blob: fbb787dbb3f1fcfefd31c9fec5fbfc4ac88182d8 (
plain) (
tree)
|
|
/* bsp_start()
*
* This routine starts the application. It includes application,
* board, and monitor specific initialization and configuration.
* The generic CPU dependent initialization has been performed
* before this routine is invoked.
*
* INPUT: NONE
*
* OUTPUT: NONE
*
* COPYRIGHT (c) 1989-1998.
* On-Line Applications Research Corporation (OAR).
* Copyright assigned to U.S. Government, 1994.
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.OARcorp.com/rtems/license.html.
*
* $Id$
*/
#include <bsp.h>
#include <rtems/libio.h>
#include <libcsupport.h>
#include <string.h>
/*
* The original table from the application and our copy of it with
* some changes.
*/
extern rtems_configuration_table Configuration;
rtems_configuration_table BSP_Configuration;
rtems_cpu_table Cpu_table;
char *rtems_progname;
/* Initialize whatever libc we are using
* called from postdriver hook
*/
void bsp_libc_init()
{
extern int end;
rtems_unsigned32 heap_start;
heap_start = (rtems_unsigned32) &end;
if (heap_start & (CPU_ALIGNMENT-1))
heap_start = (heap_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
/*
* The last parameter to RTEMS_Malloc_Initialize is the "chunk"
* size which a multiple of will be requested on each sbrk()
* call by malloc(). A value of 0 indicates that sbrk() should
* not be called to extend the heap.
*/
RTEMS_Malloc_Initialize((void *) heap_start, 64 * 1024, 0);
/*
* Init the RTEMS libio facility to provide UNIX-like system
* calls for use by newlib (ie: provide __rtems_open, __rtems_close, etc)
* Uses malloc() to get area for the iops, so must be after malloc init
*/
rtems_libio_init();
/*
* Set up for the libc handling.
*/
if (BSP_Configuration.ticks_per_timeslice > 0)
libc_init(1); /* reentrant if possible */
else
libc_init(0); /* non-reentrant */
}
/*
* Function: bsp_pretasking_hook
* Created: 95/03/10
*
* Description:
* BSP pretasking hook. Called just before drivers are initialized.
* Used to setup libc and install any BSP extensions.
*
* NOTES:
* Must not use libc (to do io) from here, since drivers are
* not yet initialized.
*
*/
void
bsp_pretasking_hook(void)
{
bsp_libc_init();
#ifdef RTEMS_DEBUG
rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
#endif
}
/*
* Use the shared bsp_postdriver_hook() implementation
*/
void bsp_postdriver_hook(void);
void bsp_start( void )
{
/*
* Allocate the memory for the RTEMS Work Space. This can come from
* a variety of places: hard coded address, malloc'ed from outside
* RTEMS world (e.g. simulator or primitive memory manager), or (as
* typically done by stock BSPs) by subtracting the required amount
* of work space from the last physical address on the CPU board.
*/
#if 0
Cpu_table.interrupt_vector_table = (mc68000_isr *) 0/*&M68Kvec*/;
#endif
/*
* Copy the Configuration Table .. so we can change it
*/
BSP_Configuration = Configuration;
/*
* Tell libio how many fd's we want and allow it to tweak config
*/
rtems_libio_config(&BSP_Configuration, BSP_LIBIO_MAX_FDS);
/*
* Need to "allocate" the memory for the RTEMS Workspace and
* tell the RTEMS configuration where it is. This memory is
* not malloc'ed. It is just "pulled from the air".
*/
BSP_Configuration.work_space_start = (void *)
(RAM_END - BSP_Configuration.work_space_size);
/*
* initialize the CPU table for this BSP
*/
/*
* we do not use the pretasking_hook
*/
Cpu_table.pretasking_hook = bsp_pretasking_hook; /* init libc, etc. */
Cpu_table.predriver_hook = NULL;
Cpu_table.postdriver_hook = bsp_postdriver_hook;
Cpu_table.idle_task = NULL; /* do not override system IDLE task */
Cpu_table.do_zero_of_workspace = TRUE;
Cpu_table.interrupt_stack_size = 4096;
Cpu_table.extra_mpci_receive_server_stack = 0;
/*
* Don't forget the other CPU Table entries.
*/
}
|
