Patch from Ralf Corsepius <corsepiu@faw.uni-ulm.de>:

    FYI: I am not talking about using "make -C <dir>", which probably
    is much faster on M$ hosts than RTEMS's implementation, but about
    removing --enable-gmake-print support and to apply a variant of
    automake's subdirectory.

    Automake's subdirectory rule seems to be a little bit faster, but I
    wouldn't bet on this.

    Attached to this mail is my proposal.

    After applying the patch, please run
        cvs rm aclocal/enable-gmake-print.m4
        ./autogen

12 files changed, 170 insertions, 286 deletions

diff --git a/README.configure b/README.configure
index 712fa4d826..03619bda7a 100644
--- a/README.configure
+++ b/README.configure
@@ -26,7 +26,6 @@ RTEMS-specific option are supported:
         --enable-bare-cpu-model=<MODEL>
         --enable-bare-cpu-cflags=<FLAGS>
         --enable-gcc28               (also use enable-libcdir when disabled)
-        --enable-gmake-print-directory
         --enable-libcdir=<DIRECTORY>      (do not use if gcc 2.8 is enabled)
 	--enable-rtemsbsp="bsp1 bsp2 ..."
 	--enable-tests
diff --git a/aclocal.m4 b/aclocal.m4
index 79fbbddcf0..d666fd0db5 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -52,23 +52,6 @@ AC_SUBST(RTEMS_ROOT)
 ])dnl
 
 dnl $Id$
-dnl
-dnl Note: This option is considered obsolete
-
-AC_DEFUN(RTEMS_ENABLE_GMAKE_PRINT,
-[
-AC_ARG_ENABLE(gmake-print-directory,
-[  --enable-gmake-print-directory       enable GNU Make's print directory],
-[case "${enableval}" in 
-  yes) RTEMS_USE_OWN_PDIR=no ;;
-  no) RTEMS_USE_OWN_PDIR=yes ;;
-  *)  AC_MSG_ERROR(bad value ${enableval} for gmake-print-directory option)
-;;
-esac],[RTEMS_USE_OWN_PDIR=yes])
-AC_SUBST(RTEMS_USE_OWN_PDIR)dnl
-])
-
-dnl $Id$
 
 AC_DEFUN(RTEMS_ENABLE_MULTIPROCESSING,
 [
diff --git a/aclocal/enable-gmake-print.m4 b/aclocal/enable-gmake-print.m4
deleted file mode 100644
index 3c2973db29..0000000000
--- a/aclocal/enable-gmake-print.m4
+++ /dev/null
@@ -1,16 +0,0 @@
-dnl $Id$
-dnl
-dnl Note: This option is considered obsolete
-
-AC_DEFUN(RTEMS_ENABLE_GMAKE_PRINT,
-[
-AC_ARG_ENABLE(gmake-print-directory,
-[  --enable-gmake-print-directory       enable GNU Make's print directory],
-[case "${enableval}" in 
-  yes) RTEMS_USE_OWN_PDIR=no ;;
-  no) RTEMS_USE_OWN_PDIR=yes ;;
-  *)  AC_MSG_ERROR(bad value ${enableval} for gmake-print-directory option)
-;;
-esac],[RTEMS_USE_OWN_PDIR=yes])
-AC_SUBST(RTEMS_USE_OWN_PDIR)dnl
-])
diff --git a/c/src/make/directory.cfg b/c/src/make/directory.cfg
index 68b68d79e0..1714204318 100644
--- a/c/src/make/directory.cfg
+++ b/c/src/make/directory.cfg
@@ -8,50 +8,17 @@
 #   See also make/main.cfg
 #
 
-# include $(RTEMS_ROOT)/make/main.cfg
+# RULE=$(shell echo $@ | $(SED) -e s/debug_// -e s/profile_//)
 
-# on a 'make -k' we don't want to bomb out of directory list
-EXIT_CMD=exit 1
-ifeq (k, $(findstring k, $(MAKEFLAGS)))
-EXIT_CMD=true
-endif
-
-RULE=$(shell echo $@ | $(SED) -e s/debug_// -e s/profile_//)
-
-ifeq ($(RTEMS_USE_OWN_PDIR),yes)
+# This is a simplified variant of automake-1.4's rule for handling 
+# subdirectories
 $(RECURSE_TARGETS):
-	@$(ECHO); \
-        BASEDIR=`pwd`; \
-        test -d $$BASEDIR || $(EXIT_CMD) ; \
-        for subd in $(SUB_DIRS) xxx; \
-	do if [ $$subd != xxx ] ; then  \
-	    cd $$BASEDIR; \
-	    if [ ! -d $$subd ] ; then \
-	      $(ECHO) "*** ERROR -- Directory ($$subd) does not exist!!!"; \
-	      $(EXIT_CMD) ; \
-	    fi ; \
-	    $(ECHO); \
-            $(ECHO) "***  $$BASEDIR/$$subd ($@)" ; \
-	    cmd="cd $$subd; $(MAKE) $(RULE)"; \
-	    $(ECHO) $$cmd; \
-	    eval $$cmd || $(EXIT_CMD); \
-  fi; done; \
-        $(ECHO); \
-        $(ECHO) "***  $$BASEDIR/$@ ($@) Finished."; \
-        $(ECHO)
-	$($@_WRAPUP)
-else
-ifdef RECURSE_TARGETS
-$(RECURSE_TARGETS):
-	@$(ECHO) ; set -e ; \
-	if [ "$(SUB_DIRS)" != "" ] ; then \
-	  sdirs="$(SUB_DIRS)" ; \
-	else \
-	  sdirs="xxx" ; \
-	fi ; \
-	if [ "$$sdirs" != "xxx" ] ; then \
-	  for subd in $$sdirs; do $(MAKE) -w -C $$subd $(RULE); done ;\
-	fi
-endif
-endif
-
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed -e s/-recursive// -e s/debug_// -e s/profile_// `; \
+	list='$(SUB_DIRS)'; for subdir in $$list; do \
+	  echo "Making $$target RTEMS_BSP=${RTEMS_BSP} in $$subdir"; \
+	  local_target="$$target"; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
diff --git a/c/update-tools/cipolish b/c/update-tools/cipolish
index 61af53312c..e7a72c92ab 100644
--- a/c/update-tools/cipolish
+++ b/c/update-tools/cipolish
@@ -81,8 +81,12 @@ while( <> )
   {
     #remove the line
   }
-  elsif ( /^[ 	]*AC_SUBST\(RTEMS_USE_OWN_PDIR\)[ 	]*$/o ) 
-  {
+  elsif ( /^[\s\t]*AC_SUBST\(RTEMS_USE_OWN_PDIR\)[ 	]*$/o ) 
+  { # obsolete option
+    #remove the line
+  }
+  elsif ( /^[\s\t]*RTEMS_ENABLE_GMAKE_PRINT[     ]*$/o ) 
+  { # obsolete macro
     #remove the line
   }
   elsif ( /^[ 	]*AC_SUBST\(RTEMS_HAS_NETWORKING\)[ 	]*$/o ) 
diff --git a/configure b/configure
index 2b37777450..2f7ff98f4a 100644
--- a/configure
+++ b/configure
@@ -16,8 +16,6 @@ ac_help="$ac_help
 ac_help="$ac_help
   --with-cross-host=HOST      host (cygnus)"
 ac_help="$ac_help
-  --enable-gmake-print-directory       enable GNU Make's print directory"
-ac_help="$ac_help
   --enable-multiprocessing             enable multiprocessing interface"
 ac_help="$ac_help
   --enable-posix                       enable posix interface"
@@ -576,7 +574,7 @@ test "$TARGET_SUBDIR" = "." || PROJECT_ROOT="$PROJECT_ROOT/.."
 
