From f2ed769880271654297a4be420f26ab94d39666b Mon Sep 17 00:00:00 2001 From: Sebastian Huber Date: Thu, 30 Jan 2014 13:29:46 +0100 Subject: DHCPCD(8): Import Import DHCPCD(8) from: http://roy.marples.name/projects/dhcpcd/ The upstream sources can be obtained via: fossil clone http://roy.marples.name/projects/dhcpcd The imported version is 2014-01-29 19:46:44 [6b209507bb]. --- dhcpcd/dhcpcd-run-hooks.in | 342 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 342 insertions(+) create mode 100644 dhcpcd/dhcpcd-run-hooks.in (limited to 'dhcpcd/dhcpcd-run-hooks.in') diff --git a/dhcpcd/dhcpcd-run-hooks.in b/dhcpcd/dhcpcd-run-hooks.in new file mode 100644 index 00000000..e0ad618c --- /dev/null +++ b/dhcpcd/dhcpcd-run-hooks.in @@ -0,0 +1,342 @@ +#!/bin/sh +# dhcpcd client configuration script + +# Handy variables and functions for our hooks to use +case "$reason" in + ROUTERADVERT) + ifsuffix=":ra";; + INFORM6|BOUND6|RENEW6|REBIND6|REBOOT6|EXPIRE6|RELEASE6|STOP6) + ifsuffix=":dhcp6";; + *) + ifsuffix=;; +esac +ifname="$interface$ifsuffix" + +from=from +signature_base="# Generated by dhcpcd" +signature="$signature_base $from $ifname" +signature_base_end="# End of dhcpcd" +signature_end="$signature_base_end $from $ifname" +state_dir=@RUNDIR@/dhcpcd +_detected_init=false + +: ${if_up:=false} +: ${if_down:=false} + +# Ensure that all arguments are unique +uniqify() +{ + local result= i= + for i do + case " $result " in + *" $i "*);; + *) result="$result $i";; + esac + done + echo "${result# *}" +} + +# List interface config files in a directory. +# If dhcpcd is running as a single instance then it will have a list of +# interfaces in the preferred order. +# Otherwise we just use what we have. +list_interfaces() +{ + local i= x= ifaces= + for i in $interface_order; do + [ -e "$1/$i" ] && ifaces="$ifaces${ifaces:+ }$i" + done + for x in "$1"/*; do + [ -e "$x" ] || continue + for i in $interface_order; do + if [ $i = "${x##*/}" ]; then + unset x + break + fi + done + [ -n "$x" ] && ifaces="$ifaces${ifaces:+ }${x##*/}" + done + echo "$ifaces" +} + +# Trim function +trim() +{ + local var="$*" + + var=${var#"${var%%[![:space:]]*}"} + var=${var%"${var##*[![:space:]]}"} + if [ -z "$var" ]; then + # So it seems our shell doesn't support wctype(3) patterns + # Fall back to sed + var=$(echo "$*" | sed -e 's/^[[:space:]]*//;s/[[:space:]]*$//') + fi + printf %s "$var" +} + +# We normally use sed to extract values using a key from a list of files +# but sed may not always be available at the time. +key_get_value() +{ + local key="$1" value= x= line= + + shift + if type sed >/dev/null 2>&1; then + sed -n "s/^$key//p" $@ + else + for x do + while read line; do + case "$line" in + "$key"*) echo "${line##$key}";; + esac + done < "$x" + done + fi +} + +# We normally use sed to remove markers from a configuration file +# but sed may not always be available at the time. +remove_markers() +{ + local m1="$1" m2="$2" x= line= in_marker=0 + + shift; shift + if type sed >/dev/null 2>&1; then + sed "/^$m1/,/^$m2/d" $@ + else + for x do + while read line; do + case "$line" in + "$m1"*) in_marker=1;; + "$m2"*) in_marker=0;; + *) [ $in_marker = 0 ] && echo "$line";; + esac + done < "$x" + done + fi +} + +# Compare two files. +# If different, replace first with second otherwise remove second. +change_file() +{ + if [ -e "$1" ]; then + if type cmp >/dev/null 2>&1; then + cmp -s "$1" "$2" + elif type diff >/dev/null 2>&1; then + diff -q "$1" "$2" >/dev/null + else + # Hopefully we're only working on small text files ... + [ "$(cat "$1")" = "$(cat "$2")" ] + fi + if [ $? -eq 0 ]; then + rm -f "$2" + return 1 + fi + fi + cat "$2" > "$1" + rm -f "$2" + return 0 +} + +# Save a config file +save_conf() +{ + if [ -f "$1" ]; then + rm -f "$1-pre.$interface" + cat "$1" > "$1-pre.$interface" + fi +} + +# Restore a config file +restore_conf() +{ + [ -f "$1-pre.$interface" ] || return 1 + cat "$1-pre.$interface" > "$1" + rm -f "$1-pre.$interface" +} + +# Write a syslog entry +syslog() +{ + local lvl="$1" + + [ -n "$lvl" ] && shift + if [ -n "$*" ]; then + if type logger >/dev/null 2>&1; then + logger -t dhcpcd -p daemon."