From bceabc95c1c85d793200446fa85f1ddc6313ea29 Mon Sep 17 00:00:00 2001 From: Sebastian Huber Date: Wed, 9 Oct 2013 22:42:09 +0200 Subject: Move files to match FreeBSD layout --- freebsd/sys/sys/ata.h | 560 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 560 insertions(+) create mode 100644 freebsd/sys/sys/ata.h (limited to 'freebsd/sys/sys/ata.h') diff --git a/freebsd/sys/sys/ata.h b/freebsd/sys/sys/ata.h new file mode 100644 index 00000000..df4cea71 --- /dev/null +++ b/freebsd/sys/sys/ata.h @@ -0,0 +1,560 @@ +/*- + * Copyright (c) 2000 - 2008 Søren Schmidt + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification, immediately at the beginning of the file. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#ifndef _SYS_ATA_HH_ +#define _SYS_ATA_HH_ + +#include + +/* ATA/ATAPI device parameters */ +struct ata_params { +/*000*/ u_int16_t config; /* configuration info */ +#define ATA_PROTO_MASK 0x8003 +#define ATA_PROTO_ATAPI 0x8000 +#define ATA_PROTO_ATAPI_12 0x8000 +#define ATA_PROTO_ATAPI_16 0x8001 +#define ATA_PROTO_CFA 0x848a +#define ATA_ATAPI_TYPE_MASK 0x1f00 +#define ATA_ATAPI_TYPE_DIRECT 0x0000 /* disk/floppy */ +#define ATA_ATAPI_TYPE_TAPE 0x0100 /* streaming tape */ +#define ATA_ATAPI_TYPE_CDROM 0x0500 /* CD-ROM device */ +#define ATA_ATAPI_TYPE_OPTICAL 0x0700 /* optical disk */ +#define ATA_DRQ_MASK 0x0060 +#define ATA_DRQ_SLOW 0x0000 /* cpu 3 ms delay */ +#define ATA_DRQ_INTR 0x0020 /* interrupt 10 ms delay */ +#define ATA_DRQ_FAST 0x0040 /* accel 50 us delay */ +#define ATA_RESP_INCOMPLETE 0x0004 + +/*001*/ u_int16_t cylinders; /* # of cylinders */ +/*002*/ u_int16_t specconf; /* specific configuration */ +/*003*/ u_int16_t heads; /* # heads */ + u_int16_t obsolete4; + u_int16_t obsolete5; +/*006*/ u_int16_t sectors; /* # sectors/track */ +/*007*/ u_int16_t vendor7[3]; +/*010*/ u_int8_t serial[20]; /* serial number */ +/*020*/ u_int16_t retired20; + u_int16_t retired21; + u_int16_t obsolete22; +/*023*/ u_int8_t revision[8]; /* firmware revision */ +/*027*/ u_int8_t model[40]; /* model name */ +/*047*/ u_int16_t sectors_intr; /* sectors per interrupt */ +/*048*/ u_int16_t usedmovsd; /* double word read/write? */ +/*049*/ u_int16_t capabilities1; +#define ATA_SUPPORT_DMA 0x0100 +#define ATA_SUPPORT_LBA 0x0200 +#define ATA_SUPPORT_IORDY 0x0400 +#define ATA_SUPPORT_IORDYDIS 0x0800 +#define ATA_SUPPORT_OVERLAP 0x4000 + +/*050*/ u_int16_t capabilities2; +/*051*/ u_int16_t retired_piomode; /* PIO modes 0-2 */ +#define ATA_RETIRED_PIO_MASK 0x0300 + +/*052*/ u_int16_t retired_dmamode; /* DMA modes */ +#define ATA_RETIRED_DMA_MASK 0x0003 + +/*053*/ u_int16_t atavalid; /* fields valid */ +#define ATA_FLAG_54_58 0x0001 /* words 54-58 valid */ +#define ATA_FLAG_64_70 0x0002 /* words 64-70 valid */ +#define ATA_FLAG_88 0x0004 /* word 88 valid */ + +/*054*/ u_int16_t