From 9ef41e4ebd0498a86c914948c368b2d0bed0db6b Mon Sep 17 00:00:00 2001 From: Gedare Bloom Date: Thu, 3 Nov 2022 09:56:32 -0600 Subject: eng, user: update bsp_list to bsplist --- user/bld/index.rst | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'user') diff --git a/user/bld/index.rst b/user/bld/index.rst index d75cb5d..18092d2 100644 --- a/user/bld/index.rst +++ b/user/bld/index.rst @@ -54,7 +54,7 @@ Work Flow There are five steps necessary to build and install one or more BSPs. 1. Select which BSPs you want to build. See also :ref:`BSPs` and - ``./waf bsp_list``. + ``./waf bsplist``. 2. Write a BSP build configuration file (e.g. ``config.ini``) which determines which BSPs are built and how they are configured. @@ -93,7 +93,7 @@ Use ``./waf --help`` to get a list of commands and options. BSP List -------- -The BSP list command ``./waf bsp_list`` loads the build specification items and +The BSP list command ``./waf bsplist`` loads the build specification items and generates a list of base BSPs from it. The list is sorted by architecture and base BSP name. Which base BSPs are listed can be controlled by the ``--rtems-bsps`` command line option. It expects a comma-separated list of @@ -103,7 +103,7 @@ items can be specified by the ``--rtems-specs`` command line option. .. code-block:: none - $ ./waf bsp_list --rtems-bsps=sparc/ + $ ./waf bsplist --rtems-bsps=sparc/ sparc/at697f sparc/erc32 sparc/gr712rc @@ -115,7 +115,7 @@ items can be specified by the ``--rtems-specs`` command line option. .. code-block:: none - $ ./waf bsp_list --rtems-bsps='/leon,/rv64imac$' + $ ./waf bsplist --rtems-bsps='/leon,/rv64imac$' riscv/rv64imac sparc/leon2 sparc/leon3 @@ -186,7 +186,7 @@ name. This one line configuration file is sufficient to build the base BSP `sparc/erc32` with default values for all options. The base BSPs are determined -by the build specification. The ``./waf bsp_list`` command lists all base BSPs. +by the build specification. The ``./waf bsplist`` command lists all base BSPs. You can create your own BSP names. However, in this case you have to inherit from a base BSP. The inheritance works only within an architecture, e.g. a `riscv` BSP cannot inherit options from an `arm` BSP. -- cgit v1.2.3