$lvl" -is "$interface: $*" + fi + fi +} + +# Check for a valid domain name as per RFC1123 with the exception of +# allowing - and _ as they seem to be widely used. +valid_domainname() +{ + local name="$1" label + + [ -z "$name" -o ${#name} -gt 255 ] && return 1 + + while [ -n "$name" ]; do + label="${name%%.*}" + [ -z "$label" -o ${#label} -gt 63 ] && return 1 + case "$label" in + -*|_*|*-|*_) return 1;; + *[![:alnum:]-_]*) return 1;; + esac + [ "$name" = "${name#*.}" ] && break + name="${name#*.}" + done + return 0 +} + +valid_domainname_list() +{ + local name + + for name do + valid_domainname "$name" || return $? + done + return 0 +} + +# Check for a valid path +valid_path() +{ + case "$@" in + *[![:alnum:]#%+-_:\.,@~\\/\[\]=\ ]*) return 1;; + esac + return 0 +} + +# With the advent of alternative init systems, it's possible to have +# more than one installed. So we need to try and guess what one we're +# using unless overriden by configure. +detect_init() +{ + _service_exists="@SERVICEEXISTS@" + _service_cmd="@SERVICECMD@" + _service_status="@SERVICESTATUS@" + + [ -n "$_service_cmd" ] && return 0 + + if ${_detected_init}; then + [ -n "$_service_cmd" ] + return $? + fi + + # Detect the running init system. + # As systemd and OpenRC can be installed on top of legacy init + # systems we try to detect them first. + _service_status= + if [ -x /bin/systemctl -a -S /run/systemd/private ]; then + _service_exists="/bin/systemctl --quiet is-enabled \$1.service" + _service_status="/bin/systemctl --quiet is-active \$1.service" + _service_cmd="/bin/systemctl \$2 \$1.service" + elif [ -x /usr/bin/systemctl -a -S /run/systemd/private ]; then + _service_exists="/usr/bin/systemctl --quiet is-enabled \$1.service" + _service_status="/usr/bin/systemctl --quiet is-active \$1.service" + _service_cmd="/usr/bin/systemctl \$2 \$1.service" + elif [ -x /sbin/rc-service -a \ + -s /libexec/rc/init.d/softlevel -o -s /run/openrc/softlevel ] + then + _service_exists="/sbin/rc-service -e \$1" + _service_cmd="/sbin/rc-service \$1 -- -D \$2" + elif [ -x /usr/sbin/invoke-rc.d ]; then + _service_exists="/usr/sbin/invoke-rc.d --query --quiet \$1 start >/dev/null 2>&1 || [ \$? = 104 ]" + _service_cmd="/usr/sbin/invoke-rc.d \$1 \$2" + elif [ -x /sbin/service ]; then + _service_exists="/sbin/service \$1 >/dev/null 2>&1" + _service_cmd="/sbin/service \$1 \$2" + elif [ -e /etc/slackware-version -a -d /etc/rc.d ]; then + _service_exists="[ -x /etc/rc.d/rc.\$1 ]" + _service_cmd="/etc/rc.d/rc.\$1 \$2" + _service_status="/etc/rc.d/rc.\$1 status 1>/dev/null 2>&1" + else + for x in /etc/init.d/rc.d /etc/rc.d /etc/init.d; do + if [ -d $x ]; then + _service_exists="[ -x $x/\$1 ]" + _service_cmd="$x/\$1 \$2" + break + fi + done + if [ -e /etc/arch-release ]; then + _service_status="[ -e /var/run/daemons/\$1 ]" + fi + fi + + _detected_init=true + if [ -z "$_service_cmd" ]; then + syslog err "could not detect a useable init system" + return 1 + fi + return 0 +} + +# Check a system service exists +service_exists() +{ + + if [ -z "$_service_exists" ]; then + detect_init || return 1 + fi + eval $_service_exists +} + +# Send a command to a system service +service_cmd() +{ + + if [ -z "$_service_cmd" ]; then + detect_init || return 1 + fi + eval $_service_cmd +} + +# Send a command to a system service if it is running +service_status() +{ + + if [ -z "$_service_cmd" ]; then + detect_init || return 1 + fi + if [ -n "$_service_status" ]; then + eval $_service_status + else + service_command $1 status >/dev/null 2>&1 + fi +} + +# Handy macros for our hooks +service_command() +{ + + service_exists $1 && service_cmd $1 $2 +} +service_condcommand() +{ + + service_exists $1 && service_status $1 && service_cmd $1 $2 +} + +# We source each script into this one so that scripts run earlier can +# remove variables from the environment so later scripts don't see them. +# Thus, the user can create their dhcpcd.enter/exit-hook script to configure +# /etc/resolv.conf how they want and stop the system scripts ever updating it. +for hook in \ + @SYSCONFDIR@/dhcpcd.enter-hook \ + @HOOKDIR@/* \ + @SYSCONFDIR@/dhcpcd.exit-hook +do + for skip in $skip_hooks; do + case "$hook" in + */*~) continue 2;; + */"$skip") continue 2;; + */[0-9][0-9]"-$skip") continue 2;; + */[0-9][0-9]"-$skip.sh") continue 2;; + esac + done + if [ -f "$hook" ]; then + . "$hook" + fi +done -- cgit v1.2.3