From a34c157d08ef2beaf7ff0f6930a0fce5ecf581cb Mon Sep 17 00:00:00 2001 From: Chris Johns Date: Thu, 24 Mar 2016 09:33:29 +1100 Subject: Corrections from Worth Burruss. Many thanks. --- user/start/development.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'user/start/development.rst') diff --git a/user/start/development.rst b/user/start/development.rst index 45f9f03..9cc7744 100644 --- a/user/start/development.rst +++ b/user/start/development.rst @@ -20,8 +20,8 @@ Please read :ref:`development-hosts` before continuing. time to time. The following procedure assumes you have installed and configured your host -operating. It also assumes you have installed any dependent packages needed -when building the tools and the kernel. +operating system. It also assumes you have installed any dependent packages +needed when building the tools and the kernel. You need to select a location to build and install the RTEMS Tool chain and RTEMS. Make sure there is plenty of disk space and a fast disk is @@ -32,7 +32,7 @@ you can do this without needing to be root. You can also use The location used to install the tools and kernel is called the `prefix`. It is best to have a `prefix` for each different version of RTEMS you are using. If -you are using RTEMS 4.11 in production it is not a good to install a +you are using RTEMS 4.11 in production it is not a good idea to install a development version of 4.12 over the top. A separate `prefix` for each version avoids this. @@ -590,7 +590,7 @@ When you save and exit the editor git will report the commit's status: 1 file changed, 1 insertion(+), 1 deletion(-) You can either email the patch to :r:list:`devel` with the following git -command: +command, and it is `minus one` on the command line: .. code-block:: shell -- cgit v1.2.3