#include /*- * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. * Copyright (c) 2004 The NetBSD Foundation, Inc. All rights reserved. * Copyright (c) 2004 Lennart Augustsson. All rights reserved. * Copyright (c) 2004 Charles M. Hannum. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * USB Enhanced Host Controller Driver, a.k.a. USB 2.0 controller. * * The EHCI 0.96 spec can be found at * http://developer.intel.com/technology/usb/download/ehci-r096.pdf * The EHCI 1.0 spec can be found at * http://developer.intel.com/technology/usb/download/ehci-r10.pdf * and the USB 2.0 spec at * http://www.usb.org/developers/docs/usb_20.zip * */ /* * TODO: * 1) command failures are not recovered correctly */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define USB_DEBUG_VAR ehcidebug #include #include #include #include #include #include #include #include #include #include #include #include #define EHCI_BUS2SC(bus) \ ((ehci_softc_t *)(((uint8_t *)(bus)) - \ ((uint8_t *)&(((ehci_softc_t *)0)->sc_bus)))) #ifdef USB_DEBUG static int ehcidebug = 0; static int ehcinohighspeed = 0; static int ehciiaadbug = 0; static int ehcilostintrbug = 0; SYSCTL_NODE(_hw_usb, OID_AUTO, ehci, CTLFLAG_RW, 0, "USB ehci"); SYSCTL_INT(_hw_usb_ehci, OID_AUTO, debug, CTLFLAG_RW | CTLFLAG_TUN, &ehcidebug, 0, "Debug level"); TUNABLE_INT("hw.usb.ehci.debug", &ehcidebug); SYSCTL_INT(_hw_usb_ehci, OID_AUTO, no_hs, CTLFLAG_RW | CTLFLAG_TUN, &ehcinohighspeed, 0, "Disable High Speed USB"); TUNABLE_INT("hw.usb.ehci.no_hs", &ehcinohighspeed); SYSCTL_INT(_hw_usb_ehci, OID_AUTO, iaadbug, CTLFLAG_RW | CTLFLAG_TUN, &ehciiaadbug, 0, "Enable doorbell bug workaround"); TUNABLE_INT("hw.usb.ehci.iaadbug", &ehciiaadbug); SYSCTL_INT(_hw_usb_ehci, OID_AUTO, lostintrbug, CTLFLAG_RW | CTLFLAG_TUN, &ehcilostintrbug, 0, "Enable lost interrupt bug workaround"); TUNABLE_INT("hw.usb.ehci.lostintrbug", &ehcilostintrbug); static void ehci_dump_regs(ehci_softc_t *sc); static void ehci_dump_sqh(ehci_softc_t *sc, ehci_qh_t *sqh); #endif #define EHCI_INTR_ENDPT 1 extern struct usb_bus_methods ehci_bus_methods; extern struct usb_pipe_methods ehci_device_bulk_methods; extern struct usb_pipe_methods ehci_device_ctrl_methods; extern struct usb_pipe_methods ehci_device_intr_methods; extern struct usb_pipe_methods ehci_device_isoc_fs_methods; extern struct usb_pipe_methods ehci_device_isoc_hs_methods; static void ehci_do_poll(struct usb_bus *); static void ehci_device_done(struct usb_xfer *, usb_error_t); static uint8_t ehci_check_transfer(struct usb_xfer *); static void ehci_timeout(void *); static void ehci_poll_timeout(void *); static void ehci_root_intr(ehci_softc_t *sc); struct ehci_std_temp { ehci_softc_t *sc; struct usb_page_cache *pc; ehci_qtd_t *td; ehci_qtd_t *td_next; uint32_t average; uint32_t qtd_status; uint32_t len; uint16_t max_frame_size; uint8_t shortpkt; uint8_t auto_data_toggle; uint8_t setup_alt_next; uint8_t last_frame; }; void ehci_iterate_hw_softc(struct usb_bus *bus, usb_bus_mem_sub_cb_t *cb) { ehci_softc_t *sc = EHCI_BUS2SC(bus); uint32_t i; cb(bus, &sc->sc_hw.pframes_pc, &sc->sc_hw.pframes_pg, sizeof(uint32_t) * EHCI_FRAMELIST_COUNT, EHCI_FRAMELIST_ALIGN); cb(bus, &sc->sc_hw.terminate_pc, &sc->sc_hw.terminate_pg, sizeof(struct ehci_qh_sub), EHCI_QH_ALIGN); cb(bus, &sc->sc_hw.async_start_pc, &sc->sc_hw.async_start_pg, sizeof(ehci_qh_t), EHCI_QH_ALIGN); for (i = 0; i != EHCI_VIRTUAL_FRAMELIST_COUNT; i++) { cb(bus, sc->sc_hw.intr_start_pc + i, sc->sc_hw.intr_start_pg + i, sizeof(ehci_qh_t), EHCI_QH_ALIGN); } for (i = 0; i != EHCI_VIRTUAL_FRAMELIST_COUNT; i++) { cb(bus, sc->sc_hw.isoc_hs_start_pc + i, sc->sc_hw.isoc_hs_start_pg + i, sizeof(ehci_itd_t), EHCI_ITD_ALIGN); } for (i = 0; i != EHCI_VIRTUAL_FRAMELIST_COUNT; i++) { cb(bus, sc->sc_hw.isoc_fs_start_pc + i, sc->sc_hw.isoc_fs_start_pg + i, sizeof(ehci_sitd_t), EHCI_SITD_ALIGN); } } usb_error_t ehci_reset(ehci_softc_t *sc) { uint32_t hcr; int i; EOWRITE4(sc, EHCI_USBCMD, EHCI_CMD_HCRESET); for (i = 0; i < 100; i++) { usb_pause_mtx(NULL, hz / 128); hcr = EOREAD4(sc, EHCI_USBCMD) & EHCI_CMD_HCRESET; if (!hcr) { if (sc->sc_flags & (EHCI_SCFLG_SETMODE | EHCI_SCFLG_BIGEMMIO)) { /* * Force USBMODE as requested. Controllers * may have multiple operating modes. */ uint32_t usbmode = EOREAD4(sc, EHCI_USBMODE); if (sc->sc_flags & EHCI_SCFLG_SETMODE) { usbmode = (usbmode &~ EHCI_UM_CM) | EHCI_UM_CM_HOST; device_printf(sc->sc_bus.bdev, "set host controller mode\n"); } if (sc->sc_flags & EHCI_SCFLG_BIGEMMIO) { usbmode = (usbmode &~ EHCI_UM_ES) | EHCI_UM_ES_BE; device_printf(sc->sc_bus.bdev, "set big-endian mode\n"); } EOWRITE4(sc, EHCI_USBMODE, usbmode); } return (0); } } device_printf(sc->sc_bus.bdev, "Reset timeout\n"); return (USB_ERR_IOERROR); } static usb_error_t ehci_hcreset(ehci_softc_t *sc) { uint32_t hcr; int i; EOWRITE4(sc, EHCI_USBCMD, 0); /* Halt controller */ for (i = 0; i < 100; i++) { usb_pause_mtx(NULL, hz / 128); hcr = EOREAD4(sc, EHCI_USBSTS) & EHCI_STS_HCH; if (hcr) break; } if (!hcr) /* * Fall through and try reset anyway even though * Table 2-9 in the EHCI spec says this will result * in undefined behavior. */ device_printf(sc->sc_bus.bdev, "stop timeout\n"); return (ehci_reset(sc)); } static int ehci_init_sub(struct ehci_softc *sc) { struct usb_page_search buf_res; uint32_t cparams; uint32_t hcr; uint8_t i; cparams = EREAD4(sc, EHCI_HCCPARAMS); DPRINTF("cparams=0x%x\n", cparams); if (EHCI_HCC_64BIT(cparams)) { DPRINTF("HCC uses 64-bit structures\n"); /* MUST clear segment register if 64 bit capable */ EWRITE4(sc, EHCI_CTRLDSSEGMENT, 0); } usbd_get_page(&sc->sc_hw.pframes_pc, 0, &buf_res); EOWRITE4(sc, EHCI_PERIODICLISTBASE, buf_res.physaddr); usbd_get_page(&sc->sc_hw.async_start_pc, 0, &buf_res); EOWRITE4(sc, EHCI_ASYNCLISTADDR, buf_res.physaddr | EHCI_LINK_QH); /* enable interrupts */ EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs); /* turn on controller */ EOWRITE4(sc, EHCI_USBCMD, EHCI_CMD_ITC_1 | /* 1 microframes interrupt delay */ (EOREAD4(sc, EHCI_USBCMD) & EHCI_CMD_FLS_M) | EHCI_CMD_ASE | EHCI_CMD_PSE | EHCI_CMD_RS); /* Take over port ownership */ EOWRITE4(sc, EHCI_CONFIGFLAG, EHCI_CONF_CF); for (i = 0; i < 100; i++) { usb_pause_mtx(NULL, hz / 128); hcr = EOREAD4(sc, EHCI_USBSTS) & EHCI_STS_HCH; if (!hcr) { break; } } if (hcr) { device_printf(sc->sc_bus.bdev, "Run timeout\n"); return (USB_ERR_IOERROR); } return (USB_ERR_NORMAL_COMPLETION); } usb_error_t ehci_init(ehci_softc_t *sc) { struct usb_page_search buf_res; uint32_t version; uint32_t sparams; uint16_t i; uint16_t x; uint16_t y; uint16_t bit; usb_error_t err = 0; DPRINTF("start\n"); usb_callout_init_mtx(&sc->sc_tmo_pcd, &sc->sc_bus.bus_mtx, 0); usb_callout_init_mtx(&sc->sc_tmo_poll, &sc->sc_bus.bus_mtx, 0); sc->sc_offs = EHCI_CAPLENGTH(EREAD4(sc, EHCI_CAPLEN_HCIVERSION)); #ifdef USB_DEBUG if (ehciiaadbug) sc->sc_flags |= EHCI_SCFLG_IAADBUG; if (ehcilostintrbug) sc->sc_flags |= EHCI_SCFLG_LOSTINTRBUG; if (ehcidebug > 2) { ehci_dump_regs(sc); } #endif version = EHCI_HCIVERSION(EREAD4(sc, EHCI_CAPLEN_HCIVERSION)); device_printf(sc->sc_bus.bdev, "EHCI version %x.%x\n", version >> 8, version & 0xff); sparams = EREAD4(sc, EHCI_HCSPARAMS); DPRINTF("sparams=0x%x\n", sparams); sc->sc_noport = EHCI_HCS_N_PORTS(sparams); sc->sc_bus.usbrev = USB_REV_2_0; /* Reset the controller */ DPRINTF("%s: resetting\n", device_get_nameunit(sc->sc_bus.bdev)); err = ehci_hcreset(sc); if (err) { device_printf(sc->sc_bus.bdev, "reset timeout\n"); return (err); } /* * use current frame-list-size selection 0: 1024*4 bytes 1: 512*4 * bytes 2: 256*4 bytes 3: unknown */ if (EHCI_CMD_FLS(EOREAD4(sc, EHCI_USBCMD)) == 3) { device_printf(sc->sc_bus.bdev, "invalid frame-list-size\n"); return (USB_ERR_IOERROR); } /* set up the bus struct */ sc->sc_bus.methods = &ehci_bus_methods; sc->sc_eintrs = EHCI_NORMAL_INTRS; if (1) { struct ehci_qh_sub *qh; usbd_get_page(&sc->sc_hw.terminate_pc, 0, &buf_res); qh = buf_res.buffer; sc->sc_terminate_self = htohc32(sc, buf_res.physaddr); /* init terminate TD */ qh->qtd_next = htohc32(sc, EHCI_LINK_TERMINATE); qh->qtd_altnext = htohc32(sc, EHCI_LINK_TERMINATE); qh->qtd_status = htohc32(sc, EHCI_QTD_HALTED); } for (i = 0; i < EHCI_VIRTUAL_FRAMELIST_COUNT; i++) { ehci_qh_t *qh; usbd_get_page(sc->sc_hw.intr_start_pc + i, 0, &buf_res); qh = buf_res.buffer; /* initialize page cache pointer */ qh->page_cache = sc->sc_hw.intr_start_pc + i; /* store a pointer to queue head */ sc->sc_intr_p_last[i] = qh; qh->qh_self = htohc32(sc, buf_res.physaddr) | htohc32(sc, EHCI_LINK_QH); qh->qh_endp = htohc32(sc, EHCI_QH_SET_EPS(EHCI_QH_SPEED_HIGH)); qh->qh_endphub = htohc32(sc, EHCI_QH_SET_MULT(1)); qh->qh_curqtd = 0; qh->qh_qtd.qtd_next = htohc32(sc, EHCI_LINK_TERMINATE); qh->qh_qtd.qtd_altnext = htohc32(sc, EHCI_LINK_TERMINATE); qh->qh_qtd.qtd_status = htohc32(sc, EHCI_QTD_HALTED); } /* * the QHs are arranged to give poll intervals that are * powers of 2 times 1ms */ bit = EHCI_VIRTUAL_FRAMELIST_COUNT / 2; while (bit) { x = bit; while (x & bit) { ehci_qh_t *qh_x; ehci_qh_t *qh_y; y = (x ^ bit) | (bit / 2); qh_x = sc->sc_intr_p_last[x]; qh_y = sc->sc_intr_p_last[y]; /* * the next QH has half the poll interval */ qh_x->qh_link = qh_y->qh_self; x++; } bit >>= 1; } if (1) { ehci_qh_t *qh; qh = sc->sc_intr_p_last[0]; /* the last (1ms) QH terminates */ qh->qh_link = htohc32(sc, EHCI_LINK_TERMINATE); } for (i = 0; i < EHCI_VIRTUAL_FRAMELIST_COUNT; i++) { ehci_sitd_t *sitd; ehci_itd_t *itd; usbd_get_page(sc->sc_hw.isoc_fs_start_pc + i, 0, &buf_res); sitd = buf_res.buffer; /* initialize page cache pointer */ sitd->page_cache = sc->sc_hw.isoc_fs_start_pc + i; /* store a pointer to the transfer descriptor */ sc->sc_isoc_fs_p_last[i] = sitd; /* initialize full speed isochronous */ sitd->sitd_self = htohc32(sc, buf_res.physaddr) | htohc32(sc, EHCI_LINK_SITD); sitd->sitd_back = htohc32(sc, EHCI_LINK_TERMINATE); sitd->sitd_next = sc->sc_intr_p_last[i | (EHCI_VIRTUAL_FRAMELIST_COUNT / 2)]->qh_self; usbd_get_page(sc->sc_hw.isoc_hs_start_pc + i, 0, &buf_res); itd = buf_res.buffer; /* initialize page cache pointer */ itd->page_cache = sc->sc_hw.isoc_hs_start_pc + i; /* store a pointer to the transfer descriptor */ sc->sc_isoc_hs_p_last[i] = itd; /* initialize high speed isochronous */ itd->itd_self = htohc32(sc, buf_res.physaddr) | htohc32(sc, EHCI_LINK_ITD); itd->itd_next = sitd->sitd_self; } usbd_get_page(&sc->sc_hw.pframes_pc, 0, &buf_res); if (1) { uint32_t *pframes; pframes = buf_res.buffer; /* * execution order: * pframes -> high speed isochronous -> * full speed isochronous -> interrupt QH's */ for (i = 0; i < EHCI_FRAMELIST_COUNT; i++) { pframes[i] = sc->sc_isoc_hs_p_last [i & (EHCI_VIRTUAL_FRAMELIST_COUNT - 1)]->itd_self; } } usbd_get_page(&sc->sc_hw.async_start_pc, 0, &buf_res); if (1) { ehci_qh_t *qh; qh = buf_res.buffer; /* initialize page cache pointer */ qh->page_cache = &sc->sc_hw.async_start_pc; /* store a pointer to the queue head */ sc->sc_async_p_last = qh; /* init dummy QH that starts the async list */ qh->qh_self = htohc32(sc, buf_res.physaddr) | htohc32(sc, EHCI_LINK_QH); /* fill the QH */ qh->qh_endp = htohc32(sc, EHCI_QH_SET_EPS(EHCI_QH_SPEED_HIGH) | EHCI_QH_HRECL); qh->qh_endphub = htohc32(sc, EHCI_QH_SET_MULT(1)); qh->qh_link = qh->qh_self; qh->qh_curqtd = 0; /* fill the overlay qTD */ qh->qh_qtd.qtd_next = htohc32(sc, EHCI_LINK_TERMINATE); qh->qh_qtd.qtd_altnext = htohc32(sc, EHCI_LINK_TERMINATE); qh->qh_qtd.qtd_status = htohc32(sc, EHCI_QTD_HALTED); } /* flush all cache into memory */ usb_bus_mem_flush_all(&sc->sc_bus, &ehci_iterate_hw_softc); #ifdef USB_DEBUG if (ehcidebug) { ehci_dump_sqh(sc, sc->sc_async_p_last); } #endif /* finial setup */ err = ehci_init_sub(sc); if (!err) { /* catch any lost interrupts */ ehci_do_poll(&sc->sc_bus); } return (err); } /* * shut down the controller when the system is going down */ void ehci_detach(ehci_softc_t *sc) { USB_BUS_LOCK(&sc->sc_bus); usb_callout_stop(&sc->sc_tmo_pcd); usb_callout_stop(&sc->sc_tmo_poll); EOWRITE4(sc, EHCI_USBINTR, 0); USB_BUS_UNLOCK(&sc->sc_bus); if (ehci_hcreset(sc)) { DPRINTF("reset failed!