.. comment SPDX-License-Identifier: CC-BY-SA-4.0 .. COMMENT: COPYRIGHT (c) 1988-2008. .. COMMENT: On-Line Applications Research Corporation (OAR). .. COMMENT: All rights reserved. .. index:: messages .. index:: message queues Message Manager *************** Introduction ============ The message manager provides communication and synchronization capabilities using RTEMS message queues. The directives provided by the message manager are: - rtems_message_queue_create_ - Create a queue - rtems_message_queue_ident_ - Get ID of a queue - rtems_message_queue_delete_ - Delete a queue - rtems_message_queue_send_ - Put message at rear of a queue - rtems_message_queue_urgent_ - Put message at front of a queue - rtems_message_queue_broadcast_ - Broadcast N messages to a queue - rtems_message_queue_receive_ - Receive message from a queue - rtems_message_queue_get_number_pending_ - Get number of messages pending on a queue - rtems_message_queue_flush_ - Flush all messages on a queue Background ========== Messages -------- A message is a variable length buffer where information can be stored to support communication. The length of the message and the information stored in that message are user-defined and can be actual data, pointer(s), or empty. Message Queues -------------- A message queue permits the passing of messages among tasks and ISRs. Message queues can contain a variable number of messages. Normally messages are sent to and received from the queue in FIFO order using the ``rtems_message_queue_send`` directive. However, the ``rtems_message_queue_urgent`` directive can be used to place messages at the head of a queue in LIFO order. Synchronization can be accomplished when a task can wait for a message to arrive at a queue. Also, a task may poll a queue for the arrival of a message. The maximum length message which can be sent is set on a per message queue basis. The message content must be copied in general to/from an internal buffer of the message queue or directly to a peer in certain cases. This copy operation is performed with interrupts disabled. So it is advisable to keep the messages as short as possible. .. index:: message queue attributes Building a Message Queue Attribute Set -------------------------------------- In general, an attribute set is built by a bitwise OR of the desired attribute components. The set of valid message queue attributes is provided in the following table: .. list-table:: :class: rtems-table * - ``RTEMS_FIFO`` - tasks wait by FIFO (default) * - ``RTEMS_PRIORITY`` - tasks wait by priority * - ``RTEMS_LOCAL`` - local message queue (default) * - ``RTEMS_GLOBAL`` - global message queue An attribute listed as a default is not required to appear in the attribute list, although it is a good programming practice to specify default attributes. If all defaults are desired, the attribute ``RTEMS_DEFAULT_ATTRIBUTES`` should be specified on this call. This example demonstrates the attribute_set parameter needed to create a local message queue with the task priority waiting queue discipline. The attribute_set parameter to the ``rtems_message_queue_create`` directive could be either ``RTEMS_PRIORITY`` or ``RTEMS_LOCAL | RTEMS_PRIORITY``. The attribute_set parameter can be set to ``RTEMS_PRIORITY`` because ``RTEMS_LOCAL`` is the default for all created message queues. If a similar message queue were to be known globally, then the attribute_set parameter would be ``RTEMS_GLOBAL | RTEMS_PRIORITY``. Building a MESSAGE_QUEUE_RECEIVE Option Set ------------------------------------------- In general, an option is built by a bitwise OR of the desired option components. The set of valid options for the ``rtems_message_queue_receive`` directive are listed in the following table: .. list-table:: :class: rtems-table * - ``RTEMS_WAIT`` - task will wait for a message (default) * - ``RTEMS_NO_WAIT`` - task should not wait An option listed as a default is not required to appear in the option OR list, although it is a good programming practice to specify default options. If all defaults are desired, the option ``RTEMS_DEFAULT_OPTIONS`` should be specified on this call. This example demonstrates the option parameter needed to poll for a message to arrive. The option parameter passed to the ``rtems_message_queue_receive`` directive should be ``RTEMS_NO_WAIT``. Operations ========== Creating a Message Queue ------------------------ The ``rtems_message_queue_create`` directive creates a message queue with the user-defined name. The user specifies the maximum message size and maximum number of messages which can be placed in the message queue at one time. The user may select FIFO or task priority as the method for placing waiting tasks in the task wait queue. RTEMS allocates a Queue Control Block (QCB) from the QCB free list to maintain the newly created queue as well as memory for the message buffer pool