/* sh.h
*
* This include file contains information pertaining to the Hitachi SH
* processor.
*
* Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and
* Bernd Becker (becker@faw.uni-ulm.de)
*
* COPYRIGHT (c) 1997-1998, FAW Ulm, Germany
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE
*
*
* COPYRIGHT (c) 1998.
* On-Line Applications Research Corporation (OAR).
* Copyright assigned to U.S. Government, 1994.
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.OARcorp.com/rtems/license.html.
*
* $Id$
*/
#ifndef _sh_h
#define _sh_h
#ifdef __cplusplus
extern "C" {
#endif
/*
* This file contains the information required to build
* RTEMS for a particular member of the "SH" family.
*
* It does this by setting variables to indicate which implementation
* dependent features are present in a particular member of the family.
*/
#if defined(rtems_multilib)
/*
* Figure out all CPU Model Feature Flags based upon compiler
* predefines.
*/
#define CPU_MODEL_NAME "rtems_multilib"
#define SH_HAS_FPU 0
#define SH_HAS_SEPARATE_STACKS 1
#else
#if defined(__sh1__) || defined(__sh2__) || defined(__sh3__)
#define SH_HAS_FPU 0
#else
#define SH_HAS_FPU 1
#endif
/* this should not be here */
#define CPU_MODEL_NAME "SH-Multilib"
#endif /* multilib */
/*
* If the following macro is set to 0 there will be no software irq stack
*/
#ifndef SH_HAS_SEPARATE_STACKS
#define SH_HAS_SEPARATE_STACKS 1
#endif
/*
* Define the name of the CPU family.
*/
#define CPU_NAME "Hitachi SH"
#ifndef ASM
/*
* Mask for disabling interrupts
*/
#define SH_IRQDIS_VALUE 0xf0
#define sh_disable_interrupts( _level ) \
asm volatile ( \
"stc sr,%0\n\t" \
"ldc %1,sr\n\t"\
: "=&r" (_level ) \
: "r" (SH_IRQDIS_VALUE) );
#define sh_enable_interrupts( _level ) \
asm volatile( "ldc %0,sr\n\t" \
"nop\n\t" \
:: "r" (_level) );
/*
* This temporarily restores the interrupt to _level before immediately
* disabling them again. This is used to divide long RTEMS critical
* sections into two or more parts. The parameter _level is not
* modified.
*/
#define sh_flash_interrupts( _level ) \
asm volatile( \
"ldc %1,sr\n\t" \
"nop\n\t" \
"ldc %0,sr\n\t" \
"nop\n\t" \
: : "r" (SH_IRQDIS_VALUE), "r" (_level) );
#define sh_get_interrupt_level( _level ) \
{ \
register unsigned32 _tmpsr ; \
\
asm volatile( "stc sr, %0" : "=r" (_tmpsr) ); \
_level = (_tmpsr & 0xf0) >> 4 ; \
}
#define sh_set_interrupt_level( _newlevel ) \
{ \
register unsigned32 _tmpsr; \
\
asm volatile ( "stc sr, %0" : "=r" (_tmpsr) ); \
_tmpsr = ( _tmpsr & ~0xf0 ) | ((_newlevel) << 4) ; \
asm volatile( "ldc %0,sr" :: "r" (_tmpsr) ); \
}
/*
* The following routine swaps the endian format of an unsigned int.
* It must be static because it is referenced indirectly.
*/
static inline unsigned int sh_swap_u32(
unsigned int value
)
{
register unsigned int swapped;
asm volatile (
"swap.b %1,%0; "
"swap.w %0,%0; "
"swap.b %0,%0"
: "=r" (swapped)
: "r" (value) );
return( swapped );
}
static inline unsigned int sh_swap_u16(
unsigned int value
)
{
register unsigned int swapped ;
asm volatile ( "swap.b %1,%0" : "=r" (swapped) : "r" (value) );
return( swapped );
}
#define CPU_swap_u32( value ) sh_swap_u32( value )
#define CPU_swap_u16( value ) sh_swap_u16( value )
extern unsigned int sh_set_irq_priority(
unsigned int irq,
unsigned int prio );
#endif /* !ASM */
#ifdef __cplusplus
}
#endif
#endif