\n"); } /* XXX let stray task complete */ usb_pause_mtx(NULL, hz / 20); usb_callout_drain(&sc->sc_tmo_pcd); usb_callout_drain(&sc->sc_tmo_poll); } static void ehci_suspend(ehci_softc_t *sc) { DPRINTF("stopping the HC\n"); /* reset HC */ ehci_hcreset(sc); } static void ehci_resume(ehci_softc_t *sc) { /* reset HC */ ehci_hcreset(sc); /* setup HC */ ehci_init_sub(sc); /* catch any lost interrupts */ ehci_do_poll(&sc->sc_bus); } #ifdef USB_DEBUG static void ehci_dump_regs(ehci_softc_t *sc) { uint32_t i; i = EOREAD4(sc, EHCI_USBCMD); printf("cmd=0x%08x\n", i); if (i & EHCI_CMD_ITC_1) printf(" EHCI_CMD_ITC_1\n"); if (i & EHCI_CMD_ITC_2) printf(" EHCI_CMD_ITC_2\n"); if (i & EHCI_CMD_ITC_4) printf(" EHCI_CMD_ITC_4\n"); if (i & EHCI_CMD_ITC_8) printf(" EHCI_CMD_ITC_8\n"); if (i & EHCI_CMD_ITC_16) printf(" EHCI_CMD_ITC_16\n"); if (i & EHCI_CMD_ITC_32) printf(" EHCI_CMD_ITC_32\n"); if (i & EHCI_CMD_ITC_64) printf(" EHCI_CMD_ITC_64\n"); if (i & EHCI_CMD_ASPME) printf(" EHCI_CMD_ASPME\n"); if (i & EHCI_CMD_ASPMC) printf(" EHCI_CMD_ASPMC\n"); if (i & EHCI_CMD_LHCR) printf(" EHCI_CMD_LHCR\n"); if (i & EHCI_CMD_IAAD) printf(" EHCI_CMD_IAAD\n"); if (i & EHCI_CMD_ASE) printf(" EHCI_CMD_ASE\n"); if (i & EHCI_CMD_PSE) printf(" EHCI_CMD_PSE\n"); if (i & EHCI_CMD_FLS_M) printf(" EHCI_CMD_FLS_M\n"); if (i & EHCI_CMD_HCRESET) printf(" EHCI_CMD_HCRESET\n"); if (i & EHCI_CMD_RS) printf(" EHCI_CMD_RS\n"); i = EOREAD4(sc, EHCI_USBSTS); printf("sts=0x%08x\n", i); if (i & EHCI_STS_ASS) printf(" EHCI_STS_ASS\n"); if (i & EHCI_STS_PSS) printf(" EHCI_STS_PSS\n"); if (i & EHCI_STS_REC) printf(" EHCI_STS_REC\n"); if (i & EHCI_STS_HCH) printf(" EHCI_STS_HCH\n"); if (i & EHCI_STS_IAA) printf(" EHCI_STS_IAA\n"); if (i & EHCI_STS_HSE) printf(" EHCI_STS_HSE\n"); if (i & EHCI_STS_FLR) printf(" EHCI_STS_FLR\n"); if (i & EHCI_STS_PCD) printf(" EHCI_STS_PCD\n"); if (i & EHCI_STS_ERRINT) printf(" EHCI_STS_ERRINT\n"); if (i & EHCI_STS_INT) printf(" EHCI_STS_INT\n"); printf("ien=0x%08x\n", EOREAD4(sc, EHCI_USBINTR)); printf("frindex=0x%08x ctrdsegm=0x%08x periodic=0x%08x async=0x%08x\n", EOREAD4(sc, EHCI_FRINDEX), EOREAD4(sc, EHCI_CTRLDSSEGMENT), EOREAD4(sc, EHCI_PERIODICLISTBASE), EOREAD4(sc, EHCI_ASYNCLISTADDR)); for (i = 1; i <= sc->sc_noport; i++) { printf("port %d status=0x%08x\n", i, EOREAD4(sc, EHCI_PORTSC(i))); } } static void ehci_dump_link(ehci_softc_t *sc, uint32_t link, int type) { link = hc32toh(sc, link); printf("0x%08x", link); if (link & EHCI_LINK_TERMINATE) printf(""); else { printf("<"); if (type) { switch (EHCI_LINK_TYPE(link)) { case EHCI_LINK_ITD: printf("ITD"); break; case EHCI_LINK_QH: printf("QH"); break; case EHCI_LINK_SITD: printf("SITD"); break; case EHCI_LINK_FSTN: printf("FSTN"); break; } } printf(">"); } } static void ehci_dump_qtd(ehci_softc_t *sc, ehci_qtd_t *qtd) { uint32_t s; printf(" next="); ehci_dump_link(sc, qtd->qtd_next, 0); printf(" altnext="); ehci_dump_link(sc, qtd->qtd_altnext, 0); printf("\n"); s = hc32toh(sc, qtd->qtd_status); printf(" status=0x%08x: toggle=%d bytes=0x%x ioc=%d c_page=0x%x\n", s, EHCI_QTD_GET_TOGGLE(s), EHCI_QTD_GET_BYTES(s), EHCI_QTD_GET_IOC(s), EHCI_QTD_GET_C_PAGE(s)); printf(" cerr=%d pid=%d stat=%s%s%s%s%s%s%s%s\n", EHCI_QTD_GET_CERR(s), EHCI_QTD_GET_PID(s), (s & EHCI_QTD_ACTIVE) ? "ACTIVE" : "NOT_ACTIVE", (s & EHCI_QTD_HALTED) ? "-HALTED" : "", (s & EHCI_QTD_BUFERR) ? "-BUFERR" : "", (s & EHCI_QTD_BABBLE) ? "-BABBLE" : "", (s & EHCI_QTD_XACTERR) ? "-XACTERR" : "", (s & EHCI_QTD_MISSEDMICRO) ? "-MISSED" : "", (s & EHCI_QTD_SPLITXSTATE) ? "-SPLIT" : "", (s & EHCI_QTD_PINGSTATE) ? "-PING" : ""); for (s = 0; s < 5; s++) { printf(" buffer[%d]=0x%08x\n", s, hc32toh(sc, qtd->qtd_buffer[s])); } for (s = 0; s < 5; s++) { printf(" buffer_hi[%d]=0x%08x\n", s, hc32toh(sc, qtd->qtd_buffer_hi[s])); } } static uint8_t ehci_dump_sqtd(ehci_softc_t *sc, ehci_qtd_t *sqtd) { uint8_t temp; usb_pc_cpu_invalidate(sqtd->page_cache); printf("QTD(%p) at 0x%08x:\n", sqtd, hc32toh(sc, sqtd->qtd_self)); ehci_dump_qtd(sc, sqtd); temp = (sqtd->qtd_next & htohc32(sc, EHCI_LINK_TERMINATE)) ? 1 : 0; return (temp); } static void ehci_dump_sqtds(ehci_softc_t *sc, ehci_qtd_t *sqtd) { uint16_t i; uint8_t stop; stop = 0; for (i = 0; sqtd && (i < 20) && !stop; sqtd = sqtd->obj_next, i++) { stop = ehci_dump_sqtd(sc, sqtd); } if (sqtd) { printf("dump aborted, too many TDs\n"); } } static void ehci_dump_sqh(ehci_softc_t *sc, ehci_qh_t *qh) { uint32_t endp; uint32_t endphub; usb_pc_cpu_invalidate(qh->page_cache); printf("QH(%p) at 0x%08x:\n", qh, hc32toh(sc, qh->qh_self) & ~0x1F); printf(" link="); ehci_dump_link(sc, qh->qh_link, 1); printf("\n"); endp = hc32toh(sc, qh->qh_endp); printf(" endp=0x%08x\n", endp); printf(" addr=0x%02x inact=%d endpt=%d eps=%d dtc=%d hrecl=%d\n", EHCI_QH_GET_ADDR(endp), EHCI_QH_GET_INACT(endp), EHCI_QH_GET_ENDPT(endp), EHCI_QH_GET_EPS(endp), EHCI_QH_GET_DTC(endp), EHCI_QH_GET_HRECL(endp)); printf(" mpl=0x%x ctl=%d nrl=%d\n", EHCI_QH_GET_MPL(endp), EHCI_QH_GET_CTL(endp), EHCI_QH_GET_NRL(endp)); endphub = hc32toh(sc, qh->qh_endphub); printf(" endphub=0x%08x\n", endphub); printf(" smask=0x%02x cmask=0x%02x huba=0x%02x port=%d mult=%d\n", EHCI_QH_GET_SMASK(endphub), EHCI_QH_GET_CMASK(endphub), EHCI_QH_GET_HUBA(endphub), EHCI_QH_GET_PORT(endphub), EHCI_QH_GET_MULT(endphub)); printf(" curqtd="); ehci_dump_link(sc, qh->qh_curqtd, 0); printf("\n"); printf("Overlay qTD:\n"); ehci_dump_qtd(sc, (void *)&qh->qh_qtd); } static void ehci_dump_sitd(ehci_softc_t *sc, ehci_sitd_t *sitd) { usb_pc_cpu_invalidate(sitd->page_cache); printf("SITD(%p) at 0x%08x\n", sitd, hc32toh(sc, sitd->sitd_self) & ~0x1F); printf(" next=0x%08x\n", hc32toh(sc, sitd->sitd_next)); printf(" portaddr=0x%08x dir=%s addr=%d endpt=0x%x port=0x%x huba=0x%x\n", hc32toh(sc, sitd->sitd_portaddr), (sitd->sitd_portaddr & htohc32(sc, EHCI_SITD_SET_DIR_IN)) ? "in" : "out", EHCI_SITD_GET_ADDR(hc32toh(sc, sitd->sitd_portaddr)), EHCI_SITD_GET_ENDPT(hc32toh(sc, sitd->sitd_portaddr)), EHCI_SITD_GET_PORT(hc32toh(sc, sitd->sitd_portaddr)), EHCI_SITD_GET_HUBA(hc32toh(sc, sitd->sitd_portaddr))); printf(" mask=0x%08x\n", hc32toh(sc, sitd->sitd_mask)); printf(" status=0x%08x <%s> len=0x%x\n", hc32toh(sc, sitd->sitd_status), (sitd->sitd_status & htohc32(sc, EHCI_SITD_ACTIVE)) ? "ACTIVE" : "", EHCI_SITD_GET_LEN(hc32toh(sc, sitd->sitd_status))); printf(" back=0x%08x, bp=0x%08x,0x%08x,0x%08x,0x%08x\n", hc32toh(sc, sitd->sitd_back), hc32toh(sc, sitd->sitd_bp[0]), hc32toh(sc, sitd->sitd_bp[1]), hc32toh(sc, sitd->sitd_bp_hi[0]), hc32toh(sc, sitd->sitd_bp_hi[1])); } static void ehci_dump_itd(ehci_softc_t *sc, ehci_itd_t *itd) { usb_pc_cpu_invalidate(itd->page_cache); printf("ITD(%p) at 0x%08x\n", itd, hc32toh(sc, itd->itd_self) & ~0x1F); printf(" next=0x%08x\n", hc32toh(sc, itd->itd_next)); printf(" status[0]=0x%08x; <%s>\n", hc32toh(sc, itd->itd_status[0]), (itd->itd_status[0] & htohc32(sc, EHCI_ITD_ACTIVE)) ? "ACTIVE" : ""); printf(" status[1]=0x%08x; <%s>\n", hc32toh(sc, itd->itd_status[1]), (itd->itd_status[1] & htohc32(sc, EHCI_ITD_ACTIVE)) ? "ACTIVE" : ""); printf(" status[2]=0x%08x; <%s>\n", hc32toh(sc, itd->itd_status[2]), (itd->itd_status[2] & htohc32(sc, EHCI_ITD_ACTIVE)) ? "ACTIVE" : ""); printf(" status[3]=0x%08x; <%s>\n", hc32toh(sc, itd->itd_status[3]), (itd->itd_status[3] & htohc32(sc, EHCI_ITD_ACTIVE)) ? "ACTIVE" : ""); printf(" status[4]=0x%08x; <%s>\n", hc32toh(sc, itd->itd_status[4]), (itd->itd_status[4] & htohc32(sc, EHCI_ITD_ACTIVE)) ? "ACTIVE" : ""); printf(" status[5]=0x%08x; <%s>\n", hc32toh(sc, itd->itd_status[5]), (itd->itd_status[5] & htohc32(sc, EHCI_ITD_ACTIVE)) ? "ACTIVE" : ""); printf(" status[6]=0x%08x; <%s>\n", hc32toh(sc, itd->itd_status[6]), (itd->itd_status[6] & htohc32(sc, EHCI_ITD_ACTIVE)) ? "ACTIVE" : ""); printf(" status[7]=0x%08x; <%s>\n", hc32toh(sc, itd->itd_status[7]), (itd->itd_status[7] & htohc32(sc, EHCI_ITD_ACTIVE)) ? "ACTIVE" : ""); printf(" bp[0]=0x%08x\n", hc32toh(sc, itd->itd_bp[0])); printf(" addr=0x%02x; endpt=0x%01x\n", EHCI_ITD_GET_ADDR(hc32toh(sc, itd->itd_bp[0])), EHCI_ITD_GET_ENDPT(hc32toh(sc, itd->itd_bp[0]))); printf(" bp[1]=0x%08x\n", hc32toh(sc, itd->itd_bp[1])); printf(" dir=%s; mpl=0x%02x\n", (hc32toh(sc, itd->itd_bp[1]) & EHCI_ITD_SET_DIR_IN) ? "in" : "out", EHCI_ITD_GET_MPL(hc32toh(sc, itd->itd_bp[1]))); printf(" bp[2..6]=0x%08x,0x%08x,0x%08x,0x%08x,0x%08x\n", hc32toh(sc, itd->itd_bp[2]), hc32toh(sc, itd->itd_bp[3]), hc32toh(sc, itd->itd_bp[4]), hc32toh(sc, itd->itd_bp[5]), hc32toh(sc, itd->itd_bp[6])); printf(" bp_hi=0x%08x,0x%08x,0x%08x,0x%08x,\n" " 0x%08x,0x%08x,0x%08x\n", hc32toh(sc, itd->itd_bp_hi[0]), hc32toh(sc, itd->itd_bp_hi[1]), hc32toh(sc, itd->itd_bp_hi[2]), hc32toh(sc, itd->itd_bp_hi[3]), hc32toh(sc, itd->itd_bp_hi[4]), hc32toh(sc, itd->itd_bp_hi[5]), hc32toh(sc, itd->itd_bp_hi[6])); } static void ehci_dump_isoc(ehci_softc_t *sc) { ehci_itd_t *itd; ehci_sitd_t *sitd; uint16_t max = 1000; uint16_t pos; pos = (EOREAD4(sc, EHCI_FRINDEX) / 8) & (EHCI_VIRTUAL_FRAMELIST_COUNT - 1); printf("%s: isochronous dump from frame 0x%03x:\n", __FUNCTION__, pos); itd = sc->sc_isoc_hs_p_last[pos]; sitd = sc->sc_isoc_fs_p_last[pos]; while (itd && max && max--) { ehci_dump_itd(sc, itd); itd = itd->prev; } while (sitd && max && max--) { ehci_dump_sitd(sc, sitd); sitd = sitd->prev; } } #endif static void ehci_transfer_intr_enqueue(struct usb_xfer *xfer) { /* check for early completion */ if (ehci_check_transfer(xfer)) { return; } /* put transfer on interrupt queue */ usbd_transfer_enqueue(&xfer->xroot->bus->intr_q, xfer); /* start timeout, if any */ if (xfer->timeout != 0) { usbd_transfer_timeout_ms(xfer, &ehci_timeout, xfer->timeout); } } #define EHCI_APPEND_FS_TD(std,last) (last) = _ehci_append_fs_td(std,last) static ehci_sitd_t * _ehci_append_fs_td(ehci_sitd_t *std, ehci_sitd_t *last) { DPRINTFN(11, "%p to %p\n", std, last); /* (sc->sc_bus.mtx) must be locked */ std->next = last->next; std->sitd_next = last->sitd_next; std->prev = last; usb_pc_cpu_flush(std->page_cache); /* * the last->next->prev is never followed: std->next->prev = std; */ last->next = std; last->sitd_next = std->sitd_self; usb_pc_cpu_flush(last->page_cache); return (std); } #define EHCI_APPEND_HS_TD(std,last) (last) = _ehci_append_hs_td(std,last) static ehci_itd_t * _ehci_append_hs_td(ehci_itd_t *std, ehci_itd_t *last) { DPRINTFN(11, "%p to %p\n", std, last); /* (sc->sc_bus.mtx) must be locked */ std->next = last->next; std->itd_next = last->itd_next; std->prev = last; usb_pc_cpu_flush(std->page_cache); /* * the last->next->prev is never followed: std->next->prev = std; */ last->next = std; last->itd_next = std->itd_self; usb_pc_cpu_flush(last->page_cache); return (std); } #define EHCI_APPEND_QH(sqh,last) (last) = _ehci_append_qh(sqh,last) static ehci_qh_t * _ehci_append_qh(ehci_qh_t *sqh, ehci_qh_t *last) { DPRINTFN(11, "%p to %p\n", sqh, last); if (sqh->prev != NULL) { /* should not happen */ DPRINTFN(0, "QH already linked!\n"); return (last); } /* (sc->sc_bus.mtx) must be locked */ sqh->next = last->next; sqh->qh_link = last->qh_link; sqh->prev = last; usb_pc_cpu_flush(sqh->page_cache); /* * the last->next->prev is never followed: sqh->next->prev = sqh; */ last->next = sqh; last->qh_link = sqh->qh_self; usb_pc_cpu_flush(last->page_cache); return (sqh); } #define EHCI_REMOVE_FS_TD(std,last) (last) = _ehci_remove_fs_td(std,last) static ehci_sitd_t * _ehci_remove_fs_td(ehci_sitd_t *std, ehci_sitd_t *last) { DPRINTFN(11, "%p from %p\n", std, last); /* (sc->sc_bus.mtx) must be locked */ std->prev->next = std->next; std->prev->sitd_next = std->sitd_next; usb_pc_cpu_flush(std->prev->page_cache); if (std->next) { std->next->prev = std->prev; usb_pc_cpu_flush(std->next->page_cache); } return ((last == std) ? std->prev : last); } #define EHCI_REMOVE_HS_TD(std,last) (last) = _ehci_remove_hs_td(std,last) static ehci_itd_t * _ehci_remove_hs_td(ehci_itd_t *std, ehci_itd_t *last) { DPRINTFN(11, "%p from %p\n", std, last); /* (sc->sc_bus.mtx) must be locked */ std->prev->next = std->next; std->prev->itd_next = std->itd_next; usb_pc_cpu_flush(std->prev->page_cache); if (std->next) { std->next->prev = std->prev; usb_pc_cpu_flush(std->next->page_cache); } return ((last == std) ? std->prev : last); } #define EHCI_REMOVE_QH(sqh,last) (last) = _ehci_remove_qh(sqh,last) static ehci_qh_t * _ehci_remove_qh(ehci_qh_t *sqh, ehci_qh_t *last) { DPRINTFN(11, "%p from %p\n", sqh, last); /* (sc->sc_bus.mtx) must be locked */ /* only remove if not removed from a queue */ if (sqh->prev) { sqh->prev->next = sqh->next; sqh->prev->qh_link = sqh->qh_link; usb_pc_cpu_flush(sqh->prev->page_cache); if (sqh->next) { sqh->next->prev = sqh->prev; usb_pc_cpu_flush(sqh->next->page_cache); } last = ((last == sqh) ? sqh->prev : last); sqh->prev = 0; usb_pc_cpu_flush(sqh->page_cache); } return (last); } static void ehci_data_toggle_update(struct usb_xfer *xfer, uint16_t actlen, uint16_t xlen) { uint16_t rem; uint8_t dt; /* count number of full packets */ dt = (actlen / xfer->max_packet_size) & 1; /* compute remainder */ rem = actlen % xfer->max_packet_size; if (rem > 0) dt ^= 1; /* short packet at the end */ else if (actlen != xlen) dt ^= 1; /* zero length packet at the end */ else if (xlen == 0) dt ^= 1; /* zero length transfer */ xfer->endpoint->toggle_next ^= dt; } static usb_error_t ehci_non_isoc_done_sub(struct usb_xfer *xfer) { ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); ehci_qtd_t *td; ehci_qtd_t *td_alt_next; uint32_t status; uint16_t len; td = xfer->td_transfer_cache; td_alt_next = td->alt_next; if (xfer->aframes != xfer->nframes) { usbd_xfer_set_frame_len(xfer, xfer->aframes, 0); } while (1) { usb_pc_cpu_invalidate(td->page_cache); status = hc32toh(sc, td->qtd_status); len = EHCI_QTD_GET_BYTES(status); /* * Verify the status length and * add the length to "frlengths[]": */ if (len > td->len) { /* should not happen */ DPRINTF("Invalid status length, " "0x%04x/0x%04x bytes\n", len, td->len); status |= EHCI_QTD_HALTED; } else if (xfer->aframes != xfer->nframes) { xfer->frlengths[xfer->aframes] += td->len - len; /* manually update data toggle */ ehci_data_toggle_update(xfer, td->len - len, td->len); } /* Check for last transfer */ if (((void *)td) == xfer->td_transfer_last) { td = NULL; break; } /* Check for transfer error */ if (status & EHCI_QTD_HALTED) { /* the transfer is finished */ td = NULL; break; } /* Check for short transfer */ if (len > 0) { if (xfer->flags_int.short_frames_ok) { /* follow alt next */ td = td->alt_next; } else { /* the transfer is finished */ td = NULL; } break; } td = td->obj_next; if (td->alt_next != td_alt_next) { /* this USB frame is complete */ break; } } /* update transfer cache */ xfer->td_transfer_cache = td; #ifdef USB_DEBUG if (status & EHCI_QTD_STATERRS) { DPRINTFN(11, "error, addr=%d, endpt=0x%02x, frame=0x%02x" "status=%s%s%s%s%s%s%s%s\n", xfer->address, xfer->endpointno, xfer->aframes, (status & EHCI_QTD_ACTIVE) ? "[ACTIVE]" : "[NOT_ACTIVE]", (status & EHCI_QTD_HALTED) ? "[HALTED]" : "", (status & EHCI_QTD_BUFERR) ? "[BUFERR]" : "", (status & EHCI_QTD_BABBLE) ? "[BABBLE]" : "", (status & EHCI_QTD_XACTERR) ? "[XACTERR]" : "", (status & EHCI_QTD_MISSEDMICRO) ? "[MISSED]" : "", (status & EHCI_QTD_SPLITXSTATE) ? "[SPLIT]" : "", (status & EHCI_QTD_PINGSTATE) ? "[PING]" : ""); } #endif return ((status & EHCI_QTD_HALTED) ? USB_ERR_STALLED : USB_ERR_NORMAL_COMPLETION); } static void ehci_non_isoc_done(struct usb_xfer *xfer) { ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); ehci_qh_t *qh; uint32_t status; usb_error_t err = 0; DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n", xfer, xfer->endpoint); #ifdef USB_DEBUG if (ehcidebug > 10) { ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); ehci_dump_sqtds(sc, xfer->td_transfer_first); } #endif /* extract data toggle directly from the QH's overlay area */ qh = xfer->qh_start[xfer->flags_int.curr_dma_set]; usb_pc_cpu_invalidate(qh->page_cache); status = hc32toh(sc, qh->qh_qtd.qtd_status); /* reset scanner */ xfer->td_transfer_cache = xfer->td_transfer_first; if (xfer->flags_int.control_xfr) { if (xfer->flags_int.control_hdr) { err = ehci_non_isoc_done_sub(xfer); } xfer->aframes = 1; if (xfer->td_transfer_cache == NULL) { goto done; } } while (xfer->aframes != xfer->nframes) { err = ehci_non_isoc_done_sub(xfer); xfer->aframes++; if (xfer->td_transfer_cache == NULL) { goto done; } } if (xfer->flags_int.control_xfr && !xfer->flags_int.control_act) { err = ehci_non_isoc_done_sub(xfer); } done: ehci_device_done(xfer, err); } /*------------------------------------------------------------------------* * ehci_check_transfer * * Return values: * 0: USB transfer is not finished * Else: USB transfer is finished *------------------------------------------------------------------------*/ static uint8_t ehci_check_transfer(struct usb_xfer *xfer) { struct usb_pipe_methods *methods = xfer->endpoint->methods; ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); uint32_t status; DPRINTFN(13, "xfer=%p checking transfer\n", xfer); if (methods == &ehci_device_isoc_fs_methods) { ehci_sitd_t *td; /* isochronous full speed transfer */ td = xfer->td_transfer_last; usb_pc_cpu_invalidate(td->page_cache); status = hc32toh(sc, td->sitd_status); /* also check if first is complete */ td = xfer->td_transfer_first; usb_pc_cpu_invalidate(td->page_cache); status |= hc32toh(sc, td->sitd_status); if (!(status & EHCI_SITD_ACTIVE)) { ehci_device_done(xfer, USB_ERR_NORMAL_COMPLETION); goto transferred; } } else if (methods == &ehci_device_isoc_hs_methods) { ehci_itd_t *td; /* isochronous high speed transfer */ /* check last transfer */ td = xfer->td_transfer_last; usb_pc_cpu_invalidate(td->page_cache); status = td->itd_status[0]; status |= td->itd_status[1]; status |= td->itd_status[2]; status |= td->itd_status[3]; status |= td->itd_status[4]; status |= td->itd_status[5]; status |= td->itd_status[6]; status |= td->itd_status[7]; /* also check first transfer */ td = xfer->td_transfer_first; usb_pc_cpu_invalidate(td->page_cache); status |= td->itd_status[0]; status |= td->itd_status[1]; status |= td->itd_status[2]; status |= td->itd_status[3]; status |= td->itd_status[4]; status |= td->itd_status[5]; status |= td->itd_status[6]; status |= td->itd_status[7]; /* if no transactions are active we continue */ if (!(status & htohc32(sc, EHCI_ITD_ACTIVE))) { ehci_device_done(xfer, USB_ERR_NORMAL_COMPLETION); goto transferred; } } else { ehci_qtd_t *td; ehci_qh_t *qh; /* non-isochronous transfer */ /* * check whether there is an error somewhere in the middle, * or whether there was a short packet (SPD and not ACTIVE) */ td = xfer->td_transfer_cache; qh = xfer->qh_start[xfer->flags_int.curr_dma_set]; usb_pc_cpu_invalidate(qh->page_cache); status = hc32toh(sc, qh->qh_qtd.qtd_status); if (status & EHCI_QTD_ACTIVE) { /* transfer is pending */ goto done; } while (1) { usb_pc_cpu_invalidate(td->page_cache); status = hc32toh(sc, td->qtd_status); /* * Check if there is an active TD which * indicates that the transfer isn't done. */ if (status & EHCI_QTD_ACTIVE) { /* update cache */ xfer->td_transfer_cache = td; goto done; } /* * last transfer descriptor makes the transfer done */ if (((void *)td) == xfer->td_transfer_last) { break; } /* * any kind of error makes the transfer done */ if (status & EHCI_QTD_HALTED) { break; } /* * if there is no alternate next transfer, a short * packet also makes the transfer done */ if (EHCI_QTD_GET_BYTES(status)) { if (xfer->flags_int.short_frames_ok) { /* follow alt next */ if (td->alt_next) { td = td->alt_next; continue; } } /* transfer is done */ break; } td = td->obj_next; } ehci_non_isoc_done(xfer); goto transferred; } done: DPRINTFN(13, "xfer=%p is still active\n", xfer); return (0); transferred: return (1); } static void ehci_pcd_enable(ehci_softc_t *sc) { USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); sc->sc_eintrs |= EHCI_STS_PCD; EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs); /* acknowledge