/* bspstart.c
*
* This set of routines starts the application. It includes application,
* board, and monitor specific initialization and configuration.
* The generic CPU dependent initialization has been performed
* before any of these are invoked.
*
* Called by RTEMS::RTEMS constructor in rtems-ctor.cc
*
* COPYRIGHT (c) 1989-1998.
* On-Line Applications Research Corporation (OAR).
* Copyright assigned to U.S. Government, 1994.
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.OARcorp.com/rtems/license.html.
*
* Ported to ERC32 implementation of the SPARC by On-Line Applications
* Research Corporation (OAR) under contract to the European Space
* Agency (ESA).
*
* ERC32 modifications of respective RTEMS file: COPYRIGHT (c) 1995.
* European Space Agency.
*
* $Id$
*/
#include <bsp.h>
#include <rtems/libio.h>
#include <libcsupport.h>
#include <string.h>
#ifdef STACK_CHECKER_ON
#include <stackchk.h>
#endif
/*
* The original table from the application and our copy of it with
* some changes.
*/
extern rtems_configuration_table Configuration;
rtems_configuration_table BSP_Configuration;
rtems_cpu_table Cpu_table;
rtems_unsigned32 bsp_isr_level;
/*
* Tells us where to put the workspace in case remote debugger is present.
*/
extern rtems_unsigned32 rdb_start;
/*
* Amount to increment itimer by each pass
* It is a variable instead of a #define to allow the 'looptest'
* script to bump it without recompiling rtems
*
* NOTE: This is based on the PA-RISC simulator. I don't know if we
* can actually pull this trick on the SPARC simulator.
*/
rtems_unsigned32 CPU_SPARC_CLICKS_PER_TICK;
#if SIMSPARC_FAST_IDLE
/*
* Many of the tests are very slow on the simulator because they have
* have 5 second delays hardwired in.
*
* Try to speed those tests up by speeding up the clock when in the idle task.
*
* NOTE: At the current setting, 5 second delays in the tests take
* approximately 5 seconds of wall time.
*/
rtems_extension
fast_idle_switch_hook(rtems_tcb *current_task,
rtems_tcb *heir_task)
{
static rtems_unsigned32 normal_clock = ~0;
static rtems_unsigned32 fast_clock;
/* init our params on first call */
if (normal_clock == ~0)
{
normal_clock = CPU_SPARC_CLICKS_PER_TICK;
fast_clock = CPU_SPARC_CLICKS_PER_TICK / 0x08;
if (fast_clock == 0) /* handle pathological case */
fast_clock++;
}
/*
* Run the clock faster when idle is in place.
*/
if (heir_task == _Thread_Idle)
CPU_SPARC_CLICKS_PER_TICK = fast_clock;
else if (current_task == _Thread_Idle)
CPU_SPARC_CLICKS_PER_TICK = normal_clock;
}
#endif
/*
* bsp_libc_init
*
* Initialize whatever libc we are using called from bsp_postdriver_hook.
*/
void bsp_libc_init(void)
{
extern int end;
rtems_unsigned32 heap_start;
rtems_unsigned32 heap_size;
heap_start = (rtems_unsigned32) &end;
if (heap_start & (CPU_ALIGNMENT-1))
heap_start = (heap_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
heap_size = BSP_Configuration.work_space_start - (void *)&end;
heap_size &= 0xfffffff0; /* keep it as a multiple of 16 bytes */
RTEMS_Malloc_Initialize((void *) heap_start, heap_size, 0);
/*
* Init the RTEMS libio facility to provide UNIX-like system
* calls for use by newlib (ie: provide __rtems_open, __rtems_close, etc)
* Uses malloc() to get area for the iops, so must be after malloc init
*/
rtems_libio_init();
/*
* Set up for the libc handling.
*/
if (BSP_Configuration.ticks_per_timeslice > 0)
libc_init(1); /* reentrant if possible */
else
libc_init(0); /* non-reentrant */
}
/*
* bsp_pretasking_hook
*
* BSP pretasking hook. Called just before drivers are initialized.
* Used to setup libc and install any BSP extensions.
