/*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211__IEEE80211_H_ #define _NET80211__IEEE80211_H_ /* * 802.11 implementation definitions. * * NB: this file is used by applications. */ /* * PHY type; mostly used to identify FH phys. */ enum ieee80211_phytype { IEEE80211_T_DS, /* direct sequence spread spectrum */ IEEE80211_T_FH, /* frequency hopping */ IEEE80211_T_OFDM, /* frequency division multiplexing */ IEEE80211_T_TURBO, /* high rate OFDM, aka turbo mode */ IEEE80211_T_HT, /* high throughput */ IEEE80211_T_OFDM_HALF, /* 1/2 rate OFDM */ IEEE80211_T_OFDM_QUARTER, /* 1/4 rate OFDM */ IEEE80211_T_VHT, /* VHT PHY */ }; #define IEEE80211_T_CCK IEEE80211_T_DS /* more common nomenclature */ /* * PHY mode; this is not really a mode as multi-mode devices * have multiple PHY's. Mode is mostly used as a shorthand * for constraining which channels to consider in setting up * operation. Modes used to be used more extensively when * channels were identified as IEEE channel numbers. */ enum ieee80211_phymode { IEEE80211_MODE_AUTO = 0, /* autoselect */ IEEE80211_MODE_11A = 1, /* 5GHz, OFDM */ IEEE80211_MODE_11B = 2, /* 2GHz, CCK */ IEEE80211_MODE_11G = 3, /* 2GHz, OFDM */ IEEE80211_MODE_FH = 4, /* 2GHz, GFSK */ IEEE80211_MODE_TURBO_A = 5, /* 5GHz, OFDM, 2x clock */ IEEE80211_MODE_TURBO_G = 6, /* 2GHz, OFDM, 2x clock */ IEEE80211_MODE_STURBO_A = 7, /* 5GHz, OFDM, 2x clock, static */ IEEE80211_MODE_11NA = 8, /* 5GHz, w/ HT */ IEEE80211_MODE_11NG = 9, /* 2GHz, w/ HT */ IEEE80211_MODE_HALF = 10, /* OFDM, 1/2x clock */ IEEE80211_MODE_QUARTER = 11, /* OFDM, 1/4x clock */ IEEE80211_MODE_VHT_2GHZ = 12, /* 2GHz, VHT */ IEEE80211_MODE_VHT_5GHZ = 13, /* 5GHz, VHT */ }; #define IEEE80211_MODE_MAX (IEEE80211_MODE_VHT_5GHZ+1) #define IEEE80211_MODE_BYTES howmany(IEEE80211_MODE_MAX, NBBY) /* * Operating mode. Devices do not necessarily support * all modes; they indicate which are supported in their * capabilities. */ enum ieee80211_opmode { IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */ IEEE80211_M_STA = 1, /* infrastructure station */ IEEE80211_M_WDS = 2, /* WDS link */ IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */ IEEE80211_M_HOSTAP = 4, /* Software Access Point */ IEEE80211_M_MONITOR = 5, /* Monitor mode */ IEEE80211_M_MBSS = 6, /* MBSS (Mesh Point) link */ }; #define IEEE80211_OPMODE_MAX (IEEE80211_M_MBSS+1) /* * 802.11g/802.11n protection mode. */ enum ieee80211_protmode { IEEE80211_PROT_NONE = 0, /* no protection */ IEEE80211_PROT_CTSONLY = 1, /* CTS to self */ IEEE80211_PROT_RTSCTS = 2, /* RTS-CTS */ }; /* * Authentication mode. The open and shared key authentication * modes are implemented within the 802.11 layer. 802.1x and * WPA/802.11i are implemented in user mode by setting the * 802.11 layer into IEEE80211_AUTH_8021X and deferring * authentication to user space programs. */ enum ieee80211_authmode { IEEE80211_AUTH_NONE = 0, IEEE80211_AUTH_OPEN = 1, /* open */ IEEE80211_AUTH_SHARED = 2, /* shared-key */ IEEE80211_AUTH_8021X = 3, /* 802.1x */ IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */ /* NB: these are used only for ioctls */ IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x/PSK */ }; /* * Roaming mode is effectively who controls the operation * of the 802.11 state machine when operating as a station. * State transitions are controlled either by the driver * (typically when management frames are processed by the * hardware/firmware), the host (auto/normal operation of * the 802.11 layer), or explicitly through ioctl requests * when applications like wpa_supplicant want control. */ enum ieee80211_roamingmode { IEEE80211_ROAMING_DEVICE= 0, /* driver/hardware control */ IEEE80211_ROAMING_AUTO = 1, /* 802.11 layer control */ IEEE80211_ROAMING_MANUAL= 2, /* application control */ }; /* * Channels are specified by frequency and attributes. */ struct ieee80211_channel { uint32_t ic_flags; /* see below */ uint16_t ic_freq; /* primary centre frequency in MHz */ uint8_t ic_ieee; /* IEEE channel number */ int8_t ic_maxregpower; /* maximum regulatory tx power in dBm */ int8_t ic_maxpower; /* maximum tx power in .5 dBm */ int8_t ic_minpower; /* minimum tx power in .5 dBm */ uint8_t ic_state; /* dynamic state */ uint8_t ic_extieee; /* HT40 extension channel number */ int8_t ic_maxantgain; /* maximum antenna gain in .5 dBm */ uint8_t ic_pad; uint16_t ic_devdata; /* opaque device/driver data */ uint8_t ic_vht_ch_freq1; /* VHT primary freq1 IEEE value */ uint8_t ic_vht_ch_freq2; /* VHT secondary 80MHz freq2 IEEE value */ uint16_t ic_freq2; /* VHT secondary 80MHz freq2 MHz */ }; /* * Note: for VHT operation we will need significantly more than * IEEE80211_CHAN_MAX channels because of the combinations of * VHT20, VHT40, VHT80, VHT80+80 and VHT160. */ #define IEEE80211_CHAN_MAX 1024 #define IEEE80211_CHAN_BYTES howmany(IEEE80211_CHAN_MAX, NBBY) #define IEEE80211_CHAN_ANY 0xffff /* token for ``any channel'' */ #define IEEE80211_CHAN_ANYC \ ((struct ieee80211_channel *) IEEE80211_CHAN_ANY) /* channel attributes */ #define IEEE80211_CHAN_PRIV0 0x00000001 /* driver private bit 0 */ #define IEEE80211_CHAN_PRIV1 0x00000002 /* driver private bit 1 */ #define IEEE80211_CHAN_PRIV2 0x00000004 /* driver private bit 2 */ #define IEEE80211_CHAN_PRIV3 0x00000008 /* driver private bit 3 */ #define IEEE80211_CHAN_TURBO 0x00000010 /* Turbo channel */ #define IEEE80211_CHAN_CCK 0x00000020 /* CCK channel */ #define IEEE80211_CHAN_OFDM 0x00000040 /* OFDM channel */ #define IEEE80211_CHAN_2GHZ 0x00000080 /* 2 GHz spectrum channel. */ #define IEEE80211_CHAN_5GHZ 0x00000100 /* 5 GHz spectrum channel */ #define IEEE80211_CHAN_PASSIVE 0x00000200 /* Only passive scan allowed */ #define IEEE80211_CHAN_DYN 0x00000400 /* Dynamic CCK-OFDM channel */ #define IEEE80211_CHAN_GFSK 0x00000800 /* GFSK channel (FHSS PHY) */ #define IEEE80211_CHAN_GSM 0x00001000 /* 900 MHz spectrum channel */ #define IEEE80211_CHAN_STURBO 0x00002000 /* 11a static turbo channel only */ #define IEEE80211_CHAN_HALF 0x00004000 /* Half rate channel */ #define IEEE80211_CHAN_QUARTER 0x00008000 /* Quarter rate channel */ #define IEEE80211_CHAN_HT20 0x00010000 /* HT 20 channel */ #define IEEE80211_CHAN_HT40U 0x00020000 /* HT 40 channel w/ ext above */ #define IEEE80211_CHAN_HT40D 0x00040000 /* HT 40 channel w/ ext below */ #define IEEE80211_CHAN_DFS 0x00080000 /* DFS required */ #define IEEE80211_CHAN_4MSXMIT 0x00100000 /* 4ms limit on frame length */ #define IEEE80211_CHAN_NOADHOC 0x00200000 /* adhoc mode not allowed */ #define IEEE80211_CHAN_NOHOSTAP 0x00400000 /* hostap mode not allowed */ #define IEEE80211_CHAN_11D 0x00800000 /* 802.11d required */ #define IEEE80211_CHAN_VHT20 0x01000000 /* VHT20 channel */ #define IEEE80211_CHAN_VHT40U 0x02000000 /* VHT40 channel, ext above */ #define IEEE80211_CHAN_VHT40D 0x04000000 /* VHT40 channel, ext below */ #define IEEE80211_CHAN_VHT80 0x08000000 /* VHT80 channel */ #define IEEE80211_CHAN_VHT80_80 