@c
@c COPYRIGHT (c) 1988-1998.
@c On-Line Applications Research Corporation (OAR).
@c All rights reserved.
@c
@c $Id$
@c
@ifinfo
@node Timer Manager, Timer Manager Introduction, CLOCK_TICK - Announce a clock tick, Top
@end ifinfo
@chapter Timer Manager
@ifinfo
@menu
* Timer Manager Introduction::
* Timer Manager Background::
* Timer Manager Operations::
* Timer Manager Directives::
@end menu
@end ifinfo
@ifinfo
@node Timer Manager Introduction, Timer Manager Background, Timer Manager, Timer Manager
@end ifinfo
@section Introduction
The timer manager provides support for timer
facilities. The directives provided by the timer manager are:
@itemize @bullet
@item @code{timer_create} - Create a timer
@item @code{timer_ident} - Get ID of a timer
@item @code{timer_cancel} - Cancel a timer
@item @code{timer_delete} - Delete a timer
@item @code{timer_fire_after} - Fire timer after interval
@item @code{timer_fire_when} - Fire timer when specified
@item @code{timer_reset} - Reset an interval timer
@end itemize
@ifinfo
@node Timer Manager Background, Timer Manager Required Support, Timer Manager Introduction, Timer Manager
@end ifinfo
@section Background
@ifinfo
@menu
* Timer Manager Required Support::
* Timers::
* Timer Service Routines::
@end menu
@end ifinfo
@ifinfo
@node Timer Manager Required Support, Timers, Timer Manager Background, Timer Manager Background
@end ifinfo
@subsection Required Support
A clock tick is required to support the functionality provided by this manager.
@ifinfo
@node Timers, Timer Service Routines, Timer Manager Required Support, Timer Manager Background
@end ifinfo
@subsection Timers
A timer is an RTEMS object which allows the
application to schedule operations to occur at specific times in
the future. User supplied timer service routines are invoked by
the clock_tick directive when the timer fires. Timer service
routines may perform any operations or directives which normally
would be performed by the application code which invoked the
clock_tick directive.
The timer can be used to implement watchdog routines
which only fire to denote that an application error has
occurred. The timer is reset at specific points in the
application to insure that the watchdog does not fire. Thus, if
the application does not reset the watchdog timer, then the
timer service routine will fire to indicate that the application
has failed to reach a reset point. This use of a timer is
sometimes referred to as a "keep alive" or a "deadman" timer.
@ifinfo
@node Timer Service Routines, Timer Manager Operations, Timers, Timer Manager Background
@end ifinfo
@subsection Timer Service Routines
The timer service routine should adhere to @value{LANGUAGE} calling
conventions and have a prototype similar to the following:
@ifset is-C
@example
rtems_timer_service_routine user_routine(
rtems_id timer_id,
void *user_data
);
@end example
@end ifset
@ifset is-Ada
@example
procedure User_Routine(
Timer_ID : in RTEMS.ID;
User_Data : in System.Address
);
@end example
@end ifset
Where the timer_id parameter is the RTEMS object ID
of the timer which is being fired and user_data is a pointer to
user-defined information which may be utilized by the timer
service routine. The argument user_data may be NULL.
@ifinfo
@node Timer Manager Operations, Creating a Timer, Timer Service Routines, Timer Manager
@end ifinfo
@section Operations
@ifinfo
@menu
* Creating a Timer::
* Obtaining Timer IDs::
* Initiating an Interval Timer::
* Initiating a Time of Day Timer::
* Canceling a Timer::
* Resetting a Timer::
* Deleting a Timer::
@end menu
@end ifinfo
@ifinfo
@node Creating a Timer, Obtaining Timer IDs, Timer Manager Operations, Timer Manager Operations
@end ifinfo
@subsection Creating a Timer
The timer_create directive creates a timer by
allocating a Timer Control Block (TMCB), assigning the timer a
user-specified name, and assigning it a timer ID. Newly created
timers do not have a timer service routine associated with them
and are not active.