associated with this message queue. RTEMS also generates a message queue ID which is returned to the calling task. For GLOBAL message queues, the maximum message size is effectively limited to the longest message which the MPCI is capable of transmitting. Obtaining Message Queue IDs --------------------------- When a message queue is created, RTEMS generates a unique message queue ID. The message queue ID may be obtained by either of two methods. First, as the result of an invocation of the ``rtems_message_queue_create`` directive, the queue ID is stored in a user provided location. Second, the queue ID may be obtained later using the ``rtems_message_queue_ident`` directive. The queue ID is used by other message manager directives to access this message queue. Receiving a Message ------------------- The ``rtems_message_queue_receive`` directive attempts to retrieve a message from the specified message queue. If at least one message is in the queue, then the message is removed from the queue, copied to the caller's message buffer, and returned immediately along with the length of the message. When messages are unavailable, one of the following situations applies: - By default, the calling task will wait forever for the message to arrive. - Specifying the ``RTEMS_NO_WAIT`` option forces an immediate return with an error status code. - Specifying a timeout limits the period the task will wait before returning with an error status. If the task waits for a message, then it is placed in the message queue's task wait queue in either FIFO or task priority order. All tasks waiting on a message queue are returned an error code when the message queue is deleted. Sending a Message ----------------- Messages can be sent to a queue with the ``rtems_message_queue_send`` and ``rtems_message_queue_urgent`` directives. These directives work identically when tasks are waiting to receive a message. A task is removed from the task waiting queue, unblocked, and the message is copied to a waiting task's message buffer. When no tasks are waiting at the queue, ``rtems_message_queue_send`` places the message at the rear of the message queue, while ``rtems_message_queue_urgent`` places the message at the front of the queue. The message is copied to a message buffer from this message queue's buffer pool and then placed in the message queue. Neither directive can successfully send a message to a message queue which has a full queue of pending messages. Broadcasting a Message ---------------------- The ``rtems_message_queue_broadcast`` directive sends the same message to every task waiting on the specified message queue as an atomic operation. The message is copied to each waiting task's message buffer and each task is unblocked. The number of tasks which were unblocked is returned to the caller. Deleting a Message Queue ------------------------ The ``rtems_message_queue_delete`` directive removes a message queue from the system and frees its control block as well as the memory associated with this message queue's message buffer pool. A message queue can be deleted by any local task that knows the message queue's ID. As a result of this directive, all tasks blocked waiting to receive a message from the message queue will be readied and returned a status code which indicates that the message queue was deleted. Any subsequent references to the message queue's name and ID are invalid. Any messages waiting at the message queue are also deleted and deallocated. Directives ========== This section details the message manager's directives. A subsection is dedicated to each of this manager's directives and describes the calling sequence, related constants, usage, and status codes. .. raw:: latex \clearpage .. index:: create a message queue .. index:: rtems_message_queue_create .. _rtems_message_queue_create: MESSAGE_QUEUE_CREATE - Create a queue ------------------------------------- CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_message_queue_create( rtems_name name, uint32_t count, size_t max_message_size, rtems_attribute attribute_set, rtems_id *id ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - queue created successfully * - ``RTEMS_INVALID_NAME`` - invalid queue name * - ``RTEMS_INVALID_ADDRESS`` - ``id`` is NULL * - ``RTEMS_INVALID_NUMBER`` - invalid message count * - ``RTEMS_INVALID_SIZE`` - invalid message size * - ``RTEMS_TOO_MANY`` - too many queues created * - ``RTEMS_UNSATISFIED`` - unable to allocate message buffers * - ``RTEMS_MP_NOT_CONFIGURED`` - multiprocessing not configured * - ``RTEMS_TOO_MANY`` - too many global objects DESCRIPTION: This directive creates a message queue which resides on the local node with the user-defined name specified in name. For control and maintenance of the queue, RTEMS allocates and initializes a QCB. Memory is allocated from the RTEMS Workspace for the specified count of