#include /*- * Copyright (c) 2013 Oleksandr Tymoshenko * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define USB_DEBUG_VAR usbssdebug #include #include #include #include #include #include #include #include #define USBCTRL_REV 0x00 #define USBCTRL_CTRL 0x14 #define USBCTRL_STAT 0x18 #define USBCTRL_IRQ_STAT0 0x30 #define IRQ_STAT0_RXSHIFT 16 #define IRQ_STAT0_TXSHIFT 0 #define USBCTRL_IRQ_STAT1 0x34 #define IRQ_STAT1_DRVVBUS (1 << 8) #define USBCTRL_INTEN_SET0 0x38 #define USBCTRL_INTEN_SET1 0x3C #define USBCTRL_INTEN_USB_ALL 0x1ff #define USBCTRL_INTEN_USB_SOF (1 << 3) #define USBCTRL_INTEN_CLR0 0x40 #define USBCTRL_INTEN_CLR1 0x44 #define USBCTRL_UTMI 0xE0 #define USBCTRL_UTMI_FSDATAEXT (1 << 1) #define USBCTRL_MODE 0xE8 #define USBCTRL_MODE_IDDIG (1 << 8) #define USBCTRL_MODE_IDDIGMUX (1 << 7) /* USBSS resource + 2 MUSB ports */ #define RES_USBCORE 0 #define RES_USBCTRL 1 #define USB_WRITE4(sc, idx, reg, val) do { \ bus_write_4((sc)->sc_mem_res[idx], (reg), (val)); \ } while (0) #define USB_READ4(sc, idx, reg) bus_read_4((sc)->sc_mem_res[idx], (reg)) #define USBCTRL_WRITE4(sc, reg, val) \ USB_WRITE4((sc), RES_USBCTRL, (reg), (val)) #define USBCTRL_READ4(sc, reg) \ USB_READ4((sc), RES_USBCTRL, (reg)) static struct resource_spec am335x_musbotg_mem_spec[] = { { SYS_RES_MEMORY, 0, RF_ACTIVE }, { SYS_RES_MEMORY, 1, RF_ACTIVE }, { -1, 0, 0 } }; #ifdef USB_DEBUG static int usbssdebug = 0; static SYSCTL_NODE(_hw_usb, OID_AUTO, am335x_usbss, CTLFLAG_RW, 0, "AM335x USBSS"); SYSCTL_INT(_hw_usb_am335x_usbss, OID_AUTO, debug, CTLFLAG_RW, &usbssdebug, 0, "Debug level"); #endif static device_probe_t musbotg_probe; static device_attach_t musbotg_attach; static device_detach_t musbotg_detach; struct musbotg_super_softc { struct musbotg_softc sc_otg; struct resource *sc_mem_res[2]; int sc_irq_rid; }; static void musbotg_vbus_poll(struct musbotg_super_softc *sc) { uint32_t stat; if (sc->sc_otg.sc_mode == MUSB2_DEVICE_MODE) musbotg_vbus_interrupt(&sc->sc_otg, 1); else { stat = USBCTRL_READ4(sc, USBCTRL_STAT); musbotg_vbus_interrupt(&sc->sc_otg, stat & 1); } } /* * Arg to musbotg_clocks_on and musbot_clocks_off is * a uint32_t * pointing to the SCM register offset. */ static uint32_t USB_CTRL[] = {SCM_USB_CTRL0, SCM_USB_CTRL1}; static void musbotg_clocks_on(void *arg) { struct musbotg_softc *sc; uint32_t c, reg; sc = arg; reg = USB_CTRL[sc->sc_id]; ti_scm_reg_read_4(reg, &c); c &= ~3; /* Enable power */ c |= 1 << 19; /* VBUS detect enable */ c |= 1 << 20; /* Session end enable */ ti_scm_reg_write_4(reg, c); } static void musbotg_clocks_off(void *arg) { struct musbotg_softc *sc; uint32_t c, reg; sc = arg; reg = USB_CTRL[sc->sc_id]; /* Disable power to PHY */ ti_scm_reg_read_4(reg, &c); ti_scm_reg_write_4(reg, c | 3); } static void musbotg_ep_int_set(struct musbotg_softc *sc, int ep, int