@ifinfo
@node Obtaining Timer IDs, Initiating an Interval Timer, Creating a Timer, Timer Manager Operations
@end ifinfo
@subsection Obtaining Timer IDs
When a timer is created, RTEMS generates a unique
timer ID and assigns it to the created timer until it is
deleted. The timer ID may be obtained by either of two methods.
First, as the result of an invocation of the timer_create
directive, the timer ID is stored in a user provided location.
Second, the timer ID may be obtained later using the timer_ident
directive. The timer ID is used by other directives to
manipulate this timer.
@ifinfo
@node Initiating an Interval Timer, Initiating a Time of Day Timer, Obtaining Timer IDs, Timer Manager Operations
@end ifinfo
@subsection Initiating an Interval Timer
The timer_fire_after directive initiates a timer to
fire a user provided timer service routine after the specified
number of clock ticks have elapsed. When the interval has
elapsed, the timer service routine will be invoked from the
clock_tick directive.
@ifinfo
@node Initiating a Time of Day Timer, Canceling a Timer, Initiating an Interval Timer, Timer Manager Operations
@end ifinfo
@subsection Initiating a Time of Day Timer
The timer_fire_when directive initiates a timer to
fire a user provided timer service routine when the specified
time of day has been reached. When the interval has elapsed,
the timer service routine will be invoked from the clock_tick
directive.
@ifinfo
@node Canceling a Timer, Resetting a Timer, Initiating a Time of Day Timer, Timer Manager Operations
@end ifinfo
@subsection Canceling a Timer
The timer_cancel directive is used to halt the
specified timer. Once canceled, the timer service routine will
not fire unless the timer is reinitiated. The timer can be
reinitiated using the timer_reset, timer_fire_after, and
timer_fire_when directives.
@ifinfo
@node Resetting a Timer, Deleting a Timer, Canceling a Timer, Timer Manager Operations
@end ifinfo
@subsection Resetting a Timer
The timer_reset directive is used to restore an
interval timer initiated by a previous invocation of
timer_fire_after to its original interval length. If the
timer has not been used or the last usage of this timer
was by a timer_fire_when directive, then an error is
returned. The timer service routine is not changed or
fired by this directive.
@ifinfo
@node Deleting a Timer, Timer Manager Directives, Resetting a Timer, Timer Manager Operations
@end ifinfo
@subsection Deleting a Timer
The timer_delete directive is used to delete a timer.
If the timer is running and has not expired, the timer is
automatically canceled. The timer's control block is returned
to the TMCB free list when it is deleted. A timer can be
deleted by a task other than the task which created the timer.
Any subsequent references to the timer's name and ID are invalid.
@ifinfo
@node Timer Manager Directives, TIMER_CREATE - Create a timer, Deleting a Timer, Timer Manager
@end ifinfo
@section Directives
@ifinfo
@menu
* TIMER_CREATE - Create a timer::
* TIMER_IDENT - Get ID of a timer::
* TIMER_CANCEL - Cancel a timer::
* TIMER_DELETE - Delete a timer::
* TIMER_FIRE_AFTER - Fire timer after interval::
* TIMER_FIRE_WHEN - Fire timer when specified::
* TIMER_RESET - Reset an interval timer::
@end menu
@end ifinfo
This section details the timer manager's directives.
A subsection is dedicated to each of this manager's directives
and describes the calling sequence, related constants, usage,
and status codes.
@page
@ifinfo
@node TIMER_CREATE - Create a timer, TIMER_IDENT - Get ID of a timer, Timer Manager Directives, Timer Manager Directives
@end ifinfo
@subsection TIMER_CREATE - Create a timer
@subheading CALLING SEQUENCE:
@ifset is-C
@example
rtems_status_code rtems_timer_create(
rtems_name name,
rtems_id *id
);
@end example
@end ifset
@ifset is-Ada
@example
procedure Timer_Create (
Name : in RTEMS.Name;
ID : out RTEMS.ID;
Result : out RTEMS.Status_Codes
);
@end example
@end ifset
@subheading DIRECTIVE STATUS CODES:
@code{SUCCESSFUL} - timer created successfully@*
@code{INVALID_NAME} - invalid timer name@*
@code{TOO_MANY} - too many timers created
@subheading DESCRIPTION:
This directive creates a timer. The assigned timer
id is returned in id. This id is used to access the timer with
other timer manager directives. For control and maintenance of
the timer, RTEMS allocates a TMCB from the local TMCB free pool
and initializes it.