any PCD interrupt */ EOWRITE4(sc, EHCI_USBSTS, EHCI_STS_PCD); ehci_root_intr(sc); } static void ehci_interrupt_poll(ehci_softc_t *sc) { struct usb_xfer *xfer; repeat: TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { /* * check if transfer is transferred */ if (ehci_check_transfer(xfer)) { /* queue has been modified */ goto repeat; } } } /* * Some EHCI chips from VIA / ATI seem to trigger interrupts before * writing back the qTD status, or miss signalling occasionally under * heavy load. If the host machine is too fast, we can miss * transaction completion - when we scan the active list the * transaction still seems to be active. This generally exhibits * itself as a umass stall that never recovers. * * We work around this behaviour by setting up this callback after any * softintr that completes with transactions still pending, giving us * another chance to check for completion after the writeback has * taken place. */ static void ehci_poll_timeout(void *arg) { ehci_softc_t *sc = arg; DPRINTFN(3, "\n"); ehci_interrupt_poll(sc); } /*------------------------------------------------------------------------* * ehci_interrupt - EHCI interrupt handler * * NOTE: Do not access "sc->sc_bus.bdev" inside the interrupt handler, * hence the interrupt handler will be setup before "sc->sc_bus.bdev" * is present ! *------------------------------------------------------------------------*/ void ehci_interrupt(ehci_softc_t *sc) { uint32_t status; USB_BUS_LOCK(&sc->sc_bus); DPRINTFN(16, "real interrupt\n"); #ifdef USB_DEBUG if (ehcidebug > 15) { ehci_dump_regs(sc); } #endif status = EHCI_STS_INTRS(EOREAD4(sc, EHCI_USBSTS)); if (status == 0) { /* the interrupt was not for us */ goto done; } if (!(status & sc->sc_eintrs)) { goto done; } EOWRITE4(sc, EHCI_USBSTS, status); /* acknowledge */ status &= sc->sc_eintrs; if (status & EHCI_STS_HSE) { printf("%s: unrecoverable error, " "controller halted\n", __FUNCTION__); #ifdef USB_DEBUG ehci_dump_regs(sc); ehci_dump_isoc(sc); #endif } if (status & EHCI_STS_PCD) { /* * Disable PCD interrupt for now, because it will be * on until the port has been reset. */ sc->sc_eintrs &= ~EHCI_STS_PCD; EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs); ehci_root_intr(sc); /* do not allow RHSC interrupts > 1 per second */ usb_callout_reset(&sc->sc_tmo_pcd, hz, (void *)&ehci_pcd_enable, sc); } status &= ~(EHCI_STS_INT | EHCI_STS_ERRINT | EHCI_STS_PCD | EHCI_STS_IAA); if (status != 0) { /* block unprocessed interrupts */ sc->sc_eintrs &= ~status; EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs); printf("%s: blocking interrupts 0x%x\n", __FUNCTION__, status); } /* poll all the USB transfers */ ehci_interrupt_poll(sc); if (sc->sc_flags & EHCI_SCFLG_LOSTINTRBUG) { usb_callout_reset(&sc->sc_tmo_poll, hz / 128, (void *)&ehci_poll_timeout, sc); } done: USB_BUS_UNLOCK(&sc->sc_bus); } /* * called when a request does not complete */ static void ehci_timeout(void *arg) { struct usb_xfer *xfer = arg; DPRINTF("xfer=%p\n", xfer); USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED); /* transfer is transferred */ ehci_device_done(xfer, USB_ERR_TIMEOUT); } static void ehci_do_poll(struct usb_bus *bus) { ehci_softc_t *sc = EHCI_BUS2SC(bus); USB_BUS_LOCK(&sc->sc_bus); ehci_interrupt_poll(sc); USB_BUS_UNLOCK(&sc->sc_bus); } static void ehci_setup_standard_chain_sub(struct ehci_std_temp *temp) { struct usb_page_search buf_res; ehci_qtd_t *td; ehci_qtd_t *td_next; ehci_qtd_t *td_alt_next; uint32_t buf_offset; uint32_t average; uint32_t len_old; uint32_t terminate; uint32_t qtd_altnext; uint8_t shortpkt_old; uint8_t precompute; terminate = temp->sc->sc_terminate_self; qtd_altnext = temp->sc->sc_terminate_self; td_alt_next = NULL; buf_offset = 0; shortpkt_old = temp->shortpkt; len_old = temp->len; precompute = 1; restart: td = temp->td; td_next = temp->td_next; while (1) { if (temp->len == 0) { if (temp->shortpkt) { break; } /* send a Zero Length Packet, ZLP, last */ temp->shortpkt = 1; average = 0; } else { average = temp->average; if (temp->len < average) { if (temp->len % temp->max_frame_size) { temp->shortpkt = 1; } average = temp->len; } } if (td_next == NULL) { panic("%s: out of EHCI transfer descriptors!", __FUNCTION__); } /* get next TD */ td = td_next; td_next = td->obj_next; /* check if we are pre-computing */ if (precompute) { /* update remaining length */ temp->len -= average; continue; } /* fill out current TD */ td->qtd_status = temp->qtd_status | htohc32(temp->sc, EHCI_QTD_IOC | EHCI_QTD_SET_BYTES(average)); if (average == 0) { if (temp->auto_data_toggle == 0) { /* update data toggle, ZLP case */ temp->qtd_status ^= htohc32(temp->sc, EHCI_QTD_TOGGLE_MASK); } td->len = 0; td->qtd_buffer[0] = 0; td->qtd_buffer_hi[0] = 0; td->qtd_buffer[1] = 0; td->qtd_buffer_hi[1] = 0; } else { uint8_t x; if (temp->auto_data_toggle == 0) { /* update data toggle */ if (((average + temp->max_frame_size - 1) / temp->max_frame_size) & 1) { temp->qtd_status ^= htohc32(temp->sc, EHCI_QTD_TOGGLE_MASK); } } td->len = average; /* update remaining length */ temp->len -= average; /* fill out buffer pointers */ usbd_get_page(temp->pc, buf_offset, &buf_res); td->qtd_buffer[0] = htohc32(temp->sc, buf_res.physaddr); td->qtd_buffer_hi[0] = 0; x = 1; while (average > EHCI_PAGE_SIZE) { average -= EHCI_PAGE_SIZE; buf_offset += EHCI_PAGE_SIZE; usbd_get_page(temp->pc, buf_offset, &buf_res); td->qtd_buffer[x] = htohc32(temp->sc, buf_res.physaddr & (~0xFFF)); td->qtd_buffer_hi[x] = 0; x++; } /* * NOTE: The "average" variable is never zero after * exiting the loop above ! * * NOTE: We have to subtract one from the offset to * ensure that we are computing the physical address * of a valid page ! */ buf_offset += average; usbd_get_page(temp->pc, buf_offset - 1, &buf_res); td->qtd_buffer[x] = htohc32(temp->sc, buf_res.physaddr & (~0xFFF)); td->qtd_buffer_hi[x] = 0; } if (td_next) { /* link the current TD with the next one */ td->qtd_next = td_next->qtd_self; } td->qtd_altnext = qtd_altnext; td->alt_next = td_alt_next; usb_pc_cpu_flush(td->page_cache); } if (precompute) { precompute = 0; /* setup alt next pointer, if any */ if (temp->last_frame) { td_alt_next = NULL; qtd_altnext = terminate; } else { /* we use this field internally */ td_alt_next = td_next; if (temp->setup_alt_next) { qtd_altnext = td_next->qtd_self; } else { qtd_altnext = terminate; } } /* restore */ temp->shortpkt = shortpkt_old; temp->len = len_old; goto restart; } temp->td = td; temp->td_next = td_next; } static void ehci_setup_standard_chain(struct usb_xfer *xfer, ehci_qh_t **qh_last) { struct ehci_std_temp temp; struct usb_pipe_methods *methods; ehci_qh_t *qh; ehci_qtd_t *td; uint32_t qh_endp; uint32_t qh_endphub; uint32_t x; DPRINTFN(9, "addr=%d endpt=%d sumlen=%d speed=%d\n", xfer->address, UE_GET_ADDR(xfer->endpointno), xfer->sumlen, usbd_get_speed(xfer->xroot->udev)); temp.average = xfer->max_hc_frame_size; temp.max_frame_size = xfer->max_frame_size; temp.sc = EHCI_BUS2SC(xfer->xroot->bus); /* toggle the DMA set we are using */ xfer->flags_int.curr_dma_set ^= 1; /* get next DMA set */ td = xfer->td_start[xfer->flags_int.curr_dma_set]; xfer->td_transfer_first = td; xfer->td_transfer_cache = td; temp.td = NULL; temp.td_next = td; temp.qtd_status = 0; temp.last_frame = 0; temp.setup_alt_next = xfer->flags_int.short_frames_ok; if (xfer->flags_int.control_xfr) { if (xfer->endpoint->toggle_next) { /* DATA1 is next */ temp.qtd_status |= htohc32(temp.sc, EHCI_QTD_SET_TOGGLE(1)); } temp.auto_data_toggle = 0; } else { temp.auto_data_toggle = 1; } if ((xfer->xroot->udev->parent_hs_hub != NULL) || (xfer->xroot->udev->address != 0)) { /* max 3 retries */ temp.qtd_status |= htohc32(temp.sc, EHCI_QTD_SET_CERR(3)); } /* check if we should prepend a setup message */ if (xfer->flags_int.control_xfr) { if (xfer->flags_int.control_hdr) { xfer->endpoint->toggle_next = 0; temp.qtd_status &= htohc32(temp.sc, EHCI_QTD_SET_CERR(3)); temp.qtd_status |= htohc32(temp.sc, EHCI_QTD_ACTIVE | EHCI_QTD_SET_PID(EHCI_QTD_PID_SETUP) | EHCI_QTD_SET_TOGGLE(0)); temp.len = xfer->frlengths[0]; temp.pc = xfer->frbuffers + 0; temp.shortpkt = temp.len ? 1 : 0; /* check for last frame */ if (xfer->nframes == 1) { /* no STATUS stage yet, SETUP is last */ if (xfer->flags_int.control_act) { temp.last_frame = 1; temp.setup_alt_next = 0; } } ehci_setup_standard_chain_sub(&temp); } x = 1; } else { x = 0; } while (x != xfer->nframes) { /* DATA0 / DATA1 message */ temp.len = xfer->frlengths[x]; temp.pc = xfer->frbuffers + x; x++; if (x == xfer->nframes) { if (xfer->flags_int.control_xfr) { /* no STATUS stage yet, DATA is last */ if (xfer->flags_int.control_act) { temp.last_frame = 1; temp.setup_alt_next = 0; } } else { temp.last_frame = 1; temp.setup_alt_next = 0; } } /* keep previous data toggle and error count */ temp.qtd_status &= htohc32(temp.sc, EHCI_QTD_SET_CERR(3) | EHCI_QTD_SET_TOGGLE(1)); if (temp.len == 0) { /* make sure that we send an USB packet */ temp.shortpkt = 0; } else { /* regular data transfer */ temp.shortpkt = (xfer->flags.force_short_xfer) ? 