*/
void bsp_pretasking_hook(void)
{
bsp_libc_init();
#if SIMSPARC_FAST_IDLE
/*
* Install the fast idle task switch extension
*
* On MP systems, might not want to do this; it confuses at least
* one test (mp06) on the PA-RISC simulator
*/
#if 0
if (BSP_Configuration.User_multiprocessing_table == 0)
#endif
{
rtems_extensions_table fast_idle_extension;
rtems_id extension_id;
rtems_status_code rc;
memset(&fast_idle_extension, 0, sizeof(fast_idle_extension));
fast_idle_extension.thread_switch = fast_idle_switch_hook;
rc = rtems_extension_create(
rtems_build_name('F', 'D', 'L', 'E'),
&fast_idle_extension,
&extension_id
);
if (rc != RTEMS_SUCCESSFUL)
rtems_fatal_error_occurred(rc);
}
#endif
#ifdef STACK_CHECKER_ON
/*
* Initialize the stack bounds checker
* We can either turn it on here or from the app.
*/
Stack_check_Initialize();
#endif
#ifdef RTEMS_DEBUG
rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
#endif
}
/*
* Use the shared bsp_postdriver_hook() implementation
*/
void bsp_postdriver_hook(void);
/*
* bsp_start
*
* This routine does the bulk of the system initialization.
*/
void bsp_start( void )
{
unsigned char *work_space_start;
/* Check if MEC is initialised */
if (!(ERC32_MEC.Control & 0xfe080000)) {
/*
* DISABLE THE HARDWARE WATCHDOG!!!
*/
ERC32_MEC.Watchdog_Trap_Door_Set = 0; /* value is irrelevant */
/*
* Reduce the number of wait states to 0 for all memory areas.
*/
ERC32_MEC.Wait_State_Configuration = 0;
}
/*
* Set up our hooks
* Make sure libc_init is done before drivers initialized so that
* they can use atexit()
*/
Cpu_table.pretasking_hook = bsp_pretasking_hook; /* init libc, etc. */
Cpu_table.predriver_hook = NULL; /* bsp_spurious_initialize;*/
Cpu_table.postdriver_hook = bsp_postdriver_hook;
Cpu_table.idle_task = NULL; /* do not override system IDLE task */
/*
* SIS does zero out memory BUT only when IT begins execution. Thus
* if we want to have a clean slate in the workspace each time we
* begin execution of OUR application, then we must zero the workspace.
*/
Cpu_table.do_zero_of_workspace = TRUE;
/*
* This should be enough interrupt stack.
*/
Cpu_table.interrupt_stack_size = (24 * 1024);
/*
* SIS does not support MP configurations so there is really no way
* to check this out.
*/
Cpu_table.extra_mpci_receive_server_stack = 0;
/*
* Copy the table and allocate memory for the RTEMS Workspace
*/
BSP_Configuration = Configuration;
#if defined(RTEMS_POSIX_API)
BSP_Configuration.work_space_size *= 3;
#endif
work_space_start =
(unsigned char *)rdb_start - BSP_Configuration.work_space_size;
if ( work_space_start <= (unsigned char *)&end ) {
DEBUG_puts( "bspstart: Not enough RAM!!!\n" );
BSP_fatal_return();
}
BSP_Configuration.work_space_start = work_space_start;
/*
* Account for the console's resources
*/
console_reserve_resources( &BSP_Configuration );
#if SIMSPARC_FAST_IDLE
/*
* Add 1 extension for fast idle
*/
BSP_Configuration.maximum_extensions++;
#endif
/*
* Add 1 extension for MPCI_fatal
*/
if (BSP_Configuration.User_multiprocessing_table)
BSP_Configuration.maximum_extensions++;
/*
* Set the "clicks per tick" for the simulator
* used by XXX/clock/clock.c to schedule interrupts
*/
CPU_SPARC_CLICKS_PER_TICK = BSP_Configuration.microseconds_per_tick;
/*
* Initialize RTEMS. main() will finish it up and start multitasking.
*/
rtems_libio_config( &BSP_Configuration, BSP_LIBIO_MAX_FDS );
}