messages, each of max_message_size bytes in length. The RTEMS-assigned queue id, returned in id, is used to access the message queue. Specifying ``RTEMS_PRIORITY`` in attribute_set causes tasks waiting for a message to be serviced according to task priority. When ``RTEMS_FIFO`` is specified, waiting tasks are serviced in First In-First Out order. NOTES: This directive will not cause the calling task to be preempted. The following message queue attribute constants are defined by RTEMS: .. list-table:: :class: rtems-table * - ``RTEMS_FIFO`` - tasks wait by FIFO (default) * - ``RTEMS_PRIORITY`` - tasks wait by priority * - ``RTEMS_LOCAL`` - local message queue (default) * - ``RTEMS_GLOBAL`` - global message queue Message queues should not be made global unless remote tasks must interact with the created message queue. This is to avoid the system overhead incurred by the creation of a global message queue. When a global message queue is created, the message queue's name and id must be transmitted to every node in the system for insertion in the local copy of the global object table. For GLOBAL message queues, the maximum message size is effectively limited to the longest message which the MPCI is capable of transmitting. The total number of global objects, including message queues, is limited by the ``maximum_global_objects`` field in the configuration table. .. raw:: latex \clearpage .. index:: get ID of a message queue .. index:: rtems_message_queue_ident .. _rtems_message_queue_ident: MESSAGE_QUEUE_IDENT - Get ID of a queue --------------------------------------- CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_message_queue_ident( rtems_name name, uint32_t node, rtems_id *id ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - queue identified successfully * - ``RTEMS_INVALID_ADDRESS`` - ``id`` is NULL * - ``RTEMS_INVALID_NAME`` - queue name not found * - ``RTEMS_INVALID_NODE`` - invalid node id DESCRIPTION: This directive obtains the queue id associated with the queue name specified in name. If the queue name is not unique, then the queue id will match one of the queues with that name. However, this queue id is not guaranteed to correspond to the desired queue. The queue id is used with other message related directives to access the message queue. NOTES: This directive will not cause the running task to be preempted. If node is ``RTEMS_SEARCH_ALL_NODES``, all nodes are searched with the local node being searched first. All other nodes are searched with the lowest numbered node searched first. If node is a valid node number which does not represent the local node, then only the message queues exported by the designated node are searched. This directive does not generate activity on remote nodes. It accesses only the local copy of the global object table. .. raw:: latex \clearpage .. index:: delete a message queue .. index:: rtems_message_queue_delete .. _rtems_message_queue_delete: MESSAGE_QUEUE_DELETE - Delete a queue ------------------------------------- CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_message_queue_delete( rtems_id id ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - queue deleted successfully * - ``RTEMS_INVALID_ID`` - invalid queue id * - ``RTEMS_ILLEGAL_ON_REMOTE_OBJECT`` - cannot delete remote queue DESCRIPTION: This directive deletes the message queue specified by ``id``. As a result of this directive, all tasks blocked waiting to receive a message from this queue will be readied and returned a status code which indicates that the message queue was deleted. If no tasks are waiting, but the queue contains messages, then RTEMS returns these message buffers back to the system message buffer pool. The QCB for this queue as well as the memory for the message buffers is reclaimed by RTEMS. NOTES: The calling task will be preempted if its preemption mode is enabled and one or more local tasks with a higher priority than the calling task are waiting on the deleted queue. The calling task will NOT be preempted if the tasks that are waiting are remote tasks. The calling task does not have to be the task that created the queue, although the task and queue must reside on the same node. When the queue is deleted, any messages in the queue are returned to the free message buffer pool. Any information stored in those messages is lost. When a global message queue is deleted, the message queue id must be transmitted to every node in the system for deletion from the local copy of the global object table. Proxies, used to represent remote tasks, are reclaimed when the message queue is deleted. .. raw:: latex \clearpage .. index:: send message to a queue .. index:: rtems_message_queue_send .. _rtems_message_queue_send: MESSAGE_QUEUE_SEND - Put message at rear of a queue --------------------------------------------------- CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_message_queue_send( rtems_id