2003-12-14 Ralf Corsepius <corsepiu@faw.uni-ulm.de>

	* automake/compile.am: Remove (Unused).

2 files changed, 4 insertions, 213 deletions

diff --git a/ChangeLog b/ChangeLog
index 05b50c4676..1854632d17 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,7 @@
+2003-12-14	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
+
+	* automake/compile.am: Remove (Unused).
+
 2003-12-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
 
 	* automake/lib.am: Remove (Unused).
diff --git a/automake/compile.am b/automake/compile.am
deleted file mode 100644
index 8262162aec..0000000000
--- a/automake/compile.am
+++ /dev/null
@@ -1,213 +0,0 @@
-##
-## $Id$
-##
-
-## -------------------------------------------------------------------------
-## NOTE: This file is rather immature and has to be considered to be 
-## almost experimental.
-##
-## Expect frequent changes -- It deserves to be cleaned up :(
-## -------------------------------------------------------------------------
-
-## The section below is based on make/compilers/gcc-target-default.cfg
-## used in former versions of RTEMS.
-
-## 
-## Set up the flags for the toolchains:
-##
-## We are considering 3 different building schemes here:
-## * Using gcc's being able to accept -specs (aka gcc-2.8 building scheme)
-## * Using gcc's not being able to accept -specs (aka gcc-2.7.2 building
-##   scheme)
-## * Using third party toolchains (aka non-gcc building scheme)
-##
-## Automake conditionals in use:
-## RTEMS_USE_GCC     .. if we are using GCC
-
-## NOTES: 
-## * The gcc-2.8 building scheme is the nominal building scheme and
-##   is actively supported.
-## * The non-gcc building scheme requires manually setting up environment 
-##   variables and is hardly tested at all
-
-## CFLAGS_OPTIMIZE_V, CFLAGS_DEBUG_V are the values we
-## would want the corresponding macros to be set to.
-##
-## CFLAGS_OPTIMIZE, CFLAGS_DEBUG are set by the 
-## 'VARIANT=<OPTIMIZE|DEBUG>' targets to their _V values.
-
-## XCPPFLAGS, XCFLAGS, XCXXFLAGS, XASFLAGS 
-## are used to add flags from the shell
-## cf. make.info ("Implicit rules/variables" for details)
-
-if RTEMS_USE_GCC
-## All the stuff below is specific to gcc
-
-## gcc >= 2.8.x
-GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
-else
-## fall back to the old style compilers/*.cfg
-## CONFIG.CC is supposed to be provided by <BSP>.cfg
-include $(CONFIG.CC)
-endif # RTEMS_USE_GCC
-
-DEFS = @DEFS@
-
-CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) $(DEFINES) $(XCPPFLAGS)
-CFLAGS   = @RTEMS_CFLAGS@ $(XCFLAGS)
-## FIXME: This should be correct, but is not supported, yet
-# CXXFLAGS = @RTEMS_CXXFLAGS@ $(XCXXFLAGS)
-## Fall back to using RTEMS_CFLAGS for C++
-CXXFLAGS = @RTEMS_CFLAGS@ $(XCXXFLAGS)
-ASFLAGS  = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
-
-LINK_LIBS = $(LD_LIBS)
-
-#
-# Client compiler and support tools
-#
-
-#
-# How to compile stuff into ${ARCH} subdirectory
-#
-
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-        $(AM_LDFLAGS) $(LDFLAGS) -o $@
-
-CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-CXXLD = $(CXX)
-CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-
-CCAS = $(CC)
-CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
-
-# OBSOLETE: Don't use
-AS = $(CC)
-ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
-
-# Dependency files for use by gmake
-# NOTE: we don't put them into $(ARCH)
-#       so that 'make clean' doesn't blow it away
-
-DEPEND=Depends-${ARCH}
-
-# We deliberately don't have anything depend on the
-# $(DEPEND) file; otherwise it will get rebuilt even
-# on 'make clean'
-#
-
-if RTEMS_USE_GCC
-## HACK: Specific to gcc
-## FIXME: The approach below is known to be conceptionally broken.
-depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
-##       Use gcc -M to generate dependencies
-##       Replace foo.o with $(ARCH)/foo.o
-##       Replace $(ARCH) value with string $(ARCH)
-##           so that it will for debug cases
-	$(COMPILE) -M   $^    |  \
-	sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
-	    -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
-	mv $(DEPEND).tmp $(DEPEND)
-
-# pull in dependencies if they exist  
-ifeq (${DEPEND},$(wildcard ${DEPEND}))
-include ${DEPEND}
-@ENDIF@
-endif
-depend: depend-am
-
-# spell out all the LINK_FILE's, rather than using -lbsp, so
-#  that $(LINK_FILES) can be a dependency
-
-LINK_OBJS = \
-    $(OBJS) \
-    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
-
-LINK_FILES =\
-    $(START_FILE) \
-    $(OBJS) \
-    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
-
-if RTEMS_USE_GCC
-## gcc >= 2.8
-define make-rel
-	$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
-endef
-else
-## non-gcc
-define make-rel
-	$(LINK) $(XLDFLAGS) $^
-endef
-endif
-
-## -------------------------------------------------------------------------
-
-## translate VARIANT into VARIANT_V
-VARIANT = OPTIMIZE
-
-VARIANT_OPTIMIZE_V = OPTIMIZE
-VARIANT_DEBUG_V = DEBUG
-VARIANT_optimize_V = OPTIMIZE
-VARIANT_debug_V = DEBUG
-
-VARIANT_V = $(VARIANT_$(VARIANT)_V)
-
-## Setup the variant build subdirectory
-ARCH_OPTIMIZE_V = o-optimize
-ARCH_DEBUG_V = o-debug
-
-ARCH__V = $(ARCH_OPTIMIZE_V)
-ARCH = $(ARCH_$(VARIANT_V)_V)
-
-## Setup the library suffix
-LIBSUFFIX_OPTIMIZE_V =
-LIBSUFFIX_DEBUG_V = _g
-LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
-
-LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
-
-## These are supposed to be set in make/custom/<bsp>.cfg
-CPU_CFLAGS = @CPU_CFLAGS@
-CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
-CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
-CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
-
-## ------------------------------------------------------------------------
-## Setup hard-coded flags
-if RTEMS_USE_GCC
-## gcc >= gcc-2.8
-RTEMS_CFLAGS_OPTIMIZE_V =
-RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
-
-## non-gcc
-## We can't guess what flags might be required here.
-## Pass the values from the environment if you want to apply them.
-endif
-RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
-
-## -------------------------------------------------------------------------
-
-CC = @CC@ $(GCCSPECS)
-CXX = @CXX@ $(GCCSPECS)
-CPP = @CPP@ $(GCCSPECS)
-
-LD = @LD@
-OBJCOPY = @OBJCOPY@
-NM = @NM@
-SIZE = @SIZE@
-STRIP = @STRIP@
-
-##
-AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
-AM_CFLAGS =
-AM_CXXFLAGS =
-AM_CCASFLAGS = $(CPU_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_CCASFLAGS)
-
-clean-local:
-	$(RM) -r o-optimize o-debug $(CLEANDIRS)
-	$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp