#include <ambapp.h>
#include <b1553brm_pci.h>
/* Select PCI driver */
#define B1553BRM_NO_AMBA
#define B1553BRM_PCI
#undef B1553BRM_MAXDEVS
/* Use only 16K memory */
#define DMA_MEM_16K
/* Malloced memory or
* Card local memory
*/
#define B1553BRM_LOCAL_MEM
#define DONT_DEF_RAMON
/* memory must be aligned to a 128k boundary */
unsigned int brmpci_memarea_address;
#define B1553BRM_LOCAL_MEM_ADR brmpci_memarea_address
/* We have custom address tranlation for HW addresses */
#define B1553BRM_ADR_TO
/* No custom MEMAREA=>CPU used since BRM Core work with offsets
* in it's descriptors.
*/
#undef B1553BRM_ADR_FROM
/* Set registered device name */
#define B1553BRM_DEVNAME "/dev/brmpci0"
#define B1553BRM_DEVNAME_NO(devstr,no) ((devstr)[11]='0'+(no))
/* Any non-static function will begin with */
#define B1553BRM_PREFIX(name) b1553brmpci##name
/* do nothing, assume that the interrupt handler is called
* setup externally calling b1553_interrupt_handler.
*/
#define B1553BRM_REG_INT(handler,irq,arg) \
if ( b1553brm_pci_int_reg ) \
b1553brm_pci_int_reg(handler,irq,arg);
#ifdef B1553BRM_ADR_TO
/* Translate a address within the Memory Region (memarea) into an Hardware
* device address. This address is put into hardware registers or descriptors
* so that the hardware can access the Memory Region.
* Example:
* An local AMBA access at 0xe0000000 will translate into PCI address 0x40000000,
* the PCI address 0x40000000 will translate into CPU-AMBA address 0x40000000.
*/
unsigned int brmpci_hw_address;
static inline unsigned int memarea_to_hw(unsigned int addr) {
/* don't translate? */
if ( brmpci_hw_address == 0xffffffff )
return addr;
return ((addr & 0x000fffff) | brmpci_hw_address);
}
#endif
/* not used since BRM Core work with offsets */
#ifdef B1553BRM_ADR_FROM
unsigned int brmpci_cpu_access_address;
static inline unsigned int hw_to_cpu(unsigned int addr) {
/* don't translate? */
if ( brmpci_cpu_address == 0xffffffff )
return addr;
return ((addr & 0x0fffffff) | brmpci_cpu_address);
}
#endif
void (*b1553brm_pci_int_reg)(void *handler, int irq, void *arg) = 0;
static void b1553brmpci_interrupt_handler(int irq, void *arg);
#include "b1553brm.c"
/*
*
* memarea = preallocated memory somewhere, pointer to start of memory.
* hw_address = how to translate a memarea address into an HW device AMBA address.
*/
int b1553brm_pci_register(
struct ambapp_bus *bus,
unsigned int clksel,
unsigned int clkdiv,
unsigned int brm_freq,
unsigned int memarea,
unsigned int hw_address
)
{
/* Setup configuration */
/* if zero malloc will be used */
brmpci_memarea_address = memarea;
brmpci_hw_address = hw_address;
#ifdef B1553BRM_ADR_FROM
brmpci_cpu_address = memarea & 0xf0000000;
#endif
/* Register the driver */
return B1553BRM_PREFIX(_register)(bus,clksel,clkdiv,brm_freq);
}
/* Call this from PCI interrupt handler
* irq = the irq number of the HW device local to that IRQMP controller
*
*/
static void b1553brmpci_interrupt_handler(int irq, void *arg){
brm_interrupt(arg);
}
#if 0
int b1553brm_pci_interrupt_handler(int irqmask){
int i;
unsigned int mask=0;
/* find minor */
for(i=0; i<brm_cores; i++){
if ( (1<<brms[i].irqno) & irqmask ){
mask |= 1<<brms[i].irqno;
brm_interrupt(&brms[i]);
/* more interrupts to scan for? */
if ( irqmask & ~mask )
return mask; /* handled */
}
}
return mask;
}
#endif
