blob: 09d4fab9b421e8f6e55eeb19ba4404d930504ccd (
plain) (
tree)
|
|
/* bspstart.c
*
* This set of routines starts the application. It includes application,
* board, and monitor specific initialization and configuration.
* The generic CPU dependent initialization has been performed
* before this routine is invoked.
*
* COPYRIGHT (c) 1989-2007.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*
* Modifications for MBX860:
* Copyright (c) 1999, National Research Council of Canada
*/
#include <bsp.h>
#include <bsp/irq.h>
#include <rtems/bspIo.h>
#include <libcpu/cpuIdent.h>
#include <libcpu/spr.h>
#include <rtems/powerpc/powerpc.h>
SPR_RW(SPRG1)
int bsp_interrupt_initialize(void);
/*
* Driver configuration parameters
*/
uint32_t bsp_clicks_per_usec;
uint32_t bsp_clock_speed;
uint32_t bsp_serial_per_sec; /* Serial clocks per second */
bool bsp_serial_external_clock;
bool bsp_serial_xon_xoff;
bool bsp_serial_cts_rts;
uint32_t bsp_serial_rate;
uint32_t bsp_timer_average_overhead; /* Average overhead of timer in ticks */
uint32_t bsp_timer_least_valid; /* Least valid number from timer */
bool bsp_timer_internal_clock; /* TRUE, when timer runs with CPU clk */
extern char IntrStack_start [];
extern char intrStack [];
void BSP_panic(char *s)
{
printk("%s PANIC %s\n",_RTEMS_version, s);
__asm__ __volatile ("sc");
}
void _BSP_Fatal_error(unsigned int v)
{
printk("%s PANIC ERROR %x\n",_RTEMS_version, v);
__asm__ __volatile ("sc");
}
/*
* bsp_start()
*
* Board-specific initialization code. Called from the generic boot_card()
* function defined in rtems/c/src/lib/libbsp/shared/main.c. That function
* does some of the board independent initialization. It is called from the
* MBX8xx entry point _start() defined in
* rtems/c/src/lib/libbsp/powerpc/mbx8xx/startup/start.S
*
* _start() has set up a stack, has zeroed the .bss section, has turned off
* interrupts, and placed the processor in the supervisor mode. boot_card()
* has left the processor in that state when bsp_start() was called.
*
* RUNS WITH ADDRESS TRANSLATION AND CACHING TURNED OFF!
* ASSUMES THAT THE VIRTUAL ADDRESSES WILL BE IDENTICAL TO THE PHYSICAL
* ADDRESSES. Software-controlled address translation would be required
* otherwise.
*
* Input parameters: NONE
*
* Output parameters: NONE
*
* Return values: NONE
*/
void bsp_start(void)
{
ppc_cpu_id_t myCpu;
ppc_cpu_revision_t myCpuRevision;
/*
* Get CPU identification dynamically. Note that the get_ppc_cpu_type() function
* store the result in global variables so that it can be used latter...
*/
myCpu = get_ppc_cpu_type();
myCpuRevision = get_ppc_cpu_revision();
mmu_init();
/*
* Enable instruction and data caches. Do not force writethrough mode.
*/
#if NVRAM_CONFIGURE == 1
if ( nvram->cache_mode & 0x02 )
rtems_cache_enable_instruction();
if ( nvram->cache_mode & 0x01 )
rtems_cache_enable_data();
#else
#if BSP_INSTRUCTION_CACHE_ENABLED
rtems_cache_enable_instruction();
#endif
#if BSP_DATA_CACHE_ENABLED
rtems_cache_enable_data();
#endif
#endif
/* Initialize exception handler */
ppc_exc_initialize(
PPC_INTERRUPT_DISABLE_MASK_DEFAULT,
(uintptr_t) IntrStack_start,
(uintptr_t) intrStack - (uintptr_t) IntrStack_start
);
/* Initalize interrupt support */
bsp_interrupt_initialize();
/*
* initialize the device driver parameters
*/
#if ( defined(mbx860_001b) || \
defined(mbx860_002b) || \
defined(mbx860_003b) || \
defined(mbx860_003b) || \
defined(mbx860_004b) || \
defined(mbx860_005b) || \
defined(mbx860_006b) || \
defined(mbx821_001b) || \
defined(mbx821_002b) || \
defined(mbx821_003b) || \
defined(mbx821_004b) || \
defined(mbx821_005b) || \
defined(mbx821_006b))
bsp_clicks_per_usec = 0; /* for 32768Hz extclk */
#else
bsp_clicks_per_usec = 1; /* for 4MHz extclk */
#endif
bsp_serial_per_sec = 10000000;
bsp_serial_external_clock = true;
bsp_serial_xon_xoff = false;
bsp_serial_cts_rts = true;
bsp_serial_rate = 9600;
#if ( defined(mbx821_001) || defined(mbx821_001b) || defined(mbx860_001b) )
bsp_clock_speed = 50000000;
bsp_timer_average_overhead = 3;
bsp_timer_least_valid = 3;
#else
bsp_clock_speed = 40000000;
bsp_timer_average_overhead = 3;
bsp_timer_least_valid = 3;
#endif
m8xx.scc2.sccm=0;
m8xx.scc2p.rbase=0;
m8xx.scc2p.tbase=0;
m8xx_cp_execute_cmd( M8xx_CR_OP_STOP_TX | M8xx_CR_CHAN_SCC2 );
#ifdef SHOW_MORE_INIT_SETTINGS
printk("Exit from bspstart\n");
#endif
}
|