blob: ec1ca0b6f8d933652893e95ae0dddf9b0f817bbb (
plain) (
tree)
|
|
/* void Shm_Get_configuration( localnode, &shmcfg )
*
* This routine initializes, if necessary, and returns a pointer
* to the Shared Memory Configuration Table for the HP PA-RISC
* simulator.
*
* INPUT PARAMETERS:
* localnode - local node number
* shmcfg - address of pointer to SHM Config Table
*
* OUTPUT PARAMETERS:
* *shmcfg - pointer to SHM Config Table
*
* NOTES: The MP interrupt used is the Runway bus' ability to directly
* address the control registers of up to four CPUs and cause
* interrupts on them.
*
* The following table illustrates the configuration limitations:
*
* BUS MAX
* MODE ENDIAN NODES
* ========= ====== =======
* POLLED BIG 2+
* INTERRUPT BIG 2..4 (on Runway)
*
* COPYRIGHT (c) 1989-1999.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*
* $Id$
*/
#include <bsp.h>
#include <shm_driver.h>
#define INTERRUPT 0 /* can be interrupt or polling */
#define POLLING 1
#define HPPA_RUNWAY_PROC_HPA_BASE ((void *) 0xFFFA0000)
/* given a processor number, where is its HPA? */
#define HPPA_RUNWAY_HPA(cpu) \
((rtems_unsigned32) (HPPA_RUNWAY_PROC_HPA_BASE + ((cpu) * 0x2000)))
#define HPPA_RUNWAY_REG_IO_EIR_OFFSET 0x000
shm_config_table BSP_shm_cfgtbl;
extern void Shm_Cause_interrupt_pxfl( rtems_unsigned32 node );
void Shm_Get_configuration(
rtems_unsigned32 localnode,
shm_config_table **shmcfg
)
{
BSP_shm_cfgtbl.base = (vol_u32 *) 0x44000000;
BSP_shm_cfgtbl.length = 16 * KILOBYTE;
BSP_shm_cfgtbl.format = SHM_BIG;
BSP_shm_cfgtbl.cause_intr = Shm_Cause_interrupt_pxfl;
#ifdef NEUTRAL_BIG
BSP_shm_cfgtbl.convert = NULL_CONVERT;
#else
BSP_shm_cfgtbl.convert = CPU_swap_u32;
#endif
#if ( POLLING == 1 )
BSP_shm_cfgtbl.poll_intr = POLLED_MODE;
BSP_shm_cfgtbl.Intr.address = NO_INTERRUPT;
BSP_shm_cfgtbl.Intr.value = NO_INTERRUPT;
BSP_shm_cfgtbl.Intr.length = NO_INTERRUPT;
#else
BSP_shm_cfgtbl.poll_intr = INTR_MODE;
BSP_shm_cfgtbl.Intr.address =
(vol_u32 *) (HPPA_RUNWAY_HPA( localnode - 1) +
HPPA_RUNWAY_REG_IO_EIR_OFFSET);
BSP_shm_cfgtbl.Intr.value = HPPA_INTERRUPT_EXTERNAL_MPCI;
BSP_shm_cfgtbl.Intr.length = LONG;
#endif
*shmcfg = &BSP_shm_cfgtbl;
}
|
