.. comment SPDX-License-Identifier: CC-BY-SA-4.0 .. COMMENT: COPYRIGHT (c) 1988-2008. .. COMMENT: On-Line Applications Research Corporation (OAR). .. COMMENT: All rights reserved. Initialization Code ################### Introduction ============ The initialization code is the first piece of code executed when there's a reset/reboot. Its purpose is to initialize the board for the application. This chapter contains a narrative description of the initialization process followed by a description of each of the files and routines commonly found in the BSP related to initialization. The remainder of this chapter covers special issues which require attention such as interrupt vector table and chip select initialization. Most of the examples in this chapter will be based on the SPARC/ERC32 and m68k/gen68340 BSP initialization code. Like most BSPs, the initialization for these BSP is divided into two subdirectories under the BSP source directory. The BSP source code for these BSPs is in the following directories: .. code-block:: shell c/src/lib/libbsp/m68k/gen68340 c/src/lib/libbsp/sparc/erc32 Both BSPs contain startup code written in assembly language and C. The gen68340 BSP has its early initialization start code in the ``start340`` subdirectory and its C startup code in the ``startup`` directory. In the ``start340`` directory are two source files. The file ``startfor340only.s`` is the simpler of these files as it only has initialization code for a MC68340 board. The file ``start340.s`` contains initialization for a 68349 based board as well. Similarly, the ERC32 BSP has startup code written in assembly language and C. However, this BSP shares this code with other SPARC BSPs. Thus the ``Makefile.am`` explicitly references the following files for this functionality. .. code-block:: shell ../../sparc/shared/start.S .. note:: In most BSPs, the directory named ``start340`` in the gen68340 BSP would be simply named ``start`` or start followed by a BSP designation. Required Global Variables ========================= Although not strictly part of initialization, there are a few global variables assumed to exist by reusable device drivers. These global variables should only defined by the BSP when using one of these device drivers. The BSP author probably should be aware of the ``Configuration`` Table structure generated by ```` during debug but should not explicitly reference it in the source code. There are helper routines provided by RTEMS to access individual fields. In older RTEMS versions, the BSP included a number of required global variables. We have made every attempt to eliminate these in the interest of simplicity. Board Initialization ==================== This section describes the steps an application goes through from the time the first BSP code is executed until the first application task executes. The initialization flows from assembly language start code to the shared ``bootcard.c`` framework then through the C Library, RTEMS, device driver initialization phases, and the context switch to the first application task. After this, the application executes until it calls ``exit``, ``rtems_shutdown_executive``, or some other normal termination initiating routine and a fatal system state is reached. The optional ``bsp_fatal_extension`` initial extension can perform BSP specific system termination. The routines invoked during this will be discussed and their location in the RTEMS source tree pointed out as we discuss each. Start Code - Assembly Language Initialization --------------------------------------------- The assembly language code in the directory ``start`` is the first part of the application to execute. It is responsible for initializing the processor and board enough to execute the rest of the BSP. This includes: - initializing the stack - zeroing out the uninitialized data section ``.bss`` - disabling external interrupts - copy the initialized data from ROM to RAM The general rule of thumb is that the start code in assembly should do the minimum necessary to allow C code to execute to complete the initialization sequence. The initial assembly language start code completes its execution by invoking the shared routine ``boot_card()``. The label (symbolic name) associated with the starting address of the program is typically called ``start``. The start object file is the first object file linked into the program image so it is ensured that the start code is at offset 0 in the ``.text`` section. It is the responsibility of the linker script in conjunction with the compiler specifications file to put the start code in the correct location in the application image. boot_card() - Boot the Card --------------------------- The ``boot_card()`` is the first C code invoked. This file is the core component in the RTEMS BSP Initialization Framework and provides the proper sequencing of initialization steps for the BSP, RTEMS and device drivers. All BSPs use the same shared version of ``boot_card()`` which is located in the following file: .. code-block:: shell c/src/lib/libbsp/shared/bootcard.c The ``boot_card()`` routine performs the following functions: - It disables processor interrupts. - It sets the command line argument variables for later use by the application. - It invokes the BSP specific routine ``bsp_work_area_initialize()`` which is supposed to initialize the RTEMS Workspace and the C Program Heap. Usually the default implementation in ``c/src/lib/libbsp/shared/bspgetworkarea.c`` should be sufficient. Custom implementations can use ``bsp_work_area_initialize_default()`` or ``bsp_work_area_initialize_with_table()`` available as inline functions