@subheading NOTES:
This directive will not cause the calling task to be
preempted.
@page
@ifinfo
@node TIMER_IDENT - Get ID of a timer, TIMER_CANCEL - Cancel a timer, TIMER_CREATE - Create a timer, Timer Manager Directives
@end ifinfo
@subsection TIMER_IDENT - Get ID of a timer
@subheading CALLING SEQUENCE:
@ifset is-C
@example
rtems_status_code rtems_timer_ident(
rtems_name name,
rtems_id *id
);
@end example
@end ifset
@ifset is-Ada
@example
procedure Timer_Ident (
Name : in RTEMS.Name;
ID : out RTEMS.ID;
Result : out RTEMS.Status_Codes
);
@end example
@end ifset
@subheading DIRECTIVE STATUS CODES:
@code{SUCCESSFUL} - timer identified successfully@*
@code{INVALID_NAME} - timer name not found
@subheading DESCRIPTION:
This directive obtains the timer id associated with
the timer name to be acquired. If the timer name is not unique,
then the timer id will match one of the timers with that name.
However, this timer id is not guaranteed to correspond to the
desired timer. The timer id is used to access this timer in
other timer related directives.
@subheading NOTES:
This directive will not cause the running task to be
preempted.
@page
@ifinfo
@node TIMER_CANCEL - Cancel a timer, TIMER_DELETE - Delete a timer, TIMER_IDENT - Get ID of a timer, Timer Manager Directives
@end ifinfo
@subsection TIMER_CANCEL - Cancel a timer
@subheading CALLING SEQUENCE:
@ifset is-C
@example
rtems_status_code rtems_timer_cancel(
rtems_id id
);
@end example
@end ifset
@ifset is-Ada
@example
procedure Timer_Cancel (
ID : in RTEMS.ID;
Result : out RTEMS.Status_Codes
);
@end example
@end ifset
@subheading DIRECTIVE STATUS CODES:
@code{SUCCESSFUL} - timer canceled successfully@*
@code{INVALID_ID} - invalid timer id
@subheading DESCRIPTION:
This directive cancels the timer id. This timer will
be reinitiated by the next invocation of timer_reset,
timer_fire_after, or timer_fire_when with id.
@subheading NOTES:
This directive will not cause the running task to be preempted.
@page
@ifinfo
@node TIMER_DELETE - Delete a timer, TIMER_FIRE_AFTER - Fire timer after interval, TIMER_CANCEL - Cancel a timer, Timer Manager Directives
@end ifinfo
@subsection TIMER_DELETE - Delete a timer
@subheading CALLING SEQUENCE:
@ifset is-C
@example
rtems_status_code rtems_timer_delete(
rtems_id id
);
@end example
@end ifset
@ifset is-Ada
@example
procedure Timer_Delete (
ID : in RTEMS.ID;
Result : out RTEMS.Status_Codes
);
@end example
@end ifset
@subheading DIRECTIVE STATUS CODES:
@code{SUCCESSFUL} - timer deleted successfully@*
@code{INVALID_ID} - invalid timer id
@subheading DESCRIPTION:
This directive deletes the timer specified by id. If
the timer is running, it is automatically canceled. The TMCB
for the deleted timer is reclaimed by RTEMS.
@subheading NOTES:
This directive will not cause the running task to be
preempted.
A timer can be deleted by a task other than the task
which created the timer.
