From 6baa2d628b3e16a9a816a5f05dceffc120d75eca Mon Sep 17 00:00:00 2001 From: Utkarsh Verma Date: Thu, 23 Mar 2023 09:10:47 +0530 Subject: bsp-howto: Fix grammar and improve coherence. --- user/start/bsp-build.rst | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) (limited to 'user/start/bsp-build.rst') diff --git a/user/start/bsp-build.rst b/user/start/bsp-build.rst index 8401d71..585d009 100644 --- a/user/start/bsp-build.rst +++ b/user/start/bsp-build.rst @@ -99,16 +99,9 @@ If you have built a BSP with the RSB, you can move on to Manual BSP Build ---------------- -We manually build the BSP in four steps. The first step is to create a build -directory. It must be separate from the RTEMS source directory. We use -:file:`$HOME/quick-start/build/b-erc32`. - -.. code-block:: none - - mkdir -p $HOME/quick-start/build/b-erc32 - -The second step is to set your path. Prepend the RTEMS tool suite binary -directory to your ``$PATH`` throughout the remaining steps. Run the command: +We manually build the BSP in four steps. The first step is to set your path. +Prepend the RTEMS tool suite binary directory to your ``$PATH`` throughout the +remaining steps. Run the command: .. code-block:: none @@ -133,7 +126,7 @@ has not been correctly set. Check the contents of the path file cannot be found return to :ref:`QuickStartTools` and install the tools again. -The first step is to configure the BSP. There are various BSP build +The second step is to configure the BSP. There are various BSP build configuration options available. Some options are BSP-specific. Each section in the INI-style configuration file ``config.ini`` instructs the build system to build a particular BSP variant (`sparc/erc32` in our case). We enable the build @@ -179,7 +172,7 @@ by ``$BASE``. Checking for program 'xz' : $BASE/anaconda3/bin/xz 'configure' finished successfully (0.414s) -Building the BSP is the second step. +Building the BSP is the third step. .. code-block:: none -- cgit v1.2.3