.. comment SPDX-License-Identifier: CC-BY-SA-4.0 .. COMMENT: COPYRIGHT (c) 1988-2008. .. COMMENT: On-Line Applications Research Corporation (OAR). .. COMMENT: All rights reserved. Timer Manager ************* .. index:: timers Introduction ============ The timer manager provides support for timer facilities. The directives provided by the timer manager are: - rtems_timer_create_ - Create a timer - rtems_timer_ident_ - Get ID of a timer - rtems_timer_cancel_ - Cancel a timer - rtems_timer_delete_ - Delete a timer - rtems_timer_fire_after_ - Fire timer after interval - rtems_timer_fire_when_ - Fire timer when specified - rtems_timer_initiate_server_ - Initiate server for task-based timers - rtems_timer_server_fire_after_ - Fire task-based timer after interval - rtems_timer_server_fire_when_ - Fire task-based timer when specified - rtems_timer_reset_ - Reset an interval timer Background ========== Required Support ---------------- A clock tick is required to support the functionality provided by this manager. Timers ------ A timer is an RTEMS object which allows the application to schedule operations to occur at specific times in the future. User supplied timer service routines are invoked by either a clock tick directive or a special Timer Server task when the timer fires. Timer service routines may perform any operations or directives which normally would be performed by the application code which invoked a clock tick directive. The timer can be used to implement watchdog routines which only fire to denote that an application error has occurred. The timer is reset at specific points in the application to ensure that the watchdog does not fire. Thus, if the application does not reset the watchdog timer, then the timer service routine will fire to indicate that the application has failed to reach a reset point. This use of a timer is sometimes referred to as a "keep alive" or a "deadman" timer. Timer Server ------------ The Timer Server task is responsible for executing the timer service routines associated with all task-based timers. This task executes at a priority higher than any RTEMS application task, and is created non-preemptible, and thus can be viewed logically as the lowest priority interrupt. By providing a mechanism where timer service routines execute in task rather than interrupt space, the application is allowed a bit more flexibility in what operations a timer service routine can perform. For example, the Timer Server can be configured to have a floating point context in which case it would be safe to perform floating point operations from a task-based timer. Most of the time, executing floating point instructions from an interrupt service routine is not considered safe. However, since the Timer Server task is non-preemptible, only directives allowed from an ISR can be called in the timer service routine. The Timer Server is designed to remain blocked until a task-based timer fires. This reduces the execution overhead of the Timer Server. Timer Service Routines ---------------------- The timer service routine should adhere to C calling conventions and have a prototype similar to the following: .. index:: rtems_timer_service_routine .. code-block:: c rtems_timer_service_routine user_routine( rtems_id timer_id, void *user_data ); Where the timer_id parameter is the RTEMS object ID of the timer which is being fired and user_data is a pointer to user-defined information which may be utilized by the timer service routine. The argument user_data may be NULL. Operations ========== Creating a Timer ---------------- The ``rtems_timer_create`` directive creates a timer by allocating a Timer Control Block (TMCB), assigning the timer a user-specified name, and assigning it a timer ID. Newly created timers do not have a timer service routine associated with them and are not active. Obtaining Timer IDs ------------------- When a timer is created, RTEMS generates a unique timer ID and assigns it to the created timer until it is deleted. The timer ID may be obtained by either of two methods. First, as the result of an invocation of the ``rtems_timer_create`` directive, the timer ID is stored in a user provided location. Second, the timer ID may be obtained later using the ``rtems_timer_ident`` directive. The timer ID is used by other directives to manipulate this timer. Initiating an Interval Timer ---------------------------- The ``rtems_timer_fire_after`` and ``rtems_timer_server_fire_after`` directives initiate a timer to fire a user provided timer service routine after the specified number of clock ticks have elapsed. When the interval has elapsed, the timer service routine will be invoked from a clock tick directive if it was initiated by the ``rtems_timer_fire_after`` directive and from the Timer Server task if initiated by the ``rtems_timer_server_fire_after`` directive. Initiating a Time of Day Timer ------------------------------ The ``rtems_timer_fire_when`` and ``rtems_timer_server_fire_when`` directive initiate a timer to fire a user provided timer service routine when the specified time of day has been reached. When the interval has elapsed, the timer service routine will be invoked from a clock tick directive by the ``rtems_timer_fire_when`` directive and from the Timer Server task if initiated by the ``rtems_timer_server_fire_when`` directive. Canceling a Timer ----------------- The ``rtems_timer_cancel`` directive is used to halt the specified timer. Once canceled, the timer service routine will not fire unless the timer is reinitiated. The timer can be reinitiated using the ``rtems_timer_reset``, ``rtems_timer_fire_after``, and ``rtems_timer_fire_when`` directives. Resetting a Timer ----------------- The ``rtems_timer_reset`` directive is used to restore