id, const void *buffer, size_t size ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - message sent successfully * - ``RTEMS_INVALID_ID`` - invalid queue id * - ``RTEMS_INVALID_SIZE`` - invalid message size * - ``RTEMS_INVALID_ADDRESS`` - ``buffer`` is NULL * - ``RTEMS_UNSATISFIED`` - out of message buffers * - ``RTEMS_TOO_MANY`` - queue's limit has been reached DESCRIPTION: This directive sends the message buffer of size bytes in length to the queue specified by id. If a task is waiting at the queue, then the message is copied to the waiting task's buffer and the task is unblocked. If no tasks are waiting at the queue, then the message is copied to a message buffer which is obtained from this message queue's message buffer pool. The message buffer is then placed at the rear of the queue. NOTES: The calling task will be preempted if it has preemption enabled and a higher priority task is unblocked as the result of this directive. Sending a message to a global message queue which does not reside on the local node will generate a request to the remote node to post the message on the specified message queue. If the task to be unblocked resides on a different node from the message queue, then the message is forwarded to the appropriate node, the waiting task is unblocked, and the proxy used to represent the task is reclaimed. .. raw:: latex \clearpage .. index:: put message at front of queue .. index:: rtems_message_queue_urgent .. _rtems_message_queue_urgent: MESSAGE_QUEUE_URGENT - Put message at front of a queue ------------------------------------------------------ **CALLING SEQUENCE:** .. code-block:: c rtems_status_code rtems_message_queue_urgent( rtems_id id, const void *buffer, size_t size ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - message sent successfully * - ``RTEMS_INVALID_ID`` - invalid queue id * - ``RTEMS_INVALID_SIZE`` - invalid message size * - ``RTEMS_INVALID_ADDRESS`` - ``buffer`` is NULL * - ``RTEMS_UNSATISFIED`` - out of message buffers * - ``RTEMS_TOO_MANY`` - queue's limit has been reached DESCRIPTION: This directive sends the message buffer of size bytes in length to the queue specified by id. If a task is waiting on the queue, then the message is copied to the task's buffer and the task is unblocked. If no tasks are waiting on the queue, then the message is copied to a message buffer which is obtained from this message queue's message buffer pool. The message buffer is then placed at the front of the queue. NOTES: The calling task will be preempted if it has preemption enabled and a higher priority task is unblocked as the result of this directive. Sending a message to a global message queue which does not reside on the local node will generate a request telling the remote node to post the message on the specified message queue. If the task to be unblocked resides on a different node from the message queue, then the message is forwarded to the appropriate node, the waiting task is unblocked, and the proxy used to represent the task is reclaimed. .. raw:: latex \clearpage .. index:: broadcast message to a queue .. index:: rtems_message_queue_broadcast .. _rtems_message_queue_broadcast: MESSAGE_QUEUE_BROADCAST - Broadcast N messages to a queue --------------------------------------------------------- CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_message_queue_broadcast( rtems_id id, const void *buffer, size_t size, uint32_t *count ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - message broadcasted successfully * - ``RTEMS_INVALID_ID`` - invalid queue id * - ``RTEMS_INVALID_ADDRESS`` - ``buffer`` is NULL * - ``RTEMS_INVALID_ADDRESS`` - ``count`` is NULL * - ``RTEMS_INVALID_SIZE`` - invalid message size DESCRIPTION: This directive causes all tasks that are waiting at the queue specified by id to be unblocked and sent the message contained in buffer. Before a task is unblocked, the message buffer of size byes in length is copied to that task's message buffer. The number of tasks that were unblocked is returned in count. NOTES: The calling task will be preempted if it has preemption enabled and a higher priority task is unblocked as the result of this directive. The execution time of this directive is directly related to the number of tasks waiting on the message queue, although it is more efficient than the equivalent number of invocations of ``rtems_message_queue_send``. Broadcasting a message to a global message queue which does not reside on the local node will generate a request telling the remote node to broadcast the message to the specified message queue. When a task is unblocked which resides on a different node from the message queue, a copy of the message is forwarded to the appropriate node, the waiting task is unblocked, and the proxy used to represent the task is reclaimed. .. raw:: latex \clearpage .. index:: receive