.. SPDX-License-Identifier: CC-BY-SA-4.0 .. Copyright (C) 1988, 2008 On-Line Applications Research Corporation (OAR) .. index:: configuring a system .. _Configuring a System: Configuring a System ******************** .. toctree:: intro general classic-api classic-init-task posix-api posix-init-thread task-stack-alloc msg-queue-buffer filesystem bdbuf bsp-related idle-task scheduler-general scheduler-clustered device-driver mpci PCI Library Configuration ========================= This section defines the system configuration parameters supported by ``rtems/confdefs.h`` related to configuring the PCI Library for RTEMS. The PCI Library startup behaviour can be configured in four different ways depending on how ``CONFIGURE_PCI_CONFIG_LIB`` is defined: .. index:: PCI_LIB_AUTO ``PCI_LIB_AUTO`` Used to enable the PCI auto configuration software. PCI will be automatically probed, PCI buses enumerated, all devices and bridges will be initialized using Plug & Play software routines. The PCI device tree will be populated based on the PCI devices found in the system, PCI devices will be configured by allocating address region resources automatically in PCI space according to the BSP or host bridge driver set up. .. index:: PCI_LIB_READ ``PCI_LIB_READ`` Used to enable the PCI read configuration software. The current PCI configuration is read to create the RAM representation (the PCI device tree) of the PCI devices present. PCI devices are assumed to already have been initialized and PCI buses enumerated, it is therefore required that a BIOS or a boot loader has set up configuration space prior to booting into RTEMS. .. index:: PCI_LIB_STATIC ``PCI_LIB_STATIC`` Used to enable the PCI static configuration software. The user provides a PCI tree with information how all PCI devices are to be configured at compile time by linking in a custom ``struct pci_bus pci_hb`` tree. The static PCI library will not probe PCI for devices, instead it will assume that all devices defined by the user are present, it will enumerate the PCI buses and configure all PCI devices in static configuration accordingly. Since probe and allocation software is not needed the startup is faster, has smaller footprint and does not require dynamic memory allocation. .. index:: PCI_LIB_PERIPHERAL ``PCI_LIB_PERIPHERAL`` Used to enable the PCI peripheral configuration. It is similar to ``PCI_LIB_STATIC``, but it will never write the configuration to the PCI devices since PCI peripherals are not allowed to access PCI configuration space. Note that selecting ``PCI_LIB_STATIC`` or ``PCI_LIB_PERIPHERAL`` but not defining ``pci_hb`` will reuslt in link errors. Note also that in these modes Plug & Play is not performed. Event Recording Configuration ============================= .. index:: CONFIGURE_RECORD_EXTENSIONS_ENABLED .. _CONFIGURE_RECORD_EXTENSIONS_ENABLED: CONFIGURE_RECORD_EXTENSIONS_ENABLED ----------------------------------- CONSTANT: ``CONFIGURE_RECORD_EXTENSIONS_ENABLED`` DATA TYPE: Boolean feature macro. RANGE: Defined or undefined. DEFAULT VALUE: This is not defined by default. DESCRIPTION: If defined and :ref:`CONFIGURE_RECORD_PER_PROCESSOR_ITEMS ` is also defined properly, then the record extensions are enabled. NOTES: The record extensions capture thread create, start, restart, delete, switch, begin, exitted and terminate events. .. index:: CONFIGURE_RECORD_PER_PROCESSOR_ITEMS .. _CONFIGURE_RECORD_PER_PROCESSOR_ITEMS: CONFIGURE_RECORD_PER_PROCESSOR_ITEMS ------------------------------------ CONSTANT: ``CONFIGURE_RECORD_PER_PROCESSOR_ITEMS`` DATA TYPE: Unsigned integer (``unsigned int``). RANGE: A power of two greater than or equal to 16. DEFAULT VALUE: This is not defined by default. DESCRIPTION: If defined, then a record item buffer of the specified item count is statically allocated for each configured processor (:ref:`CONFIGURE_MAXIMUM_PROCESSORS `). NOTES: None. .. _ConfigAda: Ada Configuration ================= The GNU Ada runtime library (libgnarl) uses threads, mutexes, condition variables, and signals from the pthreads API. It uses also thread-local storage for the Ada Task Control Block (ATCB). From these resources only the threads need to be accounted for in the configuration. You should include the Ada tasks in your setting of the :ref:`CONFIGURE_MAXIMUM_POSIX_THREADS` configuration option. Obsolete Configuration Options ============================== .. index:: CONFIGURE_BDBUF_BUFFER_COUNT CONFIGURE_BDBUF_BUFFER_COUNT ---------------------------- This configuration option was introduced in RTEMS 4.7.0 and is obsolete since RTEMS 4.10.0. .. index:: CONFIGURE_BDBUF_BUFFER_SIZE CONFIGURE_BDBUF_BUFFER_SIZE --------------------------- This configuration option was introduced in RTEMS 4.7.0 and is obsolete since RTEMS 4.10.0. .. index:: CONFIGURE_DISABLE_CLASSIC_API_NOTEPADS CONFIGURE_DISABLE_CLASSIC_API_NOTEPADS -------------------------------------- This configuration option was introduced in RTEMS 4.9.0 and is obsolete since RTEMS 5.1. .. index:: CONFIGURE_ENABLE_GO CONFIGURE_ENABLE_GO ------------------- This