current_cylinders; +/*055*/ u_int16_t current_heads; +/*056*/ u_int16_t current_sectors; +/*057*/ u_int16_t current_size_1; +/*058*/ u_int16_t current_size_2; +/*059*/ u_int16_t multi; +#define ATA_MULTI_VALID 0x0100 + +/*060*/ u_int16_t lba_size_1; + u_int16_t lba_size_2; + u_int16_t obsolete62; +/*063*/ u_int16_t mwdmamodes; /* multiword DMA modes */ +/*064*/ u_int16_t apiomodes; /* advanced PIO modes */ + +/*065*/ u_int16_t mwdmamin; /* min. M/W DMA time/word ns */ +/*066*/ u_int16_t mwdmarec; /* rec. M/W DMA time ns */ +/*067*/ u_int16_t pioblind; /* min. PIO cycle w/o flow */ +/*068*/ u_int16_t pioiordy; /* min. PIO cycle IORDY flow */ +/*069*/ u_int16_t support3; +#define ATA_SUPPORT_RZAT 0x0020 +#define ATA_SUPPORT_DRAT 0x4000 + u_int16_t reserved70; +/*071*/ u_int16_t rlsovlap; /* rel time (us) for overlap */ +/*072*/ u_int16_t rlsservice; /* rel time (us) for service */ + u_int16_t reserved73; + u_int16_t reserved74; +/*075*/ u_int16_t queue; +#define ATA_QUEUE_LEN(x) ((x) & 0x001f) + +/*76*/ u_int16_t satacapabilities; +#define ATA_SATA_GEN1 0x0002 +#define ATA_SATA_GEN2 0x0004 +#define ATA_SATA_GEN3 0x0008 +#define ATA_SUPPORT_NCQ 0x0100 +#define ATA_SUPPORT_IFPWRMNGTRCV 0x0200 +#define ATA_SUPPORT_PHYEVENTCNT 0x0400 +#define ATA_SUPPORT_NCQ_UNLOAD 0x0800 +#define ATA_SUPPORT_NCQ_PRIO 0x1000 +#define ATA_SUPPORT_HAPST 0x2000 +#define ATA_SUPPORT_DAPST 0x4000 +#define ATA_SUPPORT_READLOGDMAEXT 0x8000 + +/*77*/ u_int16_t satacapabilities2; +#define ATA_SATA_CURR_GEN_MASK 0x0006 +#define ATA_SUPPORT_NCQ_STREAM 0x0010 +#define ATA_SUPPORT_NCQ_QMANAGEMENT 0x0020 +/*78*/ u_int16_t satasupport; +#define ATA_SUPPORT_NONZERO 0x0002 +#define ATA_SUPPORT_AUTOACTIVATE 0x0004 +#define ATA_SUPPORT_IFPWRMNGT 0x0008 +#define ATA_SUPPORT_INORDERDATA 0x0010 +#define ATA_SUPPORT_SOFTSETPRESERVE 0x0040 +/*79*/ u_int16_t sataenabled; +#define ATA_ENABLED_DAPST 0x0080 + +/*080*/ u_int16_t version_major; +/*081*/ u_int16_t version_minor; + + struct { +/*082/085*/ u_int16_t command1; +#define ATA_SUPPORT_SMART 0x0001 +#define ATA_SUPPORT_SECURITY 0x0002 +#define ATA_SUPPORT_REMOVABLE 0x0004 +#define ATA_SUPPORT_POWERMGT 0x0008 +#define ATA_SUPPORT_PACKET 0x0010 +#define ATA_SUPPORT_WRITECACHE 0x0020 +#define ATA_SUPPORT_LOOKAHEAD 0x0040 +#define ATA_SUPPORT_RELEASEIRQ 0x0080 +#define ATA_SUPPORT_SERVICEIRQ 0x0100 +#define ATA_SUPPORT_RESET 0x0200 +#define ATA_SUPPORT_PROTECTED 0x0400 +#define ATA_SUPPORT_WRITEBUFFER 0x1000 +#define ATA_SUPPORT_READBUFFER 0x2000 +#define ATA_SUPPORT_NOP 0x4000 + +/*083/086*/ u_int16_t command2; +#define ATA_SUPPORT_MICROCODE 0x0001 +#define ATA_SUPPORT_QUEUED 0x0002 +#define ATA_SUPPORT_CFA 0x0004 +#define ATA_SUPPORT_APM 0x0008 +#define ATA_SUPPORT_NOTIFY 0x0010 +#define ATA_SUPPORT_STANDBY 0x0020 +#define ATA_SUPPORT_SPINUP 0x0040 +#define ATA_SUPPORT_MAXSECURITY 0x0100 +#define