@page
@ifinfo
@node TIMER_FIRE_AFTER - Fire timer after interval, TIMER_FIRE_WHEN - Fire timer when specified, TIMER_DELETE - Delete a timer, Timer Manager Directives
@end ifinfo
@subsection TIMER_FIRE_AFTER - Fire timer after interval
@subheading CALLING SEQUENCE:
@ifset is-C
@example
rtems_status_code rtems_timer_fire_after(
rtems_id id,
rtems_interval ticks,
rtems_timer_service_routine_entry routine,
void *user_data
);
@end example
@end ifset
@ifset is-Ada
@example
procedure Timer_Fire_After (
ID : in RTEMS.ID;
Ticks : in RTEMS.Interval;
Routine : in RTEMS.Timer_Service_Routine;
User_Data : in RTEMS.Address;
Result : out RTEMS.Status_Codes
);
@end example
@end ifset
@subheading DIRECTIVE STATUS CODES:
@code{SUCCESSFUL} - timer initiated successfully@*
@code{INVALID_ID} - invalid timer id@*
@code{INVALID_NUMBER} - invalid interval
@subheading DESCRIPTION:
This directive initiates the timer specified by id.
If the timer is running, it is automatically canceled before
being initiated. The timer is scheduled to fire after an
interval ticks clock ticks has passed. When the timer fires,
the timer service routine routine will be invoked with the
argument user_data.
@subheading NOTES:
This directive will not cause the running task to be
preempted.
@page
@ifinfo
@node TIMER_FIRE_WHEN - Fire timer when specified, TIMER_RESET - Reset an interval timer, TIMER_FIRE_AFTER - Fire timer after interval, Timer Manager Directives
@end ifinfo
@subsection TIMER_FIRE_WHEN - Fire timer when specified
@subheading CALLING SEQUENCE:
@ifset is-C
@example
rtems_status_code rtems_timer_fire_when(
rtems_id id,
rtems_time_of_day *wall_time,
rtems_timer_service_routine_entry routine,
void *user_data
);
@end example
@end ifset
@ifset is-Ada
@example
procedure Timer_Fire_When (
ID : in RTEMS.ID;
Wall_Time : in RTEMS.Time_Of_Day;
Routine : in RTEMS.Timer_Service_Routine;
User_Data : in RTEMS.Address;
Result : out RTEMS.Status_Codes
);
@end example
@end ifset
@subheading DIRECTIVE STATUS CODES:
@code{SUCCESSFUL} - timer initiated successfully@*
@code{INVALID_ID} - invalid timer id@*
@code{NOT_DEFINED} - system date and time is not set@*
@code{INVALID_CLOCK} - invalid time of day
@subheading DESCRIPTION:
This directive initiates the timer specified by id.
If the timer is running, it is automatically canceled before
being initiated. The timer is scheduled to fire at the time of
day specified by wall_time. When the timer fires, the timer
service routine routine will be invoked with the argument
user_data.
@subheading NOTES:
This directive will not cause the running task to be
preempted.
@page
@ifinfo
@node TIMER_RESET - Reset an interval timer, Semaphore Manager, TIMER_FIRE_WHEN - Fire timer when specified, Timer Manager Directives
@end ifinfo
@subsection TIMER_RESET - Reset an interval timer
@subheading CALLING SEQUENCE:
@ifset is-C
@example
rtems_status_code rtems_timer_reset(
rtems_id id
);
@end example
@end ifset
@ifset is-Ada
@example
procedure Timer_Reset (
ID : in RTEMS.ID;
Result : out RTEMS.Status_Codes
);
@end example
@end ifset
@subheading DIRECTIVE STATUS CODES:
@code{SUCCESSFUL} - timer reset successfully@*
@code{INVALID_ID} - invalid timer id@*
@code{NOT_DEFINED} - attempted to reset a when or newly created timer
@subheading DESCRIPTION:
This directive resets the timer associated with id.
This timer must have been previously initiated with a
timer_fire_after directive. If active the timer is canceled,
after which the timer is reinitiated using the same interval and
timer service routine which the original timer_fire_after
directive used.
@subheading NOTES:
If the timer has not been used or the last usage of this timer
was by a timer_fire_when directive, then the NOT_DEFINED error is
returned.
Restarting a cancelled after timer results in the timer being
reinitiated with its previous timer service routine and interval.
This directive will not cause the running task to be preempted.