0x10000000 /* VHT80+80 channel */ #define IEEE80211_CHAN_VHT160 0x20000000 /* VHT160 channel */ /* XXX note: 0x80000000 is used in src/sbin/ifconfig/ifieee80211.c :( */ #define IEEE80211_CHAN_HT40 (IEEE80211_CHAN_HT40U | IEEE80211_CHAN_HT40D) #define IEEE80211_CHAN_HT (IEEE80211_CHAN_HT20 | IEEE80211_CHAN_HT40) #define IEEE80211_CHAN_VHT40 (IEEE80211_CHAN_VHT40U | IEEE80211_CHAN_VHT40D) #define IEEE80211_CHAN_VHT (IEEE80211_CHAN_VHT20 | IEEE80211_CHAN_VHT40 \ | IEEE80211_CHAN_VHT80 | IEEE80211_CHAN_VHT80_80 \ | IEEE80211_CHAN_VHT160) #define IEEE80211_CHAN_BITS \ "\20\1PRIV0\2PRIV2\3PRIV3\4PRIV4\5TURBO\6CCK\7OFDM\0102GHZ\0115GHZ" \ "\12PASSIVE\13DYN\14GFSK\15GSM\16STURBO\17HALF\20QUARTER\21HT20" \ "\22HT40U\23HT40D\24DFS\0254MSXMIT\26NOADHOC\27NOHOSTAP\03011D" \ "\031VHT20\032VHT40U\033VHT40D\034VHT80\035VHT80_80\036VHT160" /* * Useful combinations of channel characteristics. */ #define IEEE80211_CHAN_FHSS \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK) #define IEEE80211_CHAN_A \ (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM) #define IEEE80211_CHAN_B \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK) #define IEEE80211_CHAN_PUREG \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM) #define IEEE80211_CHAN_G \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN) #define IEEE80211_CHAN_108A \ (IEEE80211_CHAN_A | IEEE80211_CHAN_TURBO) #define IEEE80211_CHAN_108G \ (IEEE80211_CHAN_PUREG | IEEE80211_CHAN_TURBO) #define IEEE80211_CHAN_ST \ (IEEE80211_CHAN_108A | IEEE80211_CHAN_STURBO) #define IEEE80211_CHAN_ALL \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \ IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN | \ IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER | \ IEEE80211_CHAN_HT | IEEE80211_CHAN_VHT) #define IEEE80211_CHAN_ALLTURBO \ (IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO) #define IEEE80211_IS_CHAN_FHSS(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS) #define IEEE80211_IS_CHAN_A(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) #define IEEE80211_IS_CHAN_B(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) #define IEEE80211_IS_CHAN_PUREG(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG) #define IEEE80211_IS_CHAN_G(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) #define IEEE80211_IS_CHAN_ANYG(_c) \ (IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c)) #define IEEE80211_IS_CHAN_ST(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_ST) == IEEE80211_CHAN_ST) #define IEEE80211_IS_CHAN_108A(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_108A) == IEEE80211_CHAN_108A) #define IEEE80211_IS_CHAN_108G(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G) #define IEEE80211_IS_CHAN_2GHZ(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_2GHZ) != 0) #define IEEE80211_IS_CHAN_5GHZ(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_5GHZ) != 0) #define IEEE80211_IS_CHAN_PASSIVE(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_PASSIVE) != 0) #define IEEE80211_IS_CHAN_OFDM(_c) \ (((_c)->ic_flags & (IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN)) != 0) #define IEEE80211_IS_CHAN_CCK(_c) \ (((_c)->ic_flags & (IEEE80211_CHAN_CCK | IEEE80211_CHAN_DYN)) != 0) #define IEEE80211_IS_CHAN_DYN(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_DYN) == IEEE80211_CHAN_DYN) #define IEEE80211_IS_CHAN_GFSK(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_GFSK) != 0) #define