0 : 1; } /* set endpoint direction */ temp.qtd_status |= (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) ? htohc32(temp.sc, EHCI_QTD_ACTIVE | EHCI_QTD_SET_PID(EHCI_QTD_PID_IN)) : htohc32(temp.sc, EHCI_QTD_ACTIVE | EHCI_QTD_SET_PID(EHCI_QTD_PID_OUT)); ehci_setup_standard_chain_sub(&temp); } /* check if we should append a status stage */ if (xfer->flags_int.control_xfr && !xfer->flags_int.control_act) { /* * Send a DATA1 message and invert the current endpoint * direction. */ temp.qtd_status &= htohc32(temp.sc, EHCI_QTD_SET_CERR(3) | EHCI_QTD_SET_TOGGLE(1)); temp.qtd_status |= (UE_GET_DIR(xfer->endpointno) == UE_DIR_OUT) ? htohc32(temp.sc, EHCI_QTD_ACTIVE | EHCI_QTD_SET_PID(EHCI_QTD_PID_IN) | EHCI_QTD_SET_TOGGLE(1)) : htohc32(temp.sc, EHCI_QTD_ACTIVE | EHCI_QTD_SET_PID(EHCI_QTD_PID_OUT) | EHCI_QTD_SET_TOGGLE(1)); temp.len = 0; temp.pc = NULL; temp.shortpkt = 0; temp.last_frame = 1; temp.setup_alt_next = 0; ehci_setup_standard_chain_sub(&temp); } td = temp.td; /* the last TD terminates the transfer: */ td->qtd_next = htohc32(temp.sc, EHCI_LINK_TERMINATE); td->qtd_altnext = htohc32(temp.sc, EHCI_LINK_TERMINATE); usb_pc_cpu_flush(td->page_cache); /* must have at least one frame! */ xfer->td_transfer_last = td; #ifdef USB_DEBUG if (ehcidebug > 8) { DPRINTF("nexttog=%d; data before transfer:\n", xfer->endpoint->toggle_next); ehci_dump_sqtds(temp.sc, xfer->td_transfer_first); } #endif methods = xfer->endpoint->methods; qh = xfer->qh_start[xfer->flags_int.curr_dma_set]; /* the "qh_link" field is filled when the QH is added */ qh_endp = (EHCI_QH_SET_ADDR(xfer->address) | EHCI_QH_SET_ENDPT(UE_GET_ADDR(xfer->endpointno)) | EHCI_QH_SET_MPL(xfer->max_packet_size)); if (usbd_get_speed(xfer->xroot->udev) == USB_SPEED_HIGH) { qh_endp |= EHCI_QH_SET_EPS(EHCI_QH_SPEED_HIGH); if (methods != &ehci_device_intr_methods) qh_endp |= EHCI_QH_SET_NRL(8); } else { if (usbd_get_speed(xfer->xroot->udev) == USB_SPEED_FULL) { qh_endp |= EHCI_QH_SET_EPS(EHCI_QH_SPEED_FULL); } else { qh_endp |= EHCI_QH_SET_EPS(EHCI_QH_SPEED_LOW); } if (methods == &ehci_device_ctrl_methods) { qh_endp |= EHCI_QH_CTL; } if (methods != &ehci_device_intr_methods) { /* Only try one time per microframe! */ qh_endp |= EHCI_QH_SET_NRL(1); } } if (temp.auto_data_toggle == 0) { /* software computes the data toggle */ qh_endp |= EHCI_QH_DTC; } qh->qh_endp = htohc32(temp.sc, qh_endp); qh_endphub = (EHCI_QH_SET_MULT(xfer->max_packet_count & 3) | EHCI_QH_SET_CMASK(xfer->endpoint->usb_cmask) | EHCI_QH_SET_SMASK(xfer->endpoint->usb_smask) | EHCI_QH_SET_HUBA(xfer->xroot->udev->hs_hub_addr) | EHCI_QH_SET_PORT(xfer->xroot->udev->hs_port_no)); qh->qh_endphub = htohc32(temp.sc, qh_endphub); qh->qh_curqtd = 0; /* fill the overlay qTD */ if (temp.auto_data_toggle && xfer->endpoint->toggle_next) { /* DATA1 is next */ qh->qh_qtd.qtd_status = htohc32(temp.sc, EHCI_QTD_SET_TOGGLE(1)); } else { qh->qh_qtd.qtd_status = 0; } td = xfer->td_transfer_first; qh->qh_qtd.qtd_next = td->qtd_self; qh->qh_qtd.qtd_altnext = htohc32(temp.sc, EHCI_LINK_TERMINATE); usb_pc_cpu_flush(qh->page_cache); if (xfer->xroot->udev->flags.self_suspended == 0) { EHCI_APPEND_QH(qh, *qh_last); } } static void ehci_root_intr(ehci_softc_t *sc) { uint16_t i; uint16_t m; USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); /* clear any old interrupt data */ memset(sc->sc_hub_idata, 0, sizeof(sc->sc_hub_idata)); /* set bits */ m = (sc->sc_noport + 1); if (m > (8 * sizeof(sc->sc_hub_idata))) { m = (8 * sizeof(sc->sc_hub_idata)); } for (i = 1; i < m; i++) { /* pick out CHANGE bits from the status register */ if (EOREAD4(sc, EHCI_PORTSC(i)) & EHCI_PS_CLEAR) { sc->sc_hub_idata[i / 8] |= 1 << (i % 8); DPRINTF("port %d changed\n", i); } } uhub_root_intr(&sc->sc_bus, sc->sc_hub_idata, sizeof(sc->sc_hub_idata)); } static void ehci_isoc_fs_done(ehci_softc_t *sc, struct usb_xfer *xfer) { uint32_t nframes = xfer->nframes; uint32_t status; uint32_t *plen = xfer->frlengths; uint16_t len = 0; ehci_sitd_t *td = xfer->td_transfer_first; ehci_sitd_t **pp_last = &sc->sc_isoc_fs_p_last[xfer->qh_pos]; DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n", xfer, xfer->endpoint); while (nframes--) { if (td == NULL) { panic("%s:%d: out of TD's\n", __FUNCTION__, __LINE__); } if (pp_last >= &sc->sc_isoc_fs_p_last[EHCI_VIRTUAL_FRAMELIST_COUNT]) { pp_last = &sc->sc_isoc_fs_p_last[0]; } #ifdef USB_DEBUG if (ehcidebug > 15) { DPRINTF("isoc FS-TD\n"); ehci_dump_sitd(sc, td); } #endif usb_pc_cpu_invalidate(td->page_cache); status = hc32toh(sc, td->sitd_status); len = EHCI_SITD_GET_LEN(status); DPRINTFN(2, "status=0x%08x, rem=%u\n", status, len); if (*plen >= len) { len = *plen - len; } else { len = 0; } *plen = len; /* remove FS-TD from schedule */ EHCI_REMOVE_FS_TD(td, *pp_last); pp_last++; plen++; td = td->obj_next; } xfer->aframes = xfer->nframes; } static void ehci_isoc_hs_done(ehci_softc_t *sc, struct usb_xfer *xfer) { uint32_t nframes = xfer->nframes; uint32_t status; uint32_t *plen = xfer->frlengths; uint16_t len = 0; uint8_t td_no = 0; ehci_itd_t *td = xfer->td_transfer_first; ehci_itd_t **pp_last = &sc->sc_isoc_hs_p_last[xfer->qh_pos]; DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n", xfer, xfer->endpoint); while (nframes) { if (td == NULL) { panic("%s:%d: out of TD's\n", __FUNCTION__, __LINE__); } if (pp_last >= &sc->sc_isoc_hs_p_last[EHCI_VIRTUAL_FRAMELIST_COUNT]) { pp_last = &sc->sc_isoc_hs_p_last[0]; } #ifdef USB_DEBUG if (ehcidebug > 15) { DPRINTF("isoc HS-TD\n"); ehci_dump_itd(sc, td); } #endif usb_pc_cpu_invalidate(td->page_cache); status = hc32toh(sc, td->itd_status[td_no]); len = EHCI_ITD_GET_LEN(status); DPRINTFN(2, "status=0x%08x, len=%u\n", status, len); if (xfer->endpoint->usb_smask & (1 << td_no)) { if (*plen >= len) { /* * The length is valid. NOTE: The * complete length is written back * into the status field, and not the * remainder like with other transfer * descriptor types. */ } else { /* Invalid length - truncate */ len = 0; } *plen = len; plen++; nframes--; } td_no++; if ((td_no == 8) || (nframes == 0)) { /* remove HS-TD from schedule */ EHCI_REMOVE_HS_TD(td, *pp_last); pp_last++; td_no = 0; td = td->obj_next; } } xfer->aframes = xfer->nframes; } /* NOTE: "done" can be run two times in a row, * from close and from interrupt */ static void ehci_device_done(struct usb_xfer *xfer, usb_error_t error) { struct usb_pipe_methods *methods = xfer->endpoint->methods; ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); DPRINTFN(2, "xfer=%p, endpoint=%p, error=%d\n", xfer, xfer->endpoint, error); if ((methods == &ehci_device_bulk_methods) || (methods == &ehci_device_ctrl_methods)) { #ifdef USB_DEBUG if (ehcidebug > 8) { DPRINTF("nexttog=%d; data after transfer:\n", xfer->endpoint->toggle_next); ehci_dump_sqtds(sc, xfer->td_transfer_first); } #endif EHCI_REMOVE_QH(xfer->qh_start[xfer->flags_int.curr_dma_set], sc->sc_async_p_last); } if (methods == &ehci_device_intr_methods) { EHCI_REMOVE_QH(xfer->qh_start[xfer->flags_int.curr_dma_set], sc->sc_intr_p_last[xfer->qh_pos]); } /* * Only finish isochronous transfers once which will update * "xfer->frlengths". */ if (xfer->td_transfer_first && xfer->td_transfer_last) { if (methods == &ehci_device_isoc_fs_methods) { ehci_isoc_fs_done(sc, xfer); } if (methods == &ehci_device_isoc_hs_methods) { ehci_isoc_hs_done(sc, xfer); } xfer->td_transfer_first = NULL; xfer->td_transfer_last = NULL; } /* dequeue transfer and start next transfer */ usbd_transfer_done(xfer, error); } /*------------------------------------------------------------------------* * ehci bulk support *------------------------------------------------------------------------*/ static void ehci_device_bulk_open(struct usb_xfer *xfer) { return; } static void ehci_device_bulk_close(struct usb_xfer *xfer) { ehci_device_done(xfer, USB_ERR_CANCELLED); } static void ehci_device_bulk_enter(struct usb_xfer *xfer) { return; } static void ehci_device_bulk_start(struct usb_xfer *xfer) { ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); uint32_t temp; /* setup TD's and QH */ ehci_setup_standard_chain(xfer, &sc->sc_async_p_last); /* put transfer on interrupt queue */ ehci_transfer_intr_enqueue(xfer); /* * XXX Certain nVidia chipsets choke when using the IAAD * feature too frequently. */ if (sc->sc_flags & EHCI_SCFLG_IAADBUG) return; /* XXX Performance quirk: Some Host Controllers have a too low * interrupt rate. Issue an IAAD to stimulate the Host * Controller after queueing the BULK transfer. */ temp = EOREAD4(sc, EHCI_USBCMD); if (!(temp & EHCI_CMD_IAAD)) EOWRITE4(sc, EHCI_USBCMD, temp | EHCI_CMD_IAAD); } struct usb_pipe_methods ehci_device_bulk_methods = { .open = ehci_device_bulk_open, .close = ehci_device_bulk_close, .enter = ehci_device_bulk_enter, .start = ehci_device_bulk_start, }; /*------------------------------------------------------------------------* * ehci control support *------------------------------------------------------------------------*/ static void ehci_device_ctrl_open(struct usb_xfer *xfer) { return; } static void ehci_device_ctrl_close(struct usb_xfer *xfer) { ehci_device_done(xfer, USB_ERR_CANCELLED); } static void ehci_device_ctrl_enter(struct usb_xfer *xfer) { return; } static void ehci_device_ctrl_start(struct usb_xfer *xfer) { ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); /* setup TD's and QH */ ehci_setup_standard_chain(xfer, &sc->sc_async_p_last); /* put transfer on interrupt queue */ ehci_transfer_intr_enqueue(xfer); } struct usb_pipe_methods ehci_device_ctrl_methods = { .open = ehci_device_ctrl_open, .close = ehci_device_ctrl_close, .enter = ehci_device_ctrl_enter, .start = ehci_device_ctrl_start, }; /*------------------------------------------------------------------------* * ehci interrupt support *------------------------------------------------------------------------*/ static void ehci_device_intr_open(struct usb_xfer *xfer) { ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); uint16_t best; uint16_t bit; uint16_t x; usb_hs_bandwidth_alloc(xfer); /* * Find the best QH position corresponding to the given interval: */ best = 0; bit = EHCI_VIRTUAL_FRAMELIST_COUNT / 2; while (bit) { if (xfer->interval >= bit) { x = bit; best = bit; while (x & bit) { if (sc->sc_intr_stat[x] < sc->sc_intr_stat[best]) { best = x; } x++; } break; } bit >>= 1; } sc->sc_intr_stat[best]++; xfer->qh_pos = best; DPRINTFN(3, "best=%d interval=%d\n", best, xfer->interval); } static void ehci_device_intr_close(struct usb_xfer *xfer) { ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); sc->sc_intr_stat[xfer->qh_pos]--; ehci_device_done(xfer, USB_ERR_CANCELLED); /* bandwidth must be freed after device done */ usb_hs_bandwidth_free(xfer); } static void ehci_device_intr_enter(struct usb_xfer *xfer) { return; } static void ehci_device_intr_start(struct usb_xfer *xfer) { ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); /* setup TD's and QH */ ehci_setup_standard_chain(xfer, &sc->sc_intr_p_last[xfer->qh_pos]); /* put transfer on interrupt queue */ ehci_transfer_intr_enqueue(xfer); } struct usb_pipe_methods ehci_device_intr_methods = { .open = ehci_device_intr_open, .close = ehci_device_intr_close, .enter = ehci_device_intr_enter, .start = ehci_device_intr_start, }; /*------------------------------------------------------------------------* * ehci full speed isochronous support *------------------------------------------------------------------------*/ static void ehci_device_isoc_fs_open(struct usb_xfer *xfer) { ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); ehci_sitd_t *td; uint32_t sitd_portaddr; uint8_t ds; sitd_portaddr = EHCI_SITD_SET_ADDR(xfer->address) | EHCI_SITD_SET_ENDPT(UE_GET_ADDR(xfer->endpointno)) | EHCI_SITD_SET_HUBA(xfer->xroot->udev->hs_hub_addr) | EHCI_SITD_SET_PORT(xfer->xroot->udev->hs_port_no); if (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) sitd_portaddr |= EHCI_SITD_SET_DIR_IN; sitd_portaddr = htohc32(sc, sitd_portaddr); /* initialize all TD's */ for (ds = 0; ds != 2; ds++) { for (td = xfer->td_start[ds]; td; td = td->obj_next) { td->sitd_portaddr = sitd_portaddr; /* * TODO: make some kind of automatic * SMASK/CMASK selection based on micro-frame * usage * * micro-frame usage (8 microframes per 1ms) */ td->sitd_back = htohc32(sc, EHCI_LINK_TERMINATE); usb_pc_cpu_flush(td->page_cache); } } } static void ehci_device_isoc_fs_close(struct usb_xfer *xfer) { ehci_device_done(xfer, USB_ERR_CANCELLED); } static void ehci_device_isoc_fs_enter(struct usb_xfer *xfer) { struct usb_page_search buf_res; ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); ehci_sitd_t *td; ehci_sitd_t *td_last = NULL; ehci_sitd_t **pp_last; uint32_t *plen; uint32_t buf_offset; uint32_t nframes; uint32_t temp; uint32_t sitd_mask; uint16_t tlen; uint8_t sa; uint8_t sb; #ifdef USB_DEBUG uint8_t once = 1; #endif DPRINTFN(6, "xfer=%p next=%d nframes=%d\n", xfer, xfer->endpoint->isoc_next, xfer->nframes); /* get the current frame index */ nframes = EOREAD4(sc, EHCI_FRINDEX) / 8; /* * check if the frame index is within the window where the frames * will be inserted */ buf_offset = (nframes - xfer->endpoint->isoc_next) & (EHCI_VIRTUAL_FRAMELIST_COUNT - 1); if ((xfer->endpoint->is_synced == 0) || (buf_offset < xfer->nframes)) { /* * If there is data underflow or the pipe queue is empty we * schedule the transfer a few frames ahead of the current * frame position. Else two isochronous transfers might * overlap. */ xfer->endpoint->isoc_next = (nframes + 3) & (EHCI_VIRTUAL_FRAMELIST_COUNT - 1); xfer->endpoint->is_synced = 1; DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next); } /* * compute how many milliseconds the insertion is ahead of the * current frame position: */ buf_offset = (xfer->endpoint->isoc_next - nframes) & (EHCI_VIRTUAL_FRAMELIST_COUNT - 1); /* * pre-compute when the isochronous transfer will be finished: */ xfer->isoc_time_complete = usb_isoc_time_expand(&sc->sc_bus, nframes) + buf_offset + xfer->nframes; /* get the real number of frames */ nframes = xfer->nframes; buf_offset = 0; plen = xfer->frlengths; /* toggle the DMA set we are using */ xfer->flags_int.curr_dma_set ^= 1; /* get next DMA set */ td = xfer->td_start[xfer->flags_int.curr_dma_set]; xfer->td_transfer_first = td; pp_last = &sc->sc_isoc_fs_p_last[xfer->endpoint->isoc_next]; /* store starting position */ xfer->qh_pos = xfer->endpoint->isoc_next; while (nframes--) { if (td == NULL) { panic("%s:%d: out of TD's\n", __FUNCTION__, __LINE__); } if (pp_last >= &sc->sc_isoc_fs_p_last[EHCI_VIRTUAL_FRAMELIST_COUNT]) pp_last = &sc->sc_isoc_fs_p_last[0]; /* reuse sitd_portaddr and sitd_back from last transfer */ if (*plen > xfer->max_frame_size) { #ifdef USB_DEBUG if (once) { once = 0; printf("%s: frame length(%d) exceeds %d " "bytes (frame truncated)\n", __FUNCTION__, *plen, xfer->max_frame_size); } #endif *plen = xfer->max_frame_size; } /* allocate a slot */ sa = usbd_fs_isoc_schedule_alloc_slot(xfer, xfer->isoc_time_complete - nframes - 1); if (sa == 255) { /* * Schedule is FULL, set length to zero: */ *plen = 0; sa = USB_FS_ISOC_UFRAME_MAX - 1; } if (*plen) { /* * only call "usbd_get_page()" when we have a * non-zero length */ usbd_get_page(xfer->frbuffers, buf_offset, &buf_res); td->sitd_bp[0] = htohc32(sc, buf_res.physaddr); buf_offset += *plen; /* * NOTE: We need to subtract one from the offset so * that we are on a valid page! */ usbd_get_page(xfer->frbuffers, buf_offset - 1, &buf_res); temp = buf_res.physaddr & ~0xFFF; } else { td->sitd_bp[0] = 0; temp = 0; } if (UE_GET_DIR(xfer->endpointno) == UE_DIR_OUT) { tlen = *plen; if (tlen <= 188) { temp |= 1; /* T-count = 1, TP = ALL */ tlen = 1; } else { tlen += 187; tlen /= 188; temp |= tlen; /* T-count = [1..6] */ temp |= 8; /* TP = Begin */ } tlen += sa; if (tlen >= 8) { sb = 0; } else { sb = (1 << tlen); } sa = (1 << sa); sa = (sb - sa) & 0x3F; sb = 0; } else { sb = (-(4 << sa)) & 0xFE; sa = (1 << sa) & 0x3F; } sitd_mask = (EHCI_SITD_SET_SMASK(sa) | EHCI_SITD_SET_CMASK(sb)); td->sitd_bp[1] = htohc32(sc, temp); td->sitd_mask = htohc32(sc, sitd_mask); if (nframes == 0) { td->sitd_status = htohc32(sc, EHCI_SITD_IOC | EHCI_SITD_ACTIVE | EHCI_SITD_SET_LEN(*plen)); } else { td->sitd_status = htohc32(sc, EHCI_SITD_ACTIVE | EHCI_SITD_SET_LEN(*plen)); } usb_pc_cpu_flush(td->page_cache); #ifdef USB_DEBUG if (ehcidebug > 15) { DPRINTF("FS-TD %d\n", nframes); ehci_dump_sitd(sc, td); } #endif /* insert TD into schedule */ EHCI_APPEND_FS_TD(td, *pp_last); pp_last++; plen++; td_last = td; td = td->obj_next; } xfer->td_transfer_last = td_last; /* update isoc_next */ xfer->endpoint->isoc_next = (pp_last - &sc->sc_isoc_fs_p_last[0]) & (EHCI_VIRTUAL_FRAMELIST_COUNT - 1); /* * We don't allow cancelling of the SPLIT transaction USB FULL * speed transfer, because it disturbs the bandwidth * computation algorithm. */ xfer->flags_int.can_cancel_immed = 0; } static void ehci_device_isoc_fs_start(struct usb_xfer *xfer) { /* * We don't allow cancelling of the SPLIT transaction USB FULL * speed transfer, because it disturbs the bandwidth * computation algorithm. */ xfer->flags_int.can_cancel_immed = 0; /* set a default timeout */ if (xfer->timeout == 0) xfer->timeout = 500; /* ms */ /* put transfer on interrupt queue */ ehci_transfer_intr_enqueue(xfer); } struct usb_pipe_methods ehci_device_isoc_fs_methods = { .open = ehci_device_isoc_fs_open, .close = ehci_device_isoc_fs_close, .enter = ehci_device_isoc_fs_enter, .start = ehci_device_isoc_fs_start, }; /*------------------------------------------------------------------------* * ehci high speed isochronous support *------------------------------------------------------------------------*/ static void ehci_device_isoc_hs_open(struct usb_xfer *xfer) { ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); ehci_itd_t *td; uint32_t temp; uint8_t ds; usb_hs_bandwidth_alloc(xfer); /* initialize all TD's */ for (ds = 0; ds != 2; ds++) { for (td = xfer->td_start[ds]; td; td = td->obj_next) { /* set TD inactive */ td->itd_status[0] = 0; td->itd_status[1] = 0; td->itd_status[2] = 0; td->itd_status[3] = 0; td->itd_status[4] = 0; td->itd_status[5] = 0; td->itd_status[6] = 0; td->itd_status[7] = 0; /* set endpoint and address */ td->itd_bp[0] = htohc32(sc, EHCI_ITD_SET_ADDR(xfer->address) | EHCI_ITD_SET_ENDPT(UE_GET_ADDR(xfer->endpointno))); temp = EHCI_ITD_SET_MPL(xfer->max_packet_size & 0x7FF); /* set direction */ if (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) { temp |= EHCI_ITD_SET_DIR_IN; } /* set maximum packet size */ td->itd_bp[1] = htohc32(sc, temp); /* set transfer multiplier */ td->itd_bp[2] = htohc32(sc, xfer->max_packet_count & 3); usb_pc_cpu_flush(td->page_cache); } } } static void ehci_device_isoc_hs_close(struct usb_xfer *xfer) { ehci_device_done(xfer, USB_ERR_CANCELLED); /* bandwidth must be freed after device done */ usb_hs_bandwidth_free(xfer); } static void ehci_device_isoc_hs_enter(struct usb_xfer *xfer) { struct usb_page_search buf_res; ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus); ehci_itd_t *td; ehci_itd_t *td_last = NULL; ehci_itd_t **pp_last; bus_size_t page_addr; uint32_t *plen; uint32_t status; uint32_t buf_offset; uint32_t nframes; uint32_t itd_offset[8 + 1]; uint8_t x; uint8_t td_no; uint8_t page_no; uint8_t shift = usbd_xfer_get_fps_shift(xfer); #ifdef USB_DEBUG uint8_t once = 1; #endif DPRINTFN(6, "xfer=%p next=%d nframes=%d shift=%d\n", xfer, xfer->endpoint->isoc_next, xfer->nframes, (int)shift); /* get the current frame index */ nframes = EOREAD4(sc, EHCI_FRINDEX) / 8; /* * check if the frame index is within the window where the frames * will be inserted */ buf_offset = (nframes - xfer->endpoint->isoc_next) & (EHCI_VIRTUAL_FRAMELIST_COUNT - 1); if ((xfer->endpoint->is_synced == 0) || (buf_offset < (((xfer->nframes << shift) + 7) / 8))) { /* * If there is data underflow or the pipe queue is empty we * schedule the transfer a few frames ahead of the current * frame position. Else two isochronous transfers might * overlap. */ xfer->endpoint->isoc_next = (nframes + 3) & (EHCI_VIRTUAL_FRAMELIST_COUNT - 1); xfer->endpoint->is_synced = 1; DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next); } /* * compute how many milliseconds the insertion is ahead of the * current frame position: */ buf_offset = (xfer->endpoint->isoc_next - nframes) & (EHCI_VIRTUAL_FRAMELIST_COUNT - 1); /* * pre-compute when the isochronous transfer will be finished: */ xfer->isoc_time_complete = usb_isoc_time_expand(&sc->sc_bus, nframes) + buf_offset + (((xfer->nframes << shift) + 7) / 8); /* get the real number of frames */ nframes = xfer->nframes; buf_offset = 0; td_no = 0; plen = xfer->frlengths; /* toggle the DMA set we are using */ xfer->flags_int.curr_dma_set ^= 1; /* get next DMA set */ td = xfer->td_start[xfer->flags_int.curr_dma_set]; xfer->td_transfer_first = td; pp_last = &sc->sc_isoc_hs_p_last[xfer->endpoint->isoc_next]; /* store starting position */ xfer->qh_pos = xfer->endpoint->isoc_next; while (nframes) { if (td == NULL) { panic("%s:%d: out of TD's\n", __FUNCTION__, __LINE__); } if (pp_last >= &sc->sc_isoc_hs_p_last[EHCI_VIRTUAL_FRAMELIST_COUNT]) { pp_last = &sc->sc_isoc_hs_p_last[0]; } /* range check */ if (*plen > xfer->max_frame_size) { #ifdef USB_DEBUG if (once) { once = 0; printf("%s: frame length(%d) exceeds %d bytes " "(frame truncated)\n", __FUNCTION__, *plen, xfer->max_frame_size); } #endif *plen = xfer->max_frame_size; } if (xfer->endpoint->usb_smask & (1 << td_no)) { status = (EHCI_ITD_SET_LEN(*plen) | EHCI_ITD_ACTIVE | EHCI_ITD_SET_PG(0)); td->itd_status[td_no] = htohc32(sc, status); itd_offset[td_no] = buf_offset; buf_offset += *plen; plen++; nframes --; } else { td->itd_status[td_no] = 0; /* not active */ itd_offset[td_no] = buf_offset; } td_no++; if ((td_no == 8) || (nframes == 0)) { /* the rest of the transfers are not active, if any */ for (x = td_no; x != 8; x++) { td->itd_status[x] = 0; /* not active */ } /* check if there is any data to be transferred */ if (itd_offset[0] != buf_offset) { page_no = 0; itd_offset[td_no] = buf_offset; /* get first page offset */ usbd_get_page(xfer->frbuffers, itd_offset[0], &buf_res); /* get page address */ page_addr = buf_res.physaddr & ~0xFFF; /* update page address */ td->itd_bp[0] &= htohc32(sc, 0xFFF); td->itd_bp[0] |= htohc32(sc, page_addr); for (x = 0; x != td_no; x++) { /* set page number and page offset */ status = (EHCI_ITD_SET_PG(page_no) | (buf_res.physaddr & 0xFFF)); td->itd_status[x] |= htohc32(sc, status); /* get next page offset */ if (itd_offset[x + 1] == buf_offset) { /* * We subtract one so that * we don't go off the last * page! */ usbd_get_page(xfer->frbuffers, buf_offset - 1, &buf_res); } else { usbd_get_page(xfer->frbuffers, itd_offset[x + 1], &buf_res); } /* check if we need a new page */ if ((buf_res.physaddr ^ page_addr) & ~0xFFF) { /* new page needed */ page_addr = buf_res.physaddr & ~0xFFF; if (page_no == 6) { panic("%s: too many