message from a queue .. index:: rtems_message_queue_receive .. _rtems_message_queue_receive: MESSAGE_QUEUE_RECEIVE - Receive message from a queue ---------------------------------------------------- CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_message_queue_receive( rtems_id id, void *buffer, size_t *size, rtems_option option_set, rtems_interval timeout ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - message received successfully * - ``RTEMS_INVALID_ID`` - invalid queue id * - ``RTEMS_INVALID_ADDRESS`` - ``buffer`` is NULL * - ``RTEMS_INVALID_ADDRESS`` - ``size`` is NULL * - ``RTEMS_UNSATISFIED`` - queue is empty * - ``RTEMS_TIMEOUT`` - timed out waiting for message * - ``RTEMS_OBJECT_WAS_DELETED`` - queue deleted while waiting DESCRIPTION: This directive receives a message from the message queue specified in id. The ``RTEMS_WAIT`` and ``RTEMS_NO_WAIT`` options of the options parameter allow the calling task to specify whether to wait for a message to become available or return immediately. For either option, if there is at least one message in the queue, then it is copied to buffer, size is set to return the length of the message in bytes, and this directive returns immediately with a successful return code. The buffer has to be big enough to receive a message of the maximum length with respect to this message queue. If the calling task chooses to return immediately and the queue is empty, then a status code indicating this condition is returned. If the calling task chooses to wait at the message queue and the queue is empty, then the calling task is placed on the message wait queue and blocked. If the queue was created with the ``RTEMS_PRIORITY`` option specified, then the calling task is inserted into the wait queue according to its priority. But, if the queue was created with the ``RTEMS_FIFO`` option specified, then the calling task is placed at the rear of the wait queue. A task choosing to wait at the queue can optionally specify a timeout value in the timeout parameter. The timeout parameter specifies the maximum interval to wait before the calling task desires to be unblocked. If it is set to ``RTEMS_NO_TIMEOUT``, then the calling task will wait forever. NOTES: The following message receive option constants are defined by RTEMS: .. list-table:: :class: rtems-table * - ``RTEMS_WAIT`` - task will wait for a message (default) * - ``RTEMS_NO_WAIT`` - task should not wait Receiving a message from a global message queue which does not reside on the local node will generate a request to the remote node to obtain a message from the specified message queue. If no message is available and ``RTEMS_WAIT`` was specified, then the task must be blocked until a message is posted. A proxy is allocated on the remote node to represent the task until the message is posted. A clock tick is required to support the timeout functionality of this directive. .. raw:: latex \clearpage .. index:: get number of pending messages .. index:: rtems_message_queue_get_number_pending .. _rtems_message_queue_get_number_pending: MESSAGE_QUEUE_GET_NUMBER_PENDING - Get number of messages pending on a queue ---------------------------------------------------------------------------- CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_message_queue_get_number_pending( rtems_id id, uint32_t *count ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - number of messages pending returned successfully * - ``RTEMS_INVALID_ADDRESS`` - ``count`` is NULL * - ``RTEMS_INVALID_ID`` - invalid queue id DESCRIPTION: This directive returns the number of messages pending on this message queue in count. If no messages are present on the queue, count is set to zero. NOTES: Getting the number of pending messages on a global message queue which does not reside on the local node will generate a request to the remote node to actually obtain the pending message count for the specified message queue. .. raw:: latex \clearpage .. index:: flush messages on a queue .. index:: rtems_message_queue_flush .. _rtems_message_queue_flush: MESSAGE_QUEUE_FLUSH - Flush all messages on a queue --------------------------------------------------- CALLING SEQUENCE: .. code-block:: c rtems_status_code rtems_message_queue_flush( rtems_id id, uint32_t *count ); DIRECTIVE STATUS CODES: .. list-table:: :class: rtems-table * - ``RTEMS_SUCCESSFUL`` - message queue flushed successfully * - ``RTEMS_INVALID_ADDRESS`` - ``count`` is NULL * - ``RTEMS_INVALID_ID`` - invalid queue id DESCRIPTION: This directive removes all pending messages from the specified queue id. The number of messages removed is returned in count. If no messages are present on the queue, count is set to zero. NOTES: Flushing all messages on a global message queue which does not reside on the local node will generate a request to the remote node to actually flush the specified message queue.