ZYNQ_UART_MODE_PAR(ZYNQ_UART_MODE_PAR_NONE)
-    | ZYNQ_UART_MODE_CHRL(ZYNQ_UART_MODE_CHRL_8);
-  regs->baud_rate_gen = ZYNQ_UART_BAUD_RATE_GEN_CD(brgr);
-  regs->baud_rate_div = ZYNQ_UART_BAUD_RATE_DIV_BDIV(bauddiv);
-  regs->rx_fifo_trg_lvl = ZYNQ_UART_RX_FIFO_TRG_LVL_RTRIG(0);
-  regs->rx_timeout = ZYNQ_UART_RX_TIMEOUT_RTO(0);
-  regs->control = ZYNQ_UART_CONTROL_RXEN
-    | ZYNQ_UART_CONTROL_TXEN
-    | ZYNQ_UART_CONTROL_RSTTO;
-}
-
 #ifdef ZYNQ_CONSOLE_USE_INTERRUPTS
 static void zynq_uart_interrupt(void *arg)
 {
@@ -220,33 +109,6 @@ static void zynq_uart_last_close(
 }
 #endif
 
-int zynq_uart_read_polled(rtems_termios_device_context *base)
-{
-  zynq_uart_context *ctx = (zynq_uart_context *) base;
-  volatile zynq_uart *regs = ctx->regs;
-
-  if ((regs->channel_sts & ZYNQ_UART_CHANNEL_STS_REMPTY) != 0) {
-    return -1;
-  } else {
-    return ZYNQ_UART_TX_RX_FIFO_FIFO_GET(regs->tx_rx_fifo);
-  }
-}
-
-void zynq_uart_write_polled(
-  rtems_termios_device_context *base,
-  char c
-)
-{
-  zynq_uart_context *ctx = (zynq_uart_context *) base;
-  volatile zynq_uart *regs = ctx->regs;
-
-  while ((regs->channel_sts & ZYNQ_UART_CHANNEL_STS_TFUL) != 0) {
-    /* Wait */
-  }
-
-  regs->tx_rx_fifo = ZYNQ_UART_TX_RX_FIFO_FIFO(c);
-}
-
 static void zynq_uart_write_support(
   rtems_termios_device_context *base,
   const char *buf,
@@ -313,16 +175,3 @@ const rtems_termios_device_handler zynq_uart_handler = {
   .mode = TERMIOS_POLLED
 #endif
 };
-
-void zynq_uart_reset_tx_flush(zynq_uart_context *ctx)
-{
-  volatile zynq_uart *regs = ctx->regs;
-  int                 c = 4;
-
-  while (c-- > 0)
-    zynq_uart_write_polled(&ctx->base, '\r');
-
-  while ((regs->channel_sts & ZYNQ_UART_CHANNEL_STS_TEMPTY) == 0) {
-    /* Wait */
-  }
-}