# $KAME: racoon.conf.in,v 1.18 2001/08/16 06:33:40 itojun Exp $ # "path" affects "include" directives. "path" must be specified before any # "include" directive with relative file path. # you can overwrite "path" directive afterwards, however, doing so may add # more confusion. path include "@sysconfdir_x@/racoon"; #include "remote.conf"; # the file should contain key ID/key pairs, for pre-shared key authentication. path pre_shared_key "@sysconfdir_x@/racoon/psk.txt"; # racoon will look for certificate file in the directory, # if the certificate/certificate request payload is received. path certificate "@sysconfdir_x@/cert"; # "log" specifies logging level. It is followed by either "notify", "debug" # or "debug2". #log debug; # "padding" defines some padding parameters. You should not touch these. padding { maximum_length 20; # maximum padding length. randomize off; # enable randomize length. strict_check off; # enable strict check. exclusive_tail off; # extract last one octet. } # if no listen directive is specified, racoon will listen on all # available interface addresses. listen { #isakmp ::1 [7000]; #isakmp 202.249.11.124 [500]; #admin [7002]; # administrative port for racoonctl. #strict_address; # requires that all addresses must be bound. } # Specify various default timers. timer { # These value can be changed per remote node. counter 5; # maximum trying count to send. interval 20 sec; # maximum interval to resend. persend 1; # the number of packets per send. # maximum time to wait for completing each phase. phase1 30 sec; phase2 15 sec; } remote anonymous { exchange_mode main,aggressive; doi ipsec_doi; situation identity_only; my_identifier asn1dn; certificate_type x509 "my.cert.pem" "my.key.pem"; nonce_size 16; initial_contact on; proposal_check strict; # obey, strict, or claim proposal { encryption_algorithm 3des; hash_algorithm sha1; authentication_method rsasig; dh_group 2; } } remote ::1 [8000] { #exchange_mode main,aggressive; exchange_mode aggressive,main; doi ipsec_doi; situation identity_only; my_identifier user_fqdn "sakane@kame.net"; peers_identifier user_fqdn "sakane@kame.net"; #certificate_type x509 "mycert" "mypriv"; nonce_size 16; lifetime time 1 min; # sec,min,hour proposal { encryption_algorithm 3des; hash_algorithm sha1; authentication_method pre_shared_key; dh_group 2; } } sainfo anonymous { pfs_group 2; encryption_algorithm 3des; authentication_algorithm hmac_sha1; compression_algorithm deflate; } sainfo address 203.178.141.209 any address 203.178.141.218 any { pfs_group 2; lifetime time 30 sec; encryption_algorithm des; authentication_algorithm hmac_md5; compression_algorithm deflate; } sainfo address ::1 icmp6 address ::1 icmp6 { pfs_group 3; lifetime time 60 sec; encryption_algorithm 3des, blowfish, aes; authentication_algorithm hmac_sha1, hmac_md5; compression_algorithm deflate; }