from``#include ``. - It invokes the BSP specific routine ``bsp_start()`` which is written in C and thus able to perform more advanced initialization. Often MMU, bus and interrupt controller initialization occurs here. Since the RTEMS Workspace and the C Program Heap was already initialized by ``bsp_work_area_initialize()``, this routine may use ``malloc()``, etc. - It invokes the RTEMS directive ``rtems_initialize_data_structures()`` to initialize the RTEMS executive to a state where objects can be created but tasking is not enabled. - It invokes the BSP specific routine ``bsp_libc_init()`` to initialize the C Library. Usually the default implementation in ``c/src/lib/libbsp/shared/bsplibc.c`` should be sufficient. - It invokes the RTEMS directive ``rtems_initialize_before_drivers()`` to initialize the MPCI Server thread in a multiprocessor configuration and execute API specific extensions. - It invokes the BSP specific routine ``bsp_predriver_hook``. For most BSPs, the implementation of this routine does nothing. - It invokes the RTEMS directive ``rtems_initialize_device_drivers()`` to initialize the statically configured set of device drivers in the order they were specified in the Configuration Table. - It invokes the BSP specific routine ``bsp_postdriver_hook``. For most BSPs, the implementation of this routine does nothing. However, some BSPs use this hook and perform some initialization which must be done at this point in the initialization sequence. This is the last opportunity for the BSP to insert BSP specific code into the initialization sequence. - It invokes the RTEMS directive ``rtems_initialize_start_multitasking()`` which initiates multitasking and performs a context switch to the first user application task and may enable interrupts as a side-effect of that context switch. The context switch saves the executing context. The application runs now. The directive ``rtems_shutdown_executive()`` will return to the saved context. The ``exit()`` function will use this directive. After a return to the saved context a fatal system state is reached. The fatal source is ``RTEMS_FATAL_SOURCE_EXIT`` with a fatal code set to the value passed to rtems_shutdown_executive(). The enabling of interrupts during the first context switch is often the source for fatal errors during BSP development because the BSP did not clear and/or disable all interrupt sources and a spurious interrupt will occur. When in the context of the first task but before its body has been entered, any C++ Global Constructors will be invoked. That's it. We just went through the entire sequence. bsp_work_area_initialize() - BSP Specific Work Area Initialization ------------------------------------------------------------------ This is the first BSP specific C routine to execute during system initialization. It must initialize the support for allocating memory from the C Program Heap and RTEMS Workspace commonly referred to as the work areas. Many BSPs place the work areas at the end of RAM although this is certainly not a requirement. Usually the default implementation in:file:`c/src/lib/libbsp/shared/bspgetworkarea.c` should be sufficient. Custom implementations can use ``bsp_work_area_initialize_default()`` or``bsp_work_area_initialize_with_table()`` available as inline functions from ``#include ``. bsp_start() - BSP Specific Initialization ----------------------------------------- This is the second BSP specific C routine to execute during system initialization. It is called right after ``bsp_work_area_initialize()``. The ``bsp_start()`` routine often performs required fundamental hardware initialization such as setting bus controller registers that do not have a direct impact on whether or not C code can execute. The interrupt controllers are usually initialized here. The source code for this routine is usually found in the file :file:`c/src/lib/libbsp/${CPU}/${BSP}/startup/bspstart.c`. It is not allowed to create any operating system objects, e.g. RTEMS semaphores. After completing execution, this routine returns to the ``boot_card()`` routine. In case of errors, the initialization should be terminated via ``bsp_fatal()``. bsp_predriver_hook() - BSP Specific Predriver Hook -------------------------------------------------- The ``bsp_predriver_hook()`` method is the BSP specific routine that is invoked immediately before the the device drivers are initialized. RTEMS initialization is complete but interrupts and tasking are disabled. The BSP may use the shared version of this routine which is empty. Most BSPs do not provide a specific implementation of this callback. Device Driver Initialization ---------------------------- At this point in the initialization sequence, the initialization routines for all of the device drivers specified in the Device Driver Table are invoked. The initialization routines are invoked in the order they appear in the Device Driver Table. The Driver Address Table is part of the RTEMS Configuration Table. It defines device drivers entry points (initialization, open, close, read, write, and control). For more information about this table, please refer to the *Configuring a System* chapter in the *RTEMS Application C User's Guide*. The RTEMS initialization procedure calls the initialization function for every driver defined in the RTEMS Configuration Table (this allows one to include only the drivers needed by the application). All these primitives have a major and a minor number as arguments: - the major number refers to the driver type, - the minor number is used to control two peripherals with the same driver (for instance, we define only one major