ATA_SUPPORT_AUTOACOUSTIC 0x0200 +#define ATA_SUPPORT_ADDRESS48 0x0400 +#define ATA_SUPPORT_OVERLAY 0x0800 +#define ATA_SUPPORT_FLUSHCACHE 0x1000 +#define ATA_SUPPORT_FLUSHCACHE48 0x2000 + +/*084/087*/ u_int16_t extension; +#define ATA_SUPPORT_SMARTLOG 0x0001 +#define ATA_SUPPORT_SMARTTEST 0x0002 +#define ATA_SUPPORT_MEDIASN 0x0004 +#define ATA_SUPPORT_MEDIAPASS 0x0008 +#define ATA_SUPPORT_STREAMING 0x0010 +#define ATA_SUPPORT_GENLOG 0x0020 +#define ATA_SUPPORT_WRITEDMAFUAEXT 0x0040 +#define ATA_SUPPORT_WRITEDMAQFUAEXT 0x0080 +#define ATA_SUPPORT_64BITWWN 0x0100 +#define ATA_SUPPORT_UNLOAD 0x2000 + } __packed support, enabled; + +/*088*/ u_int16_t udmamodes; /* UltraDMA modes */ +/*089*/ u_int16_t erase_time; +/*090*/ u_int16_t enhanced_erase_time; +/*091*/ u_int16_t apm_value; +/*092*/ u_int16_t master_passwd_revision; +/*093*/ u_int16_t hwres; +#define ATA_CABLE_ID 0x2000 + +/*094*/ u_int16_t acoustic; +#define ATA_ACOUSTIC_CURRENT(x) ((x) & 0x00ff) +#define ATA_ACOUSTIC_VENDOR(x) (((x) & 0xff00) >> 8) + +/*095*/ u_int16_t stream_min_req_size; +/*096*/ u_int16_t stream_transfer_time; +/*097*/ u_int16_t stream_access_latency; +/*098*/ u_int32_t stream_granularity; +/*100*/ u_int16_t lba_size48_1; + u_int16_t lba_size48_2; + u_int16_t lba_size48_3; + u_int16_t lba_size48_4; + u_int16_t reserved104; +/*105*/ u_int16_t max_dsm_blocks; +/*106*/ u_int16_t pss; +#define ATA_PSS_LSPPS 0x000F +#define ATA_PSS_LSSABOVE512 0x1000 +#define ATA_PSS_MULTLS 0x2000 +/*107*/ u_int16_t isd; +/*108*/ u_int16_t wwn[4]; + u_int16_t reserved112[5]; +/*117*/ u_int16_t lss_1; +/*118*/ u_int16_t lss_2; +/*119*/ u_int16_t support2; +#define ATA_SUPPORT_WRITEREADVERIFY 0x0002 +#define ATA_SUPPORT_WRITEUNCORREXT 0x0004 +#define ATA_SUPPORT_RWLOGDMAEXT 0x0008 +#define ATA_SUPPORT_MICROCODE3 0x0010 +#define ATA_SUPPORT_FREEFALL 0x0020 +/*120*/ u_int16_t enabled2; + u_int16_t reserved121[6]; +/*127*/ u_int16_t removable_status; +/*128*/ u_int16_t security_status; + u_int16_t reserved129[31]; +/*160*/ u_int16_t cfa_powermode1; + u_int16_t reserved161; +/*162*/ u_int16_t cfa_kms_support; +/*163*/ u_int16_t cfa_trueide_modes; +/*164*/ u_int16_t cfa_memory_modes; + u_int16_t reserved165[4]; +/*169*/ u_int16_t support_dsm; +#define ATA_SUPPORT_DSM_TRIM 0x0001 + u_int16_t reserved170[6]; +/*176*/ u_int8_t media_serial[60]; +/*206*/ u_int16_t sct; + u_int16_t reserved206[2]; +/*209*/ u_int16_t lsalign; +/*210*/ u_int16_t wrv_sectors_m3_1; + u_int16_t wrv_sectors_m3_2; +/*212*/ u_int16_t wrv_sectors_m2_1; + u_int16_t wrv_sectors_m2_2; +/*214*/ u_int16_t nv_cache_caps; +/*215*/ u_int16_t nv_cache_size_1; + u_int16_t nv_cache_size_2; +/*217*/ u_int16_t media_rotation_rate; + u_int16_t reserved218; +/*219*/ u_int16_t nv_cache_opt; +/*220*/ u_int16_t wrv_mode; + u_int16_t reserved221; +/*222*/ u_int16_t transport_major; +/*223*/ u_int16_t transport_minor; + u_int16_t reserved224[31]; +/*255*/ u_int16_t integrity; +} __packed; + + +/* ATA transfer modes */ +#define ATA_MODE_MASK 0x0f +#define ATA_DMA_MASK 0xf0 +#define ATA_PIO 0x00 +#define ATA_PIO0 0x08 +#define ATA_PIO1 0x09 +#define ATA_PIO2 0x0a +#define ATA_PIO3 0x0b +#define ATA_PIO4 0x0c +#define ATA_PIO_MAX 0x0f +#define ATA_DMA 0x10 +#define ATA_WDMA0 0x20 +#define ATA_WDMA1 0x21 +#define ATA_WDMA2 0x22 +#define ATA_UDMA0 0x40 +#define ATA_UDMA1 0x41 +#define ATA_UDMA2 0x42 +#define ATA_UDMA3 0x43 +#define ATA_UDMA4 0x44 +#define ATA_UDMA5 0x45 +#define ATA_UDMA6 0x46 +#define ATA_SA150 0x47 +#define ATA_SA300 0x48 +#define ATA_DMA_MAX 0x4f + + +/* ATA commands */ +#define ATA_NOP 0x00 /* NOP */ +#define ATA_NF_FLUSHQUEUE 0x00 /* flush queued cmd's */ +#define ATA_NF_AUTOPOLL 0x01 /* start autopoll function */ +#define ATA_DATA_SET_MANAGEMENT 0x06 +#define ATA_DSM_TRIM 0x01 +#define ATA_DEVICE_RESET 0x08 /* reset device */ +#define ATA_READ 0x20 /* read */ +#define ATA_READ48 0x24 /* read 48bit LBA */ +#define ATA_READ_DMA48 0x25 /* read DMA 48bit LBA */ +#define ATA_READ_DMA_QUEUED48 0x26 /* read DMA QUEUED 48bit LBA */ +#define ATA_READ_NATIVE_MAX_ADDRESS48 0x27 /* read native max addr 48bit */ +#define ATA_READ_MUL48 0x29 /* read multi 48bit LBA */ +#define ATA_READ_STREAM_DMA48 0x2a /* read DMA stream 48bit LBA */ +#define ATA_READ_STREAM48 0x2b /* read stream 48bit LBA */ +#define ATA_WRITE 0x30 /* write */ +#define ATA_WRITE48 0x34 /* write 48bit LBA */ +#define ATA_WRITE_DMA48 0x35 /* write DMA 48bit LBA */ +#define ATA_WRITE_DMA_QUEUED48 0x36 /* write DMA QUEUED 48bit LBA*/ +#define ATA_SET_MAX_ADDRESS48 0x37 /* set max address 48bit */ +#define ATA_WRITE_MUL48 0x39 /* write multi 48bit LBA */ +#define ATA_WRITE_STREAM_DMA48 0x3a +#define ATA_WRITE_STREAM48 0x3b +#define ATA_WRITE_DMA_FUA48 0x3d +#define ATA_WRITE_DMA_QUEUED_FUA48 0x3e +#define ATA_WRITE_LOG_EXT 0x3f +#define ATA_READ_VERIFY 0x40 +#define ATA_READ_VERIFY48 0x42 +#define ATA_READ_FPDMA_QUEUED 0x60 /* read DMA NCQ */ +#define ATA_WRITE_FPDMA_QUEUED 0x61 /* write DMA NCQ */ +#define ATA_SEEK 0x70 /* seek */ +#define ATA_PACKET_CMD 0xa0 /* packet command */ +#define ATA_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/ +#define ATA_SERVICE 0xa2 /* service command */ +#define ATA_SMART_CMD 0xb0 /* SMART command */ +#define ATA_CFA_ERASE 0xc0 /* CFA erase */ +#define ATA_READ_MUL 0xc4 /* read multi */ +#define ATA_WRITE_MUL 0xc5 /* write multi */ +#define ATA_SET_MULTI 0xc6 /* set multi size */ +#define ATA_READ_DMA_QUEUED 0xc7 /* read DMA QUEUED */ +#define ATA_READ_DMA 0xc8 /* read DMA */ +#define ATA_WRITE_DMA 0xca /* write DMA */ +#define ATA_WRITE_DMA_QUEUED 0xcc /* write DMA QUEUED */ +#define ATA_WRITE_MUL_FUA48 0xce +#define ATA_STANDBY_IMMEDIATE 0xe0 /* standby immediate */ +#define ATA_IDLE_IMMEDIATE 0xe1 /* idle immediate */ +#define ATA_STANDBY_CMD 0xe2 /* standby */ +#define ATA_IDLE_CMD 0xe3 /* idle */ +#define ATA_READ_BUFFER 0xe4 /* read buffer */ +#define ATA_READ_PM 0xe4 /* read portmultiplier */ +#define ATA_SLEEP 0xe6 /* sleep */ +#define ATA_FLUSHCACHE 0xe7 /* flush cache to disk */ +#define ATA_WRITE_PM 0xe8 /* write portmultiplier */ +#define ATA_FLUSHCACHE48 0xea /* flush cache to disk */ +#define ATA_ATA_IDENTIFY 0xec /* get ATA params */ +#define ATA_SETFEATURES 0xef /* features command */ +#define ATA_SF_SETXFER 0x03 /* set transfer mode */ +#define ATA_SF_ENAB_WCACHE 0x02 /* enable write cache */ +#define ATA_SF_DIS_WCACHE 0x82 /* disable write cache */ +#define ATA_SF_ENAB_PUIS 0x06 /* enable PUIS */ +#define ATA_SF_DIS_PUIS 0x86 /* disable PUIS */ +#define ATA_SF_PUIS_SPINUP 0x07 /* PUIS spin-up */ +#define ATA_SF_ENAB_RCACHE 0xaa /* enable readahead cache */ +#define ATA_SF_DIS_RCACHE 0x55 /* disable readahead cache */ +#define ATA_SF_ENAB_RELIRQ 0x5d /* enable release interrupt */ +#define ATA_SF_DIS_RELIRQ 0xdd /* disable release interrupt */ +#define ATA_SF_ENAB_SRVIRQ 0x5e /* enable service interrupt */ +#define ATA_SF_DIS_SRVIRQ 0xde /* disable service interrupt */ +#define ATA_SECURITY_FREEE_LOCK 0xf5 /* freeze security config */ +#define ATA_READ_NATIVE_MAX_ADDRESS 0xf8 /* read native max address */ +#define ATA_SET_MAX_ADDRESS 0xf9 /* set max address */ + + +/* ATAPI commands */ +#define ATAPI_TEST_UNIT_READY 0x00 /* check if device is ready */ +#define ATAPI_REZERO 0x01 /* rewind */ +#define ATAPI_REQUEST_SENSE 0x03 /* get sense data */ +#define ATAPI_FORMAT 0x04 /* format unit */ +#define ATAPI_READ 0x08 /* read data */ +#define ATAPI_WRITE 0x0a /* write data */ +#define ATAPI_WEOF 0x10 /* write filemark */ +#define ATAPI_WF_WRITE 0x01 +#define ATAPI_SPACE 0x11 /* space command */ +#define ATAPI_SP_FM 0x01 +#define ATAPI_SP_EOD 0x03 +#define ATAPI_INQUIRY 0x12 /* get inquiry data */ +#define ATAPI_MODE_SELECT 0x15 /* mode select */ +#define ATAPI_ERASE 0x19 /* erase */ +#define ATAPI_MODE_SENSE 0x1a /* mode sense */ +#define ATAPI_START_STOP 0x1b /* start/stop unit */ +#define ATAPI_SS_LOAD 0x01 +#define ATAPI_SS_RETENSION 0x02 +#define ATAPI_SS_EJECT 0x04 +#define ATAPI_PREVENT_ALLOW 0x1e /* media removal */ +#define ATAPI_READ_FORMAT_CAPACITIES 0x23 /* get format capacities */ +#define ATAPI_READ_CAPACITY 0x25 /* get volume capacity */ +#define ATAPI_READ_BIG 0x28 /* read data */ +#define ATAPI_WRITE_BIG 0x2a /* write data */ +#define ATAPI_LOCATE 0x2b /* locate to position */ +#define ATAPI_READ_POSITION 0x34 /* read position */ +#define ATAPI_SYNCHRONIZE_CACHE 0x35 /* flush buf, close channel */ +#define ATAPI_WRITE_BUFFER 0x3b /* write device buffer */ +#define ATAPI_READ_BUFFER 0x3c /* read device buffer */ +#define ATAPI_READ_SUBCHANNEL 0x42 /* get subchannel info */ +#define ATAPI_READ_TOC 0x43 /* get table of contents */ +#define ATAPI_PLAY_10 0x45 /* play by lba */ +#define ATAPI_PLAY_MSF 0x47 /* play by MSF address */ +#define ATAPI_PLAY_TRACK 0x48 /* play by track number */ +#define ATAPI_PAUSE 0x4b /* pause audio operation */ +#define ATAPI_READ_DISK_INFO 0x51 /* get disk info structure */ +#define ATAPI_READ_TRACK_INFO 0x52 /* get track info structure */ +#define ATAPI_RESERVE_TRACK 0x53 /* reserve track */ +#define ATAPI_SEND_OPC_INFO 0x54 /* send OPC structurek */ +#define ATAPI_MODE_SELECT_BIG 0x55 /* set device parameters */ +#define ATAPI_REPAIR_TRACK 0x58 /* repair track */ +#define ATAPI_READ_MASTER_CUE 0x59 /* read master CUE info */ +#define ATAPI_MODE_SENSE_BIG 0x5a /* get device parameters */ +#define ATAPI_CLOSE_TRACK 0x5b /* close track/session */ +#define ATAPI_READ_BUFFER_CAPACITY 0x5c /* get buffer capicity */ +#define ATAPI_SEND_CUE_SHEET 0x5d /* send CUE sheet */ +#define ATAPI_SERVICE_ACTION_IN 0x96 /* get service data */ +#define ATAPI_BLANK 0xa1 /* blank the media */ +#define ATAPI_SEND_KEY 0xa3 /* send DVD key structure */ +#define ATAPI_REPORT_KEY 0xa4 /* get DVD key structure */ +#define ATAPI_PLAY_12 0xa5 /* play by lba */ +#define ATAPI_LOAD_UNLOAD 0xa6 /* changer control command */ +#define ATAPI_READ_STRUCTURE 0xad /* get DVD structure */ +#define ATAPI_PLAY_CD 0xb4 /* universal play command */ +#define ATAPI_SET_SPEED 0xbb /* set drive speed */ +#define ATAPI_MECH_STATUS 0xbd /* get changer status */ +#define ATAPI_READ_CD 0xbe /* read data */ +#define ATAPI_POLL_DSC 0xff /* poll DSC status bit */ + + +struct ata_ioc_devices { + int channel; + char name[2][32]; + struct ata_params params[2]; +}; + +/* pr channel ATA ioctl calls */ +#define IOCATAGMAXCHANNEL _IOR('a', 1, int) +#define IOCATAREINIT _IOW('a', 2, int) +#define IOCATAATTACH _IOW('a', 3, int) +#define IOCATADETACH _IOW('a', 4, int) +#define IOCATADEVICES _IOWR('a', 5, struct ata_ioc_devices) + +/* ATAPI request sense structure */ +struct atapi_sense { + u_int8_t error; /* current or deferred errors */ +#define ATA_SENSE_VALID 0x80 + + u_int8_t segment; /* segment number */ + u_int8_t key; /* sense key */ +#define ATA_SENSE_KEY_MASK 0x0f /* sense key mask */ +#define ATA_SENSE_NO_SENSE 0x00 /* no specific sense key info */ +#define ATA_SENSE_RECOVERED_ERROR 0x01 /* command OK, data recovered */ +#define ATA_SENSE_NOT_READY 0x02 /* no access to drive */ +#define ATA_SENSE_MEDIUM_ERROR 0x03 /* non-recovered data error */ +#define ATA_SENSE_HARDWARE_ERROR 0x04 /* non-recoverable HW failure */ +#define ATA_SENSE_ILLEGAL_REQUEST 0x05 /* invalid command param(s) */ +#define ATA_SENSE_UNIT_ATTENTION 0x06 /* media changed */ +#define ATA_SENSE_DATA_PROTECT 0x07 /* write protect */ +#define ATA_SENSE_BLANK_CHECK 0x08 /* blank check */ +#define ATA_SENSE_VENDOR_SPECIFIC 0x09 /* vendor specific skey */ +#define ATA_SENSE_COPY_ABORTED 0x0a /* copy aborted */ +#define ATA_SENSE_ABORTED_COMMAND 0x0b /* command aborted, try again */ +#define ATA_SENSE_EQUAL 0x0c /* equal */ +#define ATA_SENSE_VOLUME_OVERFLOW 0x0d /* volume overflow */ +#define ATA_SENSE_MISCOMPARE 0x0e /* data dont match the medium */ +#define ATA_SENSE_RESERVED 0x0f +#define ATA_SENSE_ILI 0x20; +#define ATA_SENSE_EOM 0x40; +#define ATA_SENSE_FILEMARK 0x80; + + u_int32_t cmd_info; /* cmd information */ + u_int8_t sense_length; /* additional sense len (n-7) */ + u_int32_t cmd_specific_info; /* additional cmd spec info */ + u_int8_t asc; /* additional sense code */ + u_int8_t ascq; /* additional sense code qual */ + u_int8_t replaceable_unit_code; /* replaceable unit code */ + u_int8_t specific; /* sense key specific */ +#define ATA_SENSE_SPEC_VALID 0x80 +#define ATA_SENSE_SPEC_MASK 0x7f + + u_int8_t specific1; /* sense key specific */ + u_int8_t specific2; /* sense key specific */ +} __packed; + +struct ata_ioc_request { + union { + struct { + u_int8_t command; + u_int8_t feature; + u_int64_t lba; + u_int16_t count; + } ata; + struct { + char ccb[16]; + struct atapi_sense sense; + } atapi; + } u; + caddr_t data; + int count; + int flags; +#define ATA_CMD_CONTROL 0x01 +#define ATA_CMD_READ 0x02 +#define ATA_CMD_WRITE 0x04 +#define ATA_CMD_ATAPI 0x08 + + int timeout; + int error; +}; + +/* pr device ATA ioctl calls */ +#define IOCATAREQUEST _IOWR('a', 100, struct ata_ioc_request) +#define IOCATAGPARM _IOR('a', 101, struct ata_params) +#define IOCATAGMODE _IOR('a', 102, int) +#define IOCATASMODE _IOW('a', 103, int) + +#define IOCATAGSPINDOWN _IOR('a', 104, int) +#define IOCATASSPINDOWN _IOW('a', 105, int) + + +struct ata_ioc_raid_config { + int lun; + int type; +#define AR_JBOD 0x0001 +#define AR_SPAN 0x0002 +#define AR_RAID0 0x0004 +#define AR_RAID1 0x0008 +#define AR_RAID01 0x0010 +#define AR_RAID3 0x0020 +#define AR_RAID4 0x0040 +#define AR_RAID5 0x0080 + + int interleave; + int status; +#define AR_READY 1 +#define AR_DEGRADED 2 +#define AR_REBUILDING 4 + + int progress; + int total_disks; + int disks[16]; +}; + +struct ata_ioc_raid_status { + int lun; + int type; + int interleave; + int status; + int progress; + int total_disks; + struct { + int state; +#define AR_DISK_ONLINE 0x01 +#define AR_DISK_PRESENT 0x02 +#define AR_DISK_SPARE 0x04 + int lun; + } disks[16]; +}; + +/* ATA RAID ioctl calls */ +#define IOCATARAIDCREATE _IOWR('a', 200, struct ata_ioc_raid_config) +#define IOCATARAIDDELETE _IOW('a', 201, int) +#define IOCATARAIDSTATUS _IOWR('a', 202, struct ata_ioc_raid_status) +#define IOCATARAIDADDSPARE _IOW('a', 203, struct ata_ioc_raid_config) +#define IOCATARAIDREBUILD _IOW('a', 204, int) + +#endif /* _SYS_ATA_HH_ */ -- cgit v1.2.3