configuration option is obsolete since RTEMS 5.1. .. index:: CONFIGURE_GNAT_RTEMS CONFIGURE_GNAT_RTEMS -------------------- This configuration option was present in all RTEMS versions since at 1997 and is obsolete since RTEMS 5.1. See also :ref:`ConfigAda`. .. index:: CONFIGURE_HAS_OWN_CONFIGURATION_TABLE CONFIGURE_HAS_OWN_CONFIGURATION_TABLE ------------------------------------- This configuration option is obsolete since RTEMS 5.1. .. index:: CONFIGURE_HAS_OWN_BDBUF_TABLE CONFIGURE_HAS_OWN_BDBUF_TABLE ----------------------------- This configuration option was introduced in RTEMS 4.7.0 and is obsolete since RTEMS 4.10.0. .. index:: CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE ------------------------------------- This configuration option was present in all RTEMS versions since at least 1995 and is obsolete since RTEMS 5.1. .. index:: CONFIGURE_HAS_OWN_INIT_TASK_TABLE .. _CONFIGURE_HAS_OWN_INIT_TASK_TABLE: CONFIGURE_HAS_OWN_INIT_TASK_TABLE --------------------------------- This configuration option was present in all RTEMS versions since at least 1995 and is obsolete since RTEMS 5.1. If you used this configuration option or you think that there should be a way to configure more than one Classic API initialization task, then please ask on the :r:list:`users`. .. index:: CONFIGURE_HAS_OWN_MOUNT_TABLE CONFIGURE_HAS_OWN_MOUNT_TABLE ----------------------------- This configuration option is obsolete since RTEMS 5.1. .. index:: CONFIGURE_HAS_OWN_MULTIPROCESSING_TABLE CONFIGURE_HAS_OWN_MULTIPROCESSING_TABLE --------------------------------------- This configuration option is obsolete since RTEMS 5.1. .. index:: CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS -------------------------------- This configuration option was present in all RTEMS versions since at 1998 and is obsolete since RTEMS 5.1. See also :ref:`CONFIGURE_MAXIMUM_FILE_DESCRIPTORS`. .. index:: CONFIGURE_MAXIMUM_ADA_TASKS CONFIGURE_MAXIMUM_ADA_TASKS --------------------------- This configuration option was present in all RTEMS versions since at 1997 and is obsolete since RTEMS 5.1. See also :ref:`ConfigAda`. .. index:: CONFIGURE_MAXIMUM_FAKE_ADA_TASKS CONFIGURE_MAXIMUM_FAKE_ADA_TASKS -------------------------------- This configuration option was present in all RTEMS versions since at 1997 and is obsolete since RTEMS 5.1. See also :ref:`ConfigAda`. .. index:: CONFIGURE_MAXIMUM_GO_CHANNELS CONFIGURE_MAXIMUM_GO_CHANNELS ----------------------------- This configuration option is obsolete since RTEMS 5.1. .. index:: CONFIGURE_MAXIMUM_GOROUTINES CONFIGURE_MAXIMUM_GOROUTINES ---------------------------- This configuration option is obsolete since RTEMS 5.1. .. index:: CONFIGURE_MAXIMUM_MRSP_SEMAPHORES CONFIGURE_MAXIMUM_MRSP_SEMAPHORES --------------------------------- This configuration option is obsolete since RTEMS 5.1. .. index:: CONFIGURE_NUMBER_OF_TERMIOS_PORTS CONFIGURE_NUMBER_OF_TERMIOS_PORTS --------------------------------- This configuration option is obsolete since RTEMS 5.1. .. index:: CONFIGURE_MAXIMUM_POSIX_BARRIERS CONFIGURE_MAXIMUM_POSIX_BARRIERS -------------------------------- This configuration option is obsolete since RTEMS 5.1. .. index:: CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES ------------------------------------------- This configuration option is obsolete since RTEMS 5.1. .. index:: CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS ------------------------------- This configuration option was introduced in RTEMS 4.10.0 and is obsolete since RTEMS 5.1. .. index:: CONFIGURE_MAXIMUM_POSIX_MUTEXES CONFIGURE_MAXIMUM_POSIX_MUTEXES ------------------------------- This configuration option is obsolete since RTEMS 5.1. .. index:: CONFIGURE_MAXIMUM_POSIX_RWLOCKS CONFIGURE_MAXIMUM_POSIX_RWLOCKS ------------------------------- This configuration option is obsolete since RTEMS 5.1. .. index:: CONFIGURE_MAXIMUM_POSIX_SPINLOCKS CONFIGURE_MAXIMUM_POSIX_SPINLOCKS --------------------------------- This configuration option is obsolete since RTEMS 5.1. .. index:: CONFIGURE_POSIX_HAS_OWN_INIT_THREAD_TABLE .. _CONFIGURE_POSIX_HAS_OWN_INIT_THREAD_TABLE: CONFIGURE_POSIX_HAS_OWN_INIT_THREAD_TABLE ----------------------------------------- This configuration option was present in all RTEMS versions since at least 1995 and is obsolete since RTEMS 5.1. If you used this configuration option or you think that there should be a way to configure more than one POSIX initialization thread, then please ask on the :r:list:`users`. .. index:: CONFIGURE_SMP_APPLICATION CONFIGURE_SMP_APPLICATION ------------------------- This configuration option was introduced in RTEMS 4.11.0 and is obsolete since RTEMS 5.1. .. index:: CONFIGURE_SMP_MAXIMUM_PROCESSORS CONFIGURE_SMP_MAXIMUM_PROCESSORS -------------------------------- This configuration option was introduced in RTEMS 4.11.0 and is obsolete since RTEMS 5.1. See also :ref:`CONFIGURE_MAXIMUM_PROCESSORS`. .. index:: CONFIGURE_TERMIOS_DISABLED CONFIGURE_TERMIOS_DISABLED -------------------------- This configuration option is obsolete since RTEMS 5.1.