 
 echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6
-echo "configure:580: checking for RTEMS Version" >&5
+echo "configure:578: checking for RTEMS Version" >&5
 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then
 RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \
 sed -e 's%RTEMS[ 	]*Version[ 	]*\(.*\)[ 	]*%\1%g'`
@@ -593,7 +591,7 @@ RTEMS_ROOT='$(top_srcdir)'/$RTEMS_TOPdir;
 
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:597: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:595: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -666,7 +664,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:670: checking host system type" >&5
+echo "configure:668: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -687,7 +685,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:691: checking target system type" >&5
+echo "configure:689: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -705,7 +703,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:709: checking build system type" >&5
+echo "configure:707: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -737,21 +735,6 @@ fi
 
 
 
-# Check whether --enable-gmake-print-directory or --disable-gmake-print-directory was given.
-if test "${enable_gmake_print_directory+set}" = set; then
-  enableval="$enable_gmake_print_directory"
-  case "${enableval}" in 
-  yes) RTEMS_USE_OWN_PDIR=no ;;
-  no) RTEMS_USE_OWN_PDIR=yes ;;
-  *)  { echo "configure: error: bad value ${enableval} for gmake-print-directory option" 1>&2; exit 1; }
-;;
-esac
-else
-  RTEMS_USE_OWN_PDIR=yes
-fi
-
-
-
 # Check whether --enable-multiprocessing or --disable-multiprocessing was given.
 if test "${enable_multiprocessing+set}" = set; then
   enableval="$enable_multiprocessing"
@@ -912,7 +895,7 @@ RTEMS_PREFIX=${target_cpu}-${target_vendor}
 # Extract the first word of "cat", so it can be a program name with args.
 set dummy cat; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:916: checking for $ac_word" >&5
+echo "configure:899: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CAT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -947,7 +930,7 @@ fi
 # Extract the first word of "rm", so it can be a program name with args.
 set dummy rm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:951: checking for $ac_word" >&5
+echo "configure:934: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_RM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -982,7 +965,7 @@ fi
 # Extract the first word of "cp", so it can be a program name with args.
 set dummy cp; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:986: checking for $ac_word" >&5
+echo "configure:969: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1017,7 +1000,7 @@ fi
 # Extract the first word of "mv", so it can be a program name with args.
 set dummy mv; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1021: checking for $ac_word" >&5
+echo "configure:1004: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MV'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1052,7 +1035,7 @@ fi
 # Extract the first word of "ln", so it can be a program name with args.
 set dummy ln; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1056: checking for $ac_word" >&5
+echo "configure:1039: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LN'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1085,7 +1068,7 @@ else
 fi
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1089: checking whether ln -s works" >&5
+echo "configure:1072: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1108,7 +1091,7 @@ fi
 # Extract the first word of "chmod", so it can be a program name with args.
 set dummy chmod; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1112: checking for $ac_word" >&5
+echo "configure:1095: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CHMOD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1143,7 +1126,7 @@ fi
 # Extract the first word of "sort", so it can be a program name with args.
 set dummy sort; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1147: checking for $ac_word" >&5
+echo "configure:1130: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_SORT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1187,7 +1170,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1191: checking for a BSD compatible install" >&5
+echo "configure:1174: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1243,7 +1226,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 # Extract the first word of "perl", so it can be a program name with args.
 set dummy perl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1247: checking for $ac_word" >&5
+echo "configure:1230: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1285,7 +1268,7 @@ fi
 # Extract the first word of "mkdir", so it can be a program name with args.
 set dummy mkdir; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1289: checking for $ac_word" >&5
+echo "configure:1272: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MKDIR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1321,7 +1304,7 @@ fi
 
 
 echo $ac_n "checking for working $MKDIR -m 0755""... $ac_c" 1>&6
-echo "configure:1325: checking for working $MKDIR -m 0755" >&5
+echo "configure:1308: checking for working $MKDIR -m 0755" >&5
 if eval "test \"`echo '$''{'rtems_cv_prog_MKDIR_P'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1338,7 +1321,7 @@ echo "$ac_t""$rtems_cv_prog_MKDIR_M" 1>&6
 