on) { struct musbotg_super_softc *ssc = sc->sc_platform_data; uint32_t epmask; epmask = ((1 << ep) << IRQ_STAT0_RXSHIFT); epmask |= ((1 << ep) << IRQ_STAT0_TXSHIFT); if (on) USBCTRL_WRITE4(ssc, USBCTRL_INTEN_SET0, epmask); else USBCTRL_WRITE4(ssc, USBCTRL_INTEN_CLR0, epmask); } static void musbotg_wrapper_interrupt(void *arg) { struct musbotg_softc *sc = arg; struct musbotg_super_softc *ssc = sc->sc_platform_data; uint32_t stat, stat0, stat1; stat = USBCTRL_READ4(ssc, USBCTRL_STAT); stat0 = USBCTRL_READ4(ssc, USBCTRL_IRQ_STAT0); stat1 = USBCTRL_READ4(ssc, USBCTRL_IRQ_STAT1); if (stat0) USBCTRL_WRITE4(ssc, USBCTRL_IRQ_STAT0, stat0); if (stat1) USBCTRL_WRITE4(ssc, USBCTRL_IRQ_STAT1, stat1); DPRINTFN(4, "port%d: stat0=%08x stat1=%08x, stat=%08x\n", sc->sc_id, stat0, stat1, stat); if (stat1 & IRQ_STAT1_DRVVBUS) musbotg_vbus_interrupt(sc, stat & 1); musbotg_interrupt(arg, ((stat0 >> 16) & 0xffff), stat0 & 0xffff, stat1 & 0xff); } static int musbotg_probe(device_t dev) { if (!ofw_bus_status_okay(dev)) return (ENXIO); if (!ofw_bus_is_compatible(dev, "ti,musb-am33xx")) return (ENXIO); device_set_desc(dev, "TI AM33xx integrated USB OTG controller"); return (BUS_PROBE_DEFAULT); } static int musbotg_attach(device_t dev) { struct musbotg_super_softc *sc = device_get_softc(dev); char mode[16]; int err; uint32_t reg; sc->sc_otg.sc_id = device_get_unit(dev); /* Request the memory resources */ err = bus_alloc_resources(dev, am335x_musbotg_mem_spec, sc->sc_mem_res); if (err) { device_printf(dev, "Error: could not allocate mem resources\n"); return (ENXIO); } /* Request the IRQ resources */ sc->sc_otg.sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->sc_irq_rid, RF_ACTIVE); if (sc->sc_otg.sc_irq_res == NULL) { device_printf(dev, "Error: could not allocate irq resources\n"); return (ENXIO); } /* setup MUSB OTG USB controller interface softc */ sc->sc_otg.sc_clocks_on = &musbotg_clocks_on; sc->sc_otg.sc_clocks_off = &musbotg_clocks_off; sc->sc_otg.sc_clocks_arg = &sc->sc_otg; sc->sc_otg.sc_ep_int_set = musbotg_ep_int_set; /* initialise some bus fields */ sc->sc_otg.sc_bus.parent = dev; sc->sc_otg.sc_bus.devices = sc->sc_otg.sc_devices; sc->sc_otg.sc_bus.devices_max = MUSB2_MAX_DEVICES; sc->sc_otg.sc_bus.dma_bits = 32; /* get all DMA memory */ if (usb_bus_mem_alloc_all(&sc->sc_otg.sc_bus, USB_GET_DMA_TAG(dev), NULL)) { device_printf(dev, "Failed allocate bus mem for musb\n"); return (ENOMEM); } sc->sc_otg.sc_io_res = sc->sc_mem_res[RES_USBCORE]; sc->sc_otg.sc_io_tag = rman_get_bustag(sc->sc_otg.sc_io_res); sc->sc_otg.sc_io_hdl = rman_get_bushandle(sc->sc_otg.sc_io_res); sc->sc_otg.sc_io_size = rman_get_size(sc->sc_otg.sc_io_res); sc->sc_otg.sc_bus.bdev = device_add_child(dev, "usbus", -1); if (!