blob: 9584b24eb7d20c6acabd1beb2d08a4dbe1995038 (
plain) (
tree)
|
|
/* bsp.h
*
* This include file contains all MVME136 board IO definitions.
*
* COPYRIGHT (c) 1989-1999.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.OARcorp.com/rtems/license.html.
*
* $Id$
*/
#ifndef __MVME136_h
#define __MVME136_h
#ifdef __cplusplus
extern "C" {
#endif
#include <rtems.h>
#include <clockdrv.h>
#include <console.h>
#include <iosupp.h>
/*
* confdefs.h overrides for this BSP:
* - number of termios serial ports (defaults to 1)
* - Interrupt stack space is not minimum if defined.
*/
/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
#define CONFIGURE_INTERRUPT_STACK_MEMORY (4 * 1024)
/*
* Define the time limits for RTEMS Test Suite test durations.
* Long test and short test duration limits are provided. These
* values are in seconds and need to be converted to ticks for the
* application.
*
*/
#define MAX_LONG_TEST_DURATION 300 /* 5 minutes = 300 seconds */
#define MAX_SHORT_TEST_DURATION 3 /* 3 seconds */
/*
* Define the interrupt mechanism for Time Test 27
*
* NOTE: Use the MPCSR vector for the MVME136
*/
#define MUST_WAIT_FOR_INTERRUPT 0
#define Install_tm27_vector( handler ) set_vector( (handler), 75, 1 )
#define Cause_tm27_intr() (*(volatile rtems_unsigned8 *)0xfffb006b) = 0x80
#define Clear_tm27_intr() (*(volatile rtems_unsigned8 *)0xfffb006b) = 0x00
#define Lower_tm27_intr()
/*
* Simple spin delay in microsecond units for device drivers.
* This is very dependent on the clock speed of the target.
*/
#define delay( microseconds ) \
{ register rtems_unsigned32 _delay=(microseconds); \
register rtems_unsigned32 _tmp=123; \
asm volatile( "0: \
nbcd %0 ; \
nbcd %0 ; \
dbf %1,0b" \
: "=d" (_tmp), "=d" (_delay) \
: "0" (_tmp), "1" (_delay) ); \
}
/* Constants */
#define RAM_START 0
#define RAM_END 0x100000
#define M681ADDR 0xfffb0040 /* address of the M68681 chip */
#define RXRDYB 0x01 /* status reg recv ready mask */
#define TXRDYB 0x04 /* status reg trans ready mask */
#define PARITYERR 0x20 /* status reg parity error mask */
#define FRAMEERR 0x40 /* status reg frame error mask */
#define FOREVER 1 /* infinite loop */
/* Structures */
struct r_m681_info {
char fill1[ 5 ]; /* channel A regs ( not used ) */
char isr; /* interrupt status reg */
char fill2[ 2 ]; /* counter regs (not used) */
char mr1mr2b; /* MR1B and MR2B regs */
char srb; /* status reg channel B */
char fill3; /* do not access */
char rbb; /* receive buffer channel B */
char ivr; /* interrupt vector register */
};
struct w_m681_info {
char fill1[ 4 ]; /* channel A regs (not used) */
char acr; /* auxillary control reg */
char imr; /* interrupt mask reg */
char fill2[ 2 ]; /* counter regs (not used) */
char mr1mr2b; /* MR1B and MR2B regs */
char csrb; /* clock select reg */
char crb; /* command reg */
char tbb; /* transmit buffer channel B */
char ivr; /* interrupt vector register */
};
#ifdef M136_INIT
#undef EXTERN
#define EXTERN
#else
#undef EXTERN
#define EXTERN extern
#endif
/* miscellaneous stuff assumed to exist */
extern rtems_configuration_table BSP_Configuration;
/* M68681 DUART chip register variables */
EXTERN volatile struct r_m681_info *_Read_m681; /* M68681 read registers */
EXTERN volatile struct w_m681_info *_Write_m681; /* M68681 write registers */
extern m68k_isr_entry M68Kvec[]; /* vector table address */
/*
* Device Driver Table Entries
*/
/*
* NOTE: Use the standard Console driver entry
*/
/*
* NOTE: Use the standard Clock driver entry
*/
/* functions */
void bsp_cleanup( void );
m68k_isr_entry set_vector(
rtems_isr_entry handler,
rtems_vector_number vector,
int type
);
#ifdef __cplusplus
}
#endif
#endif
/* end of include file */
|