 
 echo $ac_n "checking for working $MKDIR -p""... $ac_c" 1>&6
-echo "configure:1342: checking for working $MKDIR -p" >&5
+echo "configure:1325: checking for working $MKDIR -p" >&5
 if eval "test \"`echo '$''{'rtems_cv_prog_mkdir_p'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1358,7 +1341,7 @@ test "$rtems_cv_prog_MKDIR_P" = "yes" && MKDIR="$MKDIR -p"
 # Extract the first word of "touch", so it can be a program name with args.
 set dummy touch; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1362: checking for $ac_word" >&5
+echo "configure:1345: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_TOUCH'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1393,7 +1376,7 @@ fi
 # Extract the first word of "cmp", so it can be a program name with args.
 set dummy cmp; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1397: checking for $ac_word" >&5
+echo "configure:1380: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1429,7 +1412,7 @@ fi
 # Extract the first word of "sed", so it can be a program name with args.
 set dummy sed; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1433: checking for $ac_word" >&5
+echo "configure:1416: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_SED'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1466,7 +1449,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1470: checking for $ac_word" >&5
+echo "configure:1453: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_M4'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1508,7 +1491,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1512: checking for $ac_word" >&5
+echo "configure:1495: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_KSH'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1556,7 +1539,7 @@ fi
 
 
 echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6
-echo "configure:1560: checking rtems target cpu" >&5
+echo "configure:1543: checking rtems target cpu" >&5
 case "${target}" in
   # hpux unix port should go here
   i[3456]86-go32-rtems*)
@@ -1587,7 +1570,7 @@ echo "$ac_t""$target_cpu" 1>&6
 
 # Is this a supported CPU?
 echo $ac_n "checking if cpu $target_cpu is supported""... $ac_c" 1>&6
-echo "configure:1591: checking if cpu $target_cpu is supported" >&5
+echo "configure:1574: checking if cpu $target_cpu is supported" >&5
 if test -d "$srcdir/$RTEMS_TOPdir/c/src/exec/score/cpu/$target_cpu"; then
   echo "$ac_t""yes" 1>&6
 else
@@ -1649,7 +1632,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1653: checking for $ac_word" >&5
+echo "configure:1636: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1693,7 +1676,7 @@ rtems_save_CFLAGS=$CFLAGS
 CC=$CC_FOR_TARGET
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1697: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1680: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1704,12 +1687,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1708 "configure"
+#line 1691 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1713: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1735,12 +1718,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1739: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1722: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1744: checking whether we are using GNU C" >&5
+echo "configure:1727: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1749,7 +1732,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1753: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1736: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1764,7 +1747,7 @@ if test $ac_cv_prog_gcc = yes; then
   ac_save_CFLAGS="$CFLAGS"
   CFLAGS=
   echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1768: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1751: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1806,7 +1789,7 @@ unset ac_cv_prog_cc_cross
 
 
 echo $ac_n "checking whether $CC_FOR_TARGET accepts -specs""... $ac_c" 1>&6
-echo "configure:1810: checking whether $CC_FOR_TARGET accepts -specs" >&5
+echo "configure:1793: checking whether $CC_FOR_TARGET accepts -specs" >&5
 if eval "test \"`echo '$''{'rtems_cv_gcc_specs'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1827,7 +1810,7 @@ echo "$ac_t""$rtems_cv_gcc_specs" 1>&6
  
 
 echo $ac_n "checking whether $CC_FOR_TARGET accepts --pipe""... $ac_c" 1>&6
-echo "configure:1831: checking whether $CC_FOR_TARGET accepts --pipe" >&5
+echo "configure:1814: checking whether $CC_FOR_TARGET accepts --pipe" >&5
 if eval "test \"`echo '$''{'rtems_cv_gcc_pipe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1868,7 +1851,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1872: checking for $ac_word" >&5
+echo "configure:1855: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1912,7 +1895,7 @@ rtems_save_CXXFLAGS=$CXXFLAGS
 CXX=$CXX_FOR_TARGET
 
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1916: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:1899: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
 
 ac_ext=C
 # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1923,12 +1906,12 @@ cross_compiling=$ac_cv_prog_cxx_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1927 "configure"
+#line 1910 "configure"
 #include "confdefs.h"
 
 int main(){return(0);}
 EOF
-if { (eval echo configure:1932: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cxx_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1954,12 +1937,12 @@ if test $ac_cv_prog_cxx_works = no; then
   { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1958: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1941: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
 cross_compiling=$ac_cv_prog_cxx_cross
 
 echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1963: checking whether we are using GNU C++" >&5
+echo "configure:1946: checking whether we are using GNU C++" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1968,7 +1951,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1972: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gxx=yes
 else
   ac_cv_prog_gxx=no
@@ -1983,7 +1966,7 @@ if test $ac_cv_prog_gxx = yes; then
   ac_save_CXXFLAGS="$CXXFLAGS"
   CXXFLAGS=
   echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1987: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1970: checking whether ${CXX-g++} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2037,7 +2020,7 @@ fi
 
   
 echo $ac_n "checking target's ar""... $ac_c" 1>&6
-echo "configure:2041: checking target's ar" >&5
+echo "configure:2024: checking target's ar" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2070,7 +2053,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable AR_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:2074: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5
+echo "configure:2057: checking whether environment variable AR_FOR_TARGET is an absolute path" >&5
     case "$AR_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -2087,7 +2070,7 @@ echo "configure:2074: checking whether environment variable AR_FOR_TARGET is an
   # Extract the first word of ""$program_prefix"ar", so it can be a program name with args.
 set dummy "$program_prefix"ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2091: checking for $ac_word" >&5
+echo "configure:2074: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2124,7 +2107,7 @@ fi
 
   
 echo $ac_n "checking target's as""... $ac_c" 1>&6
-echo "configure:2128: checking target's as" >&5
+echo "configure:2111: checking target's as" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2157,7 +2140,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable AS_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:2161: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5
+echo "configure:2144: checking whether environment variable AS_FOR_TARGET is an absolute path" >&5
     case "$AS_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -2174,7 +2157,7 @@ echo "configure:2161: checking whether environment variable AS_FOR_TARGET is an
   # Extract the first word of ""$program_prefix"as", so it can be a program name with args.
 set dummy "$program_prefix"as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2178: checking for $ac_word" >&5
+echo "configure:2161: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2211,7 +2194,7 @@ fi
 
   
 echo $ac_n "checking target's ld""... $ac_c" 1>&6
-echo "configure:2215: checking target's ld" >&5
+echo "configure:2198: checking target's ld" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2244,7 +2227,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable LD_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:2248: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5
+echo "configure:2231: checking whether environment variable LD_FOR_TARGET is an absolute path" >&5
     case "$LD_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -2261,7 +2244,7 @@ echo "configure:2248: checking whether environment variable LD_FOR_TARGET is an
   # Extract the first word of ""$program_prefix"ld", so it can be a program name with args.
 set dummy "$program_prefix"ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2265: checking for $ac_word" >&5
+echo "configure:2248: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2298,7 +2281,7 @@ fi
 