an interval timer initiated by a previous invocation of ``rtems_timer_fire_after`` or ``rtems_timer_server_fire_after`` to its original interval length. If the timer has not been used or the last usage of this timer was by the ``rtems_timer_fire_when`` or ``rtems_timer_server_fire_when`` directive, then an error is returned. The timer service routine is not changed or fired by this directive. Initiating the Timer Server --------------------------- The ``rtems_timer_initiate_server`` directive is used to allocate and start the execution of the Timer Server task. The application can specify both the stack size and attributes of the Timer Server. The Timer Server executes at a priority higher than any application task and thus the user can expect to be preempted as the result of executing the ``rtems_timer_initiate_server`` directive. Deleting a Timer ---------------- The ``rtems_timer_delete`` directive is used to delete a timer. If the timer is running and has not expired, the timer is automatically canceled. The timer's control block is returned to the TMCB free list when it is deleted. A timer can be deleted by a task other than the task which created the timer. Any subsequent references to the timer's name and ID are invalid. Directives ========== This section details the timer manager's directives. A subsection is dedicated to each of this manager's directives and describes the calling sequence, related constants, usage, and status codes. .. raw:: latex \clearpage .. _rtems_timer_create: TIMER_CREATE - Create a timer ----------------------------- .. index:: create a timer .. index:: rtems_timer_create CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_timer_create( rtems_name name, rtems_id *id ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - timer created successfully * - ``RTEMS_INVALID_ADDRESS`` - ``id`` is NULL * - ``RTEMS_INVALID_NAME`` - invalid timer name * - ``RTEMS_TOO_MANY`` - too many timers created DESCRIPTION: This directive creates a timer. The assigned timer id is returned in id. This id is used to access the timer with other timer manager directives. For control and maintenance of the timer, RTEMS allocates a TMCB from the local TMCB free pool and initializes it. NOTES: This directive will not cause the calling task to be preempted. .. raw:: latex \clearpage .. _rtems_timer_ident: TIMER_IDENT - Get ID of a timer ------------------------------- .. index:: obtain the ID of a timer .. index:: rtems_timer_ident CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_timer_ident( rtems_name name, rtems_id *id ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - timer identified successfully * - ``RTEMS_INVALID_ADDRESS`` - ``id`` is NULL * - ``RTEMS_INVALID_NAME`` - timer name not found DESCRIPTION: This directive obtains the timer id associated with the timer name to be acquired. If the timer name is not unique, then the timer id will match one of the timers with that name. However, this timer id is not guaranteed to correspond to the desired timer. The timer id is used to access this timer in other timer related directives. NOTES: This directive will not cause the running task to be preempted. .. raw:: latex \clearpage .. _rtems_timer_cancel: TIMER_CANCEL - Cancel a timer ----------------------------- .. index:: cancel a timer .. index:: rtems_timer_cancel CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_timer_cancel( rtems_id id ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - timer canceled successfully * - ``RTEMS_INVALID_ID`` - invalid timer id DESCRIPTION: This directive cancels the timer id. This timer will be reinitiated by the next invocation of ``rtems_timer_reset``, ``rtems_timer_fire_after``, or ``rtems_timer_fire_when`` with this id. NOTES: This directive will not cause the running task to be preempted. .. raw:: latex \clearpage .. _rtems_timer_delete: TIMER_DELETE - Delete a timer ----------------------------- .. index:: delete a timer .. index:: rtems_timer_delete CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_timer_delete( rtems_id id ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - timer deleted successfully * - ``RTEMS_INVALID_ID`` - invalid timer id DESCRIPTION: This directive deletes the timer specified by id. If the timer is running, it is automatically canceled. The TMCB for the deleted timer is reclaimed by RTEMS. NOTES: This directive will not cause the running task to be preempted. A timer can be deleted by a task other than the task which created the timer. .. raw:: latex \clearpage .. _rtems_timer_fire_after: TIMER_FIRE_AFTER - Fire timer after interval -------------------------------------------- .. index:: fire a timer after an interval .. index:: rtems_timer_fire_after CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_timer_fire_after( rtems_id id, rtems_interval ticks, rtems_timer_service_routine_entry routine, void *user_data ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - timer initiated successfully * - ``RTEMS_INVALID_ADDRESS`` - ``routine`` is NULL * - ``RTEMS_INVALID_ID`` - invalid timer id * - ``RTEMS_INVALID_NUMBER`` - invalid interval DESCRIPTION: This directive initiates the timer specified by id. If the timer is running, it is automatically canceled before being initiated. The timer is scheduled to fire after an interval ticks clock ticks has passed. When the timer fires, the timer service routine routine will be invoked with the argument user_data. NOTES: This directive will not cause the running task to be preempted. .. raw:: latex \clearpage .. _rtems_timer_fire_when: TIMER_FIRE_WHEN - Fire timer when specified ------------------------------------------- .. index:: fire a timer at wall time .. index:: rtems_timer_fire_when CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_timer_fire_when( rtems_id