blob: fce2fa8b368ebf5e5e7a14b64591903603201078 (
plain) (
tree)
|
|
#include <ambapp.h>
#include <rtems/libio.h>
#include <grspw_pci.h>
/* Select PCI driver */
#define GRSPW_PCI
#undef GRSPW_MAXDEVS
#undef DEBUG_SPACEWIRE_ONOFF
/* Only Malloced memory supported
*/
#undef GRSPW_LOCAL_MEM
/* memory must be aligned to a 128k boundary */
unsigned int grspwpci_memarea_address;
#define GRSPW_LOCAL_MEM_ADR grspwpci_memarea_address
/* We have custom address tranlation for HW addresses */
#define GRSPW_ADR_TO
/* MEMAREA=>CPU used when reading descriptor buffer pointers,
* they need to be translated from adresses used by GRSPW HW
* into CPU readable addresses.
*
* NOT NEEDED AS GRSPW DRIVER USES INDEXES TO GET DESCRIPTOR
* DATA POINTER ADDRESSES.
*/
#undef GRSPW_ADR_FROM
/* Set registered device name */
#define GRSPW_DEVNAME "/dev/grspwpci0"
#define GRSPW_DEVNAME_NO(devstr,no) ((devstr)[13]='0'+(no))
/* Any non-static function will begin with */
#define GRSPW_PREFIX(name) grspwpci##name
/* do nothing, assume that the interrupt handler is called
* setup externally calling b1553_interrupt_handler.
*/
#define GRSPW_REG_INT(handler,irq,arg) \
if ( grspw_pci_int_reg ) \
grspw_pci_int_reg(handler,irq,arg);
void (*grspw_pci_int_reg)(void *handler, int irq, void *arg) = 0;
#ifdef GRSPW_ADR_TO
/* Translate an address within the Memory Region (memarea) into an Hardware
* device address. This address is put into hardware registers or descriptors
* so that the hardware can access the Memory Region.
* Example:
* A local AMBA access at 0xe0000000 will translate into PCI address 0x40000000,
* the PCI address 0x40000000 will translate into LEON-AMBA address 0x40000000.
*/
unsigned int grspwpci_hw_address;
static inline unsigned int memarea_to_hw(unsigned int addr) {
/* don't translate? */
if ( grspwpci_hw_address == 0xffffffff )
return addr;
return ((addr & 0x0fffffff) | grspwpci_hw_address);
}
#endif
/* not used since BRM Core work with offsets */
#ifdef GRSPW_ADR_FROM
unsigned int grspwpci_cpu_access_address;
static inline unsigned int hw_to_cpu(unsigned int addr) {
/* don't translate? */
if ( grspwpci_cpu_address == 0xffffffff )
return addr;
return ((addr & 0x0fffffff) | grspwpci_cpu_address);
}
#endif
int grspwpci_interrupt_handler(int irq, void *arg);
#include "grspw.c"
/*
*
* memarea = preallocated memory somewhere, pointer to start of memory.
* hw_address = how to translate a memarea address into an HW device AMBA address.
*/
int grspw_pci_register(
struct ambapp_bus *bus,
unsigned int memarea,
unsigned int hw_address
)
{
/* Setup configuration */
/* if zero the malloc will be used */
grspwpci_memarea_address = memarea;
grspwpci_hw_address = hw_address;
#ifdef GRSPW_ADR_FROM
grspwpci_cpu_address = memarea & 0xf0000000;
#endif
/* Register the driver */
return GRSPW_PREFIX(_register)(bus);
}
/* Call this from PCI interrupt handler
* irq = the irq number of the HW device local to that IRQMP controller
*
*/
int grspwpci_interrupt_handler(int irq, void *arg){
grspw_interrupt( (GRSPW_DEV *)arg );
return 0;
}
#if 0
int grspw_pci_interrupt_handler(int irqmask){
int i;
unsigned int mask=0;
/* find minor */
for(i=0; i<spw_cores; i++){
if ( (1<<SPW_PARAM(i).irq) & irqmask ){
mask |= 1<<SPW_PARAM(i).irq;
grspw_interrupt(i);
/* more interrupts to scan for? */
if ( irqmask & ~mask )
return mask; /* handled */
}
}
return mask;
}
#endif
|