   
 echo $ac_n "checking target's nm""... $ac_c" 1>&6
-echo "configure:2302: checking target's nm" >&5
+echo "configure:2285: checking target's nm" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2331,7 +2314,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable NM_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:2335: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5
+echo "configure:2318: checking whether environment variable NM_FOR_TARGET is an absolute path" >&5
     case "$NM_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -2348,7 +2331,7 @@ echo "configure:2335: checking whether environment variable NM_FOR_TARGET is an
   # Extract the first word of ""$program_prefix"nm", so it can be a program name with args.
 set dummy "$program_prefix"nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2352: checking for $ac_word" >&5
+echo "configure:2335: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2386,7 +2369,7 @@ fi
 
   
 echo $ac_n "checking target's ranlib""... $ac_c" 1>&6
-echo "configure:2390: checking target's ranlib" >&5
+echo "configure:2373: checking target's ranlib" >&5
 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2419,7 +2402,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable RANLIB_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:2423: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5
+echo "configure:2406: checking whether environment variable RANLIB_FOR_TARGET is an absolute path" >&5
     case "$RANLIB_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -2436,7 +2419,7 @@ echo "configure:2423: checking whether environment variable RANLIB_FOR_TARGET is
   # Extract the first word of ""$program_prefix"ranlib", so it can be a program name with args.
 set dummy "$program_prefix"ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2440: checking for $ac_word" >&5
+echo "configure:2423: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2475,7 +2458,7 @@ fi
     # ranlib wasn't found; check if ar -s is available
     
 echo $ac_n "checking whether $AR_FOR_TARGET -s works""... $ac_c" 1>&6
-echo "configure:2479: checking whether $AR_FOR_TARGET -s works" >&5
+echo "configure:2462: checking whether $AR_FOR_TARGET -s works" >&5
 if eval "test \"`echo '$''{'rtems_cv_AR_FOR_TARGET_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2484,8 +2467,8 @@ cat > conftest.$ac_ext <<EOF
 int foo( int b ) 
 { return b; }
 EOF
-if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:2488: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
-  && { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:2489: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
+if { ac_try='$CC_FOR_TARGET -o conftest.o -c conftest.$ac_ext'; { (eval echo configure:2471: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
+  && { ac_try='$AR_FOR_TARGET -sr conftest.a conftest.o'; { (eval echo configure:2472: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } \
   && test -s conftest.a ; \
 then
   rtems_cv_AR_FOR_TARGET_S="yes"
@@ -2510,7 +2493,7 @@ echo "$ac_t""$rtems_cv_AR_FOR_TARGET_S" 1>&6
 
   
 echo $ac_n "checking target's objcopy""... $ac_c" 1>&6
-echo "configure:2514: checking target's objcopy" >&5
+echo "configure:2497: checking target's objcopy" >&5
 if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2543,7 +2526,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:2547: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5
+echo "configure:2530: checking whether environment variable OBJCOPY_FOR_TARGET is an absolute path" >&5
     case "$OBJCOPY_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -2560,7 +2543,7 @@ echo "configure:2547: checking whether environment variable OBJCOPY_FOR_TARGET i
   # Extract the first word of ""$program_prefix"objcopy", so it can be a program name with args.
 set dummy "$program_prefix"objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2564: checking for $ac_word" >&5
+echo "configure:2547: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_OBJCOPY_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2597,7 +2580,7 @@ fi
 
   
 echo $ac_n "checking target's size""... $ac_c" 1>&6
-echo "configure:2601: checking target's size" >&5
+echo "configure:2584: checking target's size" >&5
 if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2630,7 +2613,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable SIZE_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:2634: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5
+echo "configure:2617: checking whether environment variable SIZE_FOR_TARGET is an absolute path" >&5
     case "$SIZE_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -2647,7 +2630,7 @@ echo "configure:2634: checking whether environment variable SIZE_FOR_TARGET is a
   # Extract the first word of ""$program_prefix"size", so it can be a program name with args.
 set dummy "$program_prefix"size; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2651: checking for $ac_word" >&5
+echo "configure:2634: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_SIZE_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2684,7 +2667,7 @@ fi
 
   
 echo $ac_n "checking target's strip""... $ac_c" 1>&6
-echo "configure:2688: checking target's strip" >&5
+echo "configure:2671: checking target's strip" >&5
 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2717,7 +2700,7 @@ else
     # will override the environment variable, which isn't what the user
     # intends
     echo $ac_n "checking whether environment variable STRIP_FOR_TARGET is an absolute path""... $ac_c" 1>&6
-echo "configure:2721: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5
+echo "configure:2704: checking whether environment variable STRIP_FOR_TARGET is an absolute path" >&5
     case "$STRIP_FOR_TARGET" in
     /*) # valid
       echo "$ac_t"""yes"" 1>&6
@@ -2734,7 +2717,7 @@ echo "configure:2721: checking whether environment variable STRIP_FOR_TARGET is
   # Extract the first word of ""$program_prefix"strip", so it can be a program name with args.
 set dummy "$program_prefix"strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2738: checking for $ac_word" >&5
+echo "configure:2721: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2773,7 +2756,7 @@ fi
 