number for the serial driver, but two minor numbers for channel A and B if there are two channels in the UART). RTEMS Postdriver Callback ------------------------- The ``bsp_postdriver_hook()`` BSP specific routine is invoked immediately after the the device drivers and MPCI are initialized. Interrupts and tasking are disabled. Most BSPs use the shared implementation of this routine which is responsible for opening the device ``/dev/console`` for standard input, output and error if the application has configured the Console Device Driver. This file is located at: .. code-block:: shell c/src/lib/libbsp/shared/bsppost.c The Interrupt Vector Table ========================== The Interrupt Vector Table is called different things on different processor families but the basic functionality is the same. Each entry in the Table corresponds to the handler routine for a particular interrupt source. When an interrupt from that source occurs, the specified handler routine is invoked. Some context information is saved by the processor automatically when this happens. RTEMS saves enough context information so that an interrupt service routine can be implemented in a high level language. On some processors, the Interrupt Vector Table is at a fixed address. If this address is in RAM, then usually the BSP only has to initialize it to contain pointers to default handlers. If the table is in ROM, then the application developer will have to take special steps to fill in the table. If the base address of the Interrupt Vector Table can be dynamically changed to an arbitrary address, then the RTEMS port to that processor family will usually allocate its own table and install it. For example, on some members of the Motorola MC68xxx family, the Vector Base Register (``vbr``) contains this base address. Interrupt Vector Table on the gen68340 BSP ------------------------------------------ The gen68340 BSP provides a default Interrupt Vector Table in the file ``$BSP_ROOT/start340/start340.s``. After the ``entry`` label is the definition of space reserved for the table of interrupts vectors. This space is assigned the symbolic name of ``__uhoh`` in the ``gen68340`` BSP. At ``__uhoh`` label is the default interrupt handler routine. This routine is only called when an unexpected interrupts is raised. One can add their own routine there (in that case there's a call to a routine - $BSP_ROOT/startup/dumpanic.c - that prints which address caused the interrupt and the contents of the registers, stack, etc.), but this should not return. Chip Select Initialization ========================== When the microprocessor accesses a memory area, address decoding is handled by an address decoder, so that the microprocessor knows which memory chip(s) to access. The following figure illustrates this: .. code-block:: c +-------------------+ ------------| | ------------| |------------ ------------| Address |------------ ------------| Decoder |------------ ------------| |------------ ------------| | +-------------------+ CPU Bus Chip Select The Chip Select registers must be programmed such that they match the ``linkcmds`` settings. In the gen68340 BSP, ROM and RAM addresses can be found in both the ``linkcmds`` and initialization code, but this is not a great way to do this. It is better to define addresses in the linker script. Integrated Processor Registers Initialization ============================================= The CPUs used in many embedded systems are highly complex devices with multiple peripherals on the CPU itself. For these devices, there are always some specific integrated processor registers that must be initialized. Refer to the processors' manuals for details on these registers and be VERY careful programming them. Data Section Recopy =================== The next initialization part can be found in ``$BSP340_ROOT/start340/init68340.c``. First the Interrupt Vector Table is copied into RAM, then the data section recopy is initiated (``_CopyDataClearBSSAndStart`` in ``$BSP340_ROOT/start340/startfor340only.s``). This code performs the following actions: - copies the .data section from ROM to its location reserved in RAM (see :ref:`Initialized Data` for more details about this copy), - clear ``.bss`` section (all the non-initialized data will take value 0). The RTEMS Configuration Table ============================= The RTEMS configuration table contains the maximum number of objects RTEMS can handle during the application (e.g. maximum number of tasks, semaphores, etc.). It's used to allocate the size for the RTEMS inner data structures. The RTEMS configuration table is application dependent, which means that one has to provide one per application. It is usually defined by defining macros and including the header file ````. In simple applications such as the tests provided with RTEMS, it is commonly found in the main module of the application. For more complex applications, it may be in a file by itself. The header file ```` defines a constant table named ``Configuration``. With RTEMS 4.8 and older, it was accepted practice for the BSP to copy this table into a modifiable copy named ``BSP_Configuration``. This copy of the table was modified to define the base address of the RTEMS Executive Workspace as well as to reflect any BSP and device driver requirements not automatically handled by the application. In 4.9 and newer, we have eliminated the BSP copies of the configuration tables and are making efforts to make the configuration information generated by ```` constant and read only. For more information on the RTEMS Configuration Table, refer to the *RTEMS Application C User's Guide*.