blob: f5f92909d2c09f33651900774d878eb5821e3de4 (
plain) (
blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
|
.. comment SPDX-License-Identifier: CC-BY-SA-4.0
.. Copyright (C) 2017, 2018 embedded brains GmbH
arm (ARM)
*********
altera-cyclone-v
================
TODO.
atsam
=====
TODO.
beagle
======
TODO.
csb336
======
TODO.
csb337
======
TODO.
edb7312
=======
TODO.
gdbarmsim
=========
TODO.
gumstix
=======
TODO.
imx (NXP i.MX)
==============
This BSP offers only one variant, the `imx7`. This variant supports the i.MX
7Dual processor. The basic hardware initialization is not performed by the
BSP. A boot loader with device tree support must be used to start the BSP,
e.g. U-Boot.
Build Configuration Options
---------------------------
The following options are available at the configure command line.
``BSP_PRESS_KEY_FOR_RESET``
If defined to a non-zero value, then print a message and wait until pressed
before resetting board when application terminates.
``BSP_RESET_BOARD_AT_EXIT``
If defined to a non-zero value, then reset the board when the application
terminates.
``BSP_PRINT_EXCEPTION_CONTEXT``
If defined to a non-zero value, then print the exception context when an
unexpected exception occurs.
``BSP_FDT_BLOB_SIZE_MAX``
The maximum size of the device tree blob in bytes (default is 262144).
``CONSOLE_USE_INTERRUPTS``
Use interrupt driven mode for console devices (enabled by default).
``IMX_CCM_IPG_HZ``
The IPG clock frequency in Hz (default is 67500000).
``IMX_CCM_UART_HZ``
The UART clock frequency in Hz (default is 24000000).
``IMX_CCM_AHB_HZ``
The AHB clock frequency in Hz (default is 135000000).
Boot via U-Boot
---------------
The application executable file (ELF file) must be converted to an U-Boot
image. Use the following commands:
::
arm-rtems5-objcopy -O binary app.exe app.bin
gzip -9 -f -c app.bin > app.bin.gz
mkimage -A arm -O linux -T kernel -a 0x80200000 -e 0x80200000 -n RTEMS -d app.bin.gz app.img
Use the following U-Boot commands to boot an application via TFTP download:
::
tftpboot ${loadaddr} app.img && run loadfdt && bootm ${loadaddr} - ${fdt_addr} ; reset
Clock Driver
------------
The clock driver uses the `ARMv7-AR Generic Timer`.
Console Driver
--------------
The console driver supports up to seven on-chip UARTs. They are initialized
according to the device tree. The console driver does not configure the pins.
I2C Driver
----------
I2C drivers are registered by the ``i2c_bus_register_imx()`` function. The I2C
driver does not configure the pins.
.. code-block:: c
#include <assert.h>
#include <bsp.h>
void i2c_init(void)
{
int rv;
rv = i2c_bus_register_imx("/dev/i2c-0", "i2c0");
assert(rv == 0);
}
SPI Driver
----------
SPI drivers are registered by the ``spi_bus_register_imx()`` function. The SPI
driver configures the pins according to the ``pinctrl-0`` device tree property.
SPI transfers with a continuous chip select are limited by the FIFO size of 64
bytes. The driver has no DMA support.
.. code-block:: c
#include <assert.h>
#include <bsp.h>
void spi_init(void)
{
int rv;
rv = spi_bus_register_imx("/dev/spi-0", "spi0");
assert(rv == 0);
}
Network Interface Driver
------------------------
The network interface driver is provided by the `libbsd`. It is initialized
according to the device tree. It supports checksum offload and interrupt
coalescing. IPv6 transmit checksum offload is not implemented. The interrupt
coalescing uses the MII/GMII clocks and can be controlled by the following
system controls:
* ``dev.ffec.<unit>.int_coal.rx_time``
* ``dev.ffec.<unit>.int_coal.rx_count``
* ``dev.ffec.<unit>.int_coal.tx_time``
* ``dev.ffec.<unit>.int_coal.tx_count``
A value of zero for the time or count disables the interrupt coalescing in the
corresponding direction.
MMC/SDCard Driver
-----------------
The MMC/SDCard driver (uSDHC module) is provided by the `libbsd`. It is
initialized according to the device tree. Pin re-configuration according to
the serial clock frequency is not supported. Data transfers are extremely
slow. This is probably due to the missing DMA support.
Caveats
-------
The clock and pin configuration support is quite rudimentary and mostly relies
on the boot loader. For a pin group configuration see
``imx_iomux_configure_pins()``. There is no power management support.
lm3s69xx
========
TODO.
lpc176x
=======
TODO.
lpc24xx
=======
TODO.
lpc32xx
=======
TODO.
raspberrypi
===========
TODO.
realview-pbx-a9
===============
TODO.
rtl22xx
=======
TODO.
smdk2410
========
TODO.
stm32f4
=======
TODO.
tms570
======
TODO.
xilinx-zynq
===========
TODO.
|