  if test "${target_cpu}" = "i386"; then
     echo $ac_n "checking for 16 bit mode assembler support""... $ac_c" 1>&6
-echo "configure:2777: checking for 16 bit mode assembler support" >&5
+echo "configure:2760: checking for 16 bit mode assembler support" >&5
 if eval "test \"`echo '$''{'rtems_cv_prog_gas_code16'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2783,7 +2766,7 @@ else
          addr32
          lgdt 0
 EOF
-      if { ac_try='$AS_FOR_TARGET -o conftest.o conftest.s'; { (eval echo configure:2787: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+      if { ac_try='$AS_FOR_TARGET -o conftest.o conftest.s'; { (eval echo configure:2770: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
         rtems_cv_prog_gas_code16=yes
       else
         rtems_cv_prog_gas_code16=no
@@ -2799,7 +2782,7 @@ echo "$ac_t""$rtems_cv_prog_gas_code16" 1>&6
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2803: checking for $ac_word" >&5
+echo "configure:2786: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2829,7 +2812,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2833: checking for $ac_word" >&5
+echo "configure:2816: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2880,7 +2863,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2884: checking for $ac_word" >&5
+echo "configure:2867: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2912,7 +2895,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2916: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2899: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2923,12 +2906,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2927 "configure"
+#line 2910 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2932: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2954,12 +2937,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2958: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2941: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2963: checking whether we are using GNU C" >&5
+echo "configure:2946: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2968,7 +2951,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2972: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2987,7 +2970,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2991: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2974: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3019,12 +3002,12 @@ else
 fi
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:3023: checking for Cygwin environment" >&5
+echo "configure:3006: checking for Cygwin environment" >&5
 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3028 "configure"
+#line 3011 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -3035,7 +3018,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:3039: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3022: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -3052,19 +3035,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:3056: checking for mingw32 environment" >&5
+echo "configure:3039: checking for mingw32 environment" >&5
 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3061 "configure"
+#line 3044 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:3068: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3051: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -3083,7 +3066,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=yes
 
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:3087: checking for executable suffix" >&5
+echo "configure:3070: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3093,7 +3076,7 @@ else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:3097: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:3080: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
       *.c | *.o | *.obj) ;;
@@ -3132,7 +3115,7 @@ if test "$target_cpu" = "unix" ; then
    
 
 echo $ac_n "checking whether $RTEMS_HOST supports System V semaphores""... $ac_c" 1>&6
-echo "configure:3136: checking whether $RTEMS_HOST supports System V semaphores" >&5
+echo "configure:3119: checking whether $RTEMS_HOST supports System V semaphores" >&5
 if eval "test \"`echo '$''{'rtems_cv_sysv_sem'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3141,7 +3124,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 3145 "configure"
+#line 3128 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3167,7 +3150,7 @@ int main () {
 }
 
 EOF
-if { (eval echo configure:3171: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   rtems_cv_sysv_sem="yes"
 else
@@ -3190,7 +3173,7 @@ echo "$ac_t""$rtems_cv_sysv_sem" 1>&6
    
 
 echo $ac_n "checking whether $RTEMS_HOST supports System V shared memory""... $ac_c" 1>&6
-echo "configure:3194: checking whether $RTEMS_HOST supports System V shared memory" >&5
+echo "configure:3177: checking whether $RTEMS_HOST supports System V shared memory" >&5
 if eval "test \"`echo '$''{'rtems_cv_sysv_shm'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3199,7 +3182,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 3203 "configure"
+#line 3186 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3215,7 +3198,7 @@ int main () {
 }
 
 EOF
-if { (eval echo configure:3219: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   rtems_cv_sysv_shm="yes"
 else
@@ -3238,7 +3221,7 @@ echo "$ac_t""$rtems_cv_sysv_shm" 1>&6
    
 
 echo $ac_n "checking whether $RTEMS_HOST supports System V messages""... $ac_c" 1>&6
-echo "configure:3242: checking whether $RTEMS_HOST supports System V messages" >&5
+echo "configure:3225: checking whether $RTEMS_HOST supports System V messages" >&5
 if eval "test \"`echo '$''{'rtems_cv_sysv_msg'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3247,7 +3230,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 3251 "configure"
+#line 3234 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3263,7 +3246,7 @@ int main () {
 }
 
 EOF
-if { (eval echo configure:3267: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   rtems_cv_sysv_msg="yes"
 else
@@ -3295,7 +3278,7 @@ fi
 # find all the Executive Makefiles
 
 echo $ac_n "checking for Makefile.in in c/src/exec/rtems""... $ac_c" 1>&6
-echo "configure:3299: checking for Makefile.in in c/src/exec/rtems" >&5
+echo "configure:3282: checking for Makefile.in in c/src/exec/rtems" >&5
 if test -d $srcdir/c/src/exec/rtems; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3310,7 +3293,7 @@ fi
 
 
 echo $ac_n "checking for Makefile.in in c/src/exec/sapi""... $ac_c" 1>&6
-echo "configure:3314: checking for Makefile.in in c/src/exec/sapi" >&5
+echo "configure:3297: checking for Makefile.in in c/src/exec/sapi" >&5
 if test -d $srcdir/c/src/exec/sapi; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3325,7 +3308,7 @@ fi
 
 
 echo $ac_n "checking for Makefile.in in c/src/exec/score/cpu/$target_cpu""... $ac_c" 1>&6
-echo "configure:3329: checking for Makefile.in in c/src/exec/score/cpu/$target_cpu" >&5
+echo "configure:3312: checking for Makefile.in in c/src/exec/score/cpu/$target_cpu" >&5
 if test -d $srcdir/c/src/exec/score/cpu/$target_cpu; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3342,7 +3325,7 @@ fi
 if test "$RTEMS_HAS_POSIX_API" = "yes"; then
   
 echo $ac_n "checking for Makefile.in in c/src/exec/posix""... $ac_c" 1>&6
-echo "configure:3346: checking for Makefile.in in c/src/exec/posix" >&5
+echo "configure:3329: checking for Makefile.in in c/src/exec/posix" >&5
 if test -d $srcdir/c/src/exec/posix; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3364,7 +3347,7 @@ if test -d "$srcdir/c/src/lib/libbsp/$target_cpu"; then
 
   if test -z "$rtems_bsp"; then
     echo $ac_n "checking for bsps""... $ac_c" 1>&6
-echo "configure:3368: checking for bsps" >&5
+echo "configure:3351: checking for bsps" >&5
     files=`ls $srcdir/c/src/lib/libbsp/$target_cpu`
     for file in $files; do
       case $file in
@@ -3429,7 +3412,7 @@ echo "configure:3368: checking for bsps" >&5
         bspdirs="$bspdirs $bspdir"
         
 echo $ac_n "checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir""... $ac_c" 1>&6
-echo "configure:3433: checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir" >&5
+echo "configure:3416: checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir" >&5
 if test -d $srcdir/c/src/lib/libbsp/$bspcpudir$bspdir; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3444,7 +3427,7 @@ fi
 