IEEE80211_IS_CHAN_TURBO(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_TURBO) != 0) #define IEEE80211_IS_CHAN_STURBO(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_STURBO) != 0) #define IEEE80211_IS_CHAN_DTURBO(_c) \ (((_c)->ic_flags & \ (IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)) == IEEE80211_CHAN_TURBO) #define IEEE80211_IS_CHAN_HALF(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_HALF) != 0) #define IEEE80211_IS_CHAN_QUARTER(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_QUARTER) != 0) #define IEEE80211_IS_CHAN_FULL(_c) \ (((_c)->ic_flags & (IEEE80211_CHAN_QUARTER | IEEE80211_CHAN_HALF)) == 0) #define IEEE80211_IS_CHAN_GSM(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_GSM) != 0) #define IEEE80211_IS_CHAN_HT(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_HT) != 0) #define IEEE80211_IS_CHAN_HT20(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_HT20) != 0) #define IEEE80211_IS_CHAN_HT40(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_HT40) != 0) #define IEEE80211_IS_CHAN_HT40U(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_HT40U) != 0) #define IEEE80211_IS_CHAN_HT40D(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_HT40D) != 0) #define IEEE80211_IS_CHAN_HTA(_c) \ (IEEE80211_IS_CHAN_5GHZ(_c) && \ ((_c)->ic_flags & IEEE80211_CHAN_HT) != 0) #define IEEE80211_IS_CHAN_HTG(_c) \ (IEEE80211_IS_CHAN_2GHZ(_c) && \ ((_c)->ic_flags & IEEE80211_CHAN_HT) != 0) #define IEEE80211_IS_CHAN_DFS(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_DFS) != 0) #define IEEE80211_IS_CHAN_NOADHOC(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_NOADHOC) != 0) #define IEEE80211_IS_CHAN_NOHOSTAP(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_NOHOSTAP) != 0) #define IEEE80211_IS_CHAN_11D(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_11D) != 0) #define IEEE80211_IS_CHAN_VHT(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_VHT) != 0) #define IEEE80211_IS_CHAN_VHT_2GHZ(_c) \ (IEEE80211_IS_CHAN_2GHZ(_c) && \ ((_c)->ic_flags & IEEE80211_CHAN_VHT) != 0) #define IEEE80211_IS_CHAN_VHT_5GHZ(_c) \ (IEEE80211_IS_CHAN_5GHZ(_c) && \ ((_c)->ic_flags & IEEE80211_CHAN_VHT) != 0) #define IEEE80211_IS_CHAN_VHT20(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_VHT20) != 0) #define IEEE80211_IS_CHAN_VHT40(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_VHT40) != 0) #define IEEE80211_IS_CHAN_VHT40U(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_VHT40U) != 0) #define IEEE80211_IS_CHAN_VHT40D(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_VHT40D) != 0) #define IEEE80211_IS_CHAN_VHTA(_c) \ (IEEE80211_IS_CHAN_5GHZ(_c) && \ ((_c)->ic_flags & IEEE80211_CHAN_VHT) != 0) #define IEEE80211_IS_CHAN_VHTG(_c) \ (IEEE80211_IS_CHAN_2GHZ(_c) && \ ((_c)->ic_flags & IEEE80211_CHAN_VHT) != 0) #define IEEE80211_IS_CHAN_VHT80(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_VHT80) != 0) #define IEEE80211_IS_CHAN_VHT80_80(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_VHT80_80) != 0) #define IEEE80211_IS_CHAN_VHT160(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_VHT160) != 0) #define IEEE80211_CHAN2IEEE(_c) (_c)->ic_ieee /* dynamic state */ #define IEEE80211_CHANSTATE_RADAR 0x01 /* radar detected */ #define IEEE80211_CHANSTATE_CACDONE 0x02 /* CAC completed */ #define IEEE80211_CHANSTATE_CWINT 0x04 /* interference detected */ #define IEEE80211_CHANSTATE_NORADAR 0x10 /* post notify on radar clear */ #define IEEE80211_IS_CHAN_RADAR(_c) \ (((_c)->ic_state & IEEE80211_CHANSTATE_RADAR) != 0) #define IEEE80211_IS_CHAN_CACDONE(_c) \ (((_c)->ic_state & IEEE80211_CHANSTATE_CACDONE) != 0) #define IEEE80211_IS_CHAN_CWINT(_c) \ (((_c)->ic_state & IEEE80211_CHANSTATE_CWINT) != 0) /* ni_chan encoding for FH phy */ #define IEEE80211_FH_CHANMOD 80 #define IEEE80211_FH_CHAN(set,pat) (((set)-1)*IEEE80211_FH_CHANMOD+(pat)) #define IEEE80211_FH_CHANSET(chan) ((chan)/IEEE80211_FH_CHANMOD+1) #define IEEE80211_FH_CHANPAT(chan) ((chan)%IEEE80211_FH_CHANMOD) #define IEEE80211_TID_SIZE (WME_NUM_TID+1) /* WME TID's +1 for non-QoS */ #define IEEE80211_NONQOS_TID WME_NUM_TID /* index for non-QoS sta */ /* * The 802.11 spec says at most 2007 stations may be * associated at once. For most AP's this is way more * than is feasible so we use a default of 128. This * number may be overridden by the driver and/or by * user configuration but may not be less than IEEE80211_AID_MIN. */ #define IEEE80211_AID_DEF 128 #define IEEE80211_AID_MIN 16 /* * 802.11 rate set. */ #define IEEE80211_RATE_SIZE 8 /* 802.11 standard */ #define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */ struct ieee80211_rateset { uint8_t rs_nrates; uint8_t rs_rates[IEEE80211_RATE_MAXSIZE]; }; /* * 802.11n variant of ieee80211_rateset. Instead of * legacy rates the entries are MCS rates. We define * the structure such that it can be used interchangeably * with an ieee80211_rateset (modulo structure size). */ #define IEEE80211_HTRATE_MAXSIZE 77 struct ieee80211_htrateset { uint8_t rs_nrates; uint8_t rs_rates[IEEE80211_HTRATE_MAXSIZE]; }; #define IEEE80211_RATE_MCS 0x80 /* * Per-mode transmit parameters/controls visible to user space. * These can be used to set fixed transmit rate for all operating * modes or on a per-client basis according to the capabilities * of the client (e.g. an 11b client associated to an 11g ap). * * MCS are distinguished from legacy rates by or'ing in 0x80. */ struct ieee80211_txparam { uint8_t ucastrate; /* ucast data rate (legacy/MCS|0x80) */ uint8_t mgmtrate; /* mgmt frame rate (legacy/MCS|0x80) */ uint8_t mcastrate; /* multicast rate (legacy/MCS|0x80) */ uint8_t maxretry; /* max unicast data retry count */ }; /* * Per-mode roaming state visible to user space. There are two * thresholds that control whether roaming is considered; when * either is exceeded the 802.11 layer will check the scan cache * for another AP. If the cache is stale then a scan may be * triggered. */ struct ieee80211_roamparam { int8_t rssi; /* rssi thresh (.5 dBm) */ uint8_t rate; /* tx rate thresh (.5 Mb/s or MCS) */ uint16_t pad; /* reserve */ }; /* * Regulatory Information. */ struct ieee80211_regdomain { uint16_t regdomain; /* SKU */ uint16_t country; /* ISO country code */ uint8_t location; /* I (indoor), O (outdoor), other */ uint8_t ecm; /* Extended Channel Mode */ char isocc[2]; /* country code string */ short pad[2]; }; /* * MIMO antenna/radio state. */ #define IEEE80211_MAX_CHAINS 4 /* * This is the number of sub-channels for a channel. * 0 - pri20 * 1 - sec20 (HT40, VHT40) * 2 - sec40 (VHT80) * 3 - sec80 (VHT80+80, VHT160) */ #define IEEE80211_MAX_CHAIN_PRISEC 4 #define IEEE80211_MAX_EVM_DWORDS 16 /* 16 pilots, 4 chains */ #define IEEE80211_MAX_EVM_PILOTS 16 /* 468 subcarriers, 16 pilots */ struct ieee80211_mimo_chan_info { int8_t rssi[IEEE80211_MAX_CHAIN_PRISEC]; int8_t noise[IEEE80211_MAX_CHAIN_PRISEC]; }; struct ieee80211_mimo_info { struct ieee80211_mimo_chan_info ch[IEEE80211_MAX_CHAINS]; uint32_t