(sc->sc_otg.sc_bus.bdev)) { device_printf(dev, "No busdev for musb\n"); goto error; } device_set_ivars(sc->sc_otg.sc_bus.bdev, &sc->sc_otg.sc_bus); err = bus_setup_intr(dev, sc->sc_otg.sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, NULL, (driver_intr_t *)musbotg_wrapper_interrupt, &sc->sc_otg, &sc->sc_otg.sc_intr_hdl); if (err) { sc->sc_otg.sc_intr_hdl = NULL; device_printf(dev, "Failed to setup interrupt for musb\n"); goto error; } sc->sc_otg.sc_platform_data = sc; if (OF_getprop(ofw_bus_get_node(dev), "dr_mode", mode, sizeof(mode)) > 0) { if (strcasecmp(mode, "host") == 0) sc->sc_otg.sc_mode = MUSB2_HOST_MODE; else sc->sc_otg.sc_mode = MUSB2_DEVICE_MODE; } else { /* Beaglebone defaults: USB0 device, USB1 HOST. */ if (sc->sc_otg.sc_id == 0) sc->sc_otg.sc_mode = MUSB2_DEVICE_MODE; else sc->sc_otg.sc_mode = MUSB2_HOST_MODE; } /* * software-controlled function */ if (sc->sc_otg.sc_mode == MUSB2_HOST_MODE) { reg = USBCTRL_READ4(sc, USBCTRL_MODE); reg |= USBCTRL_MODE_IDDIGMUX; reg &= ~USBCTRL_MODE_IDDIG; USBCTRL_WRITE4(sc, USBCTRL_MODE, reg); USBCTRL_WRITE4(sc, USBCTRL_UTMI, USBCTRL_UTMI_FSDATAEXT); } else { reg = USBCTRL_READ4(sc, USBCTRL_MODE); reg |= USBCTRL_MODE_IDDIGMUX; reg |= USBCTRL_MODE_IDDIG; USBCTRL_WRITE4(sc, USBCTRL_MODE, reg); } reg = USBCTRL_INTEN_USB_ALL & ~USBCTRL_INTEN_USB_SOF; USBCTRL_WRITE4(sc, USBCTRL_INTEN_SET1, reg); USBCTRL_WRITE4(sc, USBCTRL_INTEN_CLR0, 0xffffffff); err = musbotg_init(&sc->sc_otg); if (!err) err = device_probe_and_attach(sc->sc_otg.sc_bus.bdev); if (err) goto error; /* poll VBUS one time */ musbotg_vbus_poll(sc); return (0); error: musbotg_detach(dev); return (ENXIO); } static int musbotg_detach(device_t dev) { struct musbotg_super_softc *sc = device_get_softc(dev); int err; /* during module unload there are lots of children leftover */ device_delete_children(dev); if (sc->sc_otg.sc_irq_res && sc->sc_otg.sc_intr_hdl) { /* * only call musbotg_uninit() after musbotg_init() */ musbotg_uninit(&sc->sc_otg); err = bus_teardown_intr(dev, sc->sc_otg.sc_irq_res, sc->sc_otg.sc_intr_hdl); sc->sc_otg.sc_intr_hdl = NULL; } usb_bus_mem_free_all(&sc->sc_otg.sc_bus, NULL); /* Free resources if any */ if (sc->sc_mem_res[0]) bus_release_resources(dev, am335x_musbotg_mem_spec, sc->sc_mem_res); if (sc->sc_otg.sc_irq_res) bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irq_rid, sc->sc_otg.sc_irq_res); return (0); } static device_method_t musbotg_methods[] = { /* Device interface */ DEVMETHOD(device_probe, musbotg_probe), DEVMETHOD(device_attach, musbotg_attach), DEVMETHOD(device_detach, musbotg_detach), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD_END }; static driver_t musbotg_driver = { .name = "musbotg", .methods = musbotg_methods, .size = sizeof(struct musbotg_super_softc), }; static devclass_t musbotg_devclass; DRIVER_MODULE(musbotg, usbss, musbotg_driver, musbotg_devclass, 0, 0); MODULE_DEPEND(musbotg, usbss, 1, 1, 1);