         
 echo $ac_n "checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared""... $ac_c" 1>&6
-echo "configure:3448: checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared" >&5
+echo "configure:3431: checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared" >&5
 if test -d $srcdir/c/src/lib/libbsp/${bspcpudir}shared; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3474,7 +3457,7 @@ fi
 # find all the CPU dependent library Makefiles
 
 echo $ac_n "checking for Makefile.in in c/src/lib/libcpu/$target_cpu""... $ac_c" 1>&6
-echo "configure:3478: checking for Makefile.in in c/src/lib/libcpu/$target_cpu" >&5
+echo "configure:3461: checking for Makefile.in in c/src/lib/libcpu/$target_cpu" >&5
 if test -d $srcdir/c/src/lib/libcpu/$target_cpu; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3491,7 +3474,7 @@ fi
 if test "$skip_startfiles" != "yes"; then
   
 echo $ac_n "checking for Makefile.in in c/src/lib/start/$target_cpu""... $ac_c" 1>&6
-echo "configure:3495: checking for Makefile.in in c/src/lib/start/$target_cpu" >&5
+echo "configure:3478: checking for Makefile.in in c/src/lib/start/$target_cpu" >&5
 if test -d $srcdir/c/src/lib/start/$target_cpu; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3520,12 +3503,12 @@ fi
 
 # If the TCP/IP stack is enabled, then find all TCP/IP Makefiles
 echo $ac_n "checking if networking is enabled? ""... $ac_c" 1>&6
-echo "configure:3524: checking if networking is enabled? " >&5
+echo "configure:3507: checking if networking is enabled? " >&5
 echo "$ac_t""$RTEMS_HAS_NETWORKING" 1>&6
 if test "$RTEMS_HAS_NETWORKING" = "yes"; then
   
 echo $ac_n "checking for Makefile.in in c/src/lib/libnetworking""... $ac_c" 1>&6
-echo "configure:3529: checking for Makefile.in in c/src/lib/libnetworking" >&5
+echo "configure:3512: checking for Makefile.in in c/src/lib/libnetworking" >&5
 if test -d $srcdir/c/src/lib/libnetworking; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3540,7 +3523,7 @@ fi
 
   
 echo $ac_n "checking for Makefile.in in c/src/lib/librpc""... $ac_c" 1>&6
-echo "configure:3544: checking for Makefile.in in c/src/lib/librpc" >&5
+echo "configure:3527: checking for Makefile.in in c/src/lib/librpc" >&5
 if test -d $srcdir/c/src/lib/librpc; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3555,14 +3538,14 @@ fi
 
   if test "$RTEMS_HAS_RDBG" = "yes"; then
     echo $ac_n "checking whether cpu supports rdbg? ""... $ac_c" 1>&6
-echo "configure:3559: checking whether cpu supports rdbg? " >&5
+echo "configure:3542: checking whether cpu supports rdbg? " >&5
     test ! -d "$srcdir/c/src/lib/librdbg/$target_cpu" && RTEMS_HAS_RDBG="no" ;
     echo "$ac_t""$RTEMS_HAS_RDBG" 1>&6
     if test "$RTEMS_HAS_RDBG" = "yes"; then
       # Extract the first word of "rpcgen", so it can be a program name with args.
 set dummy rpcgen; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3566: checking for $ac_word" >&5
+echo "configure:3549: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_RPCGEN'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3602,7 +3585,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3606: checking for $ac_word" >&5
+echo "configure:3589: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3636,7 +3619,7 @@ done
     if test "$RTEMS_HAS_RDBG" = "yes"; then
       
 echo $ac_n "checking for Makefile.in in c/src/lib/librdbg""... $ac_c" 1>&6
-echo "configure:3640: checking for Makefile.in in c/src/lib/librdbg" >&5
+echo "configure:3623: checking for Makefile.in in c/src/lib/librdbg" >&5
 if test -d $srcdir/c/src/lib/librdbg; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3663,7 +3646,7 @@ fi
 
 # If the tests are enabled, then find all the test suite Makefiles
 echo $ac_n "checking if the test suites are enabled? ""... $ac_c" 1>&6
-echo "configure:3667: checking if the test suites are enabled? " >&5
+echo "configure:3650: checking if the test suites are enabled? " >&5
 # Check whether --enable-tests or --disable-tests was given.
 if test "${enable_tests+set}" = set; then
   enableval="$enable_tests"
@@ -3684,7 +3667,7 @@ testtools_cfgdirs="c/src/tests/tools/generic"
 if test "$tests_enabled" = "yes"; then
    
 echo $ac_n "checking for Makefile.in in c/src/tests/libtests""... $ac_c" 1>&6
-echo "configure:3688: checking for Makefile.in in c/src/tests/libtests" >&5
+echo "configure:3671: checking for Makefile.in in c/src/tests/libtests" >&5
 if test -d $srcdir/c/src/tests/libtests; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3699,7 +3682,7 @@ fi
 
    
 echo $ac_n "checking for Makefile.in in c/src/tests/sptests""... $ac_c" 1>&6
-echo "configure:3703: checking for Makefile.in in c/src/tests/sptests" >&5
+echo "configure:3686: checking for Makefile.in in c/src/tests/sptests" >&5
 if test -d $srcdir/c/src/tests/sptests; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3714,7 +3697,7 @@ fi
 
    
 echo $ac_n "checking for Makefile.in in c/src/tests/tmtests""... $ac_c" 1>&6
-echo "configure:3718: checking for Makefile.in in c/src/tests/tmtests" >&5
+echo "configure:3701: checking for Makefile.in in c/src/tests/tmtests" >&5
 if test -d $srcdir/c/src/tests/tmtests; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3730,7 +3713,7 @@ fi
    if test "$RTEMS_HAS_MULTIPROCESSING" = "yes"; then
        
 echo $ac_n "checking for Makefile.in in c/src/tests/mptests""... $ac_c" 1>&6
-echo "configure:3734: checking for Makefile.in in c/src/tests/mptests" >&5
+echo "configure:3717: checking for Makefile.in in c/src/tests/mptests" >&5
 if test -d $srcdir/c/src/tests/mptests; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3747,7 +3730,7 @@ fi
    if test "$RTEMS_HAS_POSIX_API" = "yes"; then
      