pages\n", __FUNCTION__); } page_no++; /* update page address */ td->itd_bp[page_no] &= htohc32(sc, 0xFFF); td->itd_bp[page_no] |= htohc32(sc, page_addr); } } } /* set IOC bit if we are complete */ if (nframes == 0) { td->itd_status[td_no - 1] |= htohc32(sc, EHCI_ITD_IOC); } usb_pc_cpu_flush(td->page_cache); #ifdef USB_DEBUG if (ehcidebug > 15) { DPRINTF("HS-TD %d\n", nframes); ehci_dump_itd(sc, td); } #endif /* insert TD into schedule */ EHCI_APPEND_HS_TD(td, *pp_last); pp_last++; td_no = 0; td_last = td; td = td->obj_next; } } xfer->td_transfer_last = td_last; /* update isoc_next */ xfer->endpoint->isoc_next = (pp_last - &sc->sc_isoc_hs_p_last[0]) & (EHCI_VIRTUAL_FRAMELIST_COUNT - 1); } static void ehci_device_isoc_hs_start(struct usb_xfer *xfer) { /* put transfer on interrupt queue */ ehci_transfer_intr_enqueue(xfer); } struct usb_pipe_methods ehci_device_isoc_hs_methods = { .open = ehci_device_isoc_hs_open, .close = ehci_device_isoc_hs_close, .enter = ehci_device_isoc_hs_enter, .start = ehci_device_isoc_hs_start, }; /*------------------------------------------------------------------------* * ehci root control support *------------------------------------------------------------------------* * Simulate a hardware hub by handling all the necessary requests. *------------------------------------------------------------------------*/ static const struct usb_device_descriptor ehci_devd = { sizeof(struct usb_device_descriptor), UDESC_DEVICE, /* type */ {0x00, 0x02}, /* USB version */ UDCLASS_HUB, /* class */ UDSUBCLASS_HUB, /* subclass */ UDPROTO_HSHUBSTT, /* protocol */ 64, /* max packet */ {0}, {0}, {0x00, 0x01}, /* device id */ 1, 2, 0, /* string indicies */ 1 /* # of configurations */ }; static const struct usb_device_qualifier ehci_odevd = { sizeof(struct usb_device_qualifier), UDESC_DEVICE_QUALIFIER, /* type */ {0x00, 0x02}, /* USB version */ UDCLASS_HUB, /* class */ UDSUBCLASS_HUB, /* subclass */ UDPROTO_FSHUB, /* protocol */ 0, /* max packet */ 0, /* # of configurations */ 0 }; static const struct ehci_config_desc ehci_confd = { .confd = { .bLength = sizeof(struct usb_config_descriptor), .bDescriptorType = UDESC_CONFIG, .wTotalLength[0] = sizeof(ehci_confd), .bNumInterface = 1, .bConfigurationValue = 1, .iConfiguration = 0, .bmAttributes = UC_SELF_POWERED, .bMaxPower = 0 /* max power */ }, .ifcd = { .bLength = sizeof(struct usb_interface_descriptor), .bDescriptorType = UDESC_INTERFACE, .bNumEndpoints = 1, .bInterfaceClass = UICLASS_HUB, .bInterfaceSubClass = UISUBCLASS_HUB, .bInterfaceProtocol = 0, }, .endpd = { .bLength = sizeof(struct usb_endpoint_descriptor), .bDescriptorType = UDESC_ENDPOINT, .bEndpointAddress = UE_DIR_IN | EHCI_INTR_ENDPT, .bmAttributes = UE_INTERRUPT, .wMaxPacketSize[0] = 8, /* max packet (63 ports) */ .bInterval = 255, }, }; static const struct usb_hub_descriptor ehci_hubd = { .bDescLength = 0, /* dynamic length */ .bDescriptorType = UDESC_HUB, }; static void ehci_disown(ehci_softc_t *sc, uint16_t index, uint8_t lowspeed) { uint32_t port; uint32_t v; DPRINTF("index=%d lowspeed=%d\n", index, lowspeed); port = EHCI_PORTSC(index); v = EOREAD4(sc, port) & ~EHCI_PS_CLEAR; EOWRITE4(sc, port, v | EHCI_PS_PO); } static usb_error_t ehci_roothub_exec(struct usb_device *udev, struct usb_device_request *req, const void **pptr, uint16_t *plength) { ehci_softc_t *sc = EHCI_BUS2SC(udev->bus); const char *str_ptr; const void *ptr; uint32_t port; uint32_t v; uint16_t len; uint16_t i; uint16_t value; uint16_t index; usb_error_t err; USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); /* buffer reset */ ptr = (const void *)&sc->sc_hub_desc; len = 0; err = 0; value = UGETW(req->wValue); index = UGETW(req->wIndex); DPRINTFN(3, "type=0x%02x request=0x%02x wLen=0x%04x " "wValue=0x%04x wIndex=0x%04x\n", req->bmRequestType, req->bRequest, UGETW(req->wLength), value, index); #define C(x,y) ((x) | ((y) << 8)) switch (C(req->bRequest, req->bmRequestType)) { case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE): case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE): case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT): /* * DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops * for the integrated root hub. */ break; case C(UR_GET_CONFIG, UT_READ_DEVICE): len = 1; sc->sc_hub_desc.temp[0] = sc->sc_conf; break; case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): switch (value >> 8) { case UDESC_DEVICE: if ((value & 0xff) != 0) { err = USB_ERR_IOERROR; goto done; } len = sizeof(ehci_devd); ptr = (const void *)&ehci_devd; break; /* * We can't really operate at another speed, * but the specification says we need this * descriptor: */ case UDESC_DEVICE_QUALIFIER: if ((value & 0xff) != 0) { err = USB_ERR_IOERROR; goto done; } len = sizeof(ehci_odevd); ptr = (const void *)&ehci_odevd; break; case UDESC_CONFIG: if ((value & 0xff) != 0) { err = USB_ERR_IOERROR; goto done; } len = sizeof(ehci_confd); ptr = (const void *)&ehci_confd; break; case UDESC_STRING: switch (value & 0xff) { case 0: /* Language table */ str_ptr = "\001"; break; case 1: /* Vendor */ str_ptr = sc->sc_vendor; break; case 2: /* Product */ str_ptr = "EHCI root HUB"; break; default: str_ptr = ""; break; } len = usb_make_str_desc( sc->sc_hub_desc.temp, sizeof(sc->sc_hub_desc.temp), str_ptr); break; default: err = USB_ERR_IOERROR; goto done; } break; case C(UR_GET_INTERFACE, UT_READ_INTERFACE): len = 1; sc->sc_hub_desc.temp[0] = 0; break; case C(UR_GET_STATUS, UT_READ_DEVICE): len = 2; USETW(sc->sc_hub_desc.stat.wStatus, UDS_SELF_POWERED); break; case C(UR_GET_STATUS, UT_READ_INTERFACE): case C(UR_GET_STATUS, UT_READ_ENDPOINT): len = 2; USETW(sc->sc_hub_desc.stat.wStatus, 0); break; case C(UR_SET_ADDRESS, UT_WRITE_DEVICE): if (value >= EHCI_MAX_DEVICES) { err = USB_ERR_IOERROR; goto done; } sc->sc_addr = value; break; case C(UR_SET_CONFIG, UT_WRITE_DEVICE): if ((value != 0) && (value != 1)) { err = USB_ERR_IOERROR; goto done; } sc->sc_conf = value; break; case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE): break; case C(UR_SET_FEATURE, UT_WRITE_DEVICE): case C(UR_SET_FEATURE, UT_WRITE_INTERFACE): case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT): err = USB_ERR_IOERROR; goto done; case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE): break; case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT): break; /* Hub requests */ case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): break; case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): DPRINTFN(9, "UR_CLEAR_PORT_FEATURE\n"); if ((index < 1) || (index > sc->sc_noport)) { err = USB_ERR_IOERROR; goto done; } port = EHCI_PORTSC(index); v = EOREAD4(sc, port) & ~EHCI_PS_CLEAR; switch (value) { case UHF_PORT_ENABLE: EOWRITE4(sc, port, v & ~EHCI_PS_PE); break; case UHF_PORT_SUSPEND: if ((v & EHCI_PS_SUSP) && (!(v & EHCI_PS_FPR))) { /* * waking up a High Speed device is rather * complicated if */ EOWRITE4(sc, port, v | EHCI_PS_FPR); } /* wait 20ms for resume sequence to complete */ usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 50); EOWRITE4(sc, port, v & ~(EHCI_PS_SUSP | EHCI_PS_FPR | (3 << 10) /* High Speed */ )); /* 4ms settle time */ usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 250); break; case UHF_PORT_POWER: EOWRITE4(sc, port, v & ~EHCI_PS_PP); break; case UHF_PORT_TEST: DPRINTFN(3, "clear port test " "%d\n", index); break; case UHF_PORT_INDICATOR: DPRINTFN(3, "clear port ind " "%d\n", index); EOWRITE4(sc, port, v & ~EHCI_PS_PIC); break; case UHF_C_PORT_CONNECTION: EOWRITE4(sc, port, v | EHCI_PS_CSC); break; case UHF_C_PORT_ENABLE: EOWRITE4(sc, port, v | EHCI_PS_PEC); break; case UHF_C_PORT_SUSPEND: EOWRITE4(sc, port, v | EHCI_PS_SUSP); break; case UHF_C_PORT_OVER_CURRENT: EOWRITE4(sc, port, v | EHCI_PS_OCC); break; case UHF_C_PORT_RESET: sc->sc_isreset = 0; break; default: err = USB_ERR_IOERROR; goto done; } break; case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): if ((value & 0xff) != 0) { err = USB_ERR_IOERROR; goto done; } v = EREAD4(sc, EHCI_HCSPARAMS); sc->sc_hub_desc.hubd = ehci_hubd; sc->sc_hub_desc.hubd.bNbrPorts = sc->sc_noport; if (EHCI_HCS_PPC(v)) i = UHD_PWR_INDIVIDUAL; else i = UHD_PWR_NO_SWITCH; if (EHCI_HCS_P_INDICATOR(v)) i |= UHD_PORT_IND; USETW(sc->sc_hub_desc.hubd.wHubCharacteristics, i); /* XXX can't find out? */ sc->sc_hub_desc.hubd.bPwrOn2PwrGood = 200; /* XXX don't know if ports are removable or not */ sc->sc_hub_desc.hubd.bDescLength = 8 + ((sc->sc_noport + 7) / 8); len = sc->sc_hub_desc.hubd.bDescLength; break; case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): len = 16; memset(sc->sc_hub_desc.temp, 0, 16); break; case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): DPRINTFN(9, "get port status i=%d\n", index); if ((index < 1) || (index > sc->sc_noport)) { err = USB_ERR_IOERROR; goto done; } v = EOREAD4(sc, EHCI_PORTSC(index)); DPRINTFN(9, "port status=0x%04x\n", v); if (sc->sc_flags & (EHCI_SCFLG_FORCESPEED | EHCI_SCFLG_TT)) { if ((v & 0xc000000) == 0x8000000) i = UPS_HIGH_SPEED; else if ((v & 0xc000000) == 0x4000000) i = UPS_LOW_SPEED; else i = 0; } else { i = UPS_HIGH_SPEED; } if (v & EHCI_PS_CS) i |= UPS_CURRENT_CONNECT_STATUS; if (v & EHCI_PS_PE) i |= UPS_PORT_ENABLED; if ((v & EHCI_PS_SUSP) && !(v & EHCI_PS_FPR)) i |= UPS_SUSPEND; if (v & EHCI_PS_OCA) i |= UPS_OVERCURRENT_INDICATOR; if (v & EHCI_PS_PR) i |= UPS_RESET; if (v & EHCI_PS_PP) i |= UPS_PORT_POWER; USETW(sc->sc_hub_desc.ps.wPortStatus, i); i = 0; if (v & EHCI_PS_CSC) i |= UPS_C_CONNECT_STATUS; if (v & EHCI_PS_PEC) i |= UPS_C_PORT_ENABLED; if (v & EHCI_PS_OCC) i |= UPS_C_OVERCURRENT_INDICATOR; if (v & EHCI_PS_FPR) i |= UPS_C_SUSPEND; if (sc->sc_isreset) i |= UPS_C_PORT_RESET; USETW(sc->sc_hub_desc.ps.wPortChange, i); len = sizeof(sc->sc_hub_desc.ps); break; case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): err = USB_ERR_IOERROR; goto done; case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): break; case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): if ((index < 1) || (index > sc->sc_noport)) { err = USB_ERR_IOERROR; goto done; } port = EHCI_PORTSC(index); v = EOREAD4(sc, port) & ~EHCI_PS_CLEAR; switch (value) { case UHF_PORT_ENABLE: EOWRITE4(sc, port, v | EHCI_PS_PE); break; case UHF_PORT_SUSPEND: EOWRITE4(sc, port, v | EHCI_PS_SUSP); break; case UHF_PORT_RESET: DPRINTFN(6, "reset port %d\n", index); #ifdef USB_DEBUG if (ehcinohighspeed) { /* * Connect USB device to companion * controller. */ ehci_disown(sc, index, 1); break; } #endif if (EHCI_PS_IS_LOWSPEED(v) && (sc->sc_flags & EHCI_SCFLG_TT) == 0) { /* Low speed device, give up ownership. */ ehci_disown(sc, index, 1); break; } /* Start reset sequence. */ v &= ~(EHCI_PS_PE | EHCI_PS_PR); EOWRITE4(sc, port, v | EHCI_PS_PR); /* Wait for reset to complete. */ usb_pause_mtx(&sc->sc_bus.bus_mtx, USB_MS_TO_TICKS(usb_port_root_reset_delay)); /* Terminate reset sequence. */ if (!