summaryrefslogtreecommitdiffstats
path: root/README.configure
diff options
context:
space:
mode:
authorJoel Sherrill <joel.sherrill@OARcorp.com>2002-01-20 17:03:51 +0000
committerJoel Sherrill <joel.sherrill@OARcorp.com>2002-01-20 17:03:51 +0000
commit003d4da3fcd6f0530f643997e3c42c30d1ebd450 (patch)
tree4264e46b44c07291cd7ec87b61f85a59fbc57f05 /README.configure
parent645a43d39f8166a54d7fcc9e0a824edc856d8c1e (diff)
downloadrtems-003d4da3fcd6f0530f643997e3c42c30d1ebd450.tar.bz2
2002-01-19 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.ac: Add --enable-docs support. Add RTEMS_HOST_CONFIG_SUBDIRS(doc). Remove doc/Makefile. * Makefile.am: Add HOST_SUBDIRS to SUBDIRS. Remove doc from hard-coded SUBDIRS. * README.configure: Added a bit of information on this new option.
Diffstat (limited to 'README.configure')
-rw-r--r--README.configure13
1 files changed, 8 insertions, 5 deletions
diff --git a/README.configure b/README.configure
index 9fe7e0d0c6..9a24abfc5e 100644
--- a/README.configure
+++ b/README.configure
@@ -32,6 +32,7 @@ RTEMS-specific option are supported:
--enable-rtemsbsp="bsp1 bsp2 ..."
--enable-tests
--enable-rdbg (only valid for i386 and some PowerPC BSPs)
+ --enable-docs
In addition, the following standard autoconf options are frequently
used when configuring RTEMS installations:
@@ -87,10 +88,10 @@ unless directly specified. There are two ways of changing this:
bsps as the default bsps, or
+ set the RTEMS_BSP variable during make (see below).
-The --enable-rtemsbsp= option configures RTEMS for a specific target
-architecture. Remember that the target specifies the CPU family while
-the BSP specifies the precise board you will be using. The following
-targets are supported:
+The --enable-rtemsbsp= option configures RTEMS for a specific board
+within a target architecture. Remember that the target specifies the
+CPU family while the BSP specifies the precise board you will be using.
+The following targets are supported:
(none) will build the host-based version on Linux,
Solaris and HPUX.
@@ -109,7 +110,7 @@ targets are supported:
sh-rtems
sparc-rtems
bare see notes
-
+
The cross-compiler is set to $(target)-gcc by default. This can be
overridden by:
@@ -135,6 +136,8 @@ As an example, to build and install the mvme136 and dmv152 bsps for m68k do:
The sample tests are built by 'make all', do a 'make test' to build the full
test suite.
+By default, --enable-docs is disabled and documentation is not built.
+
2.2 Build with Cygnus one-tree release
To build and install RTEMS with the one-tree structure, just copy the rtems