 echo $ac_n "checking for Makefile.in in c/src/tests/psxtests""... $ac_c" 1>&6
-echo "configure:3751: checking for Makefile.in in c/src/tests/psxtests" >&5
+echo "configure:3734: checking for Makefile.in in c/src/tests/psxtests" >&5
 if test -d $srcdir/c/src/tests/psxtests; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3782,13 +3765,13 @@ fi
 
 if test "$RTEMS_HAS_HWAPI" = "yes"; then
   echo $ac_n "checking whether libwapi is present""... $ac_c" 1>&6
-echo "configure:3786: checking whether libwapi is present" >&5
+echo "configure:3769: checking whether libwapi is present" >&5
   if test -f ${srcdir}/c/src/lib/libhwapi/Makefile.in ; then
     echo "$ac_t""yes" 1>&6
     makefiles="$makefiles c/src/lib/libhwapi/Makefile"
     
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/analog""... $ac_c" 1>&6
-echo "configure:3792: checking for Makefile.in in c/src/lib/libhwapi/analog" >&5
+echo "configure:3775: checking for Makefile.in in c/src/lib/libhwapi/analog" >&5
 if test -d $srcdir/c/src/lib/libhwapi/analog; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3803,7 +3786,7 @@ fi
 
     
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/discrete""... $ac_c" 1>&6
-echo "configure:3807: checking for Makefile.in in c/src/lib/libhwapi/discrete" >&5
+echo "configure:3790: checking for Makefile.in in c/src/lib/libhwapi/discrete" >&5
 if test -d $srcdir/c/src/lib/libhwapi/discrete; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3818,7 +3801,7 @@ fi
 
     
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/drivers""... $ac_c" 1>&6
-echo "configure:3822: checking for Makefile.in in c/src/lib/libhwapi/drivers" >&5
+echo "configure:3805: checking for Makefile.in in c/src/lib/libhwapi/drivers" >&5
 if test -d $srcdir/c/src/lib/libhwapi/drivers; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3833,7 +3816,7 @@ fi
 
     
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory""... $ac_c" 1>&6
-echo "configure:3837: checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory" >&5
+echo "configure:3820: checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory" >&5
 if test -d $srcdir/c/src/lib/libhwapi/non_volatile_memory; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3848,7 +3831,7 @@ fi
 
     
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/serial""... $ac_c" 1>&6
-echo "configure:3852: checking for Makefile.in in c/src/lib/libhwapi/serial" >&5
+echo "configure:3835: checking for Makefile.in in c/src/lib/libhwapi/serial" >&5
 if test -d $srcdir/c/src/lib/libhwapi/serial; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3863,7 +3846,7 @@ fi
 
     
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/support""... $ac_c" 1>&6
-echo "configure:3867: checking for Makefile.in in c/src/lib/libhwapi/support" >&5
+echo "configure:3850: checking for Makefile.in in c/src/lib/libhwapi/support" >&5
 if test -d $srcdir/c/src/lib/libhwapi/support; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3878,7 +3861,7 @@ fi
 
     
 echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/wrapup""... $ac_c" 1>&6
-echo "configure:3882: checking for Makefile.in in c/src/lib/libhwapi/wrapup" >&5
+echo "configure:3865: checking for Makefile.in in c/src/lib/libhwapi/wrapup" >&5
 if test -d $srcdir/c/src/lib/libhwapi/wrapup; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3911,7 +3894,7 @@ fi
 # pick up all the Makefiles in required parts of the tree
 
 echo $ac_n "checking for Makefile.in in make""... $ac_c" 1>&6
-echo "configure:3915: checking for Makefile.in in make" >&5
+echo "configure:3898: checking for Makefile.in in make" >&5
 if test -d $srcdir/make; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3926,7 +3909,7 @@ fi
 
 
 echo $ac_n "checking for Makefile.in in c/src/lib/libchip""... $ac_c" 1>&6
-echo "configure:3930: checking for Makefile.in in c/src/lib/libchip" >&5
+echo "configure:3913: checking for Makefile.in in c/src/lib/libchip" >&5
 if test -d $srcdir/c/src/lib/libchip; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3941,7 +3924,7 @@ fi
 
 
 echo $ac_n "checking for Makefile.in in c/src/lib/libmisc""... $ac_c" 1>&6
-echo "configure:3945: checking for Makefile.in in c/src/lib/libmisc" >&5
+echo "configure:3928: checking for Makefile.in in c/src/lib/libmisc" >&5
 if test -d $srcdir/c/src/lib/libmisc; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -3956,7 +3939,7 @@ fi
 
 
 echo $ac_n "checking for Makefile.in in c/src/tests/samples""... $ac_c" 1>&6
-echo "configure:3960: checking for Makefile.in in c/src/tests/samples" >&5
+echo "configure:3943: checking for Makefile.in in c/src/tests/samples" >&5
 if test -d $srcdir/c/src/tests/samples; then
   rtems_av_save_dir=`pwd`;
   cd $srcdir;
@@ -4184,7 +4167,6 @@ s%@build_alias@%$build_alias%g
 s%@build_cpu@%$build_cpu%g
 s%@build_vendor@%$build_vendor%g
 s%@build_os@%$build_os%g
-s%@RTEMS_USE_OWN_PDIR@%$RTEMS_USE_OWN_PDIR%g
 s%@RTEMS_HAS_MULTIPROCESSING@%$RTEMS_HAS_MULTIPROCESSING%g
 s%@RTEMS_HAS_POSIX_API@%$RTEMS_HAS_POSIX_API%g
 s%@RTEMS_HAS_NETWORKING@%$RTEMS_HAS_NETWORKING%g
diff --git a/configure.in b/configure.in
index 47d2a21617..f7bfda10b8 100644
--- a/configure.in
+++ b/configure.in
@@ -14,7 +14,6 @@ AC_CANONICAL_SYSTEM
 AC_ARG_WITH(cross-host,[  --with-cross-host=HOST      host (cygnus)], \
 host=$withval)
 