(sc->sc_flags & EHCI_SCFLG_NORESTERM)) EOWRITE4(sc, port, v); /* Wait for HC to complete reset. */ usb_pause_mtx(&sc->sc_bus.bus_mtx, USB_MS_TO_TICKS(EHCI_PORT_RESET_COMPLETE)); v = EOREAD4(sc, port); DPRINTF("ehci after reset, status=0x%08x\n", v); if (v & EHCI_PS_PR) { device_printf(sc->sc_bus.bdev, "port reset timeout\n"); err = USB_ERR_TIMEOUT; goto done; } if (!(v & EHCI_PS_PE) && (sc->sc_flags & EHCI_SCFLG_TT) == 0) { /* Not a high speed device, give up ownership.*/ ehci_disown(sc, index, 0); break; } sc->sc_isreset = 1; DPRINTF("ehci port %d reset, status = 0x%08x\n", index, v); break; case UHF_PORT_POWER: DPRINTFN(3, "set port power %d\n", index); EOWRITE4(sc, port, v | EHCI_PS_PP); break; case UHF_PORT_TEST: DPRINTFN(3, "set port test %d\n", index); break; case UHF_PORT_INDICATOR: DPRINTFN(3, "set port ind %d\n", index); EOWRITE4(sc, port, v | EHCI_PS_PIC); break; default: err = USB_ERR_IOERROR; goto done; } break; case C(UR_CLEAR_TT_BUFFER, UT_WRITE_CLASS_OTHER): case C(UR_RESET_TT, UT_WRITE_CLASS_OTHER): case C(UR_GET_TT_STATE, UT_READ_CLASS_OTHER): case C(UR_STOP_TT, UT_WRITE_CLASS_OTHER): break; default: err = USB_ERR_IOERROR; goto done; } done: *plength = len; *pptr = ptr; return (err); } static void ehci_xfer_setup(struct usb_setup_params *parm) { struct usb_page_search page_info; struct usb_page_cache *pc; ehci_softc_t *sc; struct usb_xfer *xfer; void *last_obj; uint32_t nqtd; uint32_t nqh; uint32_t nsitd; uint32_t nitd; uint32_t n; sc = EHCI_BUS2SC(parm->udev->bus); xfer = parm->curr_xfer; nqtd = 0; nqh = 0; nsitd = 0; nitd = 0; /* * compute maximum number of some structures */ if (parm->methods == &ehci_device_ctrl_methods) { /* * The proof for the "nqtd" formula is illustrated like * this: * * +------------------------------------+ * | | * | |remainder -> | * | +-----+---+ | * | | xxx | x | frm 0 | * | +-----+---++ | * | | xxx | xx | frm 1 | * | +-----+----+ | * | ... | * +------------------------------------+ * * "xxx" means a completely full USB transfer descriptor * * "x" and "xx" means a short USB packet * * For the remainder of an USB transfer modulo * "max_data_length" we need two USB transfer descriptors. * One to transfer the remaining data and one to finalise * with a zero length packet in case the "force_short_xfer" * flag is set. We only need two USB transfer descriptors in * the case where the transfer length of the first one is a * factor of "max_frame_size". The rest of the needed USB * transfer descriptors is given by the buffer size divided * by the maximum data payload. */ parm->hc_max_packet_size = 0x400; parm->hc_max_packet_count = 1; parm->hc_max_frame_size = EHCI_QTD_PAYLOAD_MAX; xfer->flags_int.bdma_enable = 1; usbd_transfer_setup_sub(parm); nqh = 1; nqtd = ((2 * xfer->nframes) + 1 /* STATUS */ + (xfer->max_data_length / xfer->max_hc_frame_size)); } else if (parm->methods == &ehci_device_bulk_methods) { parm->hc_max_packet_size = 0x400; parm->hc_max_packet_count = 1; parm->hc_max_frame_size = EHCI_QTD_PAYLOAD_MAX; xfer->flags_int.bdma_enable = 1; usbd_transfer_setup_sub(parm); nqh = 1; nqtd = ((2 * xfer->nframes) + (xfer->max_data_length / xfer->max_hc_frame_size)); } else if (parm->methods == &ehci_device_intr_methods) { if (parm->speed == USB_SPEED_HIGH) { parm->hc_max_packet_size = 0x400; parm->hc_max_packet_count = 3; } else if (parm->speed == USB_SPEED_FULL) { parm->hc_max_packet_size = USB_FS_BYTES_PER_HS_UFRAME; parm->hc_max_packet_count = 1; } else { parm->hc_max_packet_size = USB_FS_BYTES_PER_HS_UFRAME / 8; parm->hc_max_packet_count = 1; } parm->hc_max_frame_size = EHCI_QTD_PAYLOAD_MAX; xfer->flags_int.bdma_enable = 1; usbd_transfer_setup_sub(parm); nqh = 1; nqtd = ((2 * xfer->nframes) + (xfer->max_data_length / xfer->max_hc_frame_size)); } else if (parm->methods == &ehci_device_isoc_fs_methods) { parm->hc_max_packet_size = 0x3FF; parm->hc_max_packet_count = 1; parm->hc_max_frame_size = 0x3FF; xfer->flags_int.bdma_enable = 1; usbd_transfer_setup_sub(parm); nsitd = xfer->nframes; } else if (parm->methods == &ehci_device_isoc_hs_methods) { parm->hc_max_packet_size = 0x400; parm->hc_max_packet_count = 3; parm->hc_max_frame_size = 0xC00; xfer->flags_int.bdma_enable = 1; usbd_transfer_setup_sub(parm); nitd = ((xfer->nframes + 7) / 8) << usbd_xfer_get_fps_shift(xfer); } else { parm->hc_max_packet_size = 0x400; parm->hc_max_packet_count = 1; parm->hc_max_frame_size = 0x400; usbd_transfer_setup_sub(parm); } alloc_dma_set: if (parm->err) { return; } /* * Allocate queue heads and transfer descriptors */ last_obj = NULL; if (usbd_transfer_setup_sub_malloc( parm, &pc, sizeof(ehci_itd_t), EHCI_ITD_ALIGN, nitd)) { parm->err = USB_ERR_NOMEM; return; } if (parm->buf) { for (n = 0; n != nitd; n++) { ehci_itd_t *td; usbd_get_page(pc + n, 0, &page_info); td = page_info.buffer; /* init TD */ td->itd_self = htohc32(sc, page_info.physaddr | EHCI_LINK_ITD); td->obj_next = last_obj; td->page_cache = pc + n; last_obj = td; usb_pc_cpu_flush(pc + n); } } if (usbd_transfer_setup_sub_malloc( parm, &pc, sizeof(ehci_sitd_t), EHCI_SITD_ALIGN, nsitd)) { parm->err = USB_ERR_NOMEM; return; } if (parm->buf) { for (n = 0; n != nsitd; n++) { ehci_sitd_t *td; usbd_get_page(pc + n, 0, &page_info); td = page_info.buffer; /* init TD */ td->sitd_self = htohc32(sc, page_info.physaddr | EHCI_LINK_SITD); td->obj_next = last_obj; td->page_cache = pc + n; last_obj = td; usb_pc_cpu_flush(pc + n); } } if (usbd_transfer_setup_sub_malloc( parm, &pc, sizeof(ehci_qtd_t), EHCI_QTD_ALIGN, nqtd)) { parm->err = USB_ERR_NOMEM; return; } if (parm->buf) { for (n = 0; n != nqtd; n++) { ehci_qtd_t *qtd; usbd_get_page(pc + n, 0, &page_info); qtd = page_info.buffer; /* init TD */ qtd->qtd_self = htohc32(sc, page_info.physaddr); qtd->obj_next = last_obj; qtd->page_cache = pc + n; last_obj = qtd; usb_pc_cpu_flush(pc + n); } } xfer->td_start[xfer->flags_int.curr_dma_set] = last_obj; last_obj = NULL; if (usbd_transfer_setup_sub_malloc( parm, &pc, sizeof(ehci_qh_t), EHCI_QH_ALIGN, nqh)) { parm->err = USB_ERR_NOMEM; return; } if (parm->buf) { for (n = 0; n != nqh; n++) { ehci_qh_t *qh; usbd_get_page(pc + n, 0, &page_info); qh = page_info.buffer; /* init QH */ qh->qh_self = htohc32(sc, page_info.physaddr | EHCI_LINK_QH); qh->obj_next = last_obj; qh->page_cache = pc + n; last_obj = qh; usb_pc_cpu_flush(pc + n); } } xfer->qh_start[xfer->flags_int.curr_dma_set] = last_obj; if (!xfer->flags_int.curr_dma_set) { xfer->flags_int.curr_dma_set = 1; goto alloc_dma_set; } } static void ehci_xfer_unsetup(struct usb_xfer *xfer) { return; } static void ehci_ep_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc, struct usb_endpoint *ep) { ehci_softc_t *sc = EHCI_BUS2SC(udev->bus); DPRINTFN(2, "endpoint=%p, addr=%d, endpt=%d, mode=%d (%d)\n", ep, udev->address, edesc->bEndpointAddress, udev->flags.usb_mode, sc->sc_addr); if (udev->flags.usb_mode != USB_MODE_HOST) { /* not supported */ return; } if (udev->device_index != sc->sc_addr) { if ((udev->speed != USB_SPEED_HIGH) && ((udev->hs_hub_addr == 0) || (udev->hs_port_no == 0) || (udev->parent_hs_hub == NULL) || (udev->parent_hs_hub->hub == NULL))) { /* We need a transaction translator */ goto done; } switch (edesc->bmAttributes & UE_XFERTYPE) { case UE_CONTROL: ep->methods = &ehci_device_ctrl_methods; break; case UE_INTERRUPT: ep->methods = &ehci_device_intr_methods; break; case UE_ISOCHRONOUS: if (udev->speed == USB_SPEED_HIGH) { ep->methods = &ehci_device_isoc_hs_methods; } else if (udev->speed == USB_SPEED_FULL) { ep->methods = &ehci_device_isoc_fs_methods; } break; case UE_BULK: ep->methods = &ehci_device_bulk_methods; break; default: /* do nothing */ break; } } done: return; } static void ehci_get_dma_delay(struct usb_device *udev, uint32_t *pus) { /* * Wait until the hardware has finished any possible use of * the transfer descriptor(s) and QH */ *pus = (188); /* microseconds */ } static void ehci_device_resume(struct usb_device *udev) { ehci_softc_t *sc = EHCI_BUS2SC(udev->bus); struct usb_xfer *xfer; struct usb_pipe_methods *methods; DPRINTF("\n"); USB_BUS_LOCK(udev->bus); TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { if (xfer->xroot->udev == udev) { methods = xfer->endpoint->methods; if ((methods == &ehci_device_bulk_methods) || (methods == &ehci_device_ctrl_methods)) { EHCI_APPEND_QH(xfer->qh_start[xfer->flags_int.curr_dma_set], sc->sc_async_p_last); } if (methods == &ehci_device_intr_methods) { EHCI_APPEND_QH(xfer->qh_start[xfer->flags_int.curr_dma_set], sc->sc_intr_p_last[xfer->qh_pos]); } } } USB_BUS_UNLOCK(udev->bus); return; } static void ehci_device_suspend(struct usb_device *udev) { ehci_softc_t *sc = EHCI_BUS2SC(udev->bus); struct usb_xfer *xfer; struct usb_pipe_methods *methods; DPRINTF("\n"); USB_BUS_LOCK(udev->bus); TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { if (xfer->xroot->udev == udev) { methods = xfer->endpoint->methods; if ((methods == &ehci_device_bulk_methods) || (methods == &ehci_device_ctrl_methods)) { EHCI_REMOVE_QH(xfer->qh_start[xfer->flags_int.curr_dma_set], sc->sc_async_p_last); } if (methods == &ehci_device_intr_methods) { EHCI_REMOVE_QH(xfer->qh_start[xfer->flags_int.curr_dma_set], sc->sc_intr_p_last[xfer->qh_pos]); } } } USB_BUS_UNLOCK(udev->bus); } static void ehci_set_hw_power_sleep(struct usb_bus *bus, uint32_t state) { struct ehci_softc *sc = EHCI_BUS2SC(bus); switch (state) { case USB_HW_POWER_SUSPEND: case USB_HW_POWER_SHUTDOWN: ehci_suspend(sc); break; case USB_HW_POWER_RESUME: ehci_resume(sc); break; default: break; } } static void ehci_set_hw_power(struct usb_bus *bus) { ehci_softc_t *sc = EHCI_BUS2SC(bus); uint32_t temp; uint32_t flags; DPRINTF("\n"); USB_BUS_LOCK(bus); flags = bus->hw_power_state; temp = EOREAD4(sc, EHCI_USBCMD); temp &= ~(EHCI_CMD_ASE | EHCI_CMD_PSE); if (flags & (USB_HW_POWER_CONTROL | USB_HW_POWER_BULK)) { DPRINTF("Async is active\n"); temp |= EHCI_CMD_ASE; } if (flags & (USB_HW_POWER_INTERRUPT | USB_HW_POWER_ISOC)) { DPRINTF("Periodic is active\n"); temp |= EHCI_CMD_PSE; } EOWRITE4(sc, EHCI_USBCMD, temp); USB_BUS_UNLOCK(bus); return; } struct usb_bus_methods ehci_bus_methods = { .endpoint_init = ehci_ep_init, .xfer_setup = ehci_xfer_setup, .xfer_unsetup = ehci_xfer_unsetup, .get_dma_delay = ehci_get_dma_delay, .device_resume = ehci_device_resume, .device_suspend = ehci_device_suspend, .set_hw_power = ehci_set_hw_power, .set_hw_power_sleep = ehci_set_hw_power_sleep, .roothub_exec = ehci_roothub_exec, .xfer_poll = ehci_do_poll, };