summaryrefslogtreecommitdiffstats
path: root/README.configure
diff options
context:
space:
mode:
authorJoel Sherrill <joel.sherrill@OARcorp.com>1999-02-25 19:34:33 +0000
committerJoel Sherrill <joel.sherrill@OARcorp.com>1999-02-25 19:34:33 +0000
commit85d8eb20d2f796bc4f608d420b670c92d4ea7fcd (patch)
treeb80aac7816cc880b03be5e6beb6717db75698967 /README.configure
parente1b7770144350ccc858edd2927b9f031097500d7 (diff)
downloadrtems-85d8eb20d2f796bc4f608d420b670c92d4ea7fcd.tar.bz2
Corrected the comments on --enable-gcc28 and switched the sense of the
--enable-tests switch.
Diffstat (limited to 'README.configure')
-rw-r--r--README.configure20
1 files changed, 10 insertions, 10 deletions
diff --git a/README.configure b/README.configure
index 40dd22847f..945f36dbe2 100644
--- a/README.configure
+++ b/README.configure
@@ -21,7 +21,6 @@ RTEMS-specific option are supported:
--disable-rtems-inlines
--disable-posix
- --disable-tests
--disable-networking
--enable-cxx
--enable-bare-cpu-model=<MODEL>
@@ -30,6 +29,7 @@ RTEMS-specific option are supported:
--enable-gmake-print-directory
--enable-libcdir=<DIRECTORY> (do not use if gcc 2.8 is enabled)
--enable-rtemsbsp="bsp1 bsp2 ..."
+ --enable-tests
In addition, the following standard autoconf options are frequently
used when configuring RTEMS installations:
@@ -48,17 +48,17 @@ By default, the RTEMS support of C++ is disabled. It can be enabled
with the --enable-cxx option. If the rtems++ C++ library is installed
it will also be build.
-By default, the RTEMS test suites are configured. The --disable-tests
-will not configure the RTEMS test suite. This is used only to speed-up
-configuration in case building the tests are not necessary.
+By default, the RTEMS test suites are NOT configured. The --enable-tests
+will not configure the RTEMS test suite. The default speeds up the build
+and configure process when the tests are not desired.
By default, RTEMS is built using arguments and build rules which are
-compatible with gcc 2.7.2.2. This requires that the user specify
-the location of the Standard C Library with the --enable-libcdir
-option. If using a gcc which supports the -specs option, then
-the --enable-gcc28 option may be used to enable this feature.
-You should use the --enable-gcc28 option when using either the
-egcs source tree, testgcc snapshots, or gcc 2.8.0 or newer.
+NOT compatible with gcc 2.7.2.2. If using a gcc which supports the
+-specs option, then the --enable-gcc28 option may be used to enable
+this feature. You should use the --enable-gcc28 option when using
+either the egcs source tree, testgcc snapshots, or gcc 2.8.0 or newer.
+If you --disable-gcc28, then you MUST specify the location of the
+Standard C Library with the --enable-libcdir option.
By default, all bsps for a target are built. The bare BSP is not built
unless directlty specified. There are two ways of changing this: