|
|
/**
* @file
*
* MIPS Mongoose-V specific information
*/
/*
* COPYRIGHT (c) 1989-2012.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#ifndef __MONGOOSEV_h
#define __MONGOOSEV_h
/*
* Macros to assist in accessing memory mapped Mongoose registers
*/
#define MONGOOSEV_READ( _base ) \
( *((volatile uint32_t*)(_base)) )
#define MONGOOSEV_WRITE( _base, _value ) \
( *((volatile uint32_t*)(_base)) = (_value) )
#define MONGOOSEV_READ_REGISTER( _base, _register ) \
( *((volatile uint32_t*)((_base) + (_register))) )
#define MONGOOSEV_WRITE_REGISTER( _base, _register, _value ) \
( *((volatile uint32_t*)((_base) + (_register))) = (_value) )
/*
* Macros to read/write the Mongoose FPU control register.
*/
/*
* BIU and DRAM Registers
*/
#define MONGOOSEV_BIU_CACHE_CONFIGURATION_REGISTER 0xFFFE0130
#define MONGOOSEV_DRAM_CONFIGURATION_REGISTER 0xFFFE0120
#define MONGOOSEV_REFRESH_TIMER_INITIAL_COUNTER_REGISTER 0xFFFE0010
#define MONGOOSEV_WAIT_STATE_CONFIGURATION_REGISTER_BASE 0xFFFE0100
/*
* Peripheral Function Addresses
*
* NOTE: Status and Interrupt Cause use the same bits
*/
#define MONGOOSEV_PERIPHERAL_COMMAND_REGISTER 0xFFFE0180
#define MONGOOSEV_PERIPHERAL_STATUS_REGISTER 0xFFFE0184
#define MONGOOSEV_PERIPHERAL_FUNCTION_INTERRUPT_CAUSE_REGISTER 0xFFFE0188
#define MONGOOSEV_PERIPHERAL_FUNCTION_INTERRUPT_MASK_REGISTER 0xFFFE018C
#define MONGOOSEV_WATCHDOG 0xBE000000
/* UART Bits in Peripheral Command Register Bits (TX/RX tied together here) */
#define MONGOOSEV_UART_CMD_RESET_BOTH_PORTS 0x0001
#define MONGOOSEV_UART_CMD_LOOPBACK_CTSN 0x0002
#define MONGOOSEV_UART_CMD_LOOPBACK_RXTX 0x0004
#define MONGOOSEV_UART_CMD_RX_ENABLE 0x001
#define MONGOOSEV_UART_CMD_RX_DISABLE 0x000
#define MONGOOSEV_UART_CMD_TX_ENABLE 0x002
#define MONGOOSEV_UART_CMD_TX_DISABLE 0x000
#define MONGOOSEV_UART_CMD_TX_READY 0x004
#define MONGOOSEV_UART_CMD_PARITY_ENABLE 0x008
#define MONGOOSEV_UART_CMD_PARITY_DISABLE 0x000
#define MONGOOSEV_UART_CMD_PARITY_EVEN 0x010
#define MONGOOSEV_UART_CMD_PARITY_ODD 0x000
#define MONGOOSEV_UART0_CMD_SHIFT 5
#define MONGOOSEV_UART1_CMD_SHIFT 11
#define MONGOOSEV_UART_CMD_TX_ENABLE_0 \
(MONGOOSEV_UART_CMD_TX_ENABLE << MONGOOSEV_UART0_CMD_SHIFT)
#define MONGOOSEV_UART_CMD_RX_ENABLE_0 \
(MONGOOSEV_UART_CMD_RX_ENABLE << MONGOOSEV_UART0_CMD_SHIFT)
#define MONGOOSEV_UART_CMD_TX_READY_0 \
(MONGOOSEV_UART_CMD_TX_READY << MONGOOSEV_UART0_CMD_SHIFT)
#define MONGOOSEV_UART_CMD_PARITY_ENABLE_0 \
(MONGOOSEV_UART_CMD_PARITY_ENABLE << MONGOOSEV_UART0_CMD_SHIFT)
#define MONGOOSEV_UART_CMD_PARITY_DISABLE_0 \
(MONGOOSEV_UART_CMD_PARITY_DISABLE << MONGOOSEV_UART0_CMD_SHIFT)
#define MONGOOSEV_UART_CMD_PARITY_EVEN_0 \
(MONGOOSEV_UART_CMD_PARITY_EVEN << MONGOOSEV_UART0_CMD_SHIFT)
#define MONGOOSEV_UART_CMD_PARITY_ODD_0 \
(MONGOOSEV_UART_CMD_PARITY_ODD << MONGOOSEV_UART0_CMD_SHIFT)
#define MONGOOSEV_UART_CMD_TX_ENABLE_1 \
(MONGOOSEV_UART_CMD_TX_ENABLE << MONGOOSEV_UART1_CMD_SHIFT)
#define MONGOOSEV_UART_CMD_RX_ENABLE_1 \
(MONGOOSEV_UART_CMD_RX_ENABLE << MONGOOSEV_UART1_CMD_SHIFT)
#define MONGOOSEV_UART_CMD_TX_READY_1 \
(MONGOOSEV_UART_CMD_TX_READY << MONGOOSEV_UART1_CMD_SHIFT)
#define MONGOOSEV_UART_CMD_PARITY_ENABLE_1 \
(MONGOOSEV_UART_CMD_PARITY_ENABLE << MONGOOSEV_UART1_CMD_SHIFT)
#define MONGOOSEV_UART_CMD_PARITY_DISABLE_1 \
(MONGOOSEV_UART_CMD_PARITY_DISABLE << MONGOOSEV_UART1_CMD_SHIFT)
#define MONGOOSEV_UART_CMD_PARITY_EVEN_1 \
(MONGOOSEV_UART_CMD_PARITY_EVEN << MONGOOSEV_UART1_CMD_SHIFT)
#define MONGOOSEV_UART_CMD_PARITY_ODD_1 \
(MONGOOSEV_UART_CMD_PARITY_ODD << MONGOOSEV_UART1_CMD_SHIFT)
/* UART Bits in Peripheral Status and Interrupt Cause Register */
#define MONGOOSEV_UART_RX_FRAME_ERROR 0x0001
#define MONGOOSEV_UART_RX_OVERRUN_ERROR 0x0002
#define MONGOOSEV_UART_TX_EMPTY 0x0004
#define MONGOOSEV_UART_TX_READY 0x0008
#define MONGOOSEV_UART_RX_READY 0x0010
#define MONGOOSEV_UART_ALL_RX_STATUS_BITS 0x0013
#define MONGOOSEV_UART_ALL_STATUS_BITS 0x001F
/*
* The Peripheral Interrupt Status, Cause, and Mask registers have the
* same bit assignments although some revisions of the document have
* the Cause and Status registers incorrect.
*/
#define MONGOOSEV_UART0_IRQ_SHIFT 11
#define MONGOOSEV_UART1_IRQ_SHIFT 17
#define MONGOOSEV_UART_FRAME_ERROR_0 \
(MONGOOSEV_UART_FRAME_ERROR << MONGOOSEV_UART0_IRQ_SHIFT)
#define MONGOOSEV_UART_RX_OVERRUN_ERROR_0 \
(MONGOOSEV_UART_RX_OVERRUN_ERROR << MONGOOSEV_UART0_IRQ_SHIFT)
#define MONGOOSEV_UART_TX_EMPTY_0 \
(MONGOOSEV_UART_TX_EMPTY << MONGOOSEV_UART0_IRQ_SHIFT)
#define MONGOOSEV_UART_TX_READY_0 \
(MONGOOSEV_UART_TX_READY << MONGOOSEV_UART0_IRQ_SHIFT)
#define MONGOOSEV_UART_RX_READY_0 \
(MONGOOSEV_UART_RX_READY << MONGOOSEV_UART0_IRQ_SHIFT)
#define MONGOOSEV_UART_FRAME_ERROR_1 \
(MONGOOSEV_UART_FRAME_ERROR << MONGOOSEV_UART1_IRQ_SHIFT)
#define MONGOOSEV_UART_RX_OVERRUN_ERROR_1 \
(MONGOOSEV_UART_RX_OVERRUN_ERROR << MONGOOSEV_UART1_IRQ_SHIFT)
#define MONGOOSEV_UART_TX_EMPTY_1 \
(MONGOOSEV_UART_TX_EMPTY << MONGOOSEV_UART1_IRQ_SHIFT)
#define MONGOOSEV_UART_TX_READY_1 \
(MONGOOSEV_UART_TX_READY << MONGOOSEV_UART1_IRQ_SHIFT)
#define MONGOOSEV_UART_RX_READY_1 \
(MONGOOSEV_UART_RX_READY << MONGOOSEV_UART1_IRQ_SHIFT)
/*
* Bits in the Peripheral Interrupt Mask Register
*/
/*
** Interrupt Status/Cause/Mask register bits - from 31 to 0
*/
#define MONGOOSEV_EDAC_SERR_BIT 0x80000000
#define MONGOOSEV_EDAC_MERR_BIT 0x40000000
/* 29 - 24 reserved */
#define MONGOOSEV_MAVN_WRITE_ACCESS 0x00800000
#define MONGOOSEV_MAVN_READ_ACCESS 0x00400000
#define MONGOOSEV_UART_1_RX_READY 0x00200000
#define MONGOOSEV_UART_1_TX_READY 0x00100000
#define MONGOOSEV_UART_1_TX_EMPTY 0x00080000
#define MONGOOSEV_UART_1_RX_OVERRUN 0x00040000
#define MONGOOSEV_UART_1_FRAME_ERROR 0x00020000
#define MONGOOSEV_RESERVED_16 0x00010000
#define MONGOOSEV_UART_0_RX_READY 0x00008000
#define MONGOOSEV_UART_0_TX_READY 0x00004000
#define MONGOOSEV_UART_0_TX_EMPTY 0x00002000
#define MONGOOSEV_UART_0_RX_OVERRUN 0x00001000
#define MONGOOSEV_UART_0_FRAME_ERROR 0x00000800
#define MONGOOSEV_RESERVED_10 0x00000400
#define MONGOOSEV_EXTERN_INT_9 0x00000200
#define MONGOOSEV_EXTERN_INT_8 0x00000100
#define MONGOOSEV_EXTERN_INT_7 0x00000080
#define MONGOOSEV_EXTERN_INT_6 0x00000040
#define MONGOOSEV_EXTERN_INT_5 0x00000020
#define MONGOOSEV_EXTERN_INT_4 0x00000010
#define MONGOOSEV_EXTERN_INT_3 0x00000008
#define MONGOOSEV_EXTERN_INT_2 0x00000004
#define MONGOOSEV_EXTERN_INT_1 0x00000002
#define MONGOOSEV_EXTERN_INT_0 0x00000001
/*
** Peripheral Command bits (non-uart, those are defined above)
*/
#define MONGOOSEV_COMMAND_ENABLE_EDAC MONGOOSEV_EDAC_SERR_BIT
#define MONGOOSEV_COMMAND_OVERRIDE_EDAC MONGOOSEV_EDAC_MERR_BIT
/*
* EDAC Registers
*/
#define MONGOOSEV_EDAC_ERROR_ADDRESS_REGISTER 0xFFFE0190
#define MONGOOSEV_EDAC_PARITY_TEST_MODE_REGISTER 0xFFFE0194
/*
* MAVN Registers
*/
#define MONGOOSEV_MAVN_TEST_REGISTER 0xFFFE01B4
#define MONGOOSEV_MAVN_ACCESS_PRIVILEGE_REGISTER 0xFFFE01B8
#define MONGOOSEV_MAVN_ACCESS_VIOLATION_REGISTER 0xFFFE01BC
#define MONGOOSEV_MAVN_RANGE_0_REGISTER 0xFFFE01C0
#define MONGOOSEV_MAVN_RANGE_1_REGISTER 0xFFFE01C4
#define MONGOOSEV_MAVN_RANGE_2_REGISTER 0xFFFE01C8
#define MONGOOSEV_MAVN_RANGE_3_REGISTER 0xFFFE01CC
#define MONGOOSEV_MAVN_RANGE_4_REGISTER 0xFFFE01D0
#define MONGOOSEV_MAVN_RANGE_5_REGISTER 0xFFFE01D4
#define MONGOOSEV_MAVN_RANGE_6_REGISTER 0xFFFE01D8
#define MONGOOSEV_MAVN_RANGE_7_REGISTER 0xFFFE01DC
/*
* Timer Base Addresses, Offsets, and Values
*/
#define MONGOOSEV_TIMER1_BASE 0xFFFE0000
#define MONGOOSEV_TIMER2_BASE 0xFFFE0008
#define MONGOOSEV_TIMER_INITIAL_COUNTER_REGISTER 0
#define MONGOOSEV_TIMER_CONTROL_REGISTER 4
/* Timer Control Register Constants */
#define MONGOOSEV_TIMER_CONTROL_COUNTER_ENABLE 0x04
#define MONGOOSEV_TIMER_CONTROL_INTERRUPT_ENABLE 0x02
#define MONGOOSEV_TIMER_CONTROL_TIMEOUT 0x01
/*
* UART Base Addresses and Offsets
*
* Many bits in the peripheral command register are UART related
* and the bits are defined there.
*/
#define MONGOOSEV_UART0_BASE 0xFFFE01E8
#define MONGOOSEV_UART1_BASE 0xFFFE01F4
#define MONGOOSEV_RX_BUFFER 0
#define MONGOOSEV_TX_BUFFER 4
#define MONGOOSEV_BAUD_RATE 8
/*
* Status Register Bits
*/
#define SR_CUMASK 0xf0000000 /* coproc usable bits */
#define SR_CU3 0x80000000 /* Coprocessor 3 usable */
#define SR_CU2 0x40000000 /* Coprocessor 2 usable */
#define SR_CU1 0x20000000 /* Coprocessor 1 usable */
#define SR_CU0 0x10000000 /* Coprocessor 0 usable */
#define SR_BEV 0x00400000 /* use boot exception vectors */
#define SR_TS 0x00200000 /* TLB shutdown */
#define SR_PE 0x00100000 /* cache parity error */
#define SR_CM 0x00080000 /* cache miss */
#define SR_PZ 0x00040000 /* cache parity zero */
#define SR_SWC 0x00020000 /* swap cache */
#define SR_ISC 0x00010000 /* Isolate data cache */
#define SR_IMASK 0x0000ff00 /* Interrupt mask */
#define SR_IMASK8 0x00000000 /* mask level 8 */
#define SR_IMASK7 0x00008000 /* mask level 7 */
#define SR_IMASK6 0x0000c000 /* mask level 6 */
#define SR_IMASK5 0x0000e000 /* mask level 5 */
#define SR_IMASK4 0x0000f000 /* mask level 4 */
#define SR_IMASK3 0x0000f800 /* mask level 3 */
#define SR_IMASK2 0x0000fc00 /* mask level 2 */
#define SR_IMASK1 0x0000fe00 /* mask level 1 */
#define SR_IMASK0 0x0000ff00 /* mask level 0 */
#define SR_IBIT8 0x00008000 /* bit level 8 */
#define SR_IBIT7 0x00004000 /* bit level 7 */
#define SR_IBIT6 0x00002000 /* bit level 6 */
#define SR_IBIT5 0x00001000 /* bit level 5 */
#define SR_IBIT4 0x00000800 /* bit level 4 */
#define SR_IBIT3 0x00000400 /* bit level 3 */
#define SR_IBIT2 0x00000200 /* bit level 2 */
#define SR_IBIT1 0x00000100 /* bit level 1 */
#define SR_KUO 0x00000020 /* old kernel/user, 0 => k, 1 => u */
#define SR_IEO 0x00000010 /* old interrupt enable, 1 => enable */
#define SR_KUP 0x00000008 /* prev kernel/user, 0 => k, 1 => u */
#define SR_IEP 0x00000004 /* prev interrupt enable, 1 => enable */
#define SR_KUC 0x00000002 /* cur kernel/user, 0 => k, 1 => u */
#define SR_IEC 0x00000001 /* cur interrupt enable, 1 => enable */
#define SR_KUMSK (SR_KUO|SR_IEO|SR_KUP|SR_IEP|SR_KUC|SR_IEC)
#define SR_IMASKSHIFT 8
#define MONGOOSEV_IC_SIZE 0x1000 /* instruction cache = 4Kbytes */
#define MONGOOSEV_DC_SIZE 0x800 /* data cache 2Kbytes */
#endif
|