id, rtems_time_of_day *wall_time, rtems_timer_service_routine_entry routine, void *user_data ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - timer initiated successfully * - ``RTEMS_INVALID_ADDRESS`` - ``routine`` is NULL * - ``RTEMS_INVALID_ADDRESS`` - ``wall_time`` is NULL * - ``RTEMS_INVALID_ID`` - invalid timer id * - ``RTEMS_NOT_DEFINED`` - system date and time is not set * - ``RTEMS_INVALID_CLOCK`` - invalid time of day DESCRIPTION: This directive initiates the timer specified by id. If the timer is running, it is automatically canceled before being initiated. The timer is scheduled to fire at the time of day specified by wall_time. When the timer fires, the timer service routine routine will be invoked with the argument user_data. NOTES: This directive will not cause the running task to be preempted. .. raw:: latex \clearpage .. _rtems_timer_initiate_server: TIMER_INITIATE_SERVER - Initiate server for task-based timers ------------------------------------------------------------- .. index:: initiate the Timer Server .. index:: rtems_timer_initiate_server CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_timer_initiate_server( uint32_t priority, uint32_t stack_size, rtems_attribute attribute_set ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - Timer Server initiated successfully * - ``RTEMS_TOO_MANY`` - too many tasks created DESCRIPTION: This directive initiates the Timer Server task. This task is responsible for executing all timers initiated via the ``rtems_timer_server_fire_after`` or ``rtems_timer_server_fire_when`` directives. NOTES: This directive could cause the calling task to be preempted. The Timer Server task is created using the ``rtems_task_create`` service and must be accounted for when configuring the system. Even through this directive invokes the ``rtems_task_create`` and ``rtems_task_start`` directives, it should only fail due to resource allocation problems. .. raw:: latex \clearpage .. _rtems_timer_server_fire_after: TIMER_SERVER_FIRE_AFTER - Fire task-based timer after interval -------------------------------------------------------------- .. index:: fire task-based a timer after an interval .. index:: rtems_timer_server_fire_after CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_timer_server_fire_after( rtems_id id, rtems_interval ticks, rtems_timer_service_routine_entry routine, void *user_data ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - timer initiated successfully * - ``RTEMS_INVALID_ADDRESS`` - ``routine`` is NULL * - ``RTEMS_INVALID_ID`` - invalid timer id * - ``RTEMS_INVALID_NUMBER`` - invalid interval * - ``RTEMS_INCORRECT_STATE`` - Timer Server not initiated DESCRIPTION: This directive initiates the timer specified by id and specifies that when it fires it will be executed by the Timer Server. If the timer is running, it is automatically canceled before being initiated. The timer is scheduled to fire after an interval ticks clock ticks has passed. When the timer fires, the timer service routine routine will be invoked with the argument user_data. NOTES: This directive will not cause the running task to be preempted. .. raw:: latex \clearpage .. _rtems_timer_server_fire_when: TIMER_SERVER_FIRE_WHEN - Fire task-based timer when specified ------------------------------------------------------------- .. index:: fire a task-based timer at wall time .. index:: rtems_timer_server_fire_when CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_timer_server_fire_when( rtems_id id, rtems_time_of_day *wall_time, rtems_timer_service_routine_entry routine, void *user_data ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - timer initiated successfully * - ``RTEMS_INVALID_ADDRESS`` - ``routine`` is NULL * - ``RTEMS_INVALID_ADDRESS`` - ``wall_time`` is NULL * - ``RTEMS_INVALID_ID`` - invalid timer id * - ``RTEMS_NOT_DEFINED`` - system date and time is not set * - ``RTEMS_INVALID_CLOCK`` - invalid time of day * - ``RTEMS_INCORRECT_STATE`` - Timer Server not initiated DESCRIPTION: This directive initiates the timer specified by id and specifies that when it fires it will be executed by the Timer Server. If the timer is running, it is automatically canceled before being initiated. The timer is scheduled to fire at the time of day specified by wall_time. When the timer fires, the timer service routine routine will be invoked with the argument user_data. NOTES: This directive will not cause the running task to be preempted. .. raw:: latex \clearpage .. _rtems_timer_reset: TIMER_RESET - Reset an interval timer ------------------------------------- .. index:: reset a timer .. index:: rtems_timer_reset CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_timer_reset( rtems_id id ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - timer reset successfully * - ``RTEMS_INVALID_ID`` - invalid timer id * - ``RTEMS_NOT_DEFINED`` - attempted to reset a when or newly created timer DESCRIPTION: This directive resets the timer associated with id. This timer must have been previously initiated with either the ``rtems_timer_fire_after`` or ``rtems_timer_server_fire_after`` directive. If active the timer is canceled, after which the timer is reinitiated using the same interval and timer service routine which the original ``rtems_timer_fire_after`` or ``rtems_timer_server_fire_after`` directive used. NOTES: If the timer has not been used or the last usage of this timer was by a ``rtems_timer_fire_when`` or ``rtems_timer_server_fire_when`` directive, then the ``RTEMS_NOT_DEFINED`` error is returned. Restarting a cancelled after timer results in the timer being reinitiated with its previous timer service routine and interval. This directive will not cause the running task to be preempted.