-RTEMS_ENABLE_GMAKE_PRINT
 RTEMS_ENABLE_MULTIPROCESSING
 RTEMS_ENABLE_POSIX
 RTEMS_ENABLE_NETWORKING
diff --git a/make/Templates/Makefile.inc.in b/make/Templates/Makefile.inc.in
index 1c01539aad..a763dae999 100644
--- a/make/Templates/Makefile.inc.in
+++ b/make/Templates/Makefile.inc.in
@@ -32,7 +32,7 @@ export OBJCOPY
 RTEMS_HOST = @RTEMS_HOST@
 RTEMS_CUSTOM = $(prefix)/make/custom/$(RTEMS_BSP).cfg
 PROJECT_ROOT = $(prefix)/
-RTEMS_USE_OWN_PDIR = @RTEMS_USE_OWN_PDIR@
+RTEMS_USE_OWN_PDIR = no
 RTEMS_HAS_POSIX_API = @RTEMS_HAS_POSIX_API@
 RTEMS_USE_MACROS = @RTEMS_USE_MACROS@
 RTEMS_HAS_CPLUSPLUS = @RTEMS_HAS_CPLUSPLUS@
diff --git a/make/directory.cfg b/make/directory.cfg
index 68b68d79e0..1714204318 100644
--- a/make/directory.cfg
+++ b/make/directory.cfg
@@ -8,50 +8,17 @@
 #   See also make/main.cfg
 #
 
-# include $(RTEMS_ROOT)/make/main.cfg
+# RULE=$(shell echo $@ | $(SED) -e s/debug_// -e s/profile_//)
 
-# on a 'make -k' we don't want to bomb out of directory list
-EXIT_CMD=exit 1
-ifeq (k, $(findstring k, $(MAKEFLAGS)))
-EXIT_CMD=true
-endif
-
-RULE=$(shell echo $@ | $(SED) -e s/debug_// -e s/profile_//)
-
-ifeq ($(RTEMS_USE_OWN_PDIR),yes)
+# This is a simplified variant of automake-1.4's rule for handling 
+# subdirectories
 $(RECURSE_TARGETS):
-	@$(ECHO); \
-        BASEDIR=`pwd`; \
-        test -d $$BASEDIR || $(EXIT_CMD) ; \
-        for subd in $(SUB_DIRS) xxx; \
-	do if [ $$subd != xxx ] ; then  \
-	    cd $$BASEDIR; \
-	    if [ ! -d $$subd ] ; then \
-	      $(ECHO) "*** ERROR -- Directory ($$subd) does not exist!!!"; \
-	      $(EXIT_CMD) ; \
-	    fi ; \
-	    $(ECHO); \
-            $(ECHO) "***  $$BASEDIR/$$subd ($@)" ; \
-	    cmd="cd $$subd; $(MAKE) $(RULE)"; \
-	    $(ECHO) $$cmd; \
-	    eval $$cmd || $(EXIT_CMD); \
-  fi; done; \
-        $(ECHO); \
-        $(ECHO) "***  $$BASEDIR/$@ ($@) Finished."; \
-        $(ECHO)
-	$($@_WRAPUP)
-else
-ifdef RECURSE_TARGETS
-$(RECURSE_TARGETS):
-	@$(ECHO) ; set -e ; \
-	if [ "$(SUB_DIRS)" != "" ] ; then \
-	  sdirs="$(SUB_DIRS)" ; \
-	else \
-	  sdirs="xxx" ; \
-	fi ; \
-	if [ "$$sdirs" != "xxx" ] ; then \
-	  for subd in $$sdirs; do $(MAKE) -w -C $$subd $(RULE); done ;\
-	fi
-endif
-endif
-
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed -e s/-recursive// -e s/debug_// -e s/profile_// `; \
+	list='$(SUB_DIRS)'; for subdir in $$list; do \
+	  echo "Making $$target RTEMS_BSP=${RTEMS_BSP} in $$subdir"; \
+	  local_target="$$target"; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
diff --git a/make/main.cfg b/make/main.cfg
index f35000a989..a2599ce2ab 100644
--- a/make/main.cfg
+++ b/make/main.cfg
@@ -66,10 +66,6 @@ VARIANTS=${TARGET_ARCH} ${TARGET_VARIANTS:%=${TARGET_ARCH}-%}
 RECURSE_TARGETS=all clean protos get clobber depend install \
                 $(TARGET_VARIANTS) $(TARGET_VARIANTS:%=%_install)
 
-ifeq ($(RTEMS_USE_OWN_PDIR),yes)
-MAKEFLAGS += --no-print-directory
-endif
-
 ${ARCH}:
 	test -d ${ARCH} || $(MKDIR) ${ARCH}
 
diff --git a/make/target.cfg.in b/make/target.cfg.in
index cbba810741..5a4a6c8100 100644
--- a/make/target.cfg.in
+++ b/make/target.cfg.in
@@ -38,7 +38,6 @@ export CXX
 RTEMS_CROSS_TARGET=@rtems_cv_prog_cc_cross@
 
 RTEMS_HOST = @RTEMS_HOST@
-RTEMS_USE_OWN_PDIR = @RTEMS_USE_OWN_PDIR@
 RTEMS_HAS_MULTIPROCESSING = @RTEMS_HAS_MULTIPROCESSING@
 RTEMS_HAS_POSIX_API = @RTEMS_HAS_POSIX_API@
 RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
diff --git a/tools/update/cipolish b/tools/update/cipolish
index 61af53312c..e7a72c92ab 100755
--- a/tools/update/cipolish
+++ b/tools/update/cipolish
@@ -81,8 +81,12 @@ while( <> )
   {
     #remove the line
   }
-  elsif ( /^[ 	]*AC_SUBST\(RTEMS_USE_OWN_PDIR\)[ 	]*$/o ) 
-  {
+  elsif ( /^[\s\t]*AC_SUBST\(RTEMS_USE_OWN_PDIR\)[ 	]*$/o ) 
+  { # obsolete option
+    #remove the line
+  }
+  elsif ( /^[\s\t]*RTEMS_ENABLE_GMAKE_PRINT[     ]*$/o ) 
+  { # obsolete macro
     #remove the line
   }
   elsif ( /^[ 	]*AC_SUBST\(RTEMS_HAS_NETWORKING\)[ 	]*$/o )