evm[IEEE80211_MAX_EVM_DWORDS]; }; /* * ic_caps/iv_caps: device driver capabilities */ /* 0x2e available */ #define IEEE80211_C_STA 0x00000001 /* CAPABILITY: STA available */ #define IEEE80211_C_8023ENCAP 0x00000002 /* CAPABILITY: 802.3 encap */ #define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */ #define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/ #define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */ #define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */ #define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */ #define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */ #define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */ #define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */ #define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */ #define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */ #define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */ #define IEEE80211_C_DFS 0x00020000 /* CAPABILITY: DFS/radar avail*/ #define IEEE80211_C_MBSS 0x00040000 /* CAPABILITY: MBSS available */ #define IEEE80211_C_SWSLEEP 0x00080000 /* CAPABILITY: do sleep here */ #define IEEE80211_C_SWAMSDUTX 0x00100000 /* CAPABILITY: software A-MSDU TX */ /* 0x7c0000 available */ #define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */ #define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */ #define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/ #define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */ #define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */ #define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */ /* 0x10000000 reserved */ #define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */ #define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */ #define IEEE80211_C_TDMA 0x80000000 /* CAPABILITY: TDMA avail */ /* XXX protection/barker? */ #define IEEE80211_C_OPMODE \ (IEEE80211_C_STA | IEEE80211_C_IBSS | IEEE80211_C_HOSTAP | \ IEEE80211_C_AHDEMO | IEEE80211_C_MONITOR | IEEE80211_C_WDS | \ IEEE80211_C_TDMA | IEEE80211_C_MBSS) #define IEEE80211_C_BITS \ "\20\1STA\002803ENCAP\7FF\10TURBOP\11IBSS\12PMGT" \ "\13HOSTAP\14AHDEMO\15SWRETRY\16TXPMGT\17SHSLOT\20SHPREAMBLE" \ "\21MONITOR\22DFS\23MBSS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \ "\37TXFRAG\40TDMA" /* * ic_htcaps/iv_htcaps: HT-specific device/driver capabilities * * NB: the low 16-bits are the 802.11 definitions, the upper * 16-bits are used to define s/w/driver capabilities. */ #define IEEE80211_HTC_AMPDU 0x00010000 /* CAPABILITY: A-MPDU tx */ #define IEEE80211_HTC_AMSDU 0x00020000 /* CAPABILITY: A-MSDU tx */ /* NB: HT40 is implied by IEEE80211_HTCAP_CHWIDTH40 */ #define IEEE80211_HTC_HT 0x00040000 /* CAPABILITY: HT operation */ #define IEEE80211_HTC_SMPS 0x00080000 /* CAPABILITY: MIMO power save*/ #define IEEE80211_HTC_RIFS 0x00100000 /* CAPABILITY: RIFS support */ #define IEEE80211_HTC_RXUNEQUAL 0x00200000 /* CAPABILITY: RX unequal MCS */ #define IEEE80211_HTC_RXMCS32 0x00400000 /* CAPABILITY: MCS32 support */ #define IEEE80211_HTC_TXUNEQUAL 0x00800000 /* CAPABILITY: TX unequal MCS */ #define IEEE80211_HTC_TXMCS32 0x01000000 /* CAPABILITY: MCS32 support */ #define IEEE80211_HTC_TXLDPC 0x02000000 /* CAPABILITY: TX using LDPC */ #define IEEE80211_C_HTCAP_BITS \ "\20\1LDPC\2CHWIDTH40\5GREENFIELD\6SHORTGI20\7SHORTGI40\10TXSTBC" \ "\21AMPDU\22AMSDU\23HT\24SMPS\25RIFS\32TXLDPC" /* * RX status notification - which fields are valid. */ #define IEEE80211_R_NF 0x00000001 /* global NF value valid */ #define IEEE80211_R_RSSI 0x00000002 /* global RSSI value valid */ #define IEEE80211_R_C_CHAIN 0x00000004 /* RX chain count valid */ #define IEEE80211_R_C_NF 0x00000008 /* per-chain NF value valid */ #define IEEE80211_R_C_RSSI 0x00000010 /* per-chain RSSI value valid */ #define IEEE80211_R_C_EVM 0x00000020 /* per-chain EVM valid */ #define IEEE80211_R_C_HT40 0x00000040 /* RX'ed packet is 40mhz, pilots 4,5 valid */ #define IEEE80211_R_FREQ 0x00000080 /* Freq value populated, MHz */ #define IEEE80211_R_IEEE 0x00000100 /* IEEE value populated */ #define IEEE80211_R_BAND 0x00000200 /* Frequency band populated */ #define IEEE80211_R_TSF32 0x00004000 /* 32 bit TSF */ #define IEEE80211_R_TSF64 0x00008000 /* 64 bit TSF */ #define IEEE80211_R_TSF_START 0x00010000 /* TSF is sampled at start of frame */ #define IEEE80211_R_TSF_END 0x00020000 /* TSF is sampled at end of frame */ /* * RX status notification - describe the packet. */ #define IEEE80211_RX_F_STBC 0x00000001 #define IEEE80211_RX_F_LDPC 0x00000002 #define IEEE80211_RX_F_AMSDU 0x00000004 /* This is the start of an decap AMSDU list */ #define IEEE80211_RX_F_AMSDU_MORE 0x00000008 /* This is another decap AMSDU frame in the batch */ #define IEEE80211_RX_F_AMPDU 0x00000010 /* This is the start of an decap AMPDU list */ #define IEEE80211_RX_F_AMPDU_MORE 0x00000020 /* This is another decap AMPDU frame in the batch */ #define IEEE80211_RX_F_FAIL_FCSCRC 0x00000040 /* Failed CRC/FCS */ #define IEEE80211_RX_F_FAIL_MIC 0x00000080 /* Failed MIC check */ #define IEEE80211_RX_F_DECRYPTED 0x00000100 /* Hardware decrypted */ #define IEEE80211_RX_F_IV_STRIP 0x00000200 /* Decrypted; IV stripped */ #define IEEE80211_RX_F_MMIC_STRIP 0x00000400 /* Decrypted; MMIC stripped */ #define IEEE80211_RX_F_SHORTGI 0x00000800 /* This is a short-GI frame */ #define IEEE80211_RX_F_CCK 0x00001000 #define IEEE80211_RX_F_OFDM 0x00002000 #define IEEE80211_RX_F_HT 0x00004000 #define IEEE80211_RX_F_VHT 0x00008000 /* Channel width */ #define IEEE80211_RX_FW_20MHZ 1 #define IEEE80211_RX_FW_40MHZ 2 #define IEEE80211_RX_FW_80MHZ 3 /* PHY type */ #define IEEE80211_RX_FP_11B 1 #define IEEE80211_RX_FP_11G 2 #define IEEE80211_RX_FP_11A 3 #define IEEE80211_RX_FP_11NA 4 #define IEEE80211_RX_FP_11NG 5 struct ieee80211_rx_stats { uint32_t r_flags; /* IEEE80211_R_* flags */ uint32_t c_pktflags; /* IEEE80211_RX_F_* flags */ uint64_t c_rx_tsf; /* 32 or 64 bit TSF */ /* All DWORD aligned */ int16_t c_nf_ctl[IEEE80211_MAX_CHAINS]; /* per-chain NF */ int16_t c_nf_ext[IEEE80211_MAX_CHAINS]; /* per-chain NF */ int16_t c_rssi_ctl[IEEE80211_MAX_CHAINS]; /* per-chain RSSI */ int16_t c_rssi_ext[IEEE80211_MAX_CHAINS]; /* per-chain RSSI */ /* 32 bits */ uint8_t c_nf; /* global NF */ uint8_t c_rssi; /* global RSSI */ uint8_t c_chain; /* number of RX chains involved */ uint8_t c_rate; /* legacy; 11n rate code; VHT MCS */ /* 32 bits */ uint16_t c_freq; /* Frequency, MHz */ uint8_t c_ieee; /* Channel */ uint8_t c_width; /* channel width, FW flags above */ /* Force alignment to DWORD */ union { uint8_t evm[IEEE80211_MAX_CHAINS][IEEE80211_MAX_EVM_PILOTS]; /* per-chain, per-pilot EVM values */ uint32_t __aln[8]; } evm; /* 32 bits */ uint8_t c_phytype; /* PHY type, FW flags above */ uint8_t c_vhtnss; /* VHT - number of spatial streams */ uint8_t c_pad2[2]; }; struct ieee80211_rx_params { struct ieee80211_rx_stats params; }; #endif /